VLVolodymyr V. Levenets

Volodymyr V. Levenets

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Volodymyr V. Levenets has a total of 64 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • INFLUENCE OF THE FRACTIONAL COMPOSITION OF ZEOLITES ON CESIUM SORPTION FROM AQUEOUS SOLUTIONS

    by O.YU. Lonin, V.V. Levenets, O.P. Omelnik, A.O. Shur

    The influence of the fractional composition of zeolites on the sorption of cesium ions from aqueous solutions was investigated. It was established that the 0.1 mm fraction is the most effective for application under static conditions. The sorption coefficient for the 0.1 mm fraction of clinoptilolite was 79.50%. Synthetic zeolites demonstrated lower sorption coefficients for the 0.1 mm fraction (zeolite NaA – 75.00%, zeolite NaX – 68.70%). Under dynamic sorption conditions, the 3…5 mm zeolite fraction proved to be the most effective. The highest dynamic sorption efficiencies were observed for clinoptilolite (82.46%) and synthetic zeolite NaX (82.45%). The obtained results provide substantiated recommendations for the use of zeolites in Ukraine's nuclear power industry.

  • NUCLEAR ENERGY MATERIALS RESEARCH

    by L.S. Glazunov, V.V. Levenets, O.YU. Lonin, O.P. Omelnyk, A.O. Shchur

    The characteristics of the equipment used in the analytical nuclear physics complex for determining the elemental composition and distribution of elements (isotopes) in a solid are shown. Depending on the equipment used, different errors, ranges of elements, etc. are possible. Studies of materials developed or modified for use in nuclear power engineering are presented.

  • Open Access

    Possibilities of Using Ukrainian Clinoptilolite (Sokyrnytsia Deposit) in Nuclear Energy

    by Oleksii Yu. Lonin, Volodymyr V. Levenets, Oleksandr P. Omelnyk, Andriy O. Shchur

    The clinoptilolite from the Sokyrnytsia deposit belongs to the zeolite family and is known for its application as sorbents in nuclear energy. The sorption of cesium, strontium, cobalt, and europium ions by clinoptilolite has been studied. The research examined how the composition and structure of clinoptilolite influence sorption. Sorption properties were assessed using the sorption coefficient, which quantitatively measures clinoptilolite's interaction with radionuclides. The results revealed that clinoptilolite exhibits the highest sorption efficiency for cesium (87.0%) and strontium (80.5%). Europium showed a sorption efficiency of 73.0%, while cobalt exhibited a lower sorption efficiency of 60.0%. The study established an ion exchange sequence for these ions in the sorption process and observed a dependency on the ionic radius of the sorbed ions. The presence and concentration of competing ions significantly affected the sorption efficiency. For instance, sodium ions in the solution reduced sorption by up to 25%, depending on the radionuclide. Increased sodium ion concentration caused an additional 26% to 40% sorption reduction. Similarly, tripling the strontium concentration in the solution reduced the sorption effect. The sorption experiments were conducted under both static and dynamic conditions. Radionuclide content was determined using the characteristic X-ray emission (XRE) method. This technique analyzes the characteristic X-ray radiation of radionuclides excited by a proton beam. The experiments were carried out at the analytical nuclear-physical complex "Sokil." Samples were irradiated in the XRE channel, where targets were placed in a cassette within an irradiation chamber under a vacuum of 10−4 Pa. The proton beam, with a current of 200 nA and an energy of 1600 keV, was used to excite the X-ray radiation of cesium, strontium, and cobalt atoms. The characteristic X-ray radiation of the K-series of strontium atoms was detected using two detectors: the XR-100CR Si-PIN X-ray detector and the Ge(HP) detector. Considering its established radionuclide selectivity sequence, the clinoptilolite from the Sokyrnytsia deposit can be utilized in Ukraine's nuclear energy industry.

  • SIMULATION USING GEANT 4 OF AXAS-D SYSTEM WITH REGISTRATION K-SERIES OF IODINE IN ACTIVATED CARBON FOR VENTILATION SYSTEMS NPP

    by O. Zakharchenko, V. Levenets, O. Lonin, S. Sokolov

    The material shows the results of using the Geant4 program to simulate the operation and capabilities of the SKIF stand when recording radiation K-series with detector the AXAS-D of stable iodine in activated carbon, which is used for air purification at the NPP. The radiation spectra obtained in different situations are shown: at the entrance and exit of the measuring installation; and their processing. The parameters of the registration system were obtained – efficiency and dependence on the thickness of the detector crystal.

  • Open Access

    Identification of Heavy Metals Pollution Sources in The Territory Adjacent to NSC “Kharkiv Institute of Physics & Technology” by PMF Method

    by Maryna F. Kozhevnikova, Volodymyr V. Levenets, Oleksii Yu. Lonin, Oleksandr P. Omelnik, Andriy O. Shchur

    In this paper the content of heavy metals at the territory of Pyatihatki settlement, where the National Scientific Center Kharkiv Institute of Physics & Technology (NSC KIPT) is located. The nuclear-physical methods were used to determine the content of chemical elements in the soil samples taken in 30 points at the territory of Pyatihatki settlement in 2011-2021. The elemental analysis was carried out on the analytical nuclear-physical complex "Sokol". The methods, based on registration of characteristic X-ray radiation of atoms and g-radiation of nuclei excited by accelerated protons, were used. After the measurements completion, the data arrays on the content of 15 chemical elements (N, Na, S, Cl, K, Ca, Ti, Mn, Fe, Cu, Zn, Zr, Br, Sr, Pb) in the soil samples were obtained. The data arrays processing was carried out using the EPA (Environmental Protection Agency) PMF v3.0.2.2.2 software based on the application of the PMF (Positive matrix factorisation) algorithm. ArcView 3.2a was chosen as the basic software product for the analysis of spatial distribution of the major polluting chemical elements. As a result of the performed work, the pollution sources, which have an impact on the territory near the NSC KIPT, have been identified. The source of the soil pollution is the autostrades, among which the road around the city Kharkiv stands out, where an increase in the content of Pb, Sr, Zr, Cr and Cu was detected. A source of chromium contamination, located presumably to the north-east of Pyatihatki settlement, was identified. The analyses of the obtained data showed that the PMF method allows to identify the factors that affect the soil contamination, and to determine the presumptive sources of pollution with the help of wind rose.

  • Open Access

    The Influence of a Magnetic Field on the Sorption of Radionuclides by Clinoptilolite and Composite Sorbents Based on Zeolites

    by Oleksii Yu. Lonin, Volodymyr V. Levenets, Oleksandr M. Bovda

    Two methods of using permanent NdFeB magnets and their impact on the sorption of radionuclides (Cs, Sr, Co) by clinoptilolite and composite sorbents based on zeolites are discussed. Sorption processes were considered under dynamic conditions with liquid circulation. No changes in sorption processes were observed when magnetic treatment was applied to solutions containing radionuclide ions. The natural zeolite clinoptilolite and synthetic zeolites NaX and NaA were considered at this stage. In the work, clinoptilolite from the Sokirnitske deposit in the Zakarpattia region of Ukraine was used. Ukraine possesses significant deposits of clinoptilolite. When magnets were applied to the sorbent during the sorption process, an increase in cobalt sorption of 10% was observed for clinoptilolite, and strontium sorption increased by 17%. The influence of a magnet on clinoptilolite is due to the presence of iron ions in the composition of clinoptilolite. The iron content ranges from 0.9% to 2.5%. The composition of the composite sorbent included clinoptilolite and synthetic zeolite NaX. No increase in radionuclide sorption was observed for composite sorbents, likely due to the presence of clinoptilolite in the sorbent composition and the corresponding iron content. The analytical part of the study was carried out using the PIXE (Particle Induced X-ray Emission) method on the analytical nuclear-physics complex "Sokil." The energy range of the accelerator was 200-2000 keV. The complex made it possible to carry out all the main methods of analysis using ion beams. The targets were placed in the exit, at the Chamber for PIXE. To excite the atoms of cesium, strontium, and cobalt a proton beam with an energy of Ер≈1400 keV was used. В роботі розглядається два метода використання постійних магнітів NdFeB та їх вплив на сорбцію радіонуклідів (Cs,Sr,Co) кліноптилолітом та композиційними сорбентами на основі цеолітів. Сорбційні процеси розглядалися в динамічних умовах з циркуляцією рідини. При магнітній обробці розчинів, що містять іони радіонуклідів, змін у сорбційних процесах не спостерігалося. На цьому етапі розглядалися природний цеоліт кліноптилоліт і синтетичні цеоліти NaX і NaA. У роботі використано кліноптилоліт Сокирницького родовища Закарпатської області України. В Україні є значні поклади кліноптилоліту. При застосуванні магнітів до сорбенту в процесі сорбції спостерігалося збільшення сорбції кобальту для кліноптилоліту на 10%, а сорбції стронцію – на 17%. Вплив магніту на кліноптилоліт обумовлений наявністю в складі кліноптилоліту іонів заліза. Вміст заліза коливається від 0,9% до 2,5%. До складу композиційного сорбенту входили кліноптилоліт та синтетичний цеоліт NaX. Збільшення сорбції радіонуклідів для композитних сорбентів не спостерігалося, ймовірно, через наявність у складі сорбенту кліноптилоліту та відповідного вмісту заліза. Аналітичну частину дослідження виконано методом PIXE (Particle Induced X-ray Emission) на аналітичному ядерно-фізичному комплексі «Сокіл». Енергетичний діапазон прискорювача становив 200-2000 кеВ. Комплекс дозволяв проводити всі основні методи аналізу за допомогою іонних променів. Цілі були розміщені на виході, у камері для PIXE. Для збудження атомів цезію, стронцію та кобальту використовувався пучок протонів з енергією Ер≈1400 кеВ.

  • STRUCTURE AND MECHANICAL PROPERTIES OF Ti-Cr-Al-Nb AND Ti-Cr-Al-Nb-V MULTICOMPONENT ALLOYS

    by O.M. Velikodnyi, R.V. Vasilenko, O.S. Kalchenko, I.V. Kolodyi, Y.O. Krainiuk, A.V. Levenets, P.I. Stoev, M.A. Tikhonovsky, G.D. Tolstolutska

    The empirical and semi-empirical models were used to analyze the phase-structural state of five- and fourcomponent alloys of the Ti-Cr-Al-Nb-V system. Two compositions of lightweight alloys were selected for experimental study: Ti60Cr11Al7Nb11V11 and Ti60Cr11Al7Nb22 (at. %). Ingots of these alloys were obtained by argonarc melting method, and they were subjected to homogenization, deformation by rolling and subsequent annealing at different temperatures. The influence of annealing temperature on the phase-structural state of the alloys, their hardness, and mechanical properties during tensile tests has been studied experimentally. It was found that the change of phase composition and grain size during annealing in the temperature range of 700…900 ºC practically does not affect the hardness and tensile strength of alloys. Annealing at 900 ºC transforms the alloys into a singlephase state with bcc lattice and significantly increases the elongation to fracture, which is about 30% for both alloys. In addition, the yield strength and tensile strength of the five-component alloy are noticeably higher than those of the four-component alloy.


  • Open Access

    Modeling the Distribution of Radionuclides in the Air and on the Soil Surface

    by Maryna F. Коzhevnikova, Volodymyr V. Levenets

    Mathematical and numerical methods are used to simulate physical and chemical processes when building models of pollutants dispersion in the air and on the soil surface. Based on meteorological data and information on the source of emissions, these models characterize both the primary pollutants entering the atmosphere directly and the secondary ones formed as the result of complex chemical reactions. These models are important for the air quality management system, as they allow monitoring emissions into the atmosphere, predicting their distribution, as well as developing effective strategies intended for reducing harmful substances in the atmosphere. The article presents an overview of computational methods used to simulate the pollutants dispersion in atmospheric air and on the soil surface, such as the Gaussian torch model, the Lagrangian dispersion stochastic model, and the Eulerian model of atmospheric diffusion. The practical application of the considered models showed sufficient reliability and validity of the air and soil pollution levels forecast. The simulation uses computer programs that include algorithms for solving the mathematical equations that control pollutant dispersion. The dispersion models are used to estimate the concentration of air pollutants or toxins. They can also be used to predict future concentrations under certain scenarios. They are useful for studying the pollutants that disperse over long distances and can initiate reactions in the atmosphere. Such software products are as follows: AEROPOL, AERMOD, GRAL, TAPM CSIRO, CALPUFF, HYSPLIT, etc. A method of processing information about the pollution sources and the environmental parameters, based on the HYSPLIT program, is proposed to form maps of the volume and surface activity of radionuclides. This method was applied to analyze the process of the plutonium isotopes dispersion as a result of the movement of air masses in the places of fires in April 2020 in the exclusion zone of the Chornobyl NPP, as well as the associated hazard for the population health and the environment.


  • MODERNIZATION OF THE ANALYTICAL NUCLEAR-PHYSICAL COMPLEX SOKIL

    by S.G. Karpus, V.V. Kuzmenko, V.V. Levenets, O.Yu. Lonin, A.P. Omelnik, A.O. Shchur, V.I. Sukhostavets


  • Open Access

    Effect of Competing Ions on Multisorption (Cs+, Sr2+) by Composite Sorbents Based on Natural and Synthetic Zeolites

    by Oleksii Yu. Lonin, Volodymyr V. Levenets, Oleksandr P. Omelnyk, Andriy O. Shchur

    In the course of the research, the effect of competing ions (Na+) on multisorption (Cs+, Sr2+) by composite sorbents based on natural and synthetic zeolites under static conditions was studied. It was found that the maximum concentration of competing ions (0.4 g of NaCl per 100 ml of solution) leads to a decrease in cesium sorption by 20%, and strontium sorption decreases by 10%. At the same time, high rates of sorption of cesium and strontium are preserved. Thus, for a composite sorbent (clinoptilolite -30%: zeolite NaX -70%), the sorption of cesium was 67.9%, and the sorption of strontium was 87.6%. The analytical technique was developed on the basis of the PIXE (Proton Induced X-ray Emission) method and made it possible to qualitatively and quantitatively determine the content of isotopes. The work was performed at the analytical nuclear-physical complex "Sokil". The energy range of the electrostatic accelerator is 200-2000 keV. The complex made it possible to carry out all the main methods of analysis using ion beams. The targets were placed in the exit, at the Chamber for PIXE. To carry out measurements, a vacuum with a pressure of 10-4 Pa was created in the chamber. To excite the atoms of cesium, strontium, a proton beam with an energy of Ер≈1400 keV was used. The characteristic X-ray radiation of the L-series of cesium atoms and K-series of strontium atoms was recorded by two detectors: XR-100CR Si-PIN X-Ray and Ge(HP). The sorption coefficient (Sorption, %) was used as a quantitative characteristic of the interaction of sorbents with cesium, strontium.