Bartosz Stańczyk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bartosz Stańczyk has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jan Awrejcewicz
Łódź University of Technology
8 shared publications - Dariusz Grzelczyk
Department of Automation, Biomechanics and Mechatronics, Lodz University of Technology, Lodz, Poland
4 shared publications - Olga Jarzyna
Department of Automation, Biomechanics and Mechatronics, Lodz University of Technology
2 shared publications Adam Wijata
1 shared publication- Adam Wijata
Department of Automation, Biomechanics and Mechatronics, Lodz University of Technology, Lodz, Poland
1 shared publication - Bartłomiej Zagrodny
Department of Automation, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Lodz University of Technology, Stefanowskiego 1/15 Street, 90-924 Lodz, Poland
1 shared publication
Latest Publications
- Open Access
Modeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton
This study is focused on the application of 3D-printed elements and conventional elements to create a prototype of a custom-made exoskeleton for lower limb rehabilitation. The 3D-printed elements were produced by using Fused Deposition Modeling technology and acrylonitrile butadiene styrene (ABS) material. The scope of this work involved the design and construction of an exoskeleton, experimental testing of the ABS material and numerical research by using the finite element method. On the basis of the obtained results, it was possible to deduce whether the load-bearing 3D-printed elements can be used in the proposed mechanical construction. The work contains full data of the material models used in FEM modeling, taking into account the orthotropic properties of the ABS material. Various types of finite elements were used in the presented FE models. The work is a comprehensive combination of material testing issues with the possibility of implementing the obtained results in numerical strength models of machine parts.
Open AccessModeling and Strength Calculations of Parts Made Using 3D Printing Technology and Mounted in a Custom-Made Lower Limb Exoskeleton
This study is focused on the application of 3D-printed elements and conventional elements to create a prototype of a custom-made exoskeleton for lower limb rehabilitation. The 3D-printed elements were produced by using Fused Deposition Modeling technology and acrylonitrile butadiene styrene (ABS) material. The scope of this work involved the design and construction of an exoskeleton, experimental testing of the ABS material and numerical research by using the finite element method. On the basis of the obtained results, it was possible to deduce whether the load-bearing 3D-printed elements can be used in the proposed mechanical construction. The work contains full data of the material models used in FEM modeling, taking into account the orthotropic properties of the ABS material. Various types of finite elements were used in the presented FE models. The work is a comprehensive combination of material testing issues with the possibility of implementing the obtained results in numerical strength models of machine parts.
- 23 January 2024
- Published by Elsevier in Tribology International
- Vol. 192
Empirical mathematical model for describing anisotropic dry friction forces
- 23 January 2024
- Published by Elsevier in Tribology International
- Vol. 192
Empirical mathematical model for describing anisotropic dry friction forces
- 1 January 2022
- Published by Springer Nature
- p. 205-218
Lower Limb Rehabilitation Exoskeleton with a Back Support – Mechanical Design
- 1 January 2022
- Published by Springer Nature
- p. 205-218
Lower Limb Rehabilitation Exoskeleton with a Back Support – Mechanical Design
- 18 December 2020
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 49 (8) , 1188-1208
Generation of a gait pattern for a lower limb rehabilitation exoskeleton
In this article, a simple prototype and control system of a lower limb exoskeleton driven by stepper motors was proposed. To study kinematic parameters of the device, a general, three-dimensional simulation model of the exoskeleton was developed. Moreover, a gait pattern was modeled for hip, knee, and ankle joints. It represents sagittal plane angular positions of joints during normal gait and consists of three piecewise-defined sine-square-based functions. It is based on the experimental gait data recorded with an optoelectronic motion capture system for a healthy subject walking on a treadmill. Although the developed pattern is intended to be implemented in a control system of a lower limb exoskeleton for gait rehabilitation, it can be used to control bipedal robots as well. Last but not least, the control approach was tested with the exoskeleton prototype.
- 18 December 2020
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 49 (8) , 1188-1208
Generation of a gait pattern for a lower limb rehabilitation exoskeleton
In this article, a simple prototype and control system of a lower limb exoskeleton driven by stepper motors was proposed. To study kinematic parameters of the device, a general, three-dimensional simulation model of the exoskeleton was developed. Moreover, a gait pattern was modeled for hip, knee, and ankle joints. It represents sagittal plane angular positions of joints during normal gait and consists of three piecewise-defined sine-square-based functions. It is based on the experimental gait data recorded with an optoelectronic motion capture system for a healthy subject walking on a treadmill. Although the developed pattern is intended to be implemented in a control system of a lower limb exoskeleton for gait rehabilitation, it can be used to control bipedal robots as well. Last but not least, the control approach was tested with the exoskeleton prototype.
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020060
Modelling orthotropic friction with a non-linear bristle model
- 1 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2077, 020060
Modelling orthotropic friction with a non-linear bristle model
- 29 December 2016
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 17 (05)
Kinematics, Dynamics and Power Consumption Analysis of the Hexapod Robot During Walking with Tripod Gait
The paper is focused on the kinematic, dynamic and power consumption analysis of the constructed prototype of the hexapod robot walking with tripod gait on a flat and hard ground. The movements of the robot legs are controlled by different well known oscillators working as central pattern generators (CPGs). The mentioned models, as well as those proposed in our previous paper, are employed and compared from the viewpoint of fluctuations of the robot gravity center both in vertical and movement direction, contact forces between the robot legs and the ground as well as energy demand of the whole robot during walking process. Time histories of the key kinematic and dynamic quantities describing locomotion of the robot are numerically studied and experimentally verified. Power consumption of the whole robot is experimentally investigated based on the current consumption in the applied servo motors which drive the robot legs. We show that the proposed CPG model is more efficient regarding acceleration/deceleration of the whole robot, contact forces and overload acting on the robot legs as well the energy demand during walking of the robot. The appropriate choice of the robot leg movements, depending on the actual situation, can have a positive influence on the investigated issues, i.e. avoid unnecessary acceleration/deceleration of the robot, decrease the contact forces between the legs and the ground and reduce energy demand of the whole robot. Consequently, it also allows to improve structural stability of the robot during walking process.
- 29 December 2016
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 17 (05)
Kinematics, Dynamics and Power Consumption Analysis of the Hexapod Robot During Walking with Tripod Gait
The paper is focused on the kinematic, dynamic and power consumption analysis of the constructed prototype of the hexapod robot walking with tripod gait on a flat and hard ground. The movements of the robot legs are controlled by different well known oscillators working as central pattern generators (CPGs). The mentioned models, as well as those proposed in our previous paper, are employed and compared from the viewpoint of fluctuations of the robot gravity center both in vertical and movement direction, contact forces between the robot legs and the ground as well as energy demand of the whole robot during walking process. Time histories of the key kinematic and dynamic quantities describing locomotion of the robot are numerically studied and experimentally verified. Power consumption of the whole robot is experimentally investigated based on the current consumption in the applied servo motors which drive the robot legs. We show that the proposed CPG model is more efficient regarding acceleration/deceleration of the whole robot, contact forces and overload acting on the robot legs as well the energy demand during walking of the robot. The appropriate choice of the robot leg movements, depending on the actual situation, can have a positive influence on the investigated issues, i.e. avoid unnecessary acceleration/deceleration of the robot, decrease the contact forces between the legs and the ground and reduce energy demand of the whole robot. Consequently, it also allows to improve structural stability of the robot during walking process.
- 1 August 2016
- Published by Elsevier in Mechatronics
- Vol. 37, 63-78
Prototype, control system architecture and controlling of the hexapod legs with nonlinear stick-slip vibrations
- 1 August 2016
- Published by Elsevier in Mechatronics
- Vol. 37, 63-78
Prototype, control system architecture and controlling of the hexapod legs with nonlinear stick-slip vibrations
- 1 January 2015
- Published by Springer Nature
- p. 483-491
Mathematical Modeling and Parameters Identification of the Mechatronical System Used in the Constructed Hexapod Robot
- 1 January 2015
- Published by Springer Nature
- p. 483-491
Mathematical Modeling and Parameters Identification of the Mechatronical System Used in the Constructed Hexapod Robot