Viktor Chikan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Viktor Chikan has a total of 220 co-authors. Here are the top co-authors by number of shared publications:
- Raj Kumar Dani
Department of Chemistry, Kansas State University, 213 CBC Building, Manhattan, Kansas 66506-0401, USA
9 shared publications Adam Borzsonyi
ELI HU Nonprofit Ltd, ELI ALPS, Wolfgang Sandner Utca 3, H-6728 Szeged, Hungary
8 shared publicationsRoland Flender
ELI HU Nonprofit Ltd, ELI ALPS, Wolfgang Sandner Utca 3, H-6728 Szeged, Hungary
7 shared publicationsD. F. Kelley
University of California, Merced, P. O. Box 2039, Merced, California 95344
6 shared publicationsHongwang Wang
6 shared publications- Bin Liu
Tim Taylor Department of Chemical Engineering, Kansas State University, Manhattan, KS 66506, USA
5 shared publications
Latest Publications
- 9 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (3) , 1225-1235
Monitoring Gold Nanoparticle Formation by In Situ Transient Absorption Spectroscopy
- 9 January 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (3) , 1225-1235
Monitoring Gold Nanoparticle Formation by In Situ Transient Absorption Spectroscopy
- Open Access
- 12 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (24) , 25285-25298
CH(A) Radical Formation in Coulomb Explosion from Butane Seeded Plasma Generated with Chirp-Controlled Ultrashort Laser Pulses
We experimentally studied the formation of CH(A) radicals in butane seeded plasma generated with chirp-controlled ultrashort laser pulses (∼760 μJ/pulse, 890 nm, 1 kHz, 8 fs). The focused beam with high peak intensity (∼1014–1016 W/cm2) caused Coulomb explosion (CE). The time-dependent emission spectra were observed with the Fourier-transform Visible spectroscopy (FTVis) step-scan method. The average signal intensity decreased with the chirp in the Ar+ > C2 > H-α ∼ CH(A) order, with a plateau for CH(A) in the −200 to −100 fs2 range. The short rise time of the CH(A) emission signal, the monoexponential emission decay and the nearly constant rotational and vibrational temperatures of the CH(A) radicals (∼3000 and ∼3800 K) all support their potential formation as a primary product (14 W/cm2 intensity. The average charge of CH (+0.6) and its relative abundance (0.5%) support the formation of detectable CH(A) within 120 fs. Suitable optical gating techniques and measurement of the temporal evolution of the electron density in plasma could elucidate the relative importance of the different formation pathways of the CH(A) radicals in the first nanosecond after CE.
- 12 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (24) , 25285-25298
Open AccessCH(A) Radical Formation in Coulomb Explosion from Butane Seeded Plasma Generated with Chirp-Controlled Ultrashort Laser Pulses
We experimentally studied the formation of CH(A) radicals in butane seeded plasma generated with chirp-controlled ultrashort laser pulses (∼760 μJ/pulse, 890 nm, 1 kHz, 8 fs). The focused beam with high peak intensity (∼1014–1016 W/cm2) caused Coulomb explosion (CE). The time-dependent emission spectra were observed with the Fourier-transform Visible spectroscopy (FTVis) step-scan method. The average signal intensity decreased with the chirp in the Ar+ > C2 > H-α ∼ CH(A) order, with a plateau for CH(A) in the −200 to −100 fs2 range. The short rise time of the CH(A) emission signal, the monoexponential emission decay and the nearly constant rotational and vibrational temperatures of the CH(A) radicals (∼3000 and ∼3800 K) all support their potential formation as a primary product (14 W/cm2 intensity. The average charge of CH (+0.6) and its relative abundance (0.5%) support the formation of detectable CH(A) within 120 fs. Suitable optical gating techniques and measurement of the temporal evolution of the electron density in plasma could elucidate the relative importance of the different formation pathways of the CH(A) radicals in the first nanosecond after CE.
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review A
- Vol. 111 (1)
Fragmentation in Coulomb explosion of hydrocarbon molecules
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review A
- Vol. 111 (1)
Fragmentation in Coulomb explosion of hydrocarbon molecules
- 27 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (9) , 3815-3823
Temperature Dependent Carrier Dynamics in Ga-Alloyed CdSe/ZnS Core–Shell Quantum Dots
- 27 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 128 (9) , 3815-3823
Temperature Dependent Carrier Dynamics in Ga-Alloyed CdSe/ZnS Core–Shell Quantum Dots
- Open Access
- 30 September 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (10) , 16668-16676
Exciton Dynamics in MoS2-Pentacene and WSe2-Pentacene Heterojunctions
We measured the exciton dynamics in van der Waals heterojunctions of transition metal dichalcogenides (TMDCs) and organic semiconductors (OSs). TMDCs and OSs are semiconducting materials with rich and highly diverse optical and electronic properties. Their heterostructures, exhibiting van der Waals bonding at their interfaces, can be utilized in the field of optoelectronics and photovoltaics. Two types of heterojunctions, MoS2-pentacene and WSe2-pentacene, were prepared by layer transfer of 20 nm pentacene thin films as well as MoS2 and WSe2 monolayer crystals onto Au surfaces. The samples were studied by means of transient absorption spectroscopy in the reflectance mode. We found that A-exciton decay by hole transfer from MoS2 to pentacene occurs with a characteristic time of 21 ± 3 ps. This is slow compared to previously reported hole transfer times of 6.7 ps in MoS2-pentacene junctions formed by vapor deposition of pentacene molecules onto MoS2 on SiO2. The B-exciton decay in WSe2 shows faster hole transfer rates for WSe2-pentacene heterojunctions, with a characteristic time of 7 ± 1 ps. The A-exciton in WSe2 also decays faster due to the presence of a pentacene overlayer; however, fitting the decay traces did not allow for the unambiguous assignment of the associated decay time. Our work provides important insights into excitonic dynamics in the growing field of TMDC-OS heterojunctions.
- 30 September 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (10) , 16668-16676
Open AccessExciton Dynamics in MoS2-Pentacene and WSe2-Pentacene Heterojunctions
We measured the exciton dynamics in van der Waals heterojunctions of transition metal dichalcogenides (TMDCs) and organic semiconductors (OSs). TMDCs and OSs are semiconducting materials with rich and highly diverse optical and electronic properties. Their heterostructures, exhibiting van der Waals bonding at their interfaces, can be utilized in the field of optoelectronics and photovoltaics. Two types of heterojunctions, MoS2-pentacene and WSe2-pentacene, were prepared by layer transfer of 20 nm pentacene thin films as well as MoS2 and WSe2 monolayer crystals onto Au surfaces. The samples were studied by means of transient absorption spectroscopy in the reflectance mode. We found that A-exciton decay by hole transfer from MoS2 to pentacene occurs with a characteristic time of 21 ± 3 ps. This is slow compared to previously reported hole transfer times of 6.7 ps in MoS2-pentacene junctions formed by vapor deposition of pentacene molecules onto MoS2 on SiO2. The B-exciton decay in WSe2 shows faster hole transfer rates for WSe2-pentacene heterojunctions, with a characteristic time of 7 ± 1 ps. The A-exciton in WSe2 also decays faster due to the presence of a pentacene overlayer; however, fitting the decay traces did not allow for the unambiguous assignment of the associated decay time. Our work provides important insights into excitonic dynamics in the growing field of TMDC-OS heterojunctions.
- 23 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Step Catalysis to Synthesize Fossil-Free Ammonia at Atmospheric Pressure (Final Technical Report)
Affordable fossil-free ammonia synthesis will enable high-yield sustainable crop production for a growing world population while preserving the planet and making the best use of water and land. Simple technology amenable to intermittent operation using renewable energy will be made available through step catalysis activating dinitrogen at atmospheric pressure by nitride formation. Project objectives: 1. At the single particle level, quantify and analyze N2 activation by doped or alloyed manganese macroscopic- and nano particles at atmospheric pressure 2. Quantify and analyze ammonia synthesis from doped or alloyed metal nitride particles when contacting them with hydrogen at atmospheric pressure 3. Integrate experimental data and atomic-level computational models to predict the behavior of metal alloys in nitrogen activation and subsequent ammonia synthesis
- 23 June 2022
- Published by Office of Scientific and Technical Information (OSTI)
Step Catalysis to Synthesize Fossil-Free Ammonia at Atmospheric Pressure (Final Technical Report)
Affordable fossil-free ammonia synthesis will enable high-yield sustainable crop production for a growing world population while preserving the planet and making the best use of water and land. Simple technology amenable to intermittent operation using renewable energy will be made available through step catalysis activating dinitrogen at atmospheric pressure by nitride formation. Project objectives: 1. At the single particle level, quantify and analyze N2 activation by doped or alloyed manganese macroscopic- and nano particles at atmospheric pressure 2. Quantify and analyze ammonia synthesis from doped or alloyed metal nitride particles when contacting them with hydrogen at atmospheric pressure 3. Integrate experimental data and atomic-level computational models to predict the behavior of metal alloys in nitrogen activation and subsequent ammonia synthesis
- Open Access
- 22 February 2022
- Published by IOP Publishing in Journal of Optics
- Vol. 24 (4) , 045502
The role of asymmetry in few-cycle, mid-IR pulses during THz pulse generation
The efficiency of terahertz (THz) pulse generation improves at longer driving wavelengths. For this reason, the use of mid-infrared (MIR) sources is more advantageous compared to visible or near-infrared systems. In this work, we investigate how single-color and two-color schemes of MIR pulses with few-cycle pulse durations compare in producing THz pulses. The results reveal that as the duration of the driving pulses decreases, the second harmonic generation crystal can be omitted from the system. Our numerical study pinpointed three regions where the optimal pulse parameters are fundamentally different for the most efficient THz pulse generation. The first is the two-color approach, where the two-color scheme is dominant at 3.2 optical cycles and over. The second is the single-color approach, where the single-color scheme becomes dominant at 1.7 optical cycles and below. Therefore, it simplifies the traditional two-color scheme for THz pulse generation. There is also a third transitional region where the two-color scheme still prevails, but the sign of the relative phase between the input pulses becomes important. Considering the effect of the relative phase and the carrier to envelope phase (CEP) effect on the THz pulse generation, the results have shown that as the pulse duration become shorter, the role of the CEP becomes important for efficient THz generation. By measuring the efficiency of the THz generation in this optical arrangement, quantifying the CEP becomes possible, which could become an important experimental tool for few-cycle, MIR laser technology.
- 22 February 2022
- Published by IOP Publishing in Journal of Optics
- Vol. 24 (4) , 045502
Open AccessThe role of asymmetry in few-cycle, mid-IR pulses during THz pulse generation
The efficiency of terahertz (THz) pulse generation improves at longer driving wavelengths. For this reason, the use of mid-infrared (MIR) sources is more advantageous compared to visible or near-infrared systems. In this work, we investigate how single-color and two-color schemes of MIR pulses with few-cycle pulse durations compare in producing THz pulses. The results reveal that as the duration of the driving pulses decreases, the second harmonic generation crystal can be omitted from the system. Our numerical study pinpointed three regions where the optimal pulse parameters are fundamentally different for the most efficient THz pulse generation. The first is the two-color approach, where the two-color scheme is dominant at 3.2 optical cycles and over. The second is the single-color approach, where the single-color scheme becomes dominant at 1.7 optical cycles and below. Therefore, it simplifies the traditional two-color scheme for THz pulse generation. There is also a third transitional region where the two-color scheme still prevails, but the sign of the relative phase between the input pulses becomes important. Considering the effect of the relative phase and the carrier to envelope phase (CEP) effect on the THz pulse generation, the results have shown that as the pulse duration become shorter, the role of the CEP becomes important for efficient THz generation. By measuring the efficiency of the THz generation in this optical arrangement, quantifying the CEP becomes possible, which could become an important experimental tool for few-cycle, MIR laser technology.
- Open Access
- 4 August 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (17) , 5616-5621
Facile one-pot synthesis of γ-Fe 2 O 3 nanoparticles by inductive heating
The direct one-pot synthesis of γ-Fe 2 O 3 nanoparticles (NPs) has been demonstrated through a facile inductive heating method.
- 4 August 2021
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 2 (17) , 5616-5621
Open AccessFacile one-pot synthesis of γ-Fe 2 O 3 nanoparticles by inductive heating
The direct one-pot synthesis of γ-Fe 2 O 3 nanoparticles (NPs) has been demonstrated through a facile inductive heating method.
- 9 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (28) , 6535-6542
Activation of N2 on Manganese Nitride-Supported Ni3 and Fe3 Clusters and Relevance to Ammonia Formation
Dual-site models were constructed to represent manganese nitride (Mn4N)-supported Ni3 and Fe3 clusters for NH3 synthesis. Density functional theory calculations produced an energy barrier of approximately 0.55 eV for N–N bond activation at the interfacial nitrogen vacancy sites (Nv); also, the hydrogenation and removal of interfacial N is promoted by earth-abundant Ni and Fe metals. Steady-state microkinetic modeling revealed that the turnover frequencies of NH3 production follow an order of Fe3@Mn4N ≈ Ni3@Mn4N > Mn4N > Fe ≫ Ni. Moreover, we present clear evidence that, before NH3 formation, NH migrates from Nv onto the metallic sites. Using N binding energy (BEN) and the transition-state energy of N2 activation (ETS) as descriptors, we concluded that the beneficial effects owing to interfacial Nv sites are the most pronounced when BEN is either too strong or too weak while ETS is high; otherwise, excessive Nv sites may hinder catalyst performance.
- 9 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (28) , 6535-6542
Activation of N2 on Manganese Nitride-Supported Ni3 and Fe3 Clusters and Relevance to Ammonia Formation
Dual-site models were constructed to represent manganese nitride (Mn4N)-supported Ni3 and Fe3 clusters for NH3 synthesis. Density functional theory calculations produced an energy barrier of approximately 0.55 eV for N–N bond activation at the interfacial nitrogen vacancy sites (Nv); also, the hydrogenation and removal of interfacial N is promoted by earth-abundant Ni and Fe metals. Steady-state microkinetic modeling revealed that the turnover frequencies of NH3 production follow an order of Fe3@Mn4N ≈ Ni3@Mn4N > Mn4N > Fe ≫ Ni. Moreover, we present clear evidence that, before NH3 formation, NH migrates from Nv onto the metallic sites. Using N binding energy (BEN) and the transition-state energy of N2 activation (ETS) as descriptors, we concluded that the beneficial effects owing to interfacial Nv sites are the most pronounced when BEN is either too strong or too weak while ETS is high; otherwise, excessive Nv sites may hinder catalyst performance.
- 4 January 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (2) , 306
Phase-controlled, second-harmonic-optimized terahertz pulse generation in nitrogen by infrared two-color laser pulses: erratum
This erratum corrects citations of references in J. Opt. Soc. Am. B 37, 1838 (2020)JOBPDE 0740-3224 10.1364/JOSAB.391123 .
- 4 January 2021
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 38 (2) , 306
Phase-controlled, second-harmonic-optimized terahertz pulse generation in nitrogen by infrared two-color laser pulses: erratum
This erratum corrects citations of references in J. Opt. Soc. Am. B 37, 1838 (2020)JOBPDE 0740-3224 10.1364/JOSAB.391123 .