KWKrishna Gopakumar Warrier

Krishna Gopakumar Warrier

*This is an algorithmically generated author record based on publicly available information.

Krishna Gopakumar Warrier has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • A. Peer Mohamed

    National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR)

    3 shared publications
  • Balagopal N. Nair

    R&D Centre, Noritake Co. Ltd., Aichi, Japan

    3 shared publications
  • Unnikrishnan Nair Saraswathy Hareesh

    Materials Science and Technology Division

    3 shared publications
  • Venu Sreekala Smitha

    Materials Science and Technology Division

    3 shared publications
  • K. A. Manjumol

    National Institute for Interdisciplinary Science and Technology (NIIST), Council of Scientific and Industrial Research (CSIR)

    2 shared publications
  • Saju Pillai

    Materials Science and Technology Division, CSIR-National Institute for Interdisciplinary Science and Technology (NIIST), Thiruvananthapuram, India

    2 shared publications

Latest Publications

  • Optical Properties of Rare‐Earth Doped TiO 2 Nanocomposites and Coatings; A Sol‐Gel Strategy towards Multi–functionality

    by V. S. Smitha, Pillai Saju, U. S. Hareesh, Ghosh Swapankumar, K. G. K. Warrier

    A novel facile sol‐gel method was used to synthesize visible‐light responsive and photoluminescent rare‐earth modified titania nanocomposites and coatings. Titania‐silica‐lanthanum phosphate nanocomposite doped with terbium ions (Tb 3+ ) was prepared by an aqueous sol‐gel process and the films fabricated on glass substrates by dip coating are investigated in the present work. Followed by heat treatment at 400 degree Celsius, Tb doped nanocomposite exhibits green luminescence under visible light excitation (484 nm) and PL spectra show intense peaks at 545 nm ( 5 D 4 ‐ 7 F 5 ), characteristic of Tb 3+ ion with a life time of ∼0.34 ms. The band gap energy of the nanocomposite was red shifted with Tb doping indicating its visible light response. 0.5 mol% Tb doped nanocomposite coated glass shows ∼66 % methylene blue dye degradation under visible light exposure for two hours while pure titania coating showed the visible light activity of ∼25 % only. 0.5 mol% Tb doped nanocomposite is thus proposed for the development of visible light active, transparent and luminescent coatings on glass substrates. Moreover, the feasibility of a codoping approach (0.25 mol% Tb and 0.25 mol% Eu doped nanocomposite) for getting multiple emission (red and green) by a single excitation wavelength (484 nm) is also demonstrated. A higher decay time of ∼0.48 ms obtained for codoped system shows the possibility of an aqueous sol‐gel approach useful for applications in the area of multi‐color light emissive displays.


  • Open Access

    Hydrophobic and Metallophobic Surfaces: Highly Stable Non-wetting Inorganic Surfaces Based on Lanthanum Phosphate Nanorods

    by Sasidharan Sankar, Balagopal N. Nair, Takehiro Suzuki, Gopinathan M. Anilkumar, Moothetty Padmanabhan, Unnikrishnan Nair S. Hareesh, Krishna G. Warrier

    Metal oxides, in general, are known to exhibit significant wettability towards water molecules because of the high feasibility of synergetic hydrogen-bonding interactions possible at the solid-water interface. Here we show that the nano sized phosphates of rare earth materials (Rare Earth Phosphates, REPs), LaPO4 in particular, exhibit without any chemical modification, unique combination of intrinsic properties including remarkable hydrophobicity that could be retained even after exposure to extreme temperatures and harsh hydrothermal conditions. Transparent nanocoatings of LaPO4 as well as mixture of other REPs on glass surfaces are shown to display notable hydrophobicity with water contact angle (WCA) value of 120° while sintered and polished monoliths manifested WCA greater than 105°. Significantly, these materials in the form of coatings and monoliths also exhibit complete non-wettability and inertness towards molten metals like Ag, Zn, and Al well above their melting points. These properties, coupled with their excellent chemical and thermal stability, ease of processing, machinability and their versatile photo-physical and emission properties, render LaPO4 and other REP ceramics utility in diverse applications.


  • Photoluminescent, self-cleaning titanium oxide nanocomposites with multifunctional properties

    by Venu Sreekala Smitha, Saju Pillai, Unnikrishnan Nair Saraswathy Hareesh, Balagopal N. Nair, Krishna Gopakumar Warrier

    Novel multifunctional luminescent and self-cleaning nanocomposites and coatings of Eu doped TiO2–SiO2–LaPO4 (Eu-TSL) were synthesized from an aqueous sol–gel process which possess photoactivity, low wettability and photoluminescent properties.


  • A novel synthesis route for brookite rich titanium dioxide photocatalyst involving organic intermediate

    by K. A. Manjumol, M. Jayasankar, K. Vidya, A. Peer Mohamed, Balagopal N. Nair, K. G. K. Warrier


  • Temperature assisted acid catalyzed peptization of TiO2; facile sol–gel approach for thermally stable anatase phase

    by Vidya Kattoor, Venu Sreekala Smitha, A. Peer Mohamed, Unnikrishnan Nair Saraswathy Hareesh, Krishna Gopakumar Warrier

    High temperature stable, phase pure anatase has been successfully synthesized by temperature assisted acid catalyzed peptization of hydrous titania through an aqueous sol–gel method. This facile method does not contain any metal or non metal dopants and is very effective in extending the anatase to rutile phase transformation by 200 °C. The temperature maintained during the peptization process has a significant effect on the particle size and morphology of titanium dioxide. The sol synthesized by peptization at 60 °C has the lowest particle size of 65.2 nm and after calcination at 800 °C, has a crystallite size of ∼53 nm. The relatively higher particle size of other samples is attributed to the aggregation of particles at respective peptization temperatures. An optimum temperature of 60 °C is effective in minimising the aggregation behaviour of titania sol which further increases the photocatalytic activity. Titanium dioxide peptized at 60 °C has higher photocatalytic activity (∼86%) than the one peptized at 30 °C (∼74%) under UV-A exposure for 100 minutes with apparent rate constants 0.02 and 0.01 min−1 respectively. An increased anatase to rutile transformation temperature of 800 °C will be very useful in increasing the annealing especially in ceramic substrates. Thus highly photoactive nanocrystalline titania containing thermally stable anatase that can be used for high temperature photocatalytic applications has been synthesized.


  • UV curable hydrophobic inorganic–organic hybrid coating on solar cell covers for photocatalytic self cleaning application

    by Venu Sreekala Smitha, Kanakkanmavudy B. Jaimy, Palantavida Shajesh, Jose K. Jeena, Krishna Gopakumar Warrier

    A process for obtaining a low temperature, UV curable inorganic–organic hybrid coating having excellent photoactive properties which is suitable for glass surfaces such as solar cell covers, automobile rear view mirrors and several electronic devices is presented. Nano titania sol having an average particle size of 19 nm has been synthesized using the aqueous sol–gel route starting from titanyl sulphate and was made highly photoactive by crystallizing through a simple microwave treatment which is of considerable importance in the synthesis of hybrid coatings where conventional heat treatment is not possible. The photoactive titania particles were then partially covered by silica particles by optimizing the amount of the silane moiety. A multifunctional monomer composition was further prepared and coated on a solar cell cover glass followed by a second layer coating using photoactive titania particles by dip coating and was cured under UV for six hours. The coated substrate shows photocatalytic efficiency as well as transparency >90% and further, a water contact angle >90°. Titania particles were uniformly distributed on the surface of the top coating as revealed by AFM and the coating had a total thickness of approximately 2.5 μm. The appropriate ratio of organic silanes/acrylates imparts strong adhesion to the substrate, while the inorganic components composed of a hybrid mixture of silica/titania enhanced the self cleaning efficiency. Such multifunctional coatings on solar cell covers have considerable advantage in preventing surface contamination from the exposed atmosphere which decreases the efficiency of such panels in the 15–25% range.


  • Effect of precursor particle size distribution on the morphology and low wetting behavior of photocatalytic nanocoatings on glass surfaces

    by Venu Sreekala Smitha, Petit Francois, Unnikrishnan Nair Saraswathy Hareesh, Krishna Gopakumar Warrier

    The effect of particle size distribution of coating precursor on the morphology and low wetting character of photocatalytic nanocoatings is investigated in the present work. TiO2–SiO2–Al2O3 nanocomposite coatings containing Al2O3 particles of size in the range 20–200 nm have been prepared on glass substrates by an aqueous sol–gel process. A composite sol of titanium dioxide containing 30 mol% silica comprises the matrix sol to which alumina particles (1–10 mol%) having sizes in the range 20 to 200 nm are introduced as stabilized dispersions and further coated on glass substrates by the dip-coating method followed by annealing of the coatings at 400 °C. A composite coating containing 2 mol% boehmite derived alumina (TS-B-2) has been found to be more photoactive under visible light and was low wetting in nature. The higher photocatalytic activity of the TS-B-2 nanocomposite is attributed to the presence of phase pure anatase with crystallite size of 3.7 nm and high surface area of 315 m2 g−1, while the low wetting character is attributed to the hierarchical morphology resulting in uniform surface roughness. The present study significantly highlights the possibility of designing composite precursors containing desired constituent particle sizes to produce nanocoatings differing in grain sizes, surface roughness and morphology, resulting in increased self-cleaning and low wetting properties.


  • A hybrid sol–gel approach for novel photoactive and hydrophobic titania coatings on aluminium metal surfaces

    by K. A. Manjumol, L. Mini, A. Peer Mohamed, U. S. Hareesh, K. G. K. Warrier

    Photoactive and hydrophobic titanium dioxide–silica coatings on aluminium metal surfaces have been developed by dip-coating of a mixed sol–gel precursor of titanium isopropoxide (TIP) and methyl trimethoxysilane (MTMS). The coating composition of titania–0.5 wt% silica (T–S0.5), annealed at 400 °C in air, effectively degraded 94% and 86% methylene blue after 3 h irradiation under UV and sunlight respectively. A water contact angle of 137° was measured on coated surfaces.


  • Novel multifunctional titania–silica–lanthanum phosphate nanocomposite coatings through an all aqueous sol–gel process

    by Venu Sreekala Smitha, Chembolli Kunhatta Jyothi, Peer Mohamed A, Saju Pillai, Krishna Gopakumar Warrier

    A novel nanocomposite coating containing titania, silica and lanthanum phosphate prepared through an all aqueous sol–gel route exhibits excellent self-cleaning ability arising from the synergistic effect of the constituents in the nanocomposite. A highly stable titania–silica–lanthanum phosphate nanocomposite sol having particle size in the range of 30–50 nm has been synthesized starting from a titanyl sulphate precursor, which was further used for the development of photocatalytically active composite coatings on glass. The coatings prepared by the dip coating technique as well as the nanocomposite powders are heat treated and characterized further for their morphology and multifunctionality. The nanocomposite containing 1.5 wt% LaPO4 has shown a surface area as high as 138 m2 g−1 and a methylene blue degradation efficiency of 94% in two hours of UV exposure. The composite coating has shown very good homogeneity evidenced by transparency as high as 99.5% and low wetting behaviour. The present novel approach for energy conserving, aqueous derived, self-cleaning coatings may be suitable for large scale industrial applications.