Igor Albertovich Brigadnov
Igor Albertovich Brigadnov has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Vyacheslav V. Maksarov
Komsomolsk-on-Amur State University
2 shared publications- Aleksandr Lutonin
Department of Informatics and Computer Technology, St. Petersburg Mining University, St. Petersburg 199106, Russia
1 shared publication - Aleksandr O. Minin
Saint Petersburg Mining University
1 shared publication Dmitrii A. Klochkov
Komsomolsk-on-Amur State University
1 shared publicationEkaterina M. Fedotova
Department of Computer Science National Mineral Resources University "Gorniy", St. Petersburg Russian Federation
1 shared publication- Holm Altenbach
Otto-von-Guericke-Universität Magdeburg
1 shared publication
Latest Publications
- 29 August 2024
- Published by Springer Nature in Acta Mechanica
- Vol. 235 (11) , 6723-6738
Evolutionary-variational method in mathematical plasticity
- 29 August 2024
- Published by Springer Nature in Acta Mechanica
- Vol. 235 (11) , 6723-6738
Evolutionary-variational method in mathematical plasticity
- 21 April 2023
- Published by Allerton Press in Mechanics of Solids
- Vol. 58 (2) , 404-414
Optimal Acceleration or Braking of Massive Flywheels at the Strength Limit
The article poses and solves the problem on time-optimal control of the quasi-static acceleration or deceleration of a massive flywheel by taking into acco
- 21 April 2023
- Published by Allerton Press in Mechanics of Solids
- Vol. 58 (2) , 404-414
Optimal Acceleration or Braking of Massive Flywheels at the Strength Limit
The article poses and solves the problem on time-optimal control of the quasi-static acceleration or deceleration of a massive flywheel by taking into acco
- 1 March 2023
- Published by Pleiades Publishing Ltd in Vestnik St. Petersburg University, Mathematics
- Vol. 56 (1) , 68-76
Discontinuous Mappings and the Limit Load in Boundary Value Problems of Nonlinear Elasticity
The paper considers a boundary-value problem of nonlinear elasticity for a mapping (deformation) in two weak formulations: in the form of a variational equilibrium equation and in the form of minimization of a multidimensional integral energy functional. From a mathematical point of view, both formulations refer to problems of functional analysis, in terms of which their mathematical correctness is discussed. Using the methods of variational calculus, with the example of two simple problems, it is proved that, for some nonlinear elastic models, in the corresponding boundary-value problems, there can be mappings with slip-type discontinuities and there can be a limit load, i.e., a value of external forces above which the boundary-value problem has no solution. Among such models there are elastic potentials with linear growth with respect to the mapping’s gradient, e.g., the well-known statistical Bartenev–Khazanovich model and the phenomenological Treloar model. The relation between these effects is discussed. It is also noted that the results obtained should be taken into account in the practical use of linear-growth elastic potentials. With the example of the problem of the axisymmetric torsion or tension of a circular cylinder, lower estimates for the limit load are constructed analytically using the methods of variational calculus and optimization theory. An analysis of the relations obtained shows that a polynomial growth of order p is characterized by polynomial hardening of order p – 1. With a linear increase in the specific strain energy with the strain gradient, a saturation effect is observed, which corresponds to the limit load. This behavior is typical of boundary-value problems of deformation plasticity, where a limit load at zero hardening also exists, i.e., of ideal elastoplasticity.
- 1 March 2023
- Published by Pleiades Publishing Ltd in Vestnik St. Petersburg University, Mathematics
- Vol. 56 (1) , 68-76
Discontinuous Mappings and the Limit Load in Boundary Value Problems of Nonlinear Elasticity
The paper considers a boundary-value problem of nonlinear elasticity for a mapping (deformation) in two weak formulations: in the form of a variational equilibrium equation and in the form of minimization of a multidimensional integral energy functional. From a mathematical point of view, both formulations refer to problems of functional analysis, in terms of which their mathematical correctness is discussed. Using the methods of variational calculus, with the example of two simple problems, it is proved that, for some nonlinear elastic models, in the corresponding boundary-value problems, there can be mappings with slip-type discontinuities and there can be a limit load, i.e., a value of external forces above which the boundary-value problem has no solution. Among such models there are elastic potentials with linear growth with respect to the mapping’s gradient, e.g., the well-known statistical Bartenev–Khazanovich model and the phenomenological Treloar model. The relation between these effects is discussed. It is also noted that the results obtained should be taken into account in the practical use of linear-growth elastic potentials. With the example of the problem of the axisymmetric torsion or tension of a circular cylinder, lower estimates for the limit load are constructed analytically using the methods of variational calculus and optimization theory. An analysis of the relations obtained shows that a polynomial growth of order p is characterized by polynomial hardening of order p – 1. With a linear increase in the specific strain energy with the strain gradient, a saturation effect is observed, which corresponds to the limit load. This behavior is typical of boundary-value problems of deformation plasticity, where a limit load at zero hardening also exists, i.e., of ideal elastoplasticity.
- Open Access
Error State Extended Kalman Filter Localization for Underground Mining Environments
The article addresses the issue of mobile robotic platform positioning in GNSS-denied environments in real-time. The proposed system relies on fusing data from an Inertial Measurement Unit (IMU), magnetometer, and encoders. To get symmetrical error gauss distribution for the measurement model and achieve better performance, the Error-state Extended Kalman Filter (ES EKF) is chosen. There are two stages of vector state determination: vector state propagation based on accelerometer and gyroscope data and correction by measurements from additional sensors. The error state vector is composed of the velocities along the x and y axes generated by combining encoder data and the orientation of the magnetometer around the axis z. The orientation angle is obtained from the magnetometer directly. The key feature of the algorithm is the IMU measurements’ isolation from additional sensor data, with its further summation in the correction step. Validation is performed by a simulation in the ROS (Robot Operating System) and the Gazebo environment on the grounds of the developed mathematical model. Trajectories for the ES EKF, Extended Kalman Filter (EKF), and Unscented Kalman Filter (UKF) algorithms are obtained. Absolute position errors for all trajectories are calculated with an EVO package. It is shown that using the simplified version of IMU’s error equations allows for the achievement of comparable position errors for the proposed algorithm, EKF and UKF.
Open AccessError State Extended Kalman Filter Localization for Underground Mining Environments
The article addresses the issue of mobile robotic platform positioning in GNSS-denied environments in real-time. The proposed system relies on fusing data from an Inertial Measurement Unit (IMU), magnetometer, and encoders. To get symmetrical error gauss distribution for the measurement model and achieve better performance, the Error-state Extended Kalman Filter (ES EKF) is chosen. There are two stages of vector state determination: vector state propagation based on accelerometer and gyroscope data and correction by measurements from additional sensors. The error state vector is composed of the velocities along the x and y axes generated by combining encoder data and the orientation of the magnetometer around the axis z. The orientation angle is obtained from the magnetometer directly. The key feature of the algorithm is the IMU measurements’ isolation from additional sensor data, with its further summation in the correction step. Validation is performed by a simulation in the ROS (Robot Operating System) and the Gazebo environment on the grounds of the developed mathematical model. Trajectories for the ES EKF, Extended Kalman Filter (EKF), and Unscented Kalman Filter (UKF) algorithms are obtained. Absolute position errors for all trajectories are calculated with an EVO package. It is shown that using the simplified version of IMU’s error equations allows for the achievement of comparable position errors for the proposed algorithm, EKF and UKF.
- Open Access
- 1 January 2023
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Mathematics. Mechanics. Astronomy
- Vol. 10 (1) , 86-98
Discontinuous mappings and the limit load in boundary value problems of nonlinear elasticity
The article discusses a boundary value problem of nonlinear elasticity for mapping (deformation) in two weak formulations: in the form of a variational equilibrium equation and in the form of minimization of a multidimensional integral functional. Some questions of a mathematical correctness of the nonlinear elasticity BVP are discussed. Using methods of calculus of variations, by the example of two simple problems, it is proved that for some nonlinear elastic models in the corresponding boundary value problems there can be mappings that have discontinuities of the slip type, as well as there is the limit load - such a finite value of external forces, above which the boundary value problem has no solution at all.
- 1 January 2023
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Mathematics. Mechanics. Astronomy
- Vol. 10 (1) , 86-98
Open AccessDiscontinuous mappings and the limit load in boundary value problems of nonlinear elasticity
The article discusses a boundary value problem of nonlinear elasticity for mapping (deformation) in two weak formulations: in the form of a variational equilibrium equation and in the form of minimization of a multidimensional integral functional. Some questions of a mathematical correctness of the nonlinear elasticity BVP are discussed. Using methods of calculus of variations, by the example of two simple problems, it is proved that for some nonlinear elastic models in the corresponding boundary value problems there can be mappings that have discontinuities of the slip type, as well as there is the limit load - such a finite value of external forces, above which the boundary value problem has no solution at all.
- 9 December 2022
- Published by Springer Nature in Acta Mechanica
- Vol. 234 (3) , 1293-1303
Numerical method for solving of ill-conditioned boundary value problems in nonlinear elasticity
- 9 December 2022
- Published by Springer Nature in Acta Mechanica
- Vol. 234 (3) , 1293-1303
Numerical method for solving of ill-conditioned boundary value problems in nonlinear elasticity
- 1 January 2021
- Published by Publishing House "Polytechnica" in Metalloobrabotka
- No. 4,p. 26-33
Prospects of using magnetic-abrasive finishing to ensure the quality of the surface layer of the synchronizer cone
Представлен анализ перспектив применения магнитно-абразивной обработки поверхностного слоя конуса инерционного синхронизатора для обеспечения его качественных характеристик. Рассмотрены методы финишной обработки и проведено сравнение с технологией окончательной обработки конуса синхронизатора. Сделаны выводы и рекомендации по применению магнитно-абразивной обработки в качестве финишной...
- 1 January 2021
- Published by Publishing House "Polytechnica" in Metalloobrabotka
- No. 4,p. 26-33
Prospects of using magnetic-abrasive finishing to ensure the quality of the surface layer of the synchronizer cone
Представлен анализ перспектив применения магнитно-абразивной обработки поверхностного слоя конуса инерционного синхронизатора для обеспечения его качественных характеристик. Рассмотрены методы финишной обработки и проведено сравнение с технологией окончательной обработки конуса синхронизатора. Сделаны выводы и рекомендации по применению магнитно-абразивной обработки в качестве финишной...
- 1 January 2021
- Published by Publishing House "Polytechnica" in Metalloobrabotka
- No. 3,p. 13-21
The use of ultrasonic vibrations in the machining of difficult-to-machining materials
Рассмотрены методы механической обработки труднообрабатываемых материалов с применением ультразвуковых колебаний, способствующих обеспечению качества изготовления изделий, а также проблемы, возникающие в процессе обработки таких материалов.
- 1 January 2021
- Published by Publishing House "Polytechnica" in Metalloobrabotka
- No. 3,p. 13-21
The use of ultrasonic vibrations in the machining of difficult-to-machining materials
Рассмотрены методы механической обработки труднообрабатываемых материалов с применением ультразвуковых колебаний, способствующих обеспечению качества изготовления изделий, а также проблемы, возникающие в процессе обработки таких материалов.
- 10 January 2020
- Published by Springer Nature in Journal of Elasticity
- Vol. 140 (1) , 121-133
Multi-criteria Estimation of Load-Bearing Capacity of Solids
- 10 January 2020
- Published by Springer Nature in Journal of Elasticity
- Vol. 140 (1) , 121-133
Multi-criteria Estimation of Load-Bearing Capacity of Solids
- Open Access
- 28 August 2018
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. 232 (4) , 368
DIRECT METHODS FOR SOLVING THE VARIATION PROBLEM FOR MULTICRITERIA ESTIMATION OF THE BEARING CAPACITY OF GEOMATERIALS
ПРЯМЫЕ МЕТОДЫ РЕШЕНИЯ ВАРИАЦИОННОЙ ЗАДАЧИ ДЛЯ МНОГОКРИТЕРИАЛЬНОЙ ОЦЕНКИ НЕСУЩЕЙ СПОСОБНОСТИ ГЕОМАТЕРИАЛОВ
- 28 August 2018
- Published by Saint-Petersburg Mining University in Journal of Mining Institute
- Vol. 232 (4) , 368
Open AccessDIRECT METHODS FOR SOLVING THE VARIATION PROBLEM FOR MULTICRITERIA ESTIMATION OF THE BEARING CAPACITY OF GEOMATERIALS
ПРЯМЫЕ МЕТОДЫ РЕШЕНИЯ ВАРИАЦИОННОЙ ЗАДАЧИ ДЛЯ МНОГОКРИТЕРИАЛЬНОЙ ОЦЕНКИ НЕСУЩЕЙ СПОСОБНОСТИ ГЕОМАТЕРИАЛОВ