BEBugra Ertas

Bugra Ertas

*This is an algorithmically generated author record based on publicly available information.

Bugra Ertas has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Identification of Dynamic Force Coefficients for an Additively Manufactured Hermetic Squeeze Film Bearing Support Damper Utilizing a Pass-Through Channel

    by Bugra Ertas, Keith Gary, Thomas Adcock

    The following paper presents breakthrough experimental results for a new hermetic squeeze film damper (HSFD) concept that is integrally designed within an externally pressurized tilting-pad radial gas bearing support. The flexibly damped gas bearing module was designed for a 7.2″ (183 mm) diameter shaft and fabricated using direct metal laser melting (DMLM); also known as additive manufacturing. The bearing and HSFD were sized based on ongoing studies for oil-free supercritical carbon dioxide (sCO2) power turbines in the 8.5 MW–10 MW power range. The development of the new damper concept was motivated by past dynamic testing on HSFD, which generated frequency-dependent stiffness and damping force coefficients. In efforts to eliminate the frequency dependency, a new HSFD architecture was conceived that adds accumulator volumes and a pass-through channel to previously conceived HSFD flow network designs. The other motivation for the work is the need to develop a cost-effective and reliable oil-free bearing technology that is scalable to large power turbomachinery applications. There were several objectives for the following work. The first objective was to successfully design and fabricate a single piece bearing-damper using additive manufacturing, while dimensionally controlling critical design features. The paper discusses the manufacturing steps and shows cut-ups that reveal adequate clearance control capability with internal damper clearances. The second objective was to perform experimental testing with the new HSFD design in efforts to extract stiffness and damping coefficients for excitation frequencies within 20–160 Hz and peak vibration amplitudes between 0.25 mils (6.35 microns) to 1 mil (25.4 microns). The test results for a single HSFD bearing module indicated that the design modifications to the HSFD architecture were successful in eliminating nearly all the frequency dependencies for the stiffness force coefficient. The dynamic tests yielded a stiffness coefficient that varied between 112 klb/in. (19.6 MN/m) and 96 klb/in. (16.8 MN/m). The damping force coefficient however, exhibited relatively more variation with frequency with values residing between 175 lb-s/in. (31 kN-s/m) to 214 lb-s/in. (37 kN-s/m). Finally, the paper advances a three-dimensional fluid-structure interaction (FSI) model using transient finite element analysis (FEA) coupled to a computational fluid dynamics (CFD) model. The FSI analysis performed between 20 Hz and 80 Hz was used to predict the stiffness and damping of the HSFD using a quarter-section model of the damper. The FSI analysis was able to support test results by showing only a 6–7.4% change in the magnitude of force coefficients. Stiffness predictions agree reasonably well with experiments whereas damping is underpredicted.


  • Open Access

    A General-Purpose Test Facility for Evaluating Gas Lubricated Thrust Bearings

    by Keith Gary, Bugra Ertas, Adolfo Delgado

    The design, construction, operational capabilities, and proof of concept results are presented for a test rig used to evaluate gas-lubricated thrust bearings. The following work is motivated by a desire to utilize the working fluid of high performance turbomachinery such as gas turbines for bearing lubricant. Auxiliary equipment required to cool, pump, and clean oil for a typical

  • Open Access

    Additively Manufactured Compliant Hybrid Gas Thrust Bearing for sCO2 Turbomachinery: Design and Proof of Concept Testing

    by Bugra Ertas

    The following paper advances a new type of gas lubricated thrust bearing that utilizes additive manufacturing or also known as direct metal laser melting (DMLM) to fabricate the bearing. The motivation for the new bearing concept is drawn from the need for highly-efficient supercritical carbon dioxide (sCO~2~) turbomachinery enabled through the elimination of conventional

  • Open Access

    Additively Manufactured Compliant Hybrid Gas Thrust Bearing for sCO2 Turbomachinery: Experimental Evaluation and Fluid-Structure Model Predictions

    by Bugra Ertas, Keith Gary, Adolfo Delgado

    The following paper presents experimental results from rotating tests in air to 10KRPM on a new type of gas lubricated thrust bearing utilizing additive manufacturing or also known as direct metal laser melting (DMLM). The new bearing concept aims to help eliminate oil-systems in high-powered supercritical carbon dioxide (sCO~2~) turbomachinery through implementing novel complex

  • Open Access

    Additively Manufactured Compliant Hybrid Gas Thrust Bearing for Supercritical Carbon Dioxide Turbomachinery: Design and Proof of Concept Testing

    by Bugra Ertas

    The following paper presents a new type of gas lubricated thrust bearing that utilizes additive manufacturing or also known as direct metal laser melting (DMLM) to fabricate the bearing. The motivation for the new bearing concept is derived from the need for highly efficient supercritical carbon dioxide (sCO2) turbomachinery in the mega-watt power range. The paper provides a review of existing gas thrust-bearing technology, outlines the need for the new DMLM concept, and discusses proof-of-concept testing results. The new concept combines hydrostatic pressurization with individual tilting pads that are flexibly mounted using hermetic squeeze film dampers (HSFD) in the bearing-pad support. This paper describes the thrust-bearing concept and discusses the final design approach. Proof-of-concept testing in air for a 6.8 in. (173 mm) outer diameter thrust gas bearing was performed; with thrust loading, up to 1500 lbs (6.67 kN) and a thrust runner speed of 10krpm (91 m/s tip speed). The experiments were performed with a bent shaft resulting in thrust runner axial vibration magnitudes of 2.9 mils (74 μm) p-p and dynamic thrust loads of 270 lbs (1.2 kN) p-p. In addition, force deflection characteristics and stiffness coefficients of the bearing system are presented for an inlet hydrostatic pressure of 380 psi (2.62 MPa). Results at 10 krpm show that the pad support architecture was able to sustain high levels of dynamic misalignment equaling 6 times the nominal film clearance while demonstrating a unit load-carrying capacity of 55 psi (0.34 Mpa). Gas-film force deflection tests portrayed nonlinear behavior like a hardening spring, while the bearing pad support stiffness was measured to be linear and independent of gas film thickness.


  • Experimental Rotordynamic Force Coefficients for a Diffusion Bonded Compliant Hybrid Journal Gas Bearing Utilizing Fluid-Filled Hermetic Dampers

    by Keith Gary, Bugra Ertas

    Dynamic force coefficients are presented from experimental results of a radial gas bearing with hermetically sealed squeeze film dampers (HSFDs) in the bearing support. HSFDs are a relatively new technology aimed to increase damping levels in gas bearings while sustaining an oil-free bearing sump. Past HSFD designs proved bulky and contained many components making it difficult to employ in size-limited environments such as jet engines, while the diffusion bonded bearing discussed in this paper provides a compact integral design. Details of the design are found in a companion paper by Ertas (Ertas, B. H., 2019, “Compliant Hybrid Gas Bearing Using Integral Hermetically-Sealed Squeeze Film Dampers,” ASME Paper No. GT2018-76312). Test results for a 3 in. (76.2 mm) diameter bearing using a test rig providing static loads up to 80 lbs (356 N), controlled-dynamic orbital motion, and speeds up to 27 krpm are shown. Results include frequency- and speed-dependent direct and cross-coupled rotordynamic force coefficients. Dynamic testing showed little dependence on rotor speed or static load and exhibited frequency dependency at lower excitation frequencies. Cross-coupled terms are generally an order of magnitude lower than direct terms. Results show the direct stiffness coefficients increasing with frequency, while direct damping decays radically with frequency. Comparison of the overall gas bearing coefficients with the companion paper (Ertas, B. H., 2019, “Compliant Hybrid Gas Bearing Using Integral Hermetically-Sealed Squeeze Film Dampers,” ASME Paper No. GT2018-76312), showing bearing support coefficients, reveals a drastic reduction in damping when engaging the gas film. The results also indicate that the bearing can withstand vibration levels representative of a large rotor system critical speed at lower excitation frequencies.


  • Compliant Hybrid Gas Bearing Using Integral Hermetically Sealed Squeeze Film Dampers

    by Bugra Ertas

    This paper focuses on an integral gas-film lubricated bearing concept developed to enable the oil-free operation of super-critical carbon dioxide (sCO2) turbomachinery. The externally pressurized tilting pad bearing concept possesses a flexible bearing support with an integral hermetically sealed squeeze film damper. Unlike the past concepts using modular hermetic squeeze film dampers presented, the bearing design in this work utilizes advanced manufacturing methods to yield an integral single piece design in efforts to reduce space envelope, cost, and improve overall design reliability. The paper advances a detailed description of the bearing design and identification of bearing support force coefficients. Nonrotating benchtop tests show the influence of vibration amplitude, frequency, and damper cavity pressurization on force coefficients for two different viscosity fluids. Results indicate an increase in stiffness and a decrease in damping when increasing the frequency of excitation. Damper cavity pressurization was shown to eliminate squeeze film cavitation for the vibration amplitudes and frequency range in the study. Additionally, the paper advances a transient fluid–structure interaction (FSI) analysis aimed at gaining insight on the interaction of flexible elements bounding a hermetic fluid volume experiencing sinusoidal vibratory motion. The analysis considers an idealized damper model with and without a vibration transmission post while varying diaphragm modulus of elasticity for three excitation frequencies. Computational results were able to capture the increase in stiffness and the decrease in damping and show that the flexibility of the bounding elements influence the damper cavity volume change and phase ultimately affecting dynamic cavity pressures and force coefficients.


  • Dynamic Characterization of a Novel Externally Pressurized Compliantly Damped Gas-Lubricated Bearing With Hermetically Sealed Squeeze Film Damper Modules

    by Adolfo Delgado, Bugra Ertas

    Ever-increasing demand for cleaner energy is driving the need for higher power density turbomachinery while reducing cost and simplifying design. Gas-lubricated bearings are representing one of the enabling technologies that can help maximize these benefits and have been successfully implemented into turbomachinery applications with rotors weights in the order few kg's. However, load capacity and damping limitations of existing gas bearing technologies prevent the development of larger size oil-free drive trains in the MW power output range. Compliantly damped hybrid gas bearings (CHGBs) were introduced as an alternative design to overcome these limitations by providing external pressurization to discrete tilting pads while retaining flexibility in the bearing support to help tolerate misalignment and rotor-pad geometry changes. Additionally, the CHGB concept addresses damping entitlement through the application of bearing support dampers such as metal mesh. An alternative CHGB design, featuring a novel hermetically seal squeeze film damper (HSFD) in the bearing support, was introduced as alternative approach to metal mesh dampers (MMDs) to further improve bearing damping. This paper details the rotordynamic characterization of a CHGB with modular HSFD for various operating conditions. Direct and cross-coupled stiffness and damping coefficients are presented for different rotor speeds up to 12,500 rpm, frequencies of excitation between 20 and 200 Hz, bearing loads between 200 and 400 lbf, and external hydrostatic pressures reaching 180 psi. Direct comparisons to experimental results for a CHGB using MMD show 3× increase in direct damping levels when using HSFD in the compliant bearing support. In addition to the experimental results, an analytical model is presented based on the implementation of the isothermal compressible Reynolds equation coupled to a flexible support possessing a pad with three degrees-of-freedom. The numerical results capture the direct stiffness and frequency dependency but underpredict the absolute values for both cases when compared to experimental data.


  • Hermetically Sealed Squeeze Film Damper for Operation in Oil-Free Environments

    by Bugra Ertas, Adolfo Delgado

    The following work advances a new concept for a hermetically sealed squeeze film damper (HSFD), which does not require an open-flow lubrication system. The hermetically sealed concept utilizes a submersed plunger within a contained fluidic cavity filled with incompressible fluid and carefully controlled end plate clearances to generate high levels of viscous damping. Although the application space for a hermetic damper can be envisioned to be quite broad, the context here will target the use of this device as a rotordynamic bearing support damper in flexibly mounted gas bearing systems. The effort focused on identifying the stiffness and damping behavior of the damper while varying test parameters such as excitation frequency, vibration amplitude, and end plate clearance. To gain further insight to the damper behavior, key dynamic pressure measurements in the damper land were used for identifying the onset conditions for squeeze film cavitation. The HSFD performance is compared to existing gas bearing support dampers and a conventional open-flow squeeze film dampers (SFD) used in turbomachinery. The damper concept yields high viscous damping coefficients an order of magnitude larger than existing oil-free gas bearing supports dampers and shows comparable damping levels to current state of the art open-flow SFD. The force coefficients were shown to contribute frequency-dependent stiffness and damping coefficients while exhibiting amplitude independent behavior within operating regimes without cavitation. Finally, using experimentally based force density calculations, the data revealed threshold cavitation velocities, approximated for the three end seal clearance cases. To complement the experimental work, a Reynolds-based fluid flow model was developed and is compared to the HSFD damping and stiffness results.


  • Compliant Hybrid Gas Bearing Using Modular Hermetically Sealed Squeeze Film Dampers

    by Bugra Ertas, Adolfo Delgado

    This paper presents a new gas bearing concept that targets machine applications in the megawatt (MW) power range. The concept involves combining a compliant hybrid gas bearing (CHGB) with two hermetically sealed squeeze film damper (HSFD) modules installed in the bearing support damper cavities. The main aim of the research was to demonstrate gas bearing-support damping levels using HSFD that rival conventional open-flow squeeze film dampers (SFD) in industry. A detailed description of the bearing design and functionality is discussed while anchoring the concept through a brief recap of past gas bearing concepts. Proof-of-concept experimental testing is presented involving parameter identification of the bearing support force coefficients along with a demonstration of speed and load capability using recessed hydrostatic pads. Finally, a landing test was performed on the bearing at high speed and load with porous carbon pads to show capability of sustaining rubs at high speeds. The component testing revealed robust viscous damping in the bearing support, which was shown to be comparable to existing state of the art SFD concepts. The damping and stiffness of the system-portrayed moderate frequency dependency, which was simulated using a 2D Reynolds-based incompressible fluid flow model. Finally, rotating tests demonstrated the ability of the gas bearing concept to sustain journal excursions and loads indicative of critical speed transitions experienced in large turbomachinery.