Mathias Kolle
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Mathias Kolle has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
Sara Nagelberg
Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA
5 shared publications- Timothy Manning Swager
Department of Chemistry, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139, USA
4 shared publications - Anthony D. McDougal
Massachusetts Institute of Technology 1 Department of Biology Cambridge, MA
3 shared publications - Bodo D. Wilts
Department of Chemistry and Physics of Materials, University of Salzburg 1 , Salzburg, Austria
3 shared publications - Ling Li
Department of Mechanical Engineering Virginia Polytechnic Institute and State University Blacksburg VA 24061 USA
3 shared publications Moritz Kreysing
Max Planck Institute of Molecular Cell Biology and Genetics, 01307 Dresden, Germany
3 shared publications
Latest Publications
- Open Access
- 7 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 8398
Shedding light on bacterial fitness in a tug-of-war with liquid crystal emulsions
Rapid and reliable quantification of bacterial dynamics at the cellular level is critical for pathogen sensing, live-dead bacterial assays, and monitoring of bacteria fitness and viability. Here, we demonstrate bacterial fitness quantification by capturing individual cells on topological defects of micro-scale liquid crystal emulsion droplets. The emulsion droplets are composed of phase-separated nematic liquid crystal and fluorocarbon components and exhibit an asymmetric mass distribution. A topological singularity in the director field of the liquid crystal phase localizes tailormade surfactants that tether a single bacterium per droplet. Active motion of the bacterium induces a tilt and azimuthal rotation of the droplet trap, which is counteracted by gravity acting on the droplet center of mass. By comparing the observed dynamics of a tethered bacterium’s stochastic movement to a computational model of bacterial motion on spherical surfaces that is based on the classical Ornstein-Uhlenbeck process, we quantify the fitness of bacteria subjected to starvation over several days. This pathogen fitness sensing concept, which relies on the scalable chemical design of single bacterial cell traps, a robust optical readout, and a theoretical understanding of bacterial dynamics on spherical surfaces, offers opportunities for rapid pathogen activity assessment, micro-biological sensing, and biologically powered micro-actuator systems.
- 7 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 8398
Open AccessShedding light on bacterial fitness in a tug-of-war with liquid crystal emulsions
Rapid and reliable quantification of bacterial dynamics at the cellular level is critical for pathogen sensing, live-dead bacterial assays, and monitoring of bacteria fitness and viability. Here, we demonstrate bacterial fitness quantification by capturing individual cells on topological defects of micro-scale liquid crystal emulsion droplets. The emulsion droplets are composed of phase-separated nematic liquid crystal and fluorocarbon components and exhibit an asymmetric mass distribution. A topological singularity in the director field of the liquid crystal phase localizes tailormade surfactants that tether a single bacterium per droplet. Active motion of the bacterium induces a tilt and azimuthal rotation of the droplet trap, which is counteracted by gravity acting on the droplet center of mass. By comparing the observed dynamics of a tethered bacterium’s stochastic movement to a computational model of bacterial motion on spherical surfaces that is based on the classical Ornstein-Uhlenbeck process, we quantify the fitness of bacteria subjected to starvation over several days. This pathogen fitness sensing concept, which relies on the scalable chemical design of single bacterial cell traps, a robust optical readout, and a theoretical understanding of bacterial dynamics on spherical surfaces, offers opportunities for rapid pathogen activity assessment, micro-biological sensing, and biologically powered micro-actuator systems.
- Open Access
- 8 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (24)
A biomineralized light-guiding structure in the porous calcitic skeleton of the sea star Protoreaster nodosus
Biomineralized structures produced by living organisms are widely recognized for their exceptional mechanical performance, yet their potential optical roles are relatively less explored. Here, we demonstrate that within the calcitic ossicle-based skeleton of the sea star Protoreaster nodosus , where each ossicle represents a discrete skeletal element, one specialized ossicle, known as the terminal plate, contains a radially arranged array of light-guiding structures (LGSs). These LGSs exhibit an elongated, cone-like geometry (~250 μm in length) and are embedded within the porous stereom, a characteristic meshwork architecture of echinoderms analogous to open-cell cellular solids and composed of magnesium-containing single-crystalline calcite. Optical experiments demonstrate that, unlike other skeletal elements, the terminal plate can transmit and focus light into an internal cavity via the LGS array. Combined optical analyses using ray-tracing and finite-difference time-domain simulations reveal that each LGS transmits ca . 70% of incident light at normal incidence and concentrates it up to 2.8-fold at its exiting surface. Furthermore, when acting collectively as the LGS array within the terminal plate, the LGSs capture light over a broad field of view (~120°), resulting in an integrated transmitted intensity that is sixfold to eightfold greater than the incoming intensity perceived by a single LGS. Although the biological function of this optical capability remains uncertain, this natural porous structure demonstrates that cellular solids can integrate efficient light-guiding behavior while enhancing mechanical properties (i.e., threefold increase in stiffness compared with random stereom), offering design insights for lightweight, multifunctional structures.
- 8 June 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (24)
Open AccessA biomineralized light-guiding structure in the porous calcitic skeleton of the sea star Protoreaster nodosus
Biomineralized structures produced by living organisms are widely recognized for their exceptional mechanical performance, yet their potential optical roles are relatively less explored. Here, we demonstrate that within the calcitic ossicle-based skeleton of the sea star Protoreaster nodosus , where each ossicle represents a discrete skeletal element, one specialized ossicle, known as the terminal plate, contains a radially arranged array of light-guiding structures (LGSs). These LGSs exhibit an elongated, cone-like geometry (~250 μm in length) and are embedded within the porous stereom, a characteristic meshwork architecture of echinoderms analogous to open-cell cellular solids and composed of magnesium-containing single-crystalline calcite. Optical experiments demonstrate that, unlike other skeletal elements, the terminal plate can transmit and focus light into an internal cavity via the LGS array. Combined optical analyses using ray-tracing and finite-difference time-domain simulations reveal that each LGS transmits ca . 70% of incident light at normal incidence and concentrates it up to 2.8-fold at its exiting surface. Furthermore, when acting collectively as the LGS array within the terminal plate, the LGSs capture light over a broad field of view (~120°), resulting in an integrated transmitted intensity that is sixfold to eightfold greater than the incoming intensity perceived by a single LGS. Although the biological function of this optical capability remains uncertain, this natural porous structure demonstrates that cellular solids can integrate efficient light-guiding behavior while enhancing mechanical properties (i.e., threefold increase in stiffness compared with random stereom), offering design insights for lightweight, multifunctional structures.
- Open Access
- 25 March 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (38) , e32173
Structure Formation in Butterfly Scales: Interplay of Genetic Control, Mechanical Instabilities, and Dynamic Material Properties
Butterfly scales contribute to a butterfly's vibrant coloration and play crucial roles in functions such as thermoregulation, water repellency, and aerodynamics. However, the underlying mechanisms that drive scale structure formation in vivo are not well understood. In this perspective, we propose that mechanical instabilities are central to the morphogenesis of scales and can lead to the observed wide variety of scale morphologies in adult butterflies. We specifically focus on the interplay between a growing soft compartment formed by the plasma membrane and an epicuticular envelope, the constraints imposed on this compartment by the actin cytoskeleton, and the spatio‐temporally heterogeneous sclerotization of the cuticle precursors. We discuss hypotheses on how intracellular processes control the composition of the cuticle precursor secreted into soft compartments and how mechanical instabilities may lead to the morphological diversity of ridges, lamellae, and other scale structures. Putting forward a set of hypotheses about the fundamental mechanical processes that enable the secretion of non‐living functional biological matter, we aim to inspire novel fabrication approaches in material science and engineering.
- 25 March 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (38) , e32173
Open AccessStructure Formation in Butterfly Scales: Interplay of Genetic Control, Mechanical Instabilities, and Dynamic Material Properties
Butterfly scales contribute to a butterfly's vibrant coloration and play crucial roles in functions such as thermoregulation, water repellency, and aerodynamics. However, the underlying mechanisms that drive scale structure formation in vivo are not well understood. In this perspective, we propose that mechanical instabilities are central to the morphogenesis of scales and can lead to the observed wide variety of scale morphologies in adult butterflies. We specifically focus on the interplay between a growing soft compartment formed by the plasma membrane and an epicuticular envelope, the constraints imposed on this compartment by the actin cytoskeleton, and the spatio‐temporally heterogeneous sclerotization of the cuticle precursors. We discuss hypotheses on how intracellular processes control the composition of the cuticle precursor secreted into soft compartments and how mechanical instabilities may lead to the morphological diversity of ridges, lamellae, and other scale structures. Putting forward a set of hypotheses about the fundamental mechanical processes that enable the secretion of non‐living functional biological matter, we aim to inspire novel fabrication approaches in material science and engineering.
- 1 August 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (32) , 6335-6337
Celebrating the 60th birthday and achievements of Professor Ulli Steiner
Stefan Guldin, Mathias Kolle, Silvia Vignolini, and Bodo D. Wilts introduce the Soft Matter themed collection on Celebrating the 60th birthday and achievements of Professor Ulli Steiner.
- 1 August 2025
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 21 (32) , 6335-6337
Celebrating the 60th birthday and achievements of Professor Ulli Steiner
Stefan Guldin, Mathias Kolle, Silvia Vignolini, and Bodo D. Wilts introduce the Soft Matter themed collection on Celebrating the 60th birthday and achievements of Professor Ulli Steiner.
- Open Access
- 8 March 2024
- Published by Springer Nature in Research Square
Shedding light on bacterial fitness in a tug-of-war with liquid crystal emulsions
Rapid and reliable quantification of bacterial dynamics at the cellular level is critical for pathogen sensing, live-dead bacterial assays, and monitoring of bacteria fitness and viability. Here, we demonstrate bacterial fitness quantification by capturing individual cells on topological defects of micro-scaleliquid crystal emulsion droplets. The emulsion droplets are composed of phase-separated nematic liquid crystal and fluorocarbon components and exhibit an asymmetric mass distribution. A topological singularity in the director field of the liquid crystal phase localizes tailormade surfactants that tether a single bacterium per droplet. Active motion of the bacterium induces a tilt and azimuthal rotation of the droplet trap, which is counteracted by gravity acting on the droplet center of mass. By comparing the observed dynamics of a tethered bacterium’s stochastic movement to a computational model of bacterial motion on spherical surfaces that is based on the classical Ornstein-Uhlenbeck process, we quantify the fitness of bacteria subjected to starvation over several days. This pathogen fitness sensing concept, which relies on the scalable chemical design of single bacterial cell traps, a robust optical readout, and a theoretical understanding of bacterial dynamics on spherical surfaces, offers opportunities for rapid pathogen activity assessment, micro-biological sensing, and biologically powered micro-actuator systems.
- 8 March 2024
- Published by Springer Nature in Research Square
Open AccessShedding light on bacterial fitness in a tug-of-war with liquid crystal emulsions
Rapid and reliable quantification of bacterial dynamics at the cellular level is critical for pathogen sensing, live-dead bacterial assays, and monitoring of bacteria fitness and viability. Here, we demonstrate bacterial fitness quantification by capturing individual cells on topological defects of micro-scaleliquid crystal emulsion droplets. The emulsion droplets are composed of phase-separated nematic liquid crystal and fluorocarbon components and exhibit an asymmetric mass distribution. A topological singularity in the director field of the liquid crystal phase localizes tailormade surfactants that tether a single bacterium per droplet. Active motion of the bacterium induces a tilt and azimuthal rotation of the droplet trap, which is counteracted by gravity acting on the droplet center of mass. By comparing the observed dynamics of a tethered bacterium’s stochastic movement to a computational model of bacterial motion on spherical surfaces that is based on the classical Ornstein-Uhlenbeck process, we quantify the fitness of bacteria subjected to starvation over several days. This pathogen fitness sensing concept, which relies on the scalable chemical design of single bacterial cell traps, a robust optical readout, and a theoretical understanding of bacterial dynamics on spherical surfaces, offers opportunities for rapid pathogen activity assessment, micro-biological sensing, and biologically powered micro-actuator systems.
- Top Cited Papers
- 1 August 2022
- Published by Springer Nature in Nature Materials
- Vol. 21 (9) , 1014-1018
Scalable optical manufacture of dynamic structural colour in stretchable materials
Structurally coloured materials that change their colour in response to mechanical stimuli are uniquely suited for optical sensing and visual communication1,2,3,4. The main barrier to their widespread adoption is a lack of manufacturing techniques that offer spatial control of the materials’ nanoscale structures across macroscale areas. Here, by adapting Lippmann photography5, we report an approach for producing large-area, structurally coloured sheets with a rich and easily controlled design space of colour patterns, spectral properties, angular scattering characteristics and responses to mechanical stimuli. Relying on just a digital projector and commercially available photosensitive elastomers, our approach is fast, scalable, affordable and relevant for a wide range of manufacturing settings. We also demonstrate prototypes for mechanosensitive healthcare materials and colorimetric strain and stress sensing for human–computer interaction and robotics.
- 1 August 2022
- Published by Springer Nature in Nature Materials
- Vol. 21 (9) , 1014-1018
Top Cited PapersScalable optical manufacture of dynamic structural colour in stretchable materials
Structurally coloured materials that change their colour in response to mechanical stimuli are uniquely suited for optical sensing and visual communication1,2,3,4. The main barrier to their widespread adoption is a lack of manufacturing techniques that offer spatial control of the materials’ nanoscale structures across macroscale areas. Here, by adapting Lippmann photography5, we report an approach for producing large-area, structurally coloured sheets with a rich and easily controlled design space of colour patterns, spectral properties, angular scattering characteristics and responses to mechanical stimuli. Relying on just a digital projector and commercially available photosensitive elastomers, our approach is fast, scalable, affordable and relevant for a wide range of manufacturing settings. We also demonstrate prototypes for mechanosensitive healthcare materials and colorimetric strain and stress sensing for human–computer interaction and robotics.
- Open Access
- 29 November 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118 (49)
In vivo visualization of butterfly scale cell morphogenesis in Vanessa cardui
During metamorphosis, the wings of a butterfly sprout hundreds of thousands of scales with intricate microstructures and nano-structures that determine the wings’ optical appearance, wetting characteristics, thermodynamic properties, and aerodynamic behavior. Although the functional characteristics of scales are well known and prove desirable in various applications, the dynamic processes and temporal coordination required to sculpt the scales’ many structural features remain poorly understood. Current knowledge of scale growth is primarily gained from ex vivo studies of fixed scale cells at discrete time points; to fully understand scale formation, it is critical to characterize the time-dependent morphological changes throughout their development. Here, we report the continuous, in vivo, label-free imaging of growing scale cells of Vanessa cardui using speckle-correlation reflection phase microscopy. By capturing time-resolved volumetric tissue data together with nanoscale surface height information, we establish a morphological timeline of wing scale formation and gain quantitative insights into the underlying processes involved in scale cell patterning and growth. We identify early differences in the patterning of cover and ground scales on the young wing and quantify geometrical parameters of growing scale features, which suggest that surface growth is critical to structure formation. Our quantitative, time-resolved in vivo imaging of butterfly scale development provides the foundation for decoding the processes and biomechanical principles involved in the formation of functional structures in biological materials. Significance Many organisms exhibit functional micro- and nanoscale materials with structural definition and performance that challenge synthetic fabrication techniques, yet we know little about the processes that enable their formation. Using butterfly scales as a model system for functional biomaterials, we establish a timeline of scale formation and quantify relevant structural parameters for developing painted lady butterflies. We overcome challenges of previous efforts by imaging structure formation directly in living organisms, which allows us to continuously observe the evolving wing tissue and the fine details of individual scale cells. Visualization of scale structure formation in live butterflies forms the basis for modeling the underlying biomechanical processes and opens avenues for their translation into advanced fabrication strategies.
- 29 November 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118 (49)
Open AccessIn vivo visualization of butterfly scale cell morphogenesis in Vanessa cardui
During metamorphosis, the wings of a butterfly sprout hundreds of thousands of scales with intricate microstructures and nano-structures that determine the wings’ optical appearance, wetting characteristics, thermodynamic properties, and aerodynamic behavior. Although the functional characteristics of scales are well known and prove desirable in various applications, the dynamic processes and temporal coordination required to sculpt the scales’ many structural features remain poorly understood. Current knowledge of scale growth is primarily gained from ex vivo studies of fixed scale cells at discrete time points; to fully understand scale formation, it is critical to characterize the time-dependent morphological changes throughout their development. Here, we report the continuous, in vivo, label-free imaging of growing scale cells of Vanessa cardui using speckle-correlation reflection phase microscopy. By capturing time-resolved volumetric tissue data together with nanoscale surface height information, we establish a morphological timeline of wing scale formation and gain quantitative insights into the underlying processes involved in scale cell patterning and growth. We identify early differences in the patterning of cover and ground scales on the young wing and quantify geometrical parameters of growing scale features, which suggest that surface growth is critical to structure formation. Our quantitative, time-resolved in vivo imaging of butterfly scale development provides the foundation for decoding the processes and biomechanical principles involved in the formation of functional structures in biological materials. Significance Many organisms exhibit functional micro- and nanoscale materials with structural definition and performance that challenge synthetic fabrication techniques, yet we know little about the processes that enable their formation. Using butterfly scales as a model system for functional biomaterials, we establish a timeline of scale formation and quantify relevant structural parameters for developing painted lady butterflies. We overcome challenges of previous efforts by imaging structure formation directly in living organisms, which allows us to continuously observe the evolving wing tissue and the fine details of individual scale cells. Visualization of scale structure formation in live butterflies forms the basis for modeling the underlying biomechanical processes and opens avenues for their translation into advanced fabrication strategies.
- 29 September 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (14) , 144503
Actuation of Janus Emulsion Droplets via Optothermally Induced Marangoni Forces
Microscale Janus emulsions represent a versatile material platform for dynamic refractive, reflective, and light-emitting optical components. Here, we present a mechanism for droplet actuation that exploits thermocapillarity. Using optically induced thermal gradients, an interfacial tension differential is generated across the surfactant-free internal capillary interface of Janus droplets. The interfacial tension differential causes droplet-internal Marangoni flows and a net torque, resulting in a predictable and controllable reorientation of the droplets. The effect can be quantitatively described with a simple model that balances gravitational and thermal torques. Occurring in small thermal gradients, these optothermally induced Marangoni dynamics represent a promising mechanism for controlling droplet-based micro-optical components.
- 29 September 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (14) , 144503
Actuation of Janus Emulsion Droplets via Optothermally Induced Marangoni Forces
Microscale Janus emulsions represent a versatile material platform for dynamic refractive, reflective, and light-emitting optical components. Here, we present a mechanism for droplet actuation that exploits thermocapillarity. Using optically induced thermal gradients, an interfacial tension differential is generated across the surfactant-free internal capillary interface of Janus droplets. The interfacial tension differential causes droplet-internal Marangoni flows and a net torque, resulting in a predictable and controllable reorientation of the droplets. The effect can be quantitatively described with a simple model that balances gravitational and thermal torques. Occurring in small thermal gradients, these optothermally induced Marangoni dynamics represent a promising mechanism for controlling droplet-based micro-optical components.
- Open Access
- 23 September 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 3 (1) , 2100043
Modular Assembly of Mechanoresponsive Color‐Changing Materials from Hydrogel‐Based Photonic Crystal Microspheres
Mechanoresponsive, soft, photonic materials with tunable structural coloration represent a class of materials that have potential benefits for a wide range of applications. While many lab‐scale fabrication approaches afford control over the nano‐ and microscale morphology of these materials, upscaling their manufacture remains a challenge. Herein, a scalable fabrication concept is proposed that centers on the modular assembly of color‐changing materials from microscale building blocks. The building blocks consist of hydrogel‐based spherical photonic crystals. They are formed through a water‐in‐oil emulsification of nanoscale colloidal particles suspended in the aqueous phase. Once formed, the photonic crystal microspheres are then assembled into macroscale photonic materials, such as stretchable fibers or sheets. The resulting materials respond to a mechanical deformation with a reversible, dynamic change in color. Fabricated via a scalable, modular‐assembly approach, these mechanoresponsive photonic fibers and sheets, in turn, form a valuable building block for sensing systems or visual communication in healthcare, architecture, and consumer product design.
- 23 September 2021
- Published by Wiley in Advanced Photonics Research
- Vol. 3 (1) , 2100043
Open AccessModular Assembly of Mechanoresponsive Color‐Changing Materials from Hydrogel‐Based Photonic Crystal Microspheres
Mechanoresponsive, soft, photonic materials with tunable structural coloration represent a class of materials that have potential benefits for a wide range of applications. While many lab‐scale fabrication approaches afford control over the nano‐ and microscale morphology of these materials, upscaling their manufacture remains a challenge. Herein, a scalable fabrication concept is proposed that centers on the modular assembly of color‐changing materials from microscale building blocks. The building blocks consist of hydrogel‐based spherical photonic crystals. They are formed through a water‐in‐oil emulsification of nanoscale colloidal particles suspended in the aqueous phase. Once formed, the photonic crystal microspheres are then assembled into macroscale photonic materials, such as stretchable fibers or sheets. The resulting materials respond to a mechanical deformation with a reversible, dynamic change in color. Fabricated via a scalable, modular‐assembly approach, these mechanoresponsive photonic fibers and sheets, in turn, form a valuable building block for sensing systems or visual communication in healthcare, architecture, and consumer product design.
- 17 June 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118 (25)
Microstructural design for mechanical–optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea
Biological systems have a remarkable capability of synthesizing multifunctional materials that are adapted for specific physiological and ecological needs. When exploring structure–function relationships related to multifunctionality in nature, it can be a challenging task to address performance synergies, trade-offs, and the relative importance of different functions in biological materials, which, in turn, can hinder our ability to successfully develop their synthetic bioinspired counterparts. Here, we investigate such relationships between the mechanical and optical properties in a multifunctional biological material found in the highly protective yet conspicuously colored exoskeleton of the flower beetle, Torynorrhina flammea. Combining experimental, computational, and theoretical approaches, we demonstrate that a micropillar-reinforced photonic multilayer in the beetle’s exoskeleton simultaneously enhances mechanical robustness and optical appearance, giving rise to optical damage tolerance. Compared with plain multilayer structures, stiffer vertical micropillars increase stiffness and elastic recovery, restrain the formation of shear bands, and enhance delamination resistance. The micropillars also scatter the reflected light at larger polar angles, enhancing the first optical diffraction order, which makes the reflected color visible from a wider range of viewing angles. The synergistic effect of the improved angular reflectivity and damage localization capability contributes to the optical damage tolerance. Our systematic structural analysis of T. flammea’s different color polymorphs and parametric optical and mechanical modeling further suggest that the beetle’s microarchitecture is optimized toward maximizing the first-order optical diffraction rather than its mechanical stiffness. These findings shed light on material-level design strategies utilized in biological systems for achieving multifunctionality and could thus inform bioinspired material innovations. Significance In the design of multifunctional materials, harnessing structural and compositional synergies while avoiding unnecessary trade-offs is critical in achieving high performance of all required functions. Biological material systems like the cuticles of many arthropods often fulfill multifunctionality through the intricate design of material structures, simultaneously achieving mechanical, optical, sensory, and other vital functionalities. A better understanding of the structural basis for multifunctionality and the functional synergies and trade-offs in biological materials could thus provide important insights for the design of bioinspired multifunctional materials. In this study, we demonstrate a concerted experimental, theoretical, and computational approach that uncovers the structure–mechanics–optics relationship of the beetle’s cuticle, opening avenues to investigate biological materials and design photonic materials with robust mechanical performance.
- 17 June 2021
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 118 (25)
Microstructural design for mechanical–optical multifunctionality in the exoskeleton of the flower beetle Torynorrhina flammea
Biological systems have a remarkable capability of synthesizing multifunctional materials that are adapted for specific physiological and ecological needs. When exploring structure–function relationships related to multifunctionality in nature, it can be a challenging task to address performance synergies, trade-offs, and the relative importance of different functions in biological materials, which, in turn, can hinder our ability to successfully develop their synthetic bioinspired counterparts. Here, we investigate such relationships between the mechanical and optical properties in a multifunctional biological material found in the highly protective yet conspicuously colored exoskeleton of the flower beetle, Torynorrhina flammea. Combining experimental, computational, and theoretical approaches, we demonstrate that a micropillar-reinforced photonic multilayer in the beetle’s exoskeleton simultaneously enhances mechanical robustness and optical appearance, giving rise to optical damage tolerance. Compared with plain multilayer structures, stiffer vertical micropillars increase stiffness and elastic recovery, restrain the formation of shear bands, and enhance delamination resistance. The micropillars also scatter the reflected light at larger polar angles, enhancing the first optical diffraction order, which makes the reflected color visible from a wider range of viewing angles. The synergistic effect of the improved angular reflectivity and damage localization capability contributes to the optical damage tolerance. Our systematic structural analysis of T. flammea’s different color polymorphs and parametric optical and mechanical modeling further suggest that the beetle’s microarchitecture is optimized toward maximizing the first-order optical diffraction rather than its mechanical stiffness. These findings shed light on material-level design strategies utilized in biological systems for achieving multifunctionality and could thus inform bioinspired material innovations. Significance In the design of multifunctional materials, harnessing structural and compositional synergies while avoiding unnecessary trade-offs is critical in achieving high performance of all required functions. Biological material systems like the cuticles of many arthropods often fulfill multifunctionality through the intricate design of material structures, simultaneously achieving mechanical, optical, sensory, and other vital functionalities. A better understanding of the structural basis for multifunctionality and the functional synergies and trade-offs in biological materials could thus provide important insights for the design of bioinspired multifunctional materials. In this study, we demonstrate a concerted experimental, theoretical, and computational approach that uncovers the structure–mechanics–optics relationship of the beetle’s cuticle, opening avenues to investigate biological materials and design photonic materials with robust mechanical performance.