Mondher Farza
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mondher Farza has a total of 145 co-authors. Here are the top co-authors by number of shared publications:
Mohammed M’sAad
Laboratoire d′Ingénierie des Systèmes (UR 7478), ENSICAEN, UNICAEN, Caen, France
7 shared publicationsTomas Ménard
7 shared publications- Mohammed M'Saad
Laboratoire d’Ingénierie des Systèmes (LIS, UR7478, Université de Caen Normandie, École Nationale Supérieure d’Ingénieurs de Caen), 6 Bd. Maréchal Juin, 14050 Caen, France
6 shared publications - Omar Hernández-González
Tecnológico Nacional de México, Instituto Tecnológico de Hermosillo, Av. Tecnológico 115, Hermosillo 83170, Sonora, Mexico
6 shared publications Salim Hadj Said
LA2SE, University of Monastir,National School of Engineering of Monastir,Tunisia
6 shared publications- Carlos Manuel Astorga Zaragoza
Tecnológico Nacional de México, Centro Nacional de Investigación y Desarrollo Tecnológico, Cuernavaca, México
5 shared publications
Latest Publications
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 71 (6) , 4184-4191
Cascade Observer Design for a Class of Disturbed Nonlinear Systems With State and Output Delays
This article provides a cascade observer design framework for a class of disturbed uniformly observable systems with arbitrary long (constant and known) time delays in both output and state variables. Two fundamental design features are worth mentioning to better appreciate the involved contribution of this article. First, a basic cascade observer is designed assuming that the structure of the system's nonlinear dynamics is triangular with respect to the actual and delayed states and that the system's linear dynamics is delay free. Second, the proposed design is extended to the case where the state delays are also involved in the linear dynamics. Such an extension is achieved by deriving a suitable cascade observer design model, allowing thereby to recover the modeling requirement of the proposed basic cascade observer design. The observer convergence analysis is performed using an adequate Lyapunov approach, and its performance and main properties are illustrated through probing simulation results.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automatic Control
- Vol. 71 (6) , 4184-4191
Cascade Observer Design for a Class of Disturbed Nonlinear Systems With State and Output Delays
This article provides a cascade observer design framework for a class of disturbed uniformly observable systems with arbitrary long (constant and known) time delays in both output and state variables. Two fundamental design features are worth mentioning to better appreciate the involved contribution of this article. First, a basic cascade observer is designed assuming that the structure of the system's nonlinear dynamics is triangular with respect to the actual and delayed states and that the system's linear dynamics is delay free. Second, the proposed design is extended to the case where the state delays are also involved in the linear dynamics. Such an extension is achieved by deriving a suitable cascade observer design model, allowing thereby to recover the modeling requirement of the proposed basic cascade observer design. The observer convergence analysis is performed using an adequate Lyapunov approach, and its performance and main properties are illustrated through probing simulation results.
- 28 November 2025
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 13 (8) , 633
Filtered Extended Observer for Building-like structure Under Disturbed Sampled Outputs
- 28 November 2025
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 13 (8) , 633
Filtered Extended Observer for Building-like structure Under Disturbed Sampled Outputs
- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 335-340
The Filtered Saturated High Gain Observer for Trajectory Tracking of a Quadrotor
This paper presents an implementation of two high-gain observers, the Filtered High-Gain Observer (FHGO) and the Saturated Filtered High-Gain Observer (SAT-FHGO), for trajectory tracking of a quadrotor unmanned aerial vehicle (UAV) subjected to disturbances and measurement noise. The quadrotor’s dynamics are modeled as a nonlinear system that incorporates aerodynamic drag, control inputs, and external perturbations. We develop a robust control framework by integrating disturbance estimates from the SAT-FHGO and FHGO with a proportional-derivative (PD) controller and a supertwisting algorithm, thereby enhancing disturbance rejection and noise attenuation. Each observer estimates unmeasured states and time-varying disturbances, enabling accurate tracking even in the presence of large initialization errors and high-frequency noise. The proposed approach achieves noise reduction proportional to $\theta^{(r+1)}$, where $\theta$ is the chosen high-gain parameter and r denotes the order of the filter, offering a substantial improvement compared to the standard high-gain observer. Under appropriate conditions on the selection of $\theta$ and r, this can lead to up to $90 \%$ noise reduction. Simulation results demonstrate that the SAT-FHGO outperforms both the Standard HighGain Observer (SHGO) and the FHGO by significantly reducing peaking phenomena and improving steady-state stability. The approach guarantees bounded estimation and robustness against model uncertainties, making it well suited for real-world UAV applications.- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 335-340
The Filtered Saturated High Gain Observer for Trajectory Tracking of a Quadrotor
This paper presents an implementation of two high-gain observers, the Filtered High-Gain Observer (FHGO) and the Saturated Filtered High-Gain Observer (SAT-FHGO), for trajectory tracking of a quadrotor unmanned aerial vehicle (UAV) subjected to disturbances and measurement noise. The quadrotor’s dynamics are modeled as a nonlinear system that incorporates aerodynamic drag, control inputs, and external perturbations. We develop a robust control framework by integrating disturbance estimates from the SAT-FHGO and FHGO with a proportional-derivative (PD) controller and a supertwisting algorithm, thereby enhancing disturbance rejection and noise attenuation. Each observer estimates unmeasured states and time-varying disturbances, enabling accurate tracking even in the presence of large initialization errors and high-frequency noise. The proposed approach achieves noise reduction proportional to $\theta^{(r+1)}$, where $\theta$ is the chosen high-gain parameter and r denotes the order of the filter, offering a substantial improvement compared to the standard high-gain observer. Under appropriate conditions on the selection of $\theta$ and r, this can lead to up to $90 \%$ noise reduction. Simulation results demonstrate that the SAT-FHGO outperforms both the Standard HighGain Observer (SHGO) and the FHGO by significantly reducing peaking phenomena and improving steady-state stability. The approach guarantees bounded estimation and robustness against model uncertainties, making it well suited for real-world UAV applications.- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 329-334
Saturated Filtered High Gain Observer Design for Lateral Control of Autonomous Vehicles Under Steering Faults
This work presents a fault-tolerant control strategy for the lateral dynamics of autonomous vehicles subject to steering actuator faults. A Saturated Filtered High Gain Observer (SFHGO) is proposed to estimate both the full state and the fault signal in a nonlinear vehicle model. The proposed nonlinear observer provides accurate and fast estimation under unknown steering actuator failure. The estimated fault is actively compensated through a nonlinear feedback control law, ensuring robust trajectory tracking performance even in the presence of faults. The effectiveness and robustness of the proposed Active Fault-Tolerant Control strategy are demonstrated through simulations and validated using real data on the SHERPA simulator, confirming its potential for realworld autonomous applications.
- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 329-334
Saturated Filtered High Gain Observer Design for Lateral Control of Autonomous Vehicles Under Steering Faults
This work presents a fault-tolerant control strategy for the lateral dynamics of autonomous vehicles subject to steering actuator faults. A Saturated Filtered High Gain Observer (SFHGO) is proposed to estimate both the full state and the fault signal in a nonlinear vehicle model. The proposed nonlinear observer provides accurate and fast estimation under unknown steering actuator failure. The estimated fault is actively compensated through a nonlinear feedback control law, ensuring robust trajectory tracking performance even in the presence of faults. The effectiveness and robustness of the proposed Active Fault-Tolerant Control strategy are demonstrated through simulations and validated using real data on the SHERPA simulator, confirming its potential for realworld autonomous applications.
- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 317-322
Output Feedback Control with Cascaded Filtered High-Gain and Disturbance Observers for Rehabilitation Exoskeletons
Accurate trajectory tracking in rehabilitation exoskeletons remains challenging due to measurement noise, nonlinear dynamics, and unpredictable disturbances arising from human-robot interaction. This paper presents a novel control architecture that combines a flatness-based control law with cascaded filtered observers to enhance robustness and estimation accuracy. A Filtered High-Gain Observer (FHGO) is developed to estimate joint angular velocities while attenuating the effect of measurement noise. In parallel, a Disturbance Observer (DO) is designed to estimate abrupt external torques resulting from the interaction between the exoskeleton and the user. The estimated states and disturbances are then integrated into the flatness-based control law to ensure precise and robust trajectory tracking. The effectiveness of the proposed strategy is validated through numerical simulations under a realistic scenario. Simulation results demonstrate excellent tracking performance and strong disturbance rejection capability, highlighting the potential of this control structure for real-time rehabilitation assistance.
- 22 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 317-322
Output Feedback Control with Cascaded Filtered High-Gain and Disturbance Observers for Rehabilitation Exoskeletons
Accurate trajectory tracking in rehabilitation exoskeletons remains challenging due to measurement noise, nonlinear dynamics, and unpredictable disturbances arising from human-robot interaction. This paper presents a novel control architecture that combines a flatness-based control law with cascaded filtered observers to enhance robustness and estimation accuracy. A Filtered High-Gain Observer (FHGO) is developed to estimate joint angular velocities while attenuating the effect of measurement noise. In parallel, a Disturbance Observer (DO) is designed to estimate abrupt external torques resulting from the interaction between the exoskeleton and the user. The estimated states and disturbances are then integrated into the flatness-based control law to ensure precise and robust trajectory tracking. The effectiveness of the proposed strategy is validated through numerical simulations under a realistic scenario. Simulation results demonstrate excellent tracking performance and strong disturbance rejection capability, highlighting the potential of this control structure for real-time rehabilitation assistance.
- 25 September 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 165
Event-triggered shared control for lane keeping assist system in steer-by-wire vehicles under unknown dynamics and actuator failure
- 25 September 2025
- Published by Elsevier in Control Engineering Practice
- Vol. 165
Event-triggered shared control for lane keeping assist system in steer-by-wire vehicles under unknown dynamics and actuator failure
- Open Access
Observer for Nonlinear Systems with Time-Varying Delays: Application to a Two-Degrees-of-Freedom Helicopter
This paper deals with the problem of the estimation of non-uniformly nonlinear systems with time-varying delays in the state and input. In addition, the problem of the sampled output measurement is also been addressed. Thus, an observer design for a class of uncertain, non-uniformly nonlinear systems in the presence of time-varying delay is proposed. A continuous–discrete observer based on a high-gain approach is designed to achieve undelayed estimation. Thus, sufficient conditions to ensure the convergence of the observer are obtained. The analysis is based on a Lyapunov–Krasovskii functional, which shows that the bounded observation error depends on the sizes of the known upper delay and the upper sampling rate. The performance of the proposed algorithm is evaluated by considering a control-based observer for a two-degrees-of-freedom helicopter system with a known time-varying delay and sampled output measurements.
Open AccessObserver for Nonlinear Systems with Time-Varying Delays: Application to a Two-Degrees-of-Freedom Helicopter
This paper deals with the problem of the estimation of non-uniformly nonlinear systems with time-varying delays in the state and input. In addition, the problem of the sampled output measurement is also been addressed. Thus, an observer design for a class of uncertain, non-uniformly nonlinear systems in the presence of time-varying delay is proposed. A continuous–discrete observer based on a high-gain approach is designed to achieve undelayed estimation. Thus, sufficient conditions to ensure the convergence of the observer are obtained. The analysis is based on a Lyapunov–Krasovskii functional, which shows that the bounded observation error depends on the sizes of the known upper delay and the upper sampling rate. The performance of the proposed algorithm is evaluated by considering a control-based observer for a two-degrees-of-freedom helicopter system with a known time-varying delay and sampled output measurements.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 201-206
Super Twisting Algorithm for Two Wheeled Inverted Pendulum with Unmeasured State
In this paper, a super twisting algorithm has been formulated for the tracking control of a two-wheeled inverted pendulum subject to external disturbances. Initially, a model of the two-wheeled inverted pendulum was established without resorting to linearization. Subsequently, a high gain observer was been designed for the two wheeled self balancing robot in order to estimate unmeasured states. Then, the designed High Gain Observer was combined with the Super Twisting algorithm to obtain a robust controller that is able to achieve the tracking objectives and to compensate the presence of disturbances. The stability of the closed-loop system is methodically substantiated through rigorous Lyapunov analysis. Numerical simulations meticulously underscore the performance of the implemented controller in the presence of disturbances.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 201-206
Super Twisting Algorithm for Two Wheeled Inverted Pendulum with Unmeasured State
In this paper, a super twisting algorithm has been formulated for the tracking control of a two-wheeled inverted pendulum subject to external disturbances. Initially, a model of the two-wheeled inverted pendulum was established without resorting to linearization. Subsequently, a high gain observer was been designed for the two wheeled self balancing robot in order to estimate unmeasured states. Then, the designed High Gain Observer was combined with the Super Twisting algorithm to obtain a robust controller that is able to achieve the tracking objectives and to compensate the presence of disturbances. The stability of the closed-loop system is methodically substantiated through rigorous Lyapunov analysis. Numerical simulations meticulously underscore the performance of the implemented controller in the presence of disturbances.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 459-463
Evolved State Feadback Control for Manipulator Robots
This paper presents the evolved state feedback control applied to manipulator robots with parameter uncertainties and external disturbances. A high gain control, based on the state feedback, is used in order to guarantee a high performances such as precision and stability of the system despite of the presence of the parameter uncertainties and disturbances. Furthermore, this control provide a smooth signal control that is favorable for the robot actuators. The stability of the control is proved using the Lyapunov approach. Some simulations results present the application of this control to a two degree of freedom manipulator robot and prove its effectiveness.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 459-463
Evolved State Feadback Control for Manipulator Robots
This paper presents the evolved state feedback control applied to manipulator robots with parameter uncertainties and external disturbances. A high gain control, based on the state feedback, is used in order to guarantee a high performances such as precision and stability of the system despite of the presence of the parameter uncertainties and disturbances. Furthermore, this control provide a smooth signal control that is favorable for the robot actuators. The stability of the control is proved using the Lyapunov approach. Some simulations results present the application of this control to a two degree of freedom manipulator robot and prove its effectiveness.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 177-182
Suitable Temperatures and Reaction Heats Estimation within an Intensified Heat Exchanger/Reactor
This paper addresses the estimation problem of temperatures and reaction heat within an intensified heat exchanger/reactor (HEX reactor) from the available temperature measurements, namely the input and output temperature measurements. This estimation is performed by a high gain cascade observer incorporating a suitable saturation function to deal with the peaking phenomena which will referred to as a suitable high gain cascade observer (SHGCO). This observer has been developed from a recent research activity devoted to the high gain observer engineering features bearing in mind promising modelling results of the HEX reactor involving a cascade of sub-reactor models. The effectiveness of the proposed SHGCO has been illustrated throughout relevant simulation results with particular emphasis on the estimation accuracy and the remarkable peaking phenomenon reduction during transition periods.
- 18 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 177-182
Suitable Temperatures and Reaction Heats Estimation within an Intensified Heat Exchanger/Reactor
This paper addresses the estimation problem of temperatures and reaction heat within an intensified heat exchanger/reactor (HEX reactor) from the available temperature measurements, namely the input and output temperature measurements. This estimation is performed by a high gain cascade observer incorporating a suitable saturation function to deal with the peaking phenomena which will referred to as a suitable high gain cascade observer (SHGCO). This observer has been developed from a recent research activity devoted to the high gain observer engineering features bearing in mind promising modelling results of the HEX reactor involving a cascade of sub-reactor models. The effectiveness of the proposed SHGCO has been illustrated throughout relevant simulation results with particular emphasis on the estimation accuracy and the remarkable peaking phenomenon reduction during transition periods.