JXJun Xiao

Jun Xiao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jun Xiao has a total of 34 co-authors. Here are the top co-authors by number of shared publications:

  • Dajun Huan

    R&D Center for Composites Industry Automation, College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

    3 shared publications
  • Jiaqi Shi

    College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

    3 shared publications
  • Junsheng Wang

    R&D Center for Composites Industry Automation, College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

    3 shared publications
  • Yuequan Wang

    College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, PR China

    3 shared publications
  • Junwei Qi

    College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

    2 shared publications
  • Lei Yan

    R&D Center for Composites Industry Automation, College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

    2 shared publications

Latest Publications

  • Open Access

    A Peel Test Method to Characterize the Decay Law of Prepreg Tape Tack at Different Temperatures

    by Jiaqi Shi, Wang Wang, Yuequan Wang, Junwei Qi, Jun Xiao

    The tack of prepreg is a key factor affecting the automatic tape laying process. During the manufacturing process of large composite parts, prepreg material may be stored at room temperature for several days, resulting in a decrease in its tack. In this study, a new tack test tool was designed, and the decay rate of prepreg tack at different temperatures was tested. We proposed a prepreg tack decay model, which assumes that the main factor in tack decay is the reduction in resin chain activity during storage. The maximum deviation between the model calculation results and the experimental results of the tack decay rate is 9.7%. This study also proposed a new statistical unit for prepreg tack, which can establish the relationship between the tack of prepreg and its remaining storage time and reduce prepreg management costs.


  • Open Access

    Microstructure and Impact Toughness of Laser-Arc Hybrid Welded Joint of Medium-Thick TC4 Titanium Alloy

    by Peng Luo, Wanxi Feng, Gang Zu, Linyin Luo, Jun Xiao

    This study delves into the impact toughness of medium-thick (12 mm thick) titanium alloy joints crafted through a multi-layer, multi-pass welding technique that blends laser-arc (MIG) hybrid welding technology. Microstructural scrutiny, employing optical microscopy, SEM and TEM, unveils a consistent composition across weld passes, with prevailing α/α′ phases interspersed with some β phase, resulting in basket-weave structures primarily dominated by acicular α′ martensite. However, upper regions exhibit Widmanstatten microstructures, potentially undermining joint toughness. Hardness testing indicates higher values in cosmetic layers (~420 HV) compared to backing layers and bending tests manifest superior toughness in lower joint regions, attributed to smaller grain sizes induced by repetitive welding thermal cycles. Impact toughness assessment unveils diminished values in the weld metal (WM) compared to the heat-affected zone (HAZ) and base material (BM), amounting to 91.3% of the base metal’s absorption energy. This decrement is ascribed to heightened porosity in upper regions and variations in grain size and phase composition due to multi-layer, multi-pass welding. Microstructural analysis proximal to failure sites suggests one mechanism wherein crack propagation is impeded by the β phase at acute crack angles. In essence, this study not only underscores the practicality of laser-MIG hybrid welding for medium-thick TC4 alloy plates but also underscores the reliability of joint mechanical properties.


  • Open Access

    A Peel Test Method to Characterise the Decay Law of Prepreg Tape Tack at Different Temperatures

    by Jiaqi Shi, Wang Wang, Yuequan Wang, Junwei Qi, Jun Xiao

    Tack is one of the most important factors affecting the operability of prepregs, but it is still very difficult to obtain the change of prepreg tack with time at different temperatures. In this paper, a newly designed T-peel device is used to test the tack decay rate of prepregs at different temperatures. The obtained decay rate deviates less than 8.9% from the manufacturer's data. The maximum deviation of the ratio of tack decay speeds calculated by the Arrhenius equation from the experiments is not higher than -9.7%. It is proved that the present method can obtain the decay rate of tack of prepregs at different temperatures. This method is also applicable to the other two types of prepregs. The article proposes the handling life unit, an operational life measurement unit for prepregs, and establishes that the relationship between tack and remaining shelf life reduces prepreg management costs.


  • Open Access

    Stress and Deformation Analysis of Prestressed Wound Composite Components with an Arch-Shaped Metal Liner

    by Junsheng Wang, Jun Xiao, Dajun Huan, Lei Yan, Zijie Wang, Zhiwei Tao

    The stress distribution in prestressed filament wound components plays a crucial role in determining the quality of these components during their operational lifespan. This article proposes a physical model to analyze the stress and deformation of prestressed wound composite components with arch-shaped sections. Drawing upon the principles of beam theory, we delve into the analysis of prestressed wound components with metal liners featuring arch-shaped sections. Our investigation revealed a noteworthy phenomenon termed the “additional bending moment effect” within prestressed wound components with arch-shaped sections. Furthermore, this study establishes a relationship between this additional bending moment and the external pressure. In addition, a 3D finite element (FE) model for prestressed wound components with arch-shaped sections incorporating metal liners was developed. The model’s accuracy was validated through a comparison with prestressed wound experiments, showcasing an error margin of less than 2%. In comparison with prestressed wound components with circular cross-sections under identical load and dimensional parameters, it was observed that prestressed wound components with arch-shaped sections exhibit stress distributions in the arc segments akin to their circular counterparts, with differences not exceeding 5%. Notably, when the ratio of the straight segment length to the inner diameter of the arc segment inner is less than 4, the deformation on the symmetric plane of the arc segment in an arch-shaped component can be effectively considered as the summation of deformations in equivalent-sized arc and straight segments under identical loading conditions. This yields an equivalent physical model and a streamlined analysis and design methodology for describing the deformation characteristics of prestressed wound components with arch-shaped sections.


  • Open Access

    Factors Influencing the Expansion of Arch-Shaped Electromagnetic Railguns with Pre-Stressed Composite Barrels

    by Junsheng Wang, Jun Xiao, Dajun Huan, Lei Yan

    Rail expansion significantly impacts the launch precision of a railgun system. Higher precision can be achieved when the extent of expansion is low. This paper investigates three main factors that influence the extent of rail expansion using the finite element method, including pre-stress, electromagnetic load, and stiffness of the insulators. The mean squared error between experiment results and simulating results is less than 0.06, validating the finite element model. The simulated results reveal that the extent of rail expansion increases with a decrease in pre-stress and an increase in electromagnetic pressure and the stiffness of the insulator is the most significant influencing factor, as the use of a stiff insulator not only results in a small extent of rail expansion but also delays the separation between the rails and insulators. The mechanism of how pre-stress influences the railgun system has been proposed. It has been expressed that the pre-stress maintains the integrity of the railgun system by hindering the process of a decrease in the contact surface area between rails and insulators during launch. The study provides a platform to improve the design of the railgun system.


  • Open Access

    Study of Allowable Interlaminar Normal Stress Based on the Time–Temperature Equivalence Principle in Automated Fiber Placement Process

    by Rui Xiao, Jiaqi Shi, Jun Xiao

    Automatic fiber placement (AFP) is a type of labor-saving automatic technology for forming composite materials that are widely used in aviation and other fields. In this process, concave surface delamination is a common defect, as existing research on the conditions for this defect to occur is insufficient. To predict the occurrence of this defect, the concept of allowable interlaminar normal stress is proposed to define its occurrence conditions, and based on this concept, probe tests are carried out using the principle of time–temperature equivalence. Through the laying speed/allowable normal stress curve measured in the probe experiment, the physical meaning of allowable normal stress is discussed. At the same time, the measured curve is quantitatively analyzed, combined with viscoelastic theory and the molecular diffusion reptation model, and the dominating effect in the formation of a metal/prepreg layer and prepreg/prepreg layer is determined. Finally, the experimental data are used to guide the parameter selection in an automatic placement engineering case and prove its correctness.


  • Open Access

    Numerical and Experiment Studies of Different Path Planning Methods on Mechanical Properties of Composite Components

    by Dongli Wang, Jun Xiao, Xiangwen Ju, Mingyue Dou, Liang Li, Xianfeng Wang

    The purpose of this paper is to study the effects of different trajectory planning methods on the mechanical properties of components. The scope of the research includes finite element simulation calculation and experimental tests of the actual structure. The test shall be carried out in the whole load range until the failure of the structure occurs. Taking the composite conical shell as an example, a variable angle initial path generation method of the conical shell surface is proposed, and the parallel offset algorithms based on partition and the circumferential averaging are proposed to fill the surface. Then, finite element analysis is carried out for the paths that satisfy the manufacturability requirements, the analysis results show that the maximum deformation and maximum transverse as well as longitudinal stress of fiber of circumferential averaging variable angle path conical shell are reduced by 16.3%, 5.85%, and 19.76%, respectively, of that of the partition variable angle path. Finally, the strength analysis of conical shells manufactured by different trajectory design schemes is carried out through finite element analysis and actual failure tests. The finite element analysis results are in good agreement with the experimental results of the actual structure. The results show that the circumferential uniform variable angle has good quality, and it is proved that the path planning algorithm that coordinates path planning and defect suppression plays an important role in optimizing placement trajectory and improving mechanical properties of parts.


  • Microwave curing kinetics of carbon‐fiber‐reinforced epoxy composites by wet filament winding process

    by Mengying Li, Jun Xiao, Xingbang Wang, Xiao Yang, Xiaodong Chen

    A high‐performance compound epoxy resin system suitable for wet filament winding was designed. The glass transition temperature reached 181.3°C, and the tensile strength, tensile modulus, and elongation of the resin casting body were 90.82 MPa, 3312.72 MPa, and 4.17%, respectively. In order to explore the mechanism of microwave curing, the microwave curing kinetics of the composites was studied. Based on differential scanning calorimetry, the curing degree and curing reaction rate of thermal and microwave curing composites were compared. The results showed that the curing degree and curing reaction rate of microwave curing composites were higher than that of thermal curing in the early and middle stages of curing reaction. The heat transfer mechanism model was proposed. The heat transfer of carbon fiber after absorbing wave is the reason for the above‐mentioned phenomenon. In the later stage of curing reaction, the steric hindrance effect is greater than that of heat transfer mechanism on curing degree and curing rate, so there is little difference between the two curing methods. The kinetic parameters of thermal and microwave curing were calculated by the Malek method, and the activation energies were 70.40 kJ/mol and 61.18 kJ/mol, respectively. The correlation coefficient R2 between the curing degree calculated by kinetic equation of microwave curing and measured by experiment was 0.951, indicating that the kinetic equation was in good agreement with the experimental results.


  • Layup quality evaluation of fiber trajectory based on prepreg tow deformability for automated fiber placement

    by Cong Zhao, Jun Xiao, Wei Huang, Xinjie Huang, Shanqun Gu

    To conform to the fiber path, deformation of prepreg tow occurred inevitably in automated fiber placement process which would have great impact on layup quality. In order to evaluate whether fiber trajectory could be laid without prepreg distortion, fiber path layup quality was proposed and evaluated by prepreg tow deformation characteristic on free-form surface in this paper. Critical buckling radius of plane lateral bending was proposed as evaluation index for tow deformability. Layup quality of fiber trajectory was evaluated by the relationship between geodesic radius of trajectory and critical buckling radius. If the former radius was larger than the latter radius, layup quality of fiber path was fairly good, but not vice versa. A series of layup experiments were conducted to verify the evaluation criterion. Results showed that fiber trajectory layup quality could be well evaluated by this criterion proposed in this paper. And fiber modulus, prepreg thickness, and process parameters played important roles in determining fiber trajectory layup quality evaluated by prepreg deformability. By adjusting layup process parameters during automatic layup process, deformation ability of prepreg tow can be improved and the layup quality of fiber path could be enhanced to a higher level.