Mawada Abdellatif
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mawada Abdellatif has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Ban Al-Hasani
Department of Civil Engineering and Built Environment, Faculty of Engineering Technology, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF, UK
5 shared publications - Iacopo Carnacina
School of Engineering and Built Environment, Liverpool John Moores University, Liverpool L3 3AF, UK
5 shared publications - Bashar F. Maaroof
Babylon Center for Civilization and Historical Studies, University of Babylon, Hillah, Babil 51001, IRAQ
4 shared publications - Salah L. Zubaidi
Department of Civil Engineering, Wasit University, Wasit, Iraq
4 shared publications - Clare Harris
Department of Civil Engineering and Built Environment, Faculty of Engineering Technology, Liverpool John Moores University, Byrom Street, Liverpool L3 3AF, UK
3 shared publications Y. Osman
Faculty of Advanced Engineering and Sciences, University of Bolton, Deane Road, Bolton BL3 5AB, UK
3 shared publications
Latest Publications
- Open Access
- 5 October 2026
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 12 (5) , 271
Climate driven shifts in precipitation and mean temperature in western Iraq (Anbar Province): spatiotemporal projections using LARS-WG 8.0 and CMIP6
Understanding the spatial and seasonal redistribution of temperature and precipitation is essential for climate adaptation in arid regions. Although recent studies in Iraq have applied statistical downscaling and CMIP6 projections to selected watersheds and water-resource systems, province-scale assessments of how seasonal temperature and precipitation classes may spatially redistribute across Anbar Province under multi-model CMIP6 scenarios remain limited. To address this gap, this study evaluates near-term spatiotemporal changes in precipitation and mean temperature across western Iraq using LARS-WG 8.0 and a five-model CMIP6 ensemble. The model was applied to daily NASA POWER/MERRA-2 series extracted at seven station-referenced locations for the 1985–2015 baseline period. Climate conditions for 2021–2040 were projected using MRI-ESM2-0, CNRM-CM6-1, HadGEM3-GC31-LL, ACCESS-ESM1-5, and MPI-ESM1-2-LR under SSP245 and SSP585. Projected mean temperature showed an overall warming tendency, although the magnitude and spatial extent of change varied seasonally and between scenarios. Autumn warming under SSP245 and winter warming under both scenarios were spatially limited, whereas more extensive spatial shifts occurred during spring and summer, particularly under SSP585. The largest warming-related spatial shift occurred in spring under SSP585, when the area classified within the 25–30 °C range increased from 71.99% during the baseline period to 96.37%. Seasonal precipitation generally increased in autumn, winter, and spring under both scenarios. The most pronounced redistribution occurred in autumn under SSP245, when the 30–40 mm precipitation class expanded from 16.44% to 75.23% of the study area; in winter, the 40–50 mm class increased from 15.27% to 42.76%. These results provide spatially explicit evidence of near-term climate redistribution across Anbar Province and support water-resource planning and adaptation to increasing hydroclimatic variability in western Iraq.
- 5 October 2026
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 12 (5) , 271
Open AccessClimate driven shifts in precipitation and mean temperature in western Iraq (Anbar Province): spatiotemporal projections using LARS-WG 8.0 and CMIP6
Understanding the spatial and seasonal redistribution of temperature and precipitation is essential for climate adaptation in arid regions. Although recent studies in Iraq have applied statistical downscaling and CMIP6 projections to selected watersheds and water-resource systems, province-scale assessments of how seasonal temperature and precipitation classes may spatially redistribute across Anbar Province under multi-model CMIP6 scenarios remain limited. To address this gap, this study evaluates near-term spatiotemporal changes in precipitation and mean temperature across western Iraq using LARS-WG 8.0 and a five-model CMIP6 ensemble. The model was applied to daily NASA POWER/MERRA-2 series extracted at seven station-referenced locations for the 1985–2015 baseline period. Climate conditions for 2021–2040 were projected using MRI-ESM2-0, CNRM-CM6-1, HadGEM3-GC31-LL, ACCESS-ESM1-5, and MPI-ESM1-2-LR under SSP245 and SSP585. Projected mean temperature showed an overall warming tendency, although the magnitude and spatial extent of change varied seasonally and between scenarios. Autumn warming under SSP245 and winter warming under both scenarios were spatially limited, whereas more extensive spatial shifts occurred during spring and summer, particularly under SSP585. The largest warming-related spatial shift occurred in spring under SSP585, when the area classified within the 25–30 °C range increased from 71.99% during the baseline period to 96.37%. Seasonal precipitation generally increased in autumn, winter, and spring under both scenarios. The most pronounced redistribution occurred in autumn under SSP245, when the 30–40 mm precipitation class expanded from 16.44% to 75.23% of the study area; in winter, the 40–50 mm class increased from 15.27% to 42.76%. These results provide spatially explicit evidence of near-term climate redistribution across Anbar Province and support water-resource planning and adaptation to increasing hydroclimatic variability in western Iraq.
- Open Access
- 19 June 2026
- Published by Springer Nature in Natural Hazards
- Vol. 122 (12) , 514
Analysing impact of future emission scenarios on rainfall in rainfed agricultural zones in Northern Iraq using satellite data and CMIP6 models
The impacts of climate change on future rainfall in northern Iraq at fine temporal and coarse spatial resolutions, covering all areas where rainfed agriculture is located and where large water-harvesting dams are being built, remain unclear. The study aims to investigate spatial-temporal changes in rainfall and their future projections in northern Iraq for the period 2021–2040 under two emission scenarios (i.e., SSP245 and SSP585). The LARS-WG model is calibrated using daily rainfall data from the baseline period (1985 to 2015) at 20 meteorological stations across five governorates, and is integrated with six global circulation models to project future rainfall. Python code, ArcGIS 10.8.2, and IDW were used to visualise the precipitation data. Results proved that rainfall in the southern and southwestern regions is significantly lower than in the northern and north-eastern regions. However, January to March tended to have greater rainfall than the other months from November to May, with a predominant rainfall range of 60–90 mm. These conditions are expected to persist in the future under both scenarios. Projected precipitation under the SSP245 and SSP585 scenarios for the period 2021–2040 shows distinct spatial and temporal variability across the study area. However, reductions in low-rainfall areas and increases in higher precipitation classes were evident, with some areas expected to increase by > 120 mm. For instance, in March, the annual rainfall under SSP585 increased from 1.75% during 2006–2015 to 10.44% during 2031–2040. These findings introduce novel, spatially explicit insights that strengthen sustainable development planning by enabling targeted water resource management, climate adaptation strategies, and risk-informed infrastructure design under future climate scenarios.
- 19 June 2026
- Published by Springer Nature in Natural Hazards
- Vol. 122 (12) , 514
Open AccessAnalysing impact of future emission scenarios on rainfall in rainfed agricultural zones in Northern Iraq using satellite data and CMIP6 models
The impacts of climate change on future rainfall in northern Iraq at fine temporal and coarse spatial resolutions, covering all areas where rainfed agriculture is located and where large water-harvesting dams are being built, remain unclear. The study aims to investigate spatial-temporal changes in rainfall and their future projections in northern Iraq for the period 2021–2040 under two emission scenarios (i.e., SSP245 and SSP585). The LARS-WG model is calibrated using daily rainfall data from the baseline period (1985 to 2015) at 20 meteorological stations across five governorates, and is integrated with six global circulation models to project future rainfall. Python code, ArcGIS 10.8.2, and IDW were used to visualise the precipitation data. Results proved that rainfall in the southern and southwestern regions is significantly lower than in the northern and north-eastern regions. However, January to March tended to have greater rainfall than the other months from November to May, with a predominant rainfall range of 60–90 mm. These conditions are expected to persist in the future under both scenarios. Projected precipitation under the SSP245 and SSP585 scenarios for the period 2021–2040 shows distinct spatial and temporal variability across the study area. However, reductions in low-rainfall areas and increases in higher precipitation classes were evident, with some areas expected to increase by > 120 mm. For instance, in March, the annual rainfall under SSP585 increased from 1.75% during 2006–2015 to 10.44% during 2031–2040. These findings introduce novel, spatially explicit insights that strengthen sustainable development planning by enabling targeted water resource management, climate adaptation strategies, and risk-informed infrastructure design under future climate scenarios.
- Open Access
- 16 May 2026
- Published by Springer Nature in Water Resources Management
- Vol. 40 (8)
Streamflow Simulation Based on Pre-Processing-Based Hybrid Model: SSA-AR Model
An accurate medium-term streamflow forecast is one of the significant functions for managing and planning water resources. Considering the characteristics of trend, periodicity, and stochasticity of streamflow into account. So, this research aims to develop a new strategy, including a singular spectrum analysis (SSA) technique and a linear autoregressive (AR) model to predict monthly Tigris River streamflow data with three scenarios. The first scenario applies the SSA to decompose the normalised and cleaned time series into different signals (i.e., trend, seasonal, stochastic, and noise), then reconstruct the signals without noise and use the AR model to simulate the new time series. The second scenario employs the AR model to forecast each signal of streamflow without noise separately. The simulated time series was obtained by summing each predicted signal. The third scenario uses the AR model to simulate the raw data. Based on several statistical tests, the comparative analysis reveals that the first and second scenarios were much more accurate than the third ones. The second scenario is the best, reaching RMSE = 0.1223 (m 3 /s) and MAE = 0.0913 (m 3 /s) in the testing phase. The novelty of this study lies in the comparative evaluation of three SSA-AR modelling scenarios and the finding that forecasting decomposed components individually leads to superior accuracy compared to conventional approaches. The results are of substantial significance to the Ministry of Water Resources in managing and planning freshwater resources amid growing water demand.
- 16 May 2026
- Published by Springer Nature in Water Resources Management
- Vol. 40 (8)
Open AccessStreamflow Simulation Based on Pre-Processing-Based Hybrid Model: SSA-AR Model
An accurate medium-term streamflow forecast is one of the significant functions for managing and planning water resources. Considering the characteristics of trend, periodicity, and stochasticity of streamflow into account. So, this research aims to develop a new strategy, including a singular spectrum analysis (SSA) technique and a linear autoregressive (AR) model to predict monthly Tigris River streamflow data with three scenarios. The first scenario applies the SSA to decompose the normalised and cleaned time series into different signals (i.e., trend, seasonal, stochastic, and noise), then reconstruct the signals without noise and use the AR model to simulate the new time series. The second scenario employs the AR model to forecast each signal of streamflow without noise separately. The simulated time series was obtained by summing each predicted signal. The third scenario uses the AR model to simulate the raw data. Based on several statistical tests, the comparative analysis reveals that the first and second scenarios were much more accurate than the third ones. The second scenario is the best, reaching RMSE = 0.1223 (m 3 /s) and MAE = 0.0913 (m 3 /s) in the testing phase. The novelty of this study lies in the comparative evaluation of three SSA-AR modelling scenarios and the finding that forecasting decomposed components individually leads to superior accuracy compared to conventional approaches. The results are of substantial significance to the Ministry of Water Resources in managing and planning freshwater resources amid growing water demand.
- 1 May 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (5) , 1978-1997
Predicting Temperatures in an Extreme Climatic Environment Using Hybrid Neural Networks: Evaluating Noise Robustness
Predicting maximum temperatures is crucial across many fields and industries, including medicine, agriculture, energy, and climate research. Researchers have not treated the prediction of maximum temperatures under severe artificial data disturbance in much detail. So, it has not yet been understood. This research aims to integrate an artificial neural network (ANN) with the Guaranteed Convergence Arithmetic Operation Algorithm (GCAOA) to forecast monthly maximum temperatures while ensuring robustness to noise. Univariate data from Al-Hai City over 12 years were employed to build and assess the model. The performance of GCAOA was examined and compared with that of the two hybrid ANNs, the random forest, and the XGBoost models. Across various input scenarios, the results reveal that these three hybrid models achieved very good forecast performance compared with random forests and XGBoost. The GCAOA-ANN (swarm size of 20 and lag2) achieves the best forecast performance among the hybrid algorithms across different statistical fitness measures with a coefficient of determination, Nash-Sutcliffe coefficient, and root mean squared error of 0.972, 0.969, and 1.7354°C, respectively. The performance of the hybrid ANN models was further investigated under noise, and the results showed the superiority of the GCAOA-ANN model.
- 1 May 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (5) , 1978-1997
Predicting Temperatures in an Extreme Climatic Environment Using Hybrid Neural Networks: Evaluating Noise Robustness
Predicting maximum temperatures is crucial across many fields and industries, including medicine, agriculture, energy, and climate research. Researchers have not treated the prediction of maximum temperatures under severe artificial data disturbance in much detail. So, it has not yet been understood. This research aims to integrate an artificial neural network (ANN) with the Guaranteed Convergence Arithmetic Operation Algorithm (GCAOA) to forecast monthly maximum temperatures while ensuring robustness to noise. Univariate data from Al-Hai City over 12 years were employed to build and assess the model. The performance of GCAOA was examined and compared with that of the two hybrid ANNs, the random forest, and the XGBoost models. Across various input scenarios, the results reveal that these three hybrid models achieved very good forecast performance compared with random forests and XGBoost. The GCAOA-ANN (swarm size of 20 and lag2) achieves the best forecast performance among the hybrid algorithms across different statistical fitness measures with a coefficient of determination, Nash-Sutcliffe coefficient, and root mean squared error of 0.972, 0.969, and 1.7354°C, respectively. The performance of the hybrid ANN models was further investigated under noise, and the results showed the superiority of the GCAOA-ANN model.
- Open Access
Rainwater Harvesting Site Assessment Using Geospatial Technologies in a Semi-Arid Region: Toward Water Sustainability
Rainwater harvesting for sustainable agriculture (RWHSA) offers a viable and eco-friendly strategy to alleviate water scarcity in semi-arid regions, particularly for agricultural use. This study aims to identify optimal sites for implementing RWH systems in northern Iraq to enhance water availability and promote sustainable farming practices. An integrated geospatial approach was adopted, combining Remote Sensing (RS), Geographic Information Systems (GIS), and Multi-Criteria Decision Analysis (MCDA). Key thematic layers, including soil type, land use/land cover, slope, and drainage density were processed in a GIS environment to model runoff potential. The Soil Conservation Service Curve Number (SCS-CN) method was used to estimate surface runoff. Criteria were weighted using the Analytical Hierarchy Process (AHP), enabling a structured and consistent evaluation of site suitability. The resulting suitability map classifies the region into four categories: very high suitability (10.2%), high (26.6%), moderate (40.4%), and low (22.8%). The integration of RS, GIS, AHP, and MCDA proved effective for strategic RWH site selection, supporting cost-efficient, sustainable, and data-driven agricultural planning in water-stressed environments.
Open AccessRainwater Harvesting Site Assessment Using Geospatial Technologies in a Semi-Arid Region: Toward Water Sustainability
Rainwater harvesting for sustainable agriculture (RWHSA) offers a viable and eco-friendly strategy to alleviate water scarcity in semi-arid regions, particularly for agricultural use. This study aims to identify optimal sites for implementing RWH systems in northern Iraq to enhance water availability and promote sustainable farming practices. An integrated geospatial approach was adopted, combining Remote Sensing (RS), Geographic Information Systems (GIS), and Multi-Criteria Decision Analysis (MCDA). Key thematic layers, including soil type, land use/land cover, slope, and drainage density were processed in a GIS environment to model runoff potential. The Soil Conservation Service Curve Number (SCS-CN) method was used to estimate surface runoff. Criteria were weighted using the Analytical Hierarchy Process (AHP), enabling a structured and consistent evaluation of site suitability. The resulting suitability map classifies the region into four categories: very high suitability (10.2%), high (26.6%), moderate (40.4%), and low (22.8%). The integration of RS, GIS, AHP, and MCDA proved effective for strategic RWH site selection, supporting cost-efficient, sustainable, and data-driven agricultural planning in water-stressed environments.
- Open Access
- 20 June 2025
- Published by Iraq Natural History Research Center and Museum in Bulletin of The Iraq Natural History Museum
- Vol. 18 (3) , 739-763.
CLASSIFYING FLUVIAL LANDFORMS USING GEOSPATIAL MODELING IN AL-ASHAALI WATERSHED, IRAQI SOUTHERN DESERT
This study examines the Al-Ashaali drainage basin, a watershed in the southern Iraqi desert, which constitutes a hydro-geomorphological system within the lower valleys region according to Iraq's geomorphological classification. The study uses a digital elevation model to classify the landforms of the watershed. Landform maps from the Shuttle Radar Topography Mission (SRTM) were combined with topographic maps to understand the formation of landforms. Geospatial simulation models were developed to create a simplified geomorphological base map. The data was analyzed utilizing ArcGIS software, which included color mapping tools, topographic maps, as well as geological and hydrological maps. The study aims to enhance the interpretation and geomorphological analysis of the watershed's landform characteristics. The Dutch Geosciences Institute (ITC) geomorphological classification system was used to categorize the landforms. The results indicated that the valleys in the study area are significant terrain due to their desiccation during the Quaternary period and their current location in arid regions. They exhibit fluvial erosion and are associated with Al-Ashaali watershed and Abu Hadair watershed in its western and southwestern areas. Rijlat Al-Tuwaitha is characterised by "captivity elbow" and "wind gaps", due to the accelerated flow of one river. The erosion plain is affected by erosion factors, including river sedimentation, floodplains, river islands, and braided streams. Alluvial fans develop in regions with steep slopes and lowlands, while floodplains are created by sediments carried by valleys and streams from steep highlands. Braided streams undergo multiple cycles of deposition and erosion, and most flora in the region consists of pioneer species.
- 20 June 2025
- Published by Iraq Natural History Research Center and Museum in Bulletin of The Iraq Natural History Museum
- Vol. 18 (3) , 739-763.
Open AccessCLASSIFYING FLUVIAL LANDFORMS USING GEOSPATIAL MODELING IN AL-ASHAALI WATERSHED, IRAQI SOUTHERN DESERT
This study examines the Al-Ashaali drainage basin, a watershed in the southern Iraqi desert, which constitutes a hydro-geomorphological system within the lower valleys region according to Iraq's geomorphological classification. The study uses a digital elevation model to classify the landforms of the watershed. Landform maps from the Shuttle Radar Topography Mission (SRTM) were combined with topographic maps to understand the formation of landforms. Geospatial simulation models were developed to create a simplified geomorphological base map. The data was analyzed utilizing ArcGIS software, which included color mapping tools, topographic maps, as well as geological and hydrological maps. The study aims to enhance the interpretation and geomorphological analysis of the watershed's landform characteristics. The Dutch Geosciences Institute (ITC) geomorphological classification system was used to categorize the landforms. The results indicated that the valleys in the study area are significant terrain due to their desiccation during the Quaternary period and their current location in arid regions. They exhibit fluvial erosion and are associated with Al-Ashaali watershed and Abu Hadair watershed in its western and southwestern areas. Rijlat Al-Tuwaitha is characterised by "captivity elbow" and "wind gaps", due to the accelerated flow of one river. The erosion plain is affected by erosion factors, including river sedimentation, floodplains, river islands, and braided streams. Alluvial fans develop in regions with steep slopes and lowlands, while floodplains are created by sediments carried by valleys and streams from steep highlands. Braided streams undergo multiple cycles of deposition and erosion, and most flora in the region consists of pioneer species.
- Open Access
- 12 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5415
Evaluation of Personal Ecological Footprints for Climate Change Mitigation and Adaptation: A Case Study in the UK
Climate change is one of our most critical challenges, requiring urgent and comprehensive action across all levels of society. Individual actions and their roles in mitigating and adapting to climate change remain underexplored, despite global efforts. Under this context, this study was conducted to evaluate the ecological footprint of individuals for climate change mitigation. A structured online survey was designed and distributed through email lists, social media platforms, and community organisations to over 200 potential participants in the northwest of the UK. Due to the anonymous nature of the survey, only 83 individuals from diverse demographics completed the questionnaire. A carbon footprint calculator using conversion factors has been employed, based on energy consumption, travel, and material goods use. Participants are categorised into four groups based on their annual CO2 emissions, ranging from less than 2 tonnes to over 10 tonnes. Personalised recommendations provided by the calculator focus on practical strategies, including adopting renewable energy, minimising unnecessary consumption, and opting for sustainable transportation. Results showed that only 5.5% of participants who employed advanced technologies and smart home technologies, 1.8% were implementing water-saving practices and 65.4% preferred to use their own car over other modes of transportation. In addition, the study found that 67.3% of participants had no or only a very limited knowledge of renewable energy technologies, indicating a need for education and awareness campaigns. The findings also highlight the importance of addressing demographic differences in ecological footprints, as these variations can provide insights into tailored policy interventions. Overall, despite the study’s limited sample size, this research contributes to the growing body of evidence on the importance of individual action in combating climate change and provides actionable insights for policymakers and educators aiming to foster a more sustainable lifestyle. Future studies with larger samples are recommended to validate and expand upon these findings.
- 12 June 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (12) , 5415
Open AccessEvaluation of Personal Ecological Footprints for Climate Change Mitigation and Adaptation: A Case Study in the UK
Climate change is one of our most critical challenges, requiring urgent and comprehensive action across all levels of society. Individual actions and their roles in mitigating and adapting to climate change remain underexplored, despite global efforts. Under this context, this study was conducted to evaluate the ecological footprint of individuals for climate change mitigation. A structured online survey was designed and distributed through email lists, social media platforms, and community organisations to over 200 potential participants in the northwest of the UK. Due to the anonymous nature of the survey, only 83 individuals from diverse demographics completed the questionnaire. A carbon footprint calculator using conversion factors has been employed, based on energy consumption, travel, and material goods use. Participants are categorised into four groups based on their annual CO2 emissions, ranging from less than 2 tonnes to over 10 tonnes. Personalised recommendations provided by the calculator focus on practical strategies, including adopting renewable energy, minimising unnecessary consumption, and opting for sustainable transportation. Results showed that only 5.5% of participants who employed advanced technologies and smart home technologies, 1.8% were implementing water-saving practices and 65.4% preferred to use their own car over other modes of transportation. In addition, the study found that 67.3% of participants had no or only a very limited knowledge of renewable energy technologies, indicating a need for education and awareness campaigns. The findings also highlight the importance of addressing demographic differences in ecological footprints, as these variations can provide insights into tailored policy interventions. Overall, despite the study’s limited sample size, this research contributes to the growing body of evidence on the importance of individual action in combating climate change and provides actionable insights for policymakers and educators aiming to foster a more sustainable lifestyle. Future studies with larger samples are recommended to validate and expand upon these findings.
- Open Access
Forecasting Evaporation Trends Amid Climate Change for Sustainable Water Management in Semi-Arid Regions
Evapotranspiration plays a vital role in the design of irrigation systems, water resource management, and hydrological modeling, especially in arid and semi-arid regions. This study focuses on projecting evaporation rates using three machine learning models: a Support Vector Machine (SVM), Multi-Layer Perceptron (MLP), and Gaussian Process Regression (GPR), in combination with Principal Component Analysis (PCA) for dimensionality reduction. Meteorological data from 1980 to 2022, including the minimum and maximum temperatures, rainfall, and solar radiation, were used to train and test the models. Projections were made for Kirkuk Governorate by downscaling five global climate models under two climate scenarios: SSP2-4.5 and SSP5-8.5. These scenarios were used to predict future evaporation rates at a rainwater harvesting site for four future periods (P1, P2, P3, and P4) and compare them to the historical reference period (RP). The performance of the models was evaluated using three statistical metrics: Mean Absolute Error (MAE), Root Mean Squared Error (RMSE), and the regression coefficient (R2). Among the models, the MLP demonstrated superior predictive accuracy, with values of MAE = 0.02 mm, RMSE = 0.10 mm, and R2 = 0.95. The SVM model showed a slightly lower performance, with MAE = 0.21 mm, RMSE = 0.13 mm, and R2 = 0.92. The GPR model’s performance was comparable, yielding MAE = 0.22 mm, RMSE = 0.37 mm, and R2 = 0.91. The historical reference period (RP) showed an average evaporation rate of 1370.9 mm per year. Under the SSP2-4.5 scenario, evaporation is projected to increase by 57.2%, while under SSP5-8.5, the increase is projected to be 85.9%. Under the SSP2-4.5 scenario, the evaporation rate for period P1 (2031–2050) showed a slight increase of 1.61%, while for periods P2 (2051–2070) and P3 (2071–2090), the increases were smaller, at 1.89% and 1.93%, respectively. The highest increase occurred in P4 (2091–2100), with a rate of 2.68%, compared to an observed value increase of 1.33%. These findings suggest that climate change will significantly elevate evaporation rates in the region, emphasizing the need for adaptive water resource management strategies.
Open AccessForecasting Evaporation Trends Amid Climate Change for Sustainable Water Management in Semi-Arid Regions
Evapotranspiration plays a vital role in the design of irrigation systems, water resource management, and hydrological modeling, especially in arid and semi-arid regions. This study focuses on projecting evaporation rates using three machine learning models: a Support Vector Machine (SVM), Multi-Layer Perceptron (MLP), and Gaussian Process Regression (GPR), in combination with Principal Component Analysis (PCA) for dimensionality reduction. Meteorological data from 1980 to 2022, including the minimum and maximum temperatures, rainfall, and solar radiation, were used to train and test the models. Projections were made for Kirkuk Governorate by downscaling five global climate models under two climate scenarios: SSP2-4.5 and SSP5-8.5. These scenarios were used to predict future evaporation rates at a rainwater harvesting site for four future periods (P1, P2, P3, and P4) and compare them to the historical reference period (RP). The performance of the models was evaluated using three statistical metrics: Mean Absolute Error (MAE), Root Mean Squared Error (RMSE), and the regression coefficient (R2). Among the models, the MLP demonstrated superior predictive accuracy, with values of MAE = 0.02 mm, RMSE = 0.10 mm, and R2 = 0.95. The SVM model showed a slightly lower performance, with MAE = 0.21 mm, RMSE = 0.13 mm, and R2 = 0.92. The GPR model’s performance was comparable, yielding MAE = 0.22 mm, RMSE = 0.37 mm, and R2 = 0.91. The historical reference period (RP) showed an average evaporation rate of 1370.9 mm per year. Under the SSP2-4.5 scenario, evaporation is projected to increase by 57.2%, while under SSP5-8.5, the increase is projected to be 85.9%. Under the SSP2-4.5 scenario, the evaporation rate for period P1 (2031–2050) showed a slight increase of 1.61%, while for periods P2 (2051–2070) and P3 (2071–2090), the increases were smaller, at 1.89% and 1.93%, respectively. The highest increase occurred in P4 (2091–2100), with a rate of 2.68%, compared to an observed value increase of 1.33%. These findings suggest that climate change will significantly elevate evaporation rates in the region, emphasizing the need for adaptive water resource management strategies.
- Open Access
- 3 December 2024
- Published by Science Exploration Press in Journal of Building Design and Environment
- Vol. 3 (3) , 41278
Experimental study on the energy assessment of CombiSave device for hot water control
Every household uses an average of around 360 litres of water each day. About 21% of a typical gas consumption is attributed to heating the water for showers, baths, and hot water from the tap. An environmentally friendly, low-cost device called the CombiSave valve can be used to manage gas and water consumption and should be fitted to most combination boilers to automatically control the flow of water every time a hot tap is turned on. This allows the boiler to heat the water faster and only return the flow to normal once a usable temperature is reached. An experimental test was conducted in the exemplar modern house of Liverpool John Moores University in order to assess the amount of water, energy, and CO2 reduction for varying temperatures and flow rates. The test was carried out for a duration of 9 hours during the daytime between June and October. Although the test was conducted over relatively warm months when ambient water temperatures were higher compared to winter months, results showed that good savings could be achieved through this product. The best savings for gas consumption and hence CO2 reduction were achieved at high water pressure and low temperature setting (40 ℃) of 36% compared with the case without combiSave. While water consumption was reduced by 56% at full flow rate and 45 ℃. Further research is needed encompassing multiple occupied dwellings with different family sizes and testing these in extreme weather conditions to see if similar results would be reflected.
- 3 December 2024
- Published by Science Exploration Press in Journal of Building Design and Environment
- Vol. 3 (3) , 41278
Open AccessExperimental study on the energy assessment of CombiSave device for hot water control
Every household uses an average of around 360 litres of water each day. About 21% of a typical gas consumption is attributed to heating the water for showers, baths, and hot water from the tap. An environmentally friendly, low-cost device called the CombiSave valve can be used to manage gas and water consumption and should be fitted to most combination boilers to automatically control the flow of water every time a hot tap is turned on. This allows the boiler to heat the water faster and only return the flow to normal once a usable temperature is reached. An experimental test was conducted in the exemplar modern house of Liverpool John Moores University in order to assess the amount of water, energy, and CO2 reduction for varying temperatures and flow rates. The test was carried out for a duration of 9 hours during the daytime between June and October. Although the test was conducted over relatively warm months when ambient water temperatures were higher compared to winter months, results showed that good savings could be achieved through this product. The best savings for gas consumption and hence CO2 reduction were achieved at high water pressure and low temperature setting (40 ℃) of 36% compared with the case without combiSave. While water consumption was reduced by 56% at full flow rate and 45 ℃. Further research is needed encompassing multiple occupied dwellings with different family sizes and testing these in extreme weather conditions to see if similar results would be reflected.
- Open Access
- 24 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9714
Improving the Energy Efficiency of the Modular Buildings Drying Room: A Case Study of Construction Site Cabins
Due to the nature of construction work projects that must be executed outside regardless of the weather, and because it rains most of the time in the UK, the workforce will need dry clothing to work in the best conditions for their health and productivity. This study aims to identify the energy currently used in a drying room at the Everton site in Liverpool, based on which improvements will be made to optimise the drying system and garment hanging arrangement to reduce the energy bill and carbon (CO2) emissions to the environment. A thermal model using IESVE 2023 (Integrated Environmental Solutions Virtual Environment) software was developed to predict the energy consumption in the current intensive energy drying room to know the baseline energy use before implementing energy savings by constructing a test drying room composed of a heater to raise the temperature, an air circulation fan to circulate air in the room, and a dehumidifier to reduce humidity. Moisture content in the garments to dry was monitored hourly from the 25th of April to the 2nd of May for seven hours, and the results show that the best drying system in terms of energy consumption to adopt is the combination of a dehumidifier and an air mover, saving about 60%. However, adding a low-energy heater to that will still realise the same savings—58%—and the drying process will be faster in this case. Based on this fact, it can be concluded that the impact of low humidity, good air velocity, and high temperature have a great impact on reducing energy consumption, drying time, and carbon emissions.
- 24 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9714
Open AccessImproving the Energy Efficiency of the Modular Buildings Drying Room: A Case Study of Construction Site Cabins
Due to the nature of construction work projects that must be executed outside regardless of the weather, and because it rains most of the time in the UK, the workforce will need dry clothing to work in the best conditions for their health and productivity. This study aims to identify the energy currently used in a drying room at the Everton site in Liverpool, based on which improvements will be made to optimise the drying system and garment hanging arrangement to reduce the energy bill and carbon (CO2) emissions to the environment. A thermal model using IESVE 2023 (Integrated Environmental Solutions Virtual Environment) software was developed to predict the energy consumption in the current intensive energy drying room to know the baseline energy use before implementing energy savings by constructing a test drying room composed of a heater to raise the temperature, an air circulation fan to circulate air in the room, and a dehumidifier to reduce humidity. Moisture content in the garments to dry was monitored hourly from the 25th of April to the 2nd of May for seven hours, and the results show that the best drying system in terms of energy consumption to adopt is the combination of a dehumidifier and an air mover, saving about 60%. However, adding a low-energy heater to that will still realise the same savings—58%—and the drying process will be faster in this case. Based on this fact, it can be concluded that the impact of low humidity, good air velocity, and high temperature have a great impact on reducing energy consumption, drying time, and carbon emissions.