Sihem Ghoudelbourk
Sihem Ghoudelbourk has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Taher Azar
College of Computer and Information Sciences, Prince Sultan University, Riyadh, Saudi Arabia
4 shared publications - Sihem Ghoudelbourk
Electrical Department, University Badji Mokhtar of Annaba, Annaba 23000, Algeria
3 shared publications - Billel Meghni
Badji Mokhtar University of Annaba
2 shared publications A Saadoun
Department of Electrical Engineering, Badji Mokhtar University, Annaba, Algeria
1 shared publication- A. Omeiri
University Badji Mokhtar Annaba
1 shared publication - A. Oukaci
University Mentouri of Constantine, Constantine, Algeria
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (6) , 4198-4207
Improved power quality and reduced losses in DFIG-based WECS using third-order sliding mode control
The study presents a comparative analysis of two advanced high-order sliding mode control (HOSMC) strategies—super-twisting sliding mode control (STSMC) and third-order sliding mode control (TOSMC)—for enhancing the performance of doubly-fed induction generator (DFIG)-based wind energy conversion systems (WECS). The key goals are to maximize energy efficiency, minimize the total harmonic distortion (THD) in the stator current, and reduce electrical losses within the system. Both control strategies are integrated into a direct field-oriented control (DFOC) scheme using space vector modulation (SVM) to improve dynamic response and control accuracy. MATLAB/Simulink simulations show that TOSMC consistently outperforms STSMC in multiple performance aspects. TOSMC ensures better energy efficiency through precise tracking of active and reactive power references while mitigating transient oscillations (chattering effects).Furthermore, TOSMC significantly reduces harmonic distortion, achieving a THD of 0.21%, compared to 0.33% for STSMC, and surpasses conventional controllers, which exhibit a minimum recorded THD of approximately 0.46%. The mitigation of transient phenomena also contributes to reduced switching losses and ohmic heating, thereby enhancing the generator’s thermal stability and overall reliability.
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (6) , 4198-4207
Open AccessImproved power quality and reduced losses in DFIG-based WECS using third-order sliding mode control
The study presents a comparative analysis of two advanced high-order sliding mode control (HOSMC) strategies—super-twisting sliding mode control (STSMC) and third-order sliding mode control (TOSMC)—for enhancing the performance of doubly-fed induction generator (DFIG)-based wind energy conversion systems (WECS). The key goals are to maximize energy efficiency, minimize the total harmonic distortion (THD) in the stator current, and reduce electrical losses within the system. Both control strategies are integrated into a direct field-oriented control (DFOC) scheme using space vector modulation (SVM) to improve dynamic response and control accuracy. MATLAB/Simulink simulations show that TOSMC consistently outperforms STSMC in multiple performance aspects. TOSMC ensures better energy efficiency through precise tracking of active and reactive power references while mitigating transient oscillations (chattering effects).Furthermore, TOSMC significantly reduces harmonic distortion, achieving a THD of 0.21%, compared to 0.33% for STSMC, and surpasses conventional controllers, which exhibit a minimum recorded THD of approximately 0.46%. The mitigation of transient phenomena also contributes to reduced switching losses and ohmic heating, thereby enhancing the generator’s thermal stability and overall reliability.
- Open Access
- 2 May 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (3) , 1630-1638
Technical-economic performance of fuel cell integration in autonomous hybrid systems
Increasing energy demand and greenhouse gas emissions reinforce the importance of renewable resources in energy systems. This study evaluates the technical and economic viability of integrating a fuel cell (FC) in autonomous hybrid systems to supply a community in Algeria, with an average power of 6.91 kW and a daily energy requirement of 165.6 kWh. Four hybrid system configurations were compared using HOMER software: i) photovoltaic (PV) and batteries (BAT), ii) PV, BAT, and diesel generator (DG), iii) PV, BAT, and FC, and iv) PV, BAT, DG, and FC. The PV/BAT/DG/FC system was identified as the optimal configuration, balancing energy efficiency, reducing energy surpluses, reducing reliance on DG, and reducing CO2 emissions while maintaining competitive energy costs. These results demonstrate that the integration of FC can improve the sustainability and stability of autonomous hybrid energy systems.
- 2 May 2025
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 14 (3) , 1630-1638
Open AccessTechnical-economic performance of fuel cell integration in autonomous hybrid systems
Increasing energy demand and greenhouse gas emissions reinforce the importance of renewable resources in energy systems. This study evaluates the technical and economic viability of integrating a fuel cell (FC) in autonomous hybrid systems to supply a community in Algeria, with an average power of 6.91 kW and a daily energy requirement of 165.6 kWh. Four hybrid system configurations were compared using HOMER software: i) photovoltaic (PV) and batteries (BAT), ii) PV, BAT, and diesel generator (DG), iii) PV, BAT, and FC, and iv) PV, BAT, DG, and FC. The PV/BAT/DG/FC system was identified as the optimal configuration, balancing energy efficiency, reducing energy surpluses, reducing reliance on DG, and reducing CO2 emissions while maintaining competitive energy costs. These results demonstrate that the integration of FC can improve the sustainability and stability of autonomous hybrid energy systems.
- Open Access
- 13 November 2023
- Published by Qeios Ltd
Design of an intelligent controller for improving the solar system efficiency
Ensuring the optimal performance of photovoltaic systems necessitates the development of a maximum power point tracker MPPT aimed at extracting the utmost power from the photovoltaic array. This study delves into the efficacy of a fuzzy logic controller compared to conventional controllers designed for tracking the maximum power point. The simulation model, employed for this research work, is implemented using Matlab/Simulink. a detailed comparison between the classic Perturb and Observe P.O algorithm and an other intelligent based on the fuzzy algorithm is conducted to assess MPPT accuracy. The findings demonstrate that the proposed model is characterized by simplicity and the capability to simulate diverse operating conditions.
- 13 November 2023
- Published by Qeios Ltd
Open AccessDesign of an intelligent controller for improving the solar system efficiency
Ensuring the optimal performance of photovoltaic systems necessitates the development of a maximum power point tracker MPPT aimed at extracting the utmost power from the photovoltaic array. This study delves into the efficacy of a fuzzy logic controller compared to conventional controllers designed for tracking the maximum power point. The simulation model, employed for this research work, is implemented using Matlab/Simulink. a detailed comparison between the classic Perturb and Observe P.O algorithm and an other intelligent based on the fuzzy algorithm is conducted to assess MPPT accuracy. The findings demonstrate that the proposed model is characterized by simplicity and the capability to simulate diverse operating conditions.
- 30 April 2022
- Published by International Information and Engineering Technology Association in European Journal of Electrical Engineering
- Vol. 24 (2) , 67-76
A New Model to Predict the Global Solar Radiation GSR of Souk-Ahras City
The value of the global solar radiation GSR reaching the earth is very important because it is an essential variable for different applications. Unfortunately, solar radiation measurements are not available, most of the time, in developing countries because of the lack of measurement means. Moreover, these measurements are difficult to obtain under complicated weather conditions. Thus, solar radiation evaluation models are used. In this study, a new semi-empirical model for the estimation and prediction of the global solar radiation of Souk Ahras area in Algeria is proposed. The model developed is based on meteorological data such as daily hourly temperatures and average relative humidity required from several stations and databases, over a period of four years. The values of the regression coefficients a, b and c calculated are 0.0142, -10.6206 and 57.8367 respectively. To set the modal valid, we have applied it to 10 Algerian cities and we calculated the H/H0 ratio for each site from our model. They have been then compared with the values from the (CDER). We can conclude that our new model gives a good estimate of the average daily global solar radiation (H) for the studied regions (error between 2.49% and 8.93%) and can also be used elsewhere in areas with the same climatic conditions.
- 30 April 2022
- Published by International Information and Engineering Technology Association in European Journal of Electrical Engineering
- Vol. 24 (2) , 67-76
A New Model to Predict the Global Solar Radiation GSR of Souk-Ahras City
The value of the global solar radiation GSR reaching the earth is very important because it is an essential variable for different applications. Unfortunately, solar radiation measurements are not available, most of the time, in developing countries because of the lack of measurement means. Moreover, these measurements are difficult to obtain under complicated weather conditions. Thus, solar radiation evaluation models are used. In this study, a new semi-empirical model for the estimation and prediction of the global solar radiation of Souk Ahras area in Algeria is proposed. The model developed is based on meteorological data such as daily hourly temperatures and average relative humidity required from several stations and databases, over a period of four years. The values of the regression coefficients a, b and c calculated are 0.0142, -10.6206 and 57.8367 respectively. To set the modal valid, we have applied it to 10 Algerian cities and we calculated the H/H0 ratio for each site from our model. They have been then compared with the values from the (CDER). We can conclude that our new model gives a good estimate of the average daily global solar radiation (H) for the studied regions (error between 2.49% and 8.93%) and can also be used elsewhere in areas with the same climatic conditions.
- Open Access
- 23 October 2021
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 1 (4) , 428-439
A New Approach to Fault Detection in the Power Converter in Wind Turbine Conversion Systems
The detection of faults in a wind turbine chain is of prime importance in order to maintain safety, enhance reliability and improve economic performance. In addition, wind systems have to ensure a continuity of service for a considerable period of time in the event of an electrical fault in the network or a fault in one of the elements of the electromechanical conversion system. This paper presents a fault detection methodology of the power converter within a wind turbine chain, equipped with a Doubly-Fed Induction Generator (DFIG). A configurable, fast, and accurate scheme is developed, the basis of which is the reliable identification of the failed switch. The solution proposed in this work involves the deployment of a redundant arm in the event of a fault; the replacement arm is utilized while waiting for a maintenance or repair operation to be carried out. The approach developed in this paper provides continuity of service after the occurrence of a fault in the network system and fault detection time is reduced. The validity of the proposed identification methodology is assessed by means of simulation of the model of a wind turbine conversion system.
- 23 October 2021
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 1 (4) , 428-439
Open AccessA New Approach to Fault Detection in the Power Converter in Wind Turbine Conversion Systems
The detection of faults in a wind turbine chain is of prime importance in order to maintain safety, enhance reliability and improve economic performance. In addition, wind systems have to ensure a continuity of service for a considerable period of time in the event of an electrical fault in the network or a fault in one of the elements of the electromechanical conversion system. This paper presents a fault detection methodology of the power converter within a wind turbine chain, equipped with a Doubly-Fed Induction Generator (DFIG). A configurable, fast, and accurate scheme is developed, the basis of which is the reliable identification of the failed switch. The solution proposed in this work involves the deployment of a redundant arm in the event of a fault; the replacement arm is utilized while waiting for a maintenance or repair operation to be carried out. The approach developed in this paper provides continuity of service after the occurrence of a fault in the network system and fault detection time is reduced. The validity of the proposed identification methodology is assessed by means of simulation of the model of a wind turbine conversion system.
- Open Access
- 16 October 2019
- Published by MDPI AG in Mathematics
- Vol. 7 (10) , 984
Fractional Order Unknown Inputs Fuzzy Observer for Takagi–Sugeno Systems with Unmeasurable Premise Variables
This paper presents a new procedure for designing a fractional order unknown input observer (FOUIO) for nonlinear systems represented by a fractional-order Takagi–Sugeno (FOTS) model with unmeasurable premise variables (UPV). Most of the current research on fractional order systems considers models using measurable premise variables (MPV) and therefore cannot be utilized when premise variables are not measurable. The concept of the proposed is to model the FOTS with UPV into an uncertain FOTS model by presenting the estimated state in the model. First, the fractional-order extension of Lyapunov theory is used to investigate the convergence conditions of the FOUIO, and the linear matrix inequalities (LMIs) provide the stability condition. Secondly, performances of the proposed FOUIO are improved by the reduction of bounded external disturbances. Finally, an example is provided to clarify the proposed method. The obtained results show that a good convergence of the outputs and the state estimation errors were observed using the new proposed FOUIO.
- 16 October 2019
- Published by MDPI AG in Mathematics
- Vol. 7 (10) , 984
Open AccessFractional Order Unknown Inputs Fuzzy Observer for Takagi–Sugeno Systems with Unmeasurable Premise Variables
This paper presents a new procedure for designing a fractional order unknown input observer (FOUIO) for nonlinear systems represented by a fractional-order Takagi–Sugeno (FOTS) model with unmeasurable premise variables (UPV). Most of the current research on fractional order systems considers models using measurable premise variables (MPV) and therefore cannot be utilized when premise variables are not measurable. The concept of the proposed is to model the FOTS with UPV into an uncertain FOTS model by presenting the estimated state in the model. First, the fractional-order extension of Lyapunov theory is used to investigate the convergence conditions of the FOUIO, and the linear matrix inequalities (LMIs) provide the stability condition. Secondly, performances of the proposed FOUIO are improved by the reduction of bounded external disturbances. Finally, an example is provided to clarify the proposed method. The obtained results show that a good convergence of the outputs and the state estimation errors were observed using the new proposed FOUIO.
- 1 January 2018
- Published by Inderscience Publishers in International Journal of Advanced Intelligence Paradigms
- Vol. 10 (1) , 1
Fuzzy Fault-Tolerant Control for doubly fed induction generator in wind energy conversion system
- 1 January 2018
- Published by Inderscience Publishers in International Journal of Advanced Intelligence Paradigms
- Vol. 10 (1) , 1
Fuzzy Fault-Tolerant Control for doubly fed induction generator in wind energy conversion system
- 1 January 2017
- Published by AIP Publishing
Influence of the external and internal parameters on the characteristics of generator PV
The growing demand for electric power and inevitable future depletion of conventional sources require major research on the alternative sources, like renewable energies. Among which, solar energy is the most largely used because of its many applications. And as Algeria comprises an exceptional solar layer thanks to its large surfaces, therefore it represents an important source of photovoltaic energy. The objective of this work is to be ensured that the energy produced by the photovoltaic plant supplies the electrical distribution network. The configuration of this system comprises a photovoltaic generator, connected to a chopper booster. For an optimal operation of the system, one must connect in cascades partial generators each one connected to a chopper booster adapted by an order MPPT by the method of Disturbance and Observation (P&O) to ensure the operation of their maximum powers whatever the climatic conditions, and also allows to raise the output voltage of these photovoltaic generators. The adaptation between the photovoltaic generator and the load was carried out with the help of converter DC/DC.
- 1 January 2017
- Published by AIP Publishing
Influence of the external and internal parameters on the characteristics of generator PV
The growing demand for electric power and inevitable future depletion of conventional sources require major research on the alternative sources, like renewable energies. Among which, solar energy is the most largely used because of its many applications. And as Algeria comprises an exceptional solar layer thanks to its large surfaces, therefore it represents an important source of photovoltaic energy. The objective of this work is to be ensured that the energy produced by the photovoltaic plant supplies the electrical distribution network. The configuration of this system comprises a photovoltaic generator, connected to a chopper booster. For an optimal operation of the system, one must connect in cascades partial generators each one connected to a chopper booster adapted by an order MPPT by the method of Disturbance and Observation (P&O) to ensure the operation of their maximum powers whatever the climatic conditions, and also allows to raise the output voltage of these photovoltaic generators. The adaptation between the photovoltaic generator and the load was carried out with the help of converter DC/DC.
- 10 June 2016
- Published by Springer Nature in Electrical Engineering
- Vol. 99 (1) , 33-45
Comparison performance between sliding mode control and nonlinear control, application to induction motor
- 10 June 2016
- Published by Springer Nature in Electrical Engineering
- Vol. 99 (1) , 33-45
Comparison performance between sliding mode control and nonlinear control, application to induction motor
- 31 January 2016
- Published by SAGE Publications in Wind Engineering
- Vol. 40 (2) , 115-133
Effective supervisory controllers designed for optimal energy management in permanent magnet synchronous generator wind turbine with battery storage
Optimal control of large-scale wind turbine has become a critical issue for the development of renewable energy systems and their integration into the power grid to provide reliable, secure, and efficient electricity. In this article, a new supervisory control system for the optimal management and robust operation of a wind turbine generator and a battery energy storage system is presented. The proposed coordinated controller can mitigate both active and reactive power disturbances due to the intermittency of wind speed and load change. Moreover, the control strategy ensures the maximum power extraction capability of direct-drive wind turbine. This supervisory controller is made up of three subsystems. The first one is used to track the maximum power point for variable wind speeds; the control algorithm employs a fuzzy logic controller and a second-order sliding mode controller to effectively meet this target. The task of the second one is to maintain the required DC-link voltage level. This is achieved by controlling the bidirectional power flow in the storage batteries using DC–DC converter. Whereas in the last, a second-order sliding mode controller is investigated to achieve smooth regulation of grid active and reactive power quantities, which provides better results in terms of attenuation of the harmonics present in the grid courant compared with the conventional first-order sliding mode controller. Extensive simulation studies under different conditions of wind speed are carried out in MATLAB/Simulink, and the results confirm the effectiveness of the new supervisory control system.
- 31 January 2016
- Published by SAGE Publications in Wind Engineering
- Vol. 40 (2) , 115-133
Effective supervisory controllers designed for optimal energy management in permanent magnet synchronous generator wind turbine with battery storage
Optimal control of large-scale wind turbine has become a critical issue for the development of renewable energy systems and their integration into the power grid to provide reliable, secure, and efficient electricity. In this article, a new supervisory control system for the optimal management and robust operation of a wind turbine generator and a battery energy storage system is presented. The proposed coordinated controller can mitigate both active and reactive power disturbances due to the intermittency of wind speed and load change. Moreover, the control strategy ensures the maximum power extraction capability of direct-drive wind turbine. This supervisory controller is made up of three subsystems. The first one is used to track the maximum power point for variable wind speeds; the control algorithm employs a fuzzy logic controller and a second-order sliding mode controller to effectively meet this target. The task of the second one is to maintain the required DC-link voltage level. This is achieved by controlling the bidirectional power flow in the storage batteries using DC–DC converter. Whereas in the last, a second-order sliding mode controller is investigated to achieve smooth regulation of grid active and reactive power quantities, which provides better results in terms of attenuation of the harmonics present in the grid courant compared with the conventional first-order sliding mode controller. Extensive simulation studies under different conditions of wind speed are carried out in MATLAB/Simulink, and the results confirm the effectiveness of the new supervisory control system.