Luc Knockaert
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Luc Knockaert has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Tom Dhaene
Department of Information Technology, Ghent University¿IBBT, Ghent, Belgium
7 shared publications - Francesco Ferranti
Ghent University - iMinds
6 shared publications - Giulio Antonini
Università degli Studi dell’Aquila
4 shared publications - Elizabeth Rita Samuel
Rajagiri School of Engineering and Technology Kanayannur
2 shared publications - Daniel De Zutter
Ghent University/IMEC
1 shared publication - Domenico Spina
ELEC Department, Vrije Universiteit Brussel, Brussel, Belgium
1 shared publication
Latest Publications
- 7 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 62 (3) , 276-280
Matrix-Interpolation-Based Parametric Model Order Reduction for Multiconductor Transmission Lines With Delays
A novel parametric model order reduction technique based on matrix interpolation for multiconductor transmission lines (MTLs) with delays having design parameter variations is proposed in this brief. Matrix interpolation overcomes the oversize problem caused by input-output system-level interpolation-based parametric macromodels. The reduced state-space matrices are obtained using a higher-order Krylov subspace-based model order reduction technique, which is more efficient in comparison to the Gramian-based parametric modeling in which the projection matrix is computed using a Cholesky factorization. The design space is divided into cells, and then the Krylov subspaces computed for each cell are merged and then truncated using an adaptive truncation algorithm with respect to their singular values to obtain a compact common projection matrix. The resulting reduced-order state-space matrices and the delays are interpolated using positive interpolation schemes, making it computationally cheap and accurate for repeated system evaluations under different design parameter settings. The proposed technique is successfully applied to RLC (R-resistor, L-inductor, C-capacitance) and MTL circuits with delays.
- 7 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 62 (3) , 276-280
Matrix-Interpolation-Based Parametric Model Order Reduction for Multiconductor Transmission Lines With Delays
A novel parametric model order reduction technique based on matrix interpolation for multiconductor transmission lines (MTLs) with delays having design parameter variations is proposed in this brief. Matrix interpolation overcomes the oversize problem caused by input-output system-level interpolation-based parametric macromodels. The reduced state-space matrices are obtained using a higher-order Krylov subspace-based model order reduction technique, which is more efficient in comparison to the Gramian-based parametric modeling in which the projection matrix is computed using a Cholesky factorization. The design space is divided into cells, and then the Krylov subspaces computed for each cell are merged and then truncated using an adaptive truncation algorithm with respect to their singular values to obtain a compact common projection matrix. The resulting reduced-order state-space matrices and the delays are interpolated using positive interpolation schemes, making it computationally cheap and accurate for repeated system evaluations under different design parameter settings. The proposed technique is successfully applied to RLC (R-resistor, L-inductor, C-capacitance) and MTL circuits with delays.
- 5 November 2014
- Published by Springer Nature
- p. 311-327
Passive Parametric Macromodeling by Using Sylvester State-Space Realizations
- 5 November 2014
- Published by Springer Nature
- p. 311-327
Passive Parametric Macromodeling by Using Sylvester State-Space Realizations
- 9 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 4 (6) , 1038-1051
Efficient Variability Analysis of Electromagnetic Systems Via Polynomial Chaos and Model Order Reduction
We present a novel technique to perform the model-order reduction (MOR) of multiport systems under the effect of statistical variability of geometrical or electrical parameters. The proposed approach combines a deterministic MOR phase with the use of the Polynomial Chaos (PC) expansion to perform the variability analysis of the system under study very efficiently. The combination of MOR and PC techniques generates a final reduced-order model able to accurately perform stochastic computations and variability analysis. The novel proposed method guarantees a high-degree of flexibility, since different MOR schemes can be used and different types of modern electrical systems (e.g., filters and connectors) can be modeled. The accuracy and efficiency of the proposed approach is verified by means of two numerical examples and compared with other existing variability analysis techniques.
- 9 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 4 (6) , 1038-1051
Efficient Variability Analysis of Electromagnetic Systems Via Polynomial Chaos and Model Order Reduction
We present a novel technique to perform the model-order reduction (MOR) of multiport systems under the effect of statistical variability of geometrical or electrical parameters. The proposed approach combines a deterministic MOR phase with the use of the Polynomial Chaos (PC) expansion to perform the variability analysis of the system under study very efficiently. The combination of MOR and PC techniques generates a final reduced-order model able to accurately perform stochastic computations and variability analysis. The novel proposed method guarantees a high-degree of flexibility, since different MOR schemes can be used and different types of modern electrical systems (e.g., filters and connectors) can be modeled. The accuracy and efficiency of the proposed approach is verified by means of two numerical examples and compared with other existing variability analysis techniques.
- 18 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 2 (12) , 2080-2088
Compact and Passive Parametric Macromodeling Using Reference Macromodels and Positive Interpolation Operators
We present an enhanced parametric macromodeling method that is able to generate compact and passive models over the entire design space of interest. It starts from a discrete set of data samples of the input-output system behavior (e.g., admittance, impedance, and scattering parameters), which depend on multiple design variables such as layout and substrate parameters. The proposed approach generates accurate parametric macromodels whose size is not affected by the number of design parameters in addition to frequency. Stability and passivity are preserved over the design space of interest. Pertinent numerical results validate the proposed parametric macromodeling methods.
- 18 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 2 (12) , 2080-2088
Compact and Passive Parametric Macromodeling Using Reference Macromodels and Positive Interpolation Operators
We present an enhanced parametric macromodeling method that is able to generate compact and passive models over the entire design space of interest. It starts from a discrete set of data samples of the input-output system behavior (e.g., admittance, impedance, and scattering parameters), which depend on multiple design variables such as layout and substrate parameters. The proposed approach generates accurate parametric macromodels whose size is not affected by the number of design parameters in addition to frequency. Stability and passivity are preserved over the design space of interest. Pertinent numerical results validate the proposed parametric macromodeling methods.
- 20 January 2012
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 25 (4) , 347-361
Gradient-based optimization using parametric sensitivity macromodels
- 20 January 2012
- Published by Wiley in International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
- Vol. 25 (4) , 347-361
Gradient-based optimization using parametric sensitivity macromodels
- 28 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 58 (12) , 3688-3696
Passivity-Preserving Parametric Macromodeling for Highly Dynamic Tabulated Data Based on Lur'e Equations
We present a new method for the construction of parametric macromodels for admittance and impedance input- output representations starting from multivariate data samples that depend on frequency and additional design variables such as geometric and material parameters. Poles and residues are parameterized indirectly, while stability and passivity of the parametric macromodel are guaranteed over a user defined range of design parameter values. Pertinent numerical examples validate the proposed parametric macromodeling approach.
- 28 October 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 58 (12) , 3688-3696
Passivity-Preserving Parametric Macromodeling for Highly Dynamic Tabulated Data Based on Lur'e Equations
We present a new method for the construction of parametric macromodels for admittance and impedance input- output representations starting from multivariate data samples that depend on frequency and additional design variables such as geometric and material parameters. Poles and residues are parameterized indirectly, while stability and passivity of the parametric macromodel are guaranteed over a user defined range of design parameter values. Pertinent numerical examples validate the proposed parametric macromodeling approach.
- 16 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 52 (4) , 974-984
Guaranteed Passive Parameterized Model Order Reduction of the Partial Element Equivalent Circuit (PEEC) Method
The decrease of IC feature size and the increase of operating frequencies require 3-D electromagnetic methods, such as the partial element equivalent circuit (PEEC) method, for the analysis and design of high-speed circuits. Very large systems of equations are often produced by 3-D electromagnetic methods. During the circuit synthesis of large-scale digital or analog applications, it is important to predict the response of the system under study as a function of design parameters, such as geometrical and substrate features, in addition to frequency (or time). Parameterized model order reduction (PMOR) methods become necessary to reduce large systems of equations with respect to frequency and other design parameters. We propose an innovative PMOR technique applicable to PEEC analysis, which combines traditional passivity-preserving model order reduction methods and positive interpolation schemes. It is able to provide parametric reduced-order models, stable, and passive by construction over a user-defined range of design parameter values. Numerical examples validate the proposed approach.
- 16 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 52 (4) , 974-984
Guaranteed Passive Parameterized Model Order Reduction of the Partial Element Equivalent Circuit (PEEC) Method
The decrease of IC feature size and the increase of operating frequencies require 3-D electromagnetic methods, such as the partial element equivalent circuit (PEEC) method, for the analysis and design of high-speed circuits. Very large systems of equations are often produced by 3-D electromagnetic methods. During the circuit synthesis of large-scale digital or analog applications, it is important to predict the response of the system under study as a function of design parameters, such as geometrical and substrate features, in addition to frequency (or time). Parameterized model order reduction (PMOR) methods become necessary to reduce large systems of equations with respect to frequency and other design parameters. We propose an innovative PMOR technique applicable to PEEC analysis, which combines traditional passivity-preserving model order reduction methods and positive interpolation schemes. It is able to provide parametric reduced-order models, stable, and passive by construction over a user-defined range of design parameter values. Numerical examples validate the proposed approach.
- 7 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 20 (10) , 533-535
Parametric Macromodeling for Tabulated Data Based on Internal Passivity
We present a new parametric macromodeling technique for admittance and impedance input-output representations parameterized by design variables such as geometric and material parameters. Stability and passivity of the parametric macromodel are guaranteed over a user defined range of design parameter values, while poles and residues are parameterized indirectly. Numerical results validate the proposed parametric macromodeling approach.
- 7 September 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 20 (10) , 533-535
Parametric Macromodeling for Tabulated Data Based on Internal Passivity
We present a new parametric macromodeling technique for admittance and impedance input-output representations parameterized by design variables such as geometric and material parameters. Stability and passivity of the parametric macromodel are guaranteed over a user defined range of design parameter values, while poles and residues are parameterized indirectly. Numerical results validate the proposed parametric macromodeling approach.