Dorith Tavor
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dorith Tavor has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Adi Wolfson
Department of Chemical Engineering, Shamoon College of Engineering, Basel/Bialik Sts., Be’er Sheva 84100, Israel
10 shared publications Patrick M. Martin
Sami Shamoon College of Engineering
6 shared publications- Shlomo Mark
Software engineering department, Sami Shamoon College of Engineering, Beersheba, Israel, Israel
6 shared publications - Amit Kenny
Department of Civil Engineering, Shamoon College of Engineering, Ashdod 7724501, Israel
2 shared publications Christina Dlugy
2 shared publications- Aleksandra Gerkerova
Education Department, Ariel University, Ariel 4070000, Israel
1 shared publication
Latest Publications
- Open Access
- 17 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (22) , 12191
Dynamic and Quasi-Static Loading Behavior of Low-Strength Concrete Incorporating Rubber Aggregates and Polymer Fiber
This study evaluates low-strength concrete incorporating recycled rubber aggregates from waste tires and polymer fiber for use as “forgiving” safety barriers that enhance road safety while promoting environmental sustainability. Incorporating the rubber and fiber enables recycling the tires close to the source where they were originally used—the road. These barriers are designed to absorb collision energy, reduce vehicle deceleration, and minimize the severity of accidents. The key requirements for such concrete are low strength, low elastic modulus, high ductility, high toughness, and minimal dispersion of large fragments upon failure. The study investigated various concretes containing different percentages of recycled rubber (0–20% by volume) and polymer fibers (0–1.2% by volume). We conducted compression, flexural, and dynamic impact tests to assess the effects of these additions on the properties of the concrete. Dynamic tests were carried out in a cantilever loading scheme with strain rates of 2.5–3 s−1, to emulate barrier loading during car crush. Key findings include indications that recycled rubber decreases concrete strength, while its contribution to energy absorption is limited. In contrast, polymer fibers enhance the concrete’s elongation and toughness, increasing energy absorption. The quantity of fibers present in the fracture area is critical for energy absorption. Notably, energy absorption under dynamic loads is more significant than that under quasi-static loads; however, the difference between these results diminishes as the fiber percentage increases. Furthermore, quasi-static tests on fiber-reinforced concrete can effectively evaluate its response to impact loads. In conclusion, the combined use of recycled rubber and polymer fibers in low-strength concrete offers a sustainable solution for developing safer and more environmentally responsible roadside infrastructure by repurposing waste materials and reducing the ecological footprint of construction. Careful attention should be paid to the distribution of fibers within the concrete, as this significantly influences energy absorption.
- 17 November 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (22) , 12191
Open AccessDynamic and Quasi-Static Loading Behavior of Low-Strength Concrete Incorporating Rubber Aggregates and Polymer Fiber
This study evaluates low-strength concrete incorporating recycled rubber aggregates from waste tires and polymer fiber for use as “forgiving” safety barriers that enhance road safety while promoting environmental sustainability. Incorporating the rubber and fiber enables recycling the tires close to the source where they were originally used—the road. These barriers are designed to absorb collision energy, reduce vehicle deceleration, and minimize the severity of accidents. The key requirements for such concrete are low strength, low elastic modulus, high ductility, high toughness, and minimal dispersion of large fragments upon failure. The study investigated various concretes containing different percentages of recycled rubber (0–20% by volume) and polymer fibers (0–1.2% by volume). We conducted compression, flexural, and dynamic impact tests to assess the effects of these additions on the properties of the concrete. Dynamic tests were carried out in a cantilever loading scheme with strain rates of 2.5–3 s−1, to emulate barrier loading during car crush. Key findings include indications that recycled rubber decreases concrete strength, while its contribution to energy absorption is limited. In contrast, polymer fibers enhance the concrete’s elongation and toughness, increasing energy absorption. The quantity of fibers present in the fracture area is critical for energy absorption. Notably, energy absorption under dynamic loads is more significant than that under quasi-static loads; however, the difference between these results diminishes as the fiber percentage increases. Furthermore, quasi-static tests on fiber-reinforced concrete can effectively evaluate its response to impact loads. In conclusion, the combined use of recycled rubber and polymer fibers in low-strength concrete offers a sustainable solution for developing safer and more environmentally responsible roadside infrastructure by repurposing waste materials and reducing the ecological footprint of construction. Careful attention should be paid to the distribution of fibers within the concrete, as this significantly influences energy absorption.
- Open Access
- 17 March 2025
- Published by MDPI AG in Preprints.org
Dynamic and Quasi-Static Loading Behavior of Low-Strength Concrete Incorporating Rubber Aggregates and Polymer Fiber
This study evaluates low-strength concrete with rubber and polymer fiber for "forgiving" safety barriers. These barriers should absorb collision energy, reduce vehicle deceleration, and minimize accident severity. Key requirements for such concrete are: low strength, low elastic modulus, high ductility, high toughness, and minimal dispersion of large fragments upon failure. The study examined various concrete mixes with varying percentages of recycled rubber (0-20% by volume) and polymer fibers (0-1.2% by volume). Compression, flexural, and dynamic impact tests were performed to assess the additions' effect on the concrete properties. Key findings include: Recycled rubber reduces concrete strength with a low contribution to energy absorption. Polymer fibers improve concrete's elongation and toughness, increasing overall energy absorption. The number of fibers in the fracture area is crucial to energy absorption. Energy absorption under dynamic load is higher than under quasi-static load. However, as the percentage of fibers increases, the results become more similar. Quasi-static tests of fiber-reinforced concrete can be used to assess its behavior under impact loads. In conclusion, combining recycled rubber and polymer fibers in low-strength concrete can be used to produce "forgiving" safety barriers. Attention should be paid to the distribution of fibers in the concrete, as it significantly impacts energy absorption.
- 17 March 2025
- Published by MDPI AG in Preprints.org
Open AccessDynamic and Quasi-Static Loading Behavior of Low-Strength Concrete Incorporating Rubber Aggregates and Polymer Fiber
This study evaluates low-strength concrete with rubber and polymer fiber for "forgiving" safety barriers. These barriers should absorb collision energy, reduce vehicle deceleration, and minimize accident severity. Key requirements for such concrete are: low strength, low elastic modulus, high ductility, high toughness, and minimal dispersion of large fragments upon failure. The study examined various concrete mixes with varying percentages of recycled rubber (0-20% by volume) and polymer fibers (0-1.2% by volume). Compression, flexural, and dynamic impact tests were performed to assess the additions' effect on the concrete properties. Key findings include: Recycled rubber reduces concrete strength with a low contribution to energy absorption. Polymer fibers improve concrete's elongation and toughness, increasing overall energy absorption. The number of fibers in the fracture area is crucial to energy absorption. Energy absorption under dynamic load is higher than under quasi-static load. However, as the percentage of fibers increases, the results become more similar. Quasi-static tests of fiber-reinforced concrete can be used to assess its behavior under impact loads. In conclusion, combining recycled rubber and polymer fibers in low-strength concrete can be used to produce "forgiving" safety barriers. Attention should be paid to the distribution of fibers in the concrete, as it significantly impacts energy absorption.
- Open Access
- 14 June 2024
- Published by MDPI AG in Education Sciences
- Vol. 14 (6) , 644
PhDs of International Students—The Case of Israeli PhDs
Pursuing academic studies in foreign countries is a globally prevalent phenomenon for diverse reasons: earning a degree in high-demand subjects from a prestigious university opens more doors than a diploma earned locally. Earning a degree overseas is an opportunity to expand one’s horizons and gain new experiences and exposure to other cultures. In addition, other personal and/or academic reasons that prevent students from pursuing a degree in their home country, such as age, admission requirements, and difficulty in finding an appropriate supervisor, motivate them to choose a degree program in a foreign country. The current study examines the motives of PhD degree holders who are Israeli residents who completed their doctorate studies overseas and explores the aspirations they hope to achieve through such studies. The study examines several aspects of the profiles of PhD holders who chose to study overseas, including demographic, socioeconomic, academic, financial, and professional, as well as their aims. The study sample comprised 153 PhD holders who earned their PhD degree in the field of education overseas and applied to the Israeli Ministry of Education for accreditation of their degree. The sample focuses on PhD holders in the social sciences and humanities, specifically in education. The study was conducted using the quantitative method and is based on a survey. The findings of the study offer insights into decision makers in higher education in Israel and their efforts to assess the value of the degrees presented for accreditation by PhD holders who earned their degrees overseas.
- 14 June 2024
- Published by MDPI AG in Education Sciences
- Vol. 14 (6) , 644
Open AccessPhDs of International Students—The Case of Israeli PhDs
Pursuing academic studies in foreign countries is a globally prevalent phenomenon for diverse reasons: earning a degree in high-demand subjects from a prestigious university opens more doors than a diploma earned locally. Earning a degree overseas is an opportunity to expand one’s horizons and gain new experiences and exposure to other cultures. In addition, other personal and/or academic reasons that prevent students from pursuing a degree in their home country, such as age, admission requirements, and difficulty in finding an appropriate supervisor, motivate them to choose a degree program in a foreign country. The current study examines the motives of PhD degree holders who are Israeli residents who completed their doctorate studies overseas and explores the aspirations they hope to achieve through such studies. The study examines several aspects of the profiles of PhD holders who chose to study overseas, including demographic, socioeconomic, academic, financial, and professional, as well as their aims. The study sample comprised 153 PhD holders who earned their PhD degree in the field of education overseas and applied to the Israeli Ministry of Education for accreditation of their degree. The sample focuses on PhD holders in the social sciences and humanities, specifically in education. The study was conducted using the quantitative method and is based on a survey. The findings of the study offer insights into decision makers in higher education in Israel and their efforts to assess the value of the degrees presented for accreditation by PhD holders who earned their degrees overseas.
- Open Access
- 11 June 2020
- Published by MDPI AG in Micromachines
- Vol. 11 (6) , 584
Improved Atomization via a Mechanical Atomizer with Optimal Geometric Parameters and an Air-Assisted Component
Atomization of liquid media is a key aim in various technological disciplines, and solutions that improve spray performance, while decreasing energy consumption, are in great demand. That concept is very important in the development of liquid fuel spray atomizers in high-efficiency microturbines and other generator systems with low inlet pressure and a wide range of power supply. Here we present a study of the liquid atomization characteristics for a new mechanical atomizer that has optimal geometric parameters and a preliminary swirl stage. In our air-assisted atomizer, air is introduced through a swirl chamber positioned at the exit of the mechanical atomizer. The optimized mechanical atomizer alone can achieve D32 drop diameters in the range of 80 to 40 µm at water supply pressures of 2 to 5 bar, respectively. The addition of an air swirl chamber substantially decreases drop sizes. At an air–liquid ratio (ALR) equal to 1, water pressures of 2.5 to 3 bar and air supply pressures 0.35 to 1 bar, D32 drops with diameters of 20–30 µm were obtained. In an air-assisted atomizer the parameters of the mechanical atomizer have a much stronger influence on drop diameters than do characteristics of the air-swirl chamber. Using a mechanical atomizer with optimal geometrical dimensions allows limiting the liquid supply pressure to 5 bar; but when an air-assisted component is introduced we can recommend an ALR ≈ 1 and an air supply pressure of up to 1 bar.
- 11 June 2020
- Published by MDPI AG in Micromachines
- Vol. 11 (6) , 584
Open AccessImproved Atomization via a Mechanical Atomizer with Optimal Geometric Parameters and an Air-Assisted Component
Atomization of liquid media is a key aim in various technological disciplines, and solutions that improve spray performance, while decreasing energy consumption, are in great demand. That concept is very important in the development of liquid fuel spray atomizers in high-efficiency microturbines and other generator systems with low inlet pressure and a wide range of power supply. Here we present a study of the liquid atomization characteristics for a new mechanical atomizer that has optimal geometric parameters and a preliminary swirl stage. In our air-assisted atomizer, air is introduced through a swirl chamber positioned at the exit of the mechanical atomizer. The optimized mechanical atomizer alone can achieve D32 drop diameters in the range of 80 to 40 µm at water supply pressures of 2 to 5 bar, respectively. The addition of an air swirl chamber substantially decreases drop sizes. At an air–liquid ratio (ALR) equal to 1, water pressures of 2.5 to 3 bar and air supply pressures 0.35 to 1 bar, D32 drops with diameters of 20–30 µm were obtained. In an air-assisted atomizer the parameters of the mechanical atomizer have a much stronger influence on drop diameters than do characteristics of the air-swirl chamber. Using a mechanical atomizer with optimal geometrical dimensions allows limiting the liquid supply pressure to 5 bar; but when an air-assisted component is introduced we can recommend an ALR ≈ 1 and an air supply pressure of up to 1 bar.
- 7 March 2019
- Published by Wiley in Chemical Engineering & Technology
- Vol. 42 (5) , 1127-1134
Generation of Coarse Bubbles and Flow Instability Control by Means of a Bubble Generator
- 7 March 2019
- Published by Wiley in Chemical Engineering & Technology
- Vol. 42 (5) , 1127-1134
Generation of Coarse Bubbles and Flow Instability Control by Means of a Bubble Generator
- Open Access
- 1 January 2017
- Published by Open Access Text Pvt, Ltd. in Integrative Food, Nutrition and Metabolism
- Vol. 4 (3)
Chia seeds are richer in polyphenols compared to flax seeds
OA Text is an independent open-access scientific publisher showcases innovative research and ideas aimed at improving health by linking research and practice to the benefit of society.
- 1 January 2017
- Published by Open Access Text Pvt, Ltd. in Integrative Food, Nutrition and Metabolism
- Vol. 4 (3)
Open AccessChia seeds are richer in polyphenols compared to flax seeds
OA Text is an independent open-access scientific publisher showcases innovative research and ideas aimed at improving health by linking research and practice to the benefit of society.
- 11 November 2014
- Published by Springer Nature
- p. 59-72
Examples
- 11 November 2014
- Published by Springer Nature
- p. 49-58
Assessing Sustainable Services