BGBhaskar Goel

Bhaskar Goel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Bhaskar Goel has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Innovations in textile wastewater management: a review of zero liquid discharge technology

    by Ashok Pundir, Mohindra Singh Thakur, Radha, Bhaskar Goel, Suraj Prakash, Neeraj Kumari, Niharika Sharma, Ettiyagounder Parameswari, Marisennayya Senapathy, Sunil Kumar, et al.

    Zero liquid discharge (ZLD) technology emerges as a transformative solution for sustainable wastewater management in the textile industry, emphasizing water recycling and discharge minimization. This review comprehensively explores ZLD’s pivotal role in reshaping wastewater management practices within the textile sector. With a primary focus on water recycling and minimized discharge, the review thoroughly examines the economic and environmental dimensions of ZLD. Additionally, it includes a comparative cost analysis against conventional wastewater treatment methods and offers a comprehensive outlook on the global ZLD market. Presently valued at US $0.71 billion, the market is anticipated to reach US $1.76 billion by 2026, reflecting a robust annual growth rate of 12.6%. Despite ZLD’s efficiency in wastewater recovery, environmental challenges, such as heightened greenhouse gas emissions, increased carbon footprint, elevated energy consumption, and chemical usage, are discussed. Methodologies employed in this review involve an extensive analysis of existing literature, empirical data, and case studies on ZLD implementation in the textile industry worldwide. While acknowledging existing adoption barriers, the review underscores ZLD’s potential to guide the textile industry toward a more sustainable and environmentally responsible future. Graphical Abstract


  • Optimisation of machining parameters for single point diamond turning of chromium zirconium copper alloy C18150 using Taguchi and grey relational analysis

    by Bhaskar Goel, Sehijpal Singh, Rama Gopal V. Sarepaka

    In this paper, the results of an experimental study conducted for precision machining of chromium zirconium copper alloy C18150 have been reported. The input parameters include tool overhang, tool nose radius, feed rate, spindle speed and depth of cut. A flat profile is generated on a disc of chromium zirconium copper alloy C18150 with three performance characteristics, surface roughness (Ra), profile error (Pt) and waviness error (Wa). The process parameters are optimised to obtain best surface finish with minimum profile and waviness errors. Taguchi approach coupled with grey relational analysis has been used to determine optimum combination of input process parameters. The best values of surface finish obtained after multi-responses optimisation is 12.4 nm having profile error and Wa of 0.166 µm and 0.071 µm respectively.


  • Optimisation of machining parameters for single point diamond turning of chromium zirconium copper alloy C18150 using Taguchi and grey relational analysis

    by Rama Gopal V. Sarepaka, Bhaskar Goel, Sehijpal Singh

    In this paper, the results of an experimental study conducted for precision machining of chromium zirconium copper alloy C18150 have been reported. The input parameters include tool overhang, tool nose radius, feed rate, spindle speed and depth of cut. A flat profile is generated on a disc of chromium zirconium copper alloy C18150 with three performance characteristics, surface roughness (Ra), profile error (Pt) and waviness error (Wa). The process parameters are optimised to obtain best surface finish with minimum profile and waviness errors. Taguchi approach coupled with grey relational analysis has been used to determine optimum combination of input process parameters. The best values of surface finish obtained after multi-responses optimisation is 12.4 nm having profile error and Wa of 0.166 µm and 0.071 µm respectively.

  • Precision Deterministic Machining of Polymethyl Methacrylate by Single-Point Diamond Turning

    by Bhaskar Goel, Sehijpal Singh, Rama Gopal V. Sarepaka

    Polymethyl methacrylate (PMMA) is widely used as substrate material for optical fabrication in infrared and visual applications. The single-point diamond turning (SPDT) being one of the deterministic precision machining technologies needs to be explored for the manufacturing of the optical components as it is capable of providing the required characteristics such as accuracy, quality, and repeatability. Therefore, it becomes imperative to study the role of influential factors in affecting the machining characteristics of PMMA. The present work is an experimental outcome of precision deterministic machining of PMMA with SPDT. The five input factors of depth of cut, tool overhang, tool nose radius, rotational speed of spindle, and cutting feed rate are considered for machining a flat profile. Surface roughness (Ra), waviness error (Wa), and profile error (Pt) are three output parameters. The process is optimized individually for Ra, Wa, and Pt by Taguchi method. Subsequently, Ra, Wa, and Pt are optimized simultaneously by grey relation to obtain an optimal solution which identifies rotational speed of the spindle, depth of cut, and cutting feed rate as significant parameters. Ra as 11.9 nm, Wa as 0.0289 µm, and Pt as 0.285 µm are obtained as minimum values. Effect of coolant on transmission of light is also studied.


  • Optimizing Single Point Diamond Turning for Mono-Crystalline Germanium Using Grey Relational Analysis

    by Bhaskar Goel, Sehijpal Singh, Ramagopal V. Sarepaka

    In this paper the results of an experimental study conducted for precision machining of mono-crystalline germanium with single point diamond turning (SPDT) have been reported. The input parameters include the top rake angle, tool overhang, depth of cut, tool feed rate, and rotational speed of the workpiece. The flat profile is generated on a disk of mono-crystalline germanium possessing three performance characteristics: surface roughness (Ra), profile error (Pt), and waviness error (Wa). The process parameters are optimized to obtain the best surface finish with minimum profile and waviness errors by using the Taguchi method. The grey relational analysis is employed for carrying out multiresponse optimization of performance parameters. The best value of surface finish obtained after multiresponse optimization is 10.7 nm having a profile error and a waviness error of 0.202 µm and 0.046 µm, respectively.