Dongbin Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dongbin Liu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Shifeng Li
College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang 110142, China
4 shared publications Yanming Shen
4 shared publicationsLihui Fan
3 shared publicationsDan Liu
1 shared publicationFei Li
1 shared publicationJuan Yang
Liaoning Provincial Key Laboratory of Chemical Separation Technology , College of Chemical Engineering, Shenyang University of Chemical Technology , No. 11 Street, Shenyang Economical and Technological Developing Zone, Shenyang , 110142 , China
1 shared publication
Latest Publications
- Open Access
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (5) , 2064-2072
Removal of Cu2+ from the aqueous solution by tartrate-intercalated layered double hydroxide
The tartrate-intercalated MgAl layered double hydroxide (MgAl-TA LDH) was prepared by ion-exchange method at the acid solution using MgAl-CO3 LDH as the precursor. The adsorption of Cu2+ on MgAl-TA LDH was studied and some influence factors such as contact time, initial Cu2+ concentration, adsorbent dosage, solution pH, and adsorption temperature were investigated. Three kinds of adsorption isotherms (Langmuir model, Freundlich model, and Redlich–Peterson model) were investigated; the results indicated that equilibrium was well described by Langmuir isotherm, predicting the adsorption of Cu2+ on MgAl-TA adsorbents was a monolayer adsorption. The equilibrium kinetic adsorption data were fitted to the pseudo-second order kinetic equation. Furthermore, the adsorption of Cu2+ was controlled mainly by chemical process combined with intra-particle diffusion. Parameters of adsorption thermodynamic suggested that the interaction of Cu2+ adsorbed by MgAl-TA LDH adsorbents was spontaneous and endothermic.
- 1 January 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (5) , 2064-2072
Open AccessRemoval of Cu2+ from the aqueous solution by tartrate-intercalated layered double hydroxide
The tartrate-intercalated MgAl layered double hydroxide (MgAl-TA LDH) was prepared by ion-exchange method at the acid solution using MgAl-CO3 LDH as the precursor. The adsorption of Cu2+ on MgAl-TA LDH was studied and some influence factors such as contact time, initial Cu2+ concentration, adsorbent dosage, solution pH, and adsorption temperature were investigated. Three kinds of adsorption isotherms (Langmuir model, Freundlich model, and Redlich–Peterson model) were investigated; the results indicated that equilibrium was well described by Langmuir isotherm, predicting the adsorption of Cu2+ on MgAl-TA adsorbents was a monolayer adsorption. The equilibrium kinetic adsorption data were fitted to the pseudo-second order kinetic equation. Furthermore, the adsorption of Cu2+ was controlled mainly by chemical process combined with intra-particle diffusion. Parameters of adsorption thermodynamic suggested that the interaction of Cu2+ adsorbed by MgAl-TA LDH adsorbents was spontaneous and endothermic.
- 1 April 2015
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 7 (4) , 756-761
Novel Nanomaterials of 2-Benzoylbenzoic Acid Anions Intercalated Magnesium Aluminum Layered Double Hydroxides for UV Absorption Properties
- 1 April 2015
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 7 (4) , 756-761
Novel Nanomaterials of 2-Benzoylbenzoic Acid Anions Intercalated Magnesium Aluminum Layered Double Hydroxides for UV Absorption Properties
- 1 December 2012
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 4 (12) , 1214-1219
Fabrication of TiO2 Nanotube Films Modified with Ag2S and Photoelectrocatalytic Decolorization of Methyl Orange Under Solar Light
Highly ordered, self-assembled TiO2 nanotube (TNT) films were fabricated on titanium foil by anodic oxidation and were modified with Ag2S by a successive ionic layer adsorption and reaction (SILAR) process. The resulting TNTs were characterized by SEM, XRD, and UV-vis absorption spectroscopy. Ag2S modification resulted in a large increase in visible light absorption, and thus visible light activity of the catalysts. The morphology and distribution of Ag2S particles on the surface of the TNT films were mainly affected by the number of cycles during the doping process. Photoelectrocatalytic (PEC) decolorization of methyl orange (MO) on TNT film under simulated solar light illumination was improved after modification with Ag2S, with a maximum decolorization of 83% after 3 h observed on Ag2S/TNT film with 10 cycles of Ag2S doping, attributed to the uniform distribution and suitable size of Ag2S on the surface of the TNT film.
- 1 December 2012
- Published by American Scientific Publishers in Science of Advanced Materials
- Vol. 4 (12) , 1214-1219
Fabrication of TiO2 Nanotube Films Modified with Ag2S and Photoelectrocatalytic Decolorization of Methyl Orange Under Solar Light
Highly ordered, self-assembled TiO2 nanotube (TNT) films were fabricated on titanium foil by anodic oxidation and were modified with Ag2S by a successive ionic layer adsorption and reaction (SILAR) process. The resulting TNTs were characterized by SEM, XRD, and UV-vis absorption spectroscopy. Ag2S modification resulted in a large increase in visible light absorption, and thus visible light activity of the catalysts. The morphology and distribution of Ag2S particles on the surface of the TNT films were mainly affected by the number of cycles during the doping process. Photoelectrocatalytic (PEC) decolorization of methyl orange (MO) on TNT film under simulated solar light illumination was improved after modification with Ag2S, with a maximum decolorization of 83% after 3 h observed on Ag2S/TNT film with 10 cycles of Ag2S doping, attributed to the uniform distribution and suitable size of Ag2S on the surface of the TNT film.
- 1 November 2012
- Published by Taylor & Francis in Composite Interfaces
- Vol. 19 (8) , 489-498
One-step fabrication of oriented Mg/Al-layered double hydroxide film on magnesium substrate with urea hydrolysis and its corrosion resistance
This work presents a simple and direct method for synthesizing Mg/Al-layered double hydroxides (MgAl-LDHs) film on an Mg sheet by in situ hydrothermal crystallization with urea hydrolysis, and protecting the Mg sheet from corrosion. The morphology and structure of the LDHs film were characterized by scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy, respectively. A uniform and compact thin film was formed, of which the LDHs platelets were highly oriented with their ab-face perpendicular to the Mg substrate. XRD pattern and FT-IR spectrum show that MgAl-LDHs film was formed accompanied with Mg(OH)2. Polarization measurements showed that the LDHs film exhibited a low corrosion current density value of 10−6 A/cm2. The strong adhesion between the film and the substrate was observed by cross-cutting method. These results indicated that the LDHs film can effectively protect Mg sheet from corrosion.
- 1 November 2012
- Published by Taylor & Francis in Composite Interfaces
- Vol. 19 (8) , 489-498
One-step fabrication of oriented Mg/Al-layered double hydroxide film on magnesium substrate with urea hydrolysis and its corrosion resistance
This work presents a simple and direct method for synthesizing Mg/Al-layered double hydroxides (MgAl-LDHs) film on an Mg sheet by in situ hydrothermal crystallization with urea hydrolysis, and protecting the Mg sheet from corrosion. The morphology and structure of the LDHs film were characterized by scanning electron microscopy, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy, respectively. A uniform and compact thin film was formed, of which the LDHs platelets were highly oriented with their ab-face perpendicular to the Mg substrate. XRD pattern and FT-IR spectrum show that MgAl-LDHs film was formed accompanied with Mg(OH)2. Polarization measurements showed that the LDHs film exhibited a low corrosion current density value of 10−6 A/cm2. The strong adhesion between the film and the substrate was observed by cross-cutting method. These results indicated that the LDHs film can effectively protect Mg sheet from corrosion.
- 20 March 2011
- Published by China Science Publishing & Media Ltd. in Acta Polymerica Sinica
- Vol. 11 (3) , 261-266
PMMA/TBT HONEYCOMB PATTERNED ORGANIC-INORGANIC HYBRID FILMS PREPARED BY BREATH FIGURES METHOD
- 20 March 2011
- Published by China Science Publishing & Media Ltd. in Acta Polymerica Sinica
- Vol. 11 (3) , 261-266
PMMA/TBT HONEYCOMB PATTERNED ORGANIC-INORGANIC HYBRID FILMS PREPARED BY BREATH FIGURES METHOD