Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Astrid Pinzano has a total of 453 co-authors. Here are the top co-authors by number of shared publications:

  • Pierre Gillet

    CRPV, Nancy, France

    29 shared publications
  • Patrick Netter

    UMR 7561 CNRS, Nancy Université “Physiopathologie, Pharmacologie et Ingénierie Articulaires,” Vandoeuvre lès Nancy, France

    16 shared publications
  • Damien Loeuille

    Department of Rheumatology, Nancy University Hospital, 54511 Vandœuvre-lès-Nancy, France; Ingénierie Moléculaire et Physiopathologie Articulaire (IMoPA). UMR 7365 CNRS-University of Lorraine, Nancy, France

    13 shared publications
  • P. Netter

    13 shared publications
  • Christel Henrionnet

    UMR 7365 CNRS-Université de Lorraine IMoPA, Biopôle de l'Université de Lorraine, Campus Brabois-Santé, 9, Avenue de la Forêt de Haye, BP20199, 54505 Vandœuvre-Lès-Nancy, France

    11 shared publications
  • Didier Mainard

    UMR 7365 CNRS, Université de Lorraine, IMoPA, Bâtiment Biopôle - Faculté de Médecine, Nancy, France

    11 shared publications

Latest Publications

  • Increasing Collagen to Bioink Drives Mesenchymal Stromal Cells-Chondrogenesis from Hyaline to Calcified Layers

    by Océane Messaoudi, Christel Henrionnet, Edwin-Joffrey Courtial, Laurent Grossin, Didier Mainard, Laurent Galois, Damien Loeuille, Christophe Marquette, Pierre Gillet, Astrid Pinzano

    The bioextrusion of mesenchymal stromal cells (MSCs) directly seeded in a bioink enables the production of 3D constructs, promoting their chondrogenic differentiation. Our study aimed to evaluate the effect of different type I collagen concentrations in the bioink on MSCs' chondrogenic differentiation. We printed 3D constructs using an alginate, gelatin, and fibrinogen-based bioink cellularized with MSCs, with four different quantities of type I collagen addition (0.0, 0.5, 1.0, and 5.0 mg per bioink syringe). We assessed the influence of the bioprinting process, the bioink composition, and the growth factor (TGF-ꞵ1) on the MSCs' survival rate. We confirmed the biocompatibility of the process and the bioinks' cytocompatibility. We evaluated the chondrogenic effects of TGF-ꞵ1 and collagen addition on the MSCs' chondrogenic properties through macroscopic observation, shrinking ratio, RT-PCR, glycosaminoglycan synthesis, histology, and type II collagen immunohistochemistry. The bioink containing 0.5 mg of collagen produces the richest hyaline-like extracellular matrix, presenting itself as a promising tool to recreate the superficial layer of hyaline cartilage. The bioink containing 5.0 mg of collagen enhances the synthesis of a calcified matrix, making it a good candidate for mimicking the calcified cartilaginous layer. Type I collagen thus allows the dose-dependent design of specific hyaline-cartilage layers.


  • Rapamycin-loaded Poly(lactic-co-glycolic) acid nanoparticles: Preparation, characterization, and in vitro toxicity study for potential intra-articular injection

    by Elise Pape, Marianne Parent, Astrid Pinzano, Anne Sapin-Minet, Christel Henrionnet, Pierre Gillet, Julien Scala-Bertola, Nicolas Gambier


  • Open Access

    Relationship between spinal structural damage on radiography and bone fragility on CT in ankylosing spondylitis patients

    by Marine Fauny, Frank Verhoeven, Edem Allado, Eliane Albuisson, Astrid Pinzano, Caroline Morizot, Isabelle Chary-Valckenaere, Damien Loeuille

    To evaluate whether the risk of bone fragility on computed tomography (CT) (scanographic bone attenuation coefficient of the first lumbar vertebra (SBAC-L1)) is associated with the severity of spine structural involvement (mSASSS) in patients with ankylosing spondylitis (AS). This retrospective study included AS patients, followed from 2009 to 2017, who fulfilled the New York criteria and who underwent thoraco-abdomino-pelvic CT and radiography (spine, pelvis). The structural involvement was retained for mSASSS ≥ 2. The SBAC-L1 was measured in Hounsfield units (HU). A SBAC-L1 ≤ 145 HU was used to define patients at risk of vertebral fracture (VF). A total of 73 AS patients were included (mean age: 60.3 (± 10.7) years, 8 women (11%), mean disease duration: 24.6 years (± 13.9)). Sixty patients (82.2%) had a mSASSS ≥ 2 (mean score 20.7 (± 21.2)). The mean SBAC-L1 was 141.1 HU (± 45), 138.1 HU (± 44.8) and 154.8 HU (± 44.9) in the total, mSASSS ≥ 2 and mSASSS < 2 populations, respectively. Patients with bone bridges had lower SBAC-L1 than mSASSS ≥ 2 patients without ankylosis (p = 0.02) and more often SBAC-L1 ≤ 145 HU (73% vs 41.9%, p = 0.006). A SBAC-L1 ≤ 145 HU was not associated with structural spine involvement, but patients with bone bridges had significantly decreased SBAC-L1 and an increased probability of being under the fracture threshold.


  • Open Access

    Stem Cells and Extrusion 3D Printing for Hyaline Cartilage Engineering

    by Océane Messaoudi, Christel Henrionnet, Kevin Bourge, Damien Loeuille, Pierre Gillet, Astrid Pinzano

    Hyaline cartilage is deficient in self-healing properties. The early treatment of focal cartilage lesions is a public health challenge to prevent long-term degradation and the occurrence of osteoarthritis. Cartilage tissue engineering represents a promising alternative to the current insufficient surgical solutions. 3D printing is a thriving technology and offers new possibilities for personalized regenerative medicine. Extrusion-based processes permit the deposition of cell-seeded bioinks, in a layer-by-layer manner, allowing mimicry of the native zonal organization of hyaline cartilage. Mesenchymal stem cells (MSCs) are a promising cell source for cartilage tissue engineering. Originally isolated from bone marrow, they can now be derived from many different cell sources (e.g., synovium, dental pulp, Wharton’s jelly). Their proliferation and differentiation potential are well characterized, and they possess good chondrogenic potential, making them appropriate candidates for cartilage reconstruction. This review summarizes the different sources, origins, and densities of MSCs used in extrusion-based bioprinting (EBB) processes, as alternatives to chondrocytes. The different bioink constituents and their advantages for producing substitutes mimicking healthy hyaline cartilage is also discussed.


  • Consequences of spinal ankylosis on bone trabecular fragility assessed on CT scans in patients with ankylosing spondylitis. A retrospective study

    by Marine Fauny, Caroline Morizot, Edem Allado, Frank Verhoeven, Eliane Albuisson, Marie Semaan, Astrid Pinzano, Isabelle Chary-Valckenaere, Damien Loeuille


  • Open Access

    HydraPsiSeq: a method for systematic and quantitative mapping of pseudouridines in RNA

    by Virginie Marchand, Florian Pichot, Paul Neybecker, Lilia Ayadi, Valérie Bourguignon-Igel, Ludivine Wacheul, Denis L J Lafontaine, Astrid Pinzano, Mark Helm, Yuri Motorin

    Developing methods for accurate detection of RNA modifications remains a major challenge in epitranscriptomics. Next-generation sequencing-based mapping approaches have recently emerged but, often, they are not quantitative and lack specificity. Pseudouridine (ψ), produced by uridine isomerization, is one of the most abundant RNA modification. ψ mapping classically involves derivatization with soluble carbodiimide (CMCT), which is prone to variation making this approach only semi-quantitative. Here, we developed ‘HydraPsiSeq’, a novel quantitative ψ mapping technique relying on specific protection from hydrazine/aniline cleavage. HydraPsiSeq is quantitative because the obtained signal directly reflects pseudouridine level. Furthermore, normalization to natural unmodified RNA and/or to synthetic in vitro transcripts allows absolute measurements of modification levels. HydraPsiSeq requires minute amounts of RNA (as low as 10–50 ng), making it compatible with high-throughput profiling of diverse biological and clinical samples. Exploring the potential of HydraPsiSeq, we profiled human rRNAs, revealing strong variations in pseudouridylation levels at ∼20–25 positions out of total 104 sites. We also observed the dynamics of rRNA pseudouridylation throughout chondrogenic differentiation of human bone marrow stem cells. In conclusion, HydraPsiSeq is a robust approach for the systematic mapping and accurate quantification of pseudouridines in RNAs with applications in disease, aging, development, differentiation and/or stress response.


  • Open Access

    Respective stemness and chondrogenic potential of mesenchymal stem cells isolated from human bone marrow, synovial membrane, and synovial fluid

    by Paul Neybecker, Christel Henrionnet, Elise Pape, Laurent Grossin, Didier Mainard, Laurent Galois, Damien Loeuille, Pierre Gillet, Astrid Pinzano

    Background: MSCs isolated from bone marrow (BM-MSCs) have well-established chondrogenic potential, but MSCs derived from the synovial membrane (SM-MSCs) and synovial fluid (SF-MSCs) are thought to possess superior chondrogenicity. This study aimed to compare the in vitro immunophenotype and trilineage and chondrogenic potential of BM-MSCs to SM-MSCs and SF-MSCs.Methods: MSCs were isolated from bone marrow (BM-MSCs), synovial membrane (SM-MSCs), and synovial fluid (SF-MSCs) extracted from the hips (BM) and knees (SM and SF) of advanced OA patients undergoing arthroplasty. Flow cytometric analysis was used at P2 to evaluate cell stemness. The trilinear differentiation test was performed at P2. At P3, MSC-seeded collagen sponges were cultured in chondrogenic medium for 28 days. Chondrogenic gene expression was quantified by qRT-PCR. Finally, the implants were stained to assess the deposition of proteoglycans and type II collagen.Results: Despite variability, the immunophenotyping of BM-MSCs, SM-MSCs, and SF-MSCs was quite similar. All cell types were positive for the expression of stem cell markers and negative for exclusion markers. Additionally, chondrogenic differentiation and hypertrophy were more pronounced in BM-MSCs (ACAN,SOX9,COL2B, andCOL10A) than in SF-MSCs, with SM-MSCs having intermediate characteristics. Concerning matrix synthesis, the three cell types were equipotent in terms of GAG content, while BM-MSC ECM synthesis of type II collagen was superior.Conclusions: Chondrogenic MSCs are easily collected from SM and SF in advanced human OA, but in vitro chondrogenesis that is superior to age-matched BM-MSCs should not be expected. However, due to intra-articular priming, SF-MSCs did not overexpress hypertrophic gene.


  • Open Access

    Oxytocin Controls Chondrogenesis and Correlates with Osteoarthritis

    by Christian H. Roux, Didier F. Pisani, Pierre Gillet, Eric Fontas, Hédi Ben Yahia, Mansour Djedaini, Damien Ambrosetti, Jean-François Michiels, Patricia Panaia-Ferrari, Véronique Breuil, et al.

    This study investigated the relationship of oxytocin (OT) to chondrogenesis and osteoarthritis (OA). Human bone marrow and multipotent adipose-derived stem cells were cultured in vitro in the absence or presence of OT and assayed for mRNA transcript expression along with histological and immunohistochemical analyses. To study the effects of OT in OA in vivo, a rat model and a human cohort of 63 men and 19 women with hand OA and healthy controls, respectively, were used. The baseline circulating OT, interleukin-6, leptin, and oestradiol levels were measured, and hand X-ray examinations were performed for each subject. OT induced increased aggrecan, collagen (Col) X, and cartilage oligomeric matrix protein mRNA transcript levels in vitro, and the immunolabelling experiments revealed a normalization of Sox9 and Col II protein expression levels. No histological differences in lesion severity were observed between rat OA groups. In the clinical study, a multivariate analysis adjusted for age, body mass index, and leptin levels revealed a significant association between OA and lower levels of OT (odds ratio = 0.77; p = 0.012). Serum OT levels are reduced in patients with hand OA, and OT showed a stimulatory effect on chondrogenesis. Thus, OT may contribute to the pathophysiology of OA.


  • Open Access

    Combining Innovative Bioink and Low Cell Density for the Production of 3D-Bioprinted Cartilage Substitutes: A Pilot Study

    by Christel Henrionnet, Léa Pourchet, Paul Neybecker, Océane Messaoudi, Pierre Gillet, Damien Loeuille, Didier Mainard, Christophe Marquette, Astrid Pinzano

    3D bioprinting offers interesting opportunities for 3D tissue printing by providing living cells with appropriate scaffolds with a dedicated structure. Biological advances in bioinks are currently promising for cell encapsulation, particularly that of mesenchymal stem cells (MSCs). We present herein the development of cartilage implants by 3D bioprinting that deliver MSCs encapsulated in an original bioink at low concentration. 3D-bioprinted constructs (10×10×4 mm) were printed using alginate/gelatin/fibrinogen bioink mixed with human bone marrow MSCs. The influence of the bioprinting process and chondrogenic differentiation on MSC metabolism, gene profiles, and extracellular matrix (ECM) production at two different MSC concentrations (1 million or 2 million cells/mL) was assessed on day 28 (D28) by using MTT tests, real-time RT-PCR, and histology and immunohistochemistry, respectively. Then, the effect of the environment (growth factors such as TGF-β1/3 and/or BMP2 and oxygen tension) on chondrogenicity was evaluated at a 1 M cell/mL concentration on D28 and D56 by measuring mitochondrial activity, chondrogenic gene expression, and the quality of cartilaginous matrix synthesis. We confirmed the safety of bioextrusion and gelation at concentrations of 1 million and 2 million MSC/mL in terms of cellular metabolism. The chondrogenic effect of TGF-β1 was verified within the substitute on D28 by measuring chondrogenic gene expression and ECM synthesis (glycosaminoglycans and type II collagen) on D28. The 1 M concentration represented the best compromise. We then evaluated the influence of various environmental factors on the substitutes on D28 (differentiation) and D56 (synthesis). Chondrogenic gene expression was maximal on D28 under the influence of TGF-β1 or TGF-β3 either alone or in combination with BMP-2. Hypoxia suppressed the expression of hypertrophic and osteogenic genes. ECM synthesis was maximal on D56 for both glycosaminoglycans and type II collagen, particularly in the presence of a combination of TGF-β1 and BMP-2. Continuous hypoxia did not influence matrix synthesis but significantly reduced the appearance of microcalcifications within the extracellular matrix. The described strategy is very promising for 3D bioprinting by the bioextrusion of an original bioink containing a low concentration of MSCs followed by the culture of the substitutes in hypoxic conditions under the combined influence of TGF-β1 and BMP-2.