Artur Wymysłowski
Artur Wymysłowski has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Kamil Nouri Allaf
Wrocław University of Technology
2 shared publications- Agnieszka Podwin
Wrocław University of Science and Technology
1 shared publication - Danylo Lizanets
Faculty of Microsystem Electronics and Photonics, Wrocław University of Science and Technology, 50-370 Wrocław, Poland
1 shared publication Dawid Jan Król
Wrocław University of Technology
1 shared publication- Dawid Przystupski
Department of Paediatric Bone Marrow Transplantation, Oncology and Haematology, Wroclaw Medical University, Borowska 213, Wroclaw 50-556, Poland
1 shared publication - Jan A. Dziuban
Department of Microsystems, Faculty of Electronics, Photonics and Microsystems, Wroclaw University of Science and Technology, 50370 Wroclaw, Poland
1 shared publication
Latest Publications
- Open Access
- 23 May 2023
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Journal of Automation, Mobile Robotics and Intelligent Systems
- p. 55-63
Application of the OpenCV Library in Indoor Hydroponic Plantations for Automatic Height Assessment of Plants
This paper presents a method for automatic plants’ height measurements in indoor hydroponic plantations by using the OpenCV library and the Python programming language. Using the elaborated algorithm and Raspberry Pi driven system with an external camera, the growth process of multiple pak choi cabbages (Brassica rapa L. subsp. Chinensis) was observed. The main aim and novelty of the presented algorithm was to observe the plants’ height in hydroponic stations, where the reflective foil is used, to extract the plants’ growth rate as a parameter. Basing on the pictures of the hydroponic plantation, the bases of the plants, reflections, and plants themselves were separated. Finally, the algorithm was used for plants’ height estimation. The achieved results were then compared to the results obtained manually. The algorithm will be used in future research for plants’ growth optimization.
- 23 May 2023
- Published by PIAP - Industrial Research Institute for Automation and Measurements in Journal of Automation, Mobile Robotics and Intelligent Systems
- p. 55-63
Open AccessApplication of the OpenCV Library in Indoor Hydroponic Plantations for Automatic Height Assessment of Plants
This paper presents a method for automatic plants’ height measurements in indoor hydroponic plantations by using the OpenCV library and the Python programming language. Using the elaborated algorithm and Raspberry Pi driven system with an external camera, the growth process of multiple pak choi cabbages (Brassica rapa L. subsp. Chinensis) was observed. The main aim and novelty of the presented algorithm was to observe the plants’ height in hydroponic stations, where the reflective foil is used, to extract the plants’ growth rate as a parameter. Basing on the pictures of the hydroponic plantation, the bases of the plants, reflections, and plants themselves were separated. Finally, the algorithm was used for plants’ height estimation. The achieved results were then compared to the results obtained manually. The algorithm will be used in future research for plants’ growth optimization.
- Open Access
- 14 February 2020
- Published by MDPI AG in Micromachines
- Vol. 11 (2) , 196
Lab-on-Chip Platform for Culturing and Dynamic Evaluation of Cells Development
This paper presents a full-featured microfluidic platform ensuring long-term culturing and behavioral analysis of the radically different biological micro-objects. The platform uses all-glass lab-chips and MEMS-based components providing dedicated micro-aquatic habitats for the cells, as well as their intentional disturbances on-chip. Specially developed software was implemented to characterize the micro-objects metrologically in terms of population growth and cells’ size, shape, or migration activity. To date, the platform has been successfully applied for the culturing of freshwater microorganisms, fungi, cancer cells, and animal oocytes, showing their notable population growth, high mobility, and taxis mechanisms. For instance, circa 100% expansion of porcine oocytes cells, as well as nearly five-fold increase in E. gracilis population, has been achieved. These results are a good base to conduct further research on the platform versatile applications.
- 14 February 2020
- Published by MDPI AG in Micromachines
- Vol. 11 (2) , 196
Open AccessLab-on-Chip Platform for Culturing and Dynamic Evaluation of Cells Development
This paper presents a full-featured microfluidic platform ensuring long-term culturing and behavioral analysis of the radically different biological micro-objects. The platform uses all-glass lab-chips and MEMS-based components providing dedicated micro-aquatic habitats for the cells, as well as their intentional disturbances on-chip. Specially developed software was implemented to characterize the micro-objects metrologically in terms of population growth and cells’ size, shape, or migration activity. To date, the platform has been successfully applied for the culturing of freshwater microorganisms, fungi, cancer cells, and animal oocytes, showing their notable population growth, high mobility, and taxis mechanisms. For instance, circa 100% expansion of porcine oocytes cells, as well as nearly five-fold increase in E. gracilis population, has been achieved. These results are a good base to conduct further research on the platform versatile applications.
- Open Access
- 30 June 2017
- Published by Granthaalayah Publications and Printers in International Journal of Research -GRANTHAALAYAH
- Vol. 5 (6) , 353-361
MICROWAVE TRAVELLING WAVE TUBE - A SUMMARY OF AN ANALYTICAL, NUMERICAL AND EXPERIMENTAL THERMAL ANALYSIS
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes and radar systems. TWT's seem to be an alternative and a more reliable solution than semiconductor devices when building high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. In fact, the standard TWT is treated as a high power device and the supplied power is dissipated mainly through conduction and convection phenomena. In practical applications, depending on a type of TWT, they can be cooled either by a forced liquid or air circulation. The main goal of the presented research was to perform analytical, experimental and numerical analysis of temperature distribution of a low band TWT in case of a typical working condition. Because theoretical analysis seems to be very complex, thus it was decided to support it with experimental measurements and numerical simulations as well as with the simplified analytical formulas. As a first step of the presented research, the analytical analysis and numerical modelling of the helix TWT was carried out. The objective of the thermal analysis was to assess the temperature distribution in different parts of the helix TWT assembly during extreme standard and working conditions. Afterwards, the obtained numerical results were validated by experimental measurements, which were carried out using a custom designed TWT test sample and corresponding experimental measurement tools.
- 30 June 2017
- Published by Granthaalayah Publications and Printers in International Journal of Research -GRANTHAALAYAH
- Vol. 5 (6) , 353-361
Open AccessMICROWAVE TRAVELLING WAVE TUBE - A SUMMARY OF AN ANALYTICAL, NUMERICAL AND EXPERIMENTAL THERMAL ANALYSIS
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes and radar systems. TWT's seem to be an alternative and a more reliable solution than semiconductor devices when building high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. In fact, the standard TWT is treated as a high power device and the supplied power is dissipated mainly through conduction and convection phenomena. In practical applications, depending on a type of TWT, they can be cooled either by a forced liquid or air circulation. The main goal of the presented research was to perform analytical, experimental and numerical analysis of temperature distribution of a low band TWT in case of a typical working condition. Because theoretical analysis seems to be very complex, thus it was decided to support it with experimental measurements and numerical simulations as well as with the simplified analytical formulas. As a first step of the presented research, the analytical analysis and numerical modelling of the helix TWT was carried out. The objective of the thermal analysis was to assess the temperature distribution in different parts of the helix TWT assembly during extreme standard and working conditions. Afterwards, the obtained numerical results were validated by experimental measurements, which were carried out using a custom designed TWT test sample and corresponding experimental measurement tools.
- Open Access
- 21 January 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 104 (1) , 012010
Experimental approach to validation of an analytical and numerical thermal analysis of a travelling wave tube
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes, e.g. radar systems. TWT's is an alternative solution in comparison to semiconductor devices in case of high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. The main goal of the research was to perform analytical, experimental and numerical analysis of a temperature distribution of a low band TWT in case of a typical working condition. Because the theoretical analysis seems to be very complex thus it was decided to compare the experimental results with the numerical simulations as well as with the simplified analytical formulas. As a first step of the presented research, the analytical analysis and numerical modelling of the helix TWT was carried out. The objective of the thermal analysis was to assess the temperature distribution in different parts of the helix TWT assembly during the extreme standard and working conditions. As a second stage of the research the numerical results were validated by the experimental measurements, which were carried out using a specially designed TWT test samples and corresponding experimental measurement tools.
- 21 January 2016
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 104 (1) , 012010
Open AccessExperimental approach to validation of an analytical and numerical thermal analysis of a travelling wave tube
Travelling Wave Tube (TWT) is an electronic vacuum microwave device, which is used as a high power microwave amplifier, mainly in telecommunication purposes, e.g. radar systems. TWT's is an alternative solution in comparison to semiconductor devices in case of high power and high frequency applications. Thermal behaviour of TWT is one of the key aspects influencing its reliability and working parameters. The main goal of the research was to perform analytical, experimental and numerical analysis of a temperature distribution of a low band TWT in case of a typical working condition. Because the theoretical analysis seems to be very complex thus it was decided to compare the experimental results with the numerical simulations as well as with the simplified analytical formulas. As a first step of the presented research, the analytical analysis and numerical modelling of the helix TWT was carried out. The objective of the thermal analysis was to assess the temperature distribution in different parts of the helix TWT assembly during the extreme standard and working conditions. As a second stage of the research the numerical results were validated by the experimental measurements, which were carried out using a specially designed TWT test samples and corresponding experimental measurement tools.
- 7 November 2014
- Published by Springer Nature
- p. 175-194
Analysis of an Influence of a Conversion Level on Simulation Results of the Crosslinked Polymers
- 7 November 2014
- Published by Springer Nature
- p. 175-194
Analysis of an Influence of a Conversion Level on Simulation Results of the Crosslinked Polymers
- 7 November 2014
- Published by Springer Nature
- p. 67-79
Analysis of the Adhesion Work with a Molecular Modeling Method and a Wetting Angle Measurement
- 7 November 2014
- Published by Springer Nature
- p. 67-79
Analysis of the Adhesion Work with a Molecular Modeling Method and a Wetting Angle Measurement