Seiji Fukushima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Seiji Fukushima has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Tomohiro Hachino
Kagoshima University
3 shared publications - Toshio Watanabe
Graduate School of Science and Engineering, Kagoshima University, Kagoshima, Japan
3 shared publications - Tsutomu Nagayama
Graduate School of Science and Engineering, Kagoshima University, Kagoshima, Japan
3 shared publications - Hiroki Higuchi
Institute for Materials Chemistry and Engineering, Kyushu University, 6-1 Kasuga-koen Kasuga-shi, Fukuoka 816-8580, Japan
2 shared publications - Hirotsugu Kikuchi
Kyushu University
2 shared publications - Toshinobu Kaneko
Tokyo University of Science
2 shared publications
Latest Publications
- Open Access
Design Method of Acoustic Metamaterials for Negative Refractive Index Acoustic Lenses Based on the Transmission-Line Theory
The design theory for electromagnetic metamaterials with negative refractive indices by using a distributed transmission-line model is introduced to the design of acoustic metamaterials, and a negative refractive index (NRI) acoustic lens is designed theoretically. Adjustments to the negative refractive indices of metamaterials have been carried out by calculations with numerical simulators in conventional design methods. As the results show, many calculations are needed to determine the shape of the unit structures and there are issues in that it is difficult to design those rigorously, meaning that limitations regarding the degree of freedom in the designs are many. On the other hand, the transmission-line model can rigorously design the unit cell structures of both the negative refractive index metamaterials and the background media with the positive refractive indices by calculations with the design formulas and modifying the error from the theory with a small calculation. In this paper, a meander acoustic waveguide unit cell structure is proposed in order to realize a structure with characteristics equivalent to the model, and the waveguide width and length for realizing an NRI acoustic lens are determined from the design formula of the model. The frequency dispersion characteristics of the proposed structure are also computed by eigenvalue analysis and the error in the waveguide length from the theoretical value is modified by a minor adjustment of the waveguide length. In addition, the NRI acoustic lens is constituted by periodically arranging the proposed unit cell structure with the calculated parameters, and the full-wave simulations are carried out to show the validity of the design theory. The results show that the designed lens operates at 2.5 kHz.
Open AccessDesign Method of Acoustic Metamaterials for Negative Refractive Index Acoustic Lenses Based on the Transmission-Line Theory
The design theory for electromagnetic metamaterials with negative refractive indices by using a distributed transmission-line model is introduced to the design of acoustic metamaterials, and a negative refractive index (NRI) acoustic lens is designed theoretically. Adjustments to the negative refractive indices of metamaterials have been carried out by calculations with numerical simulators in conventional design methods. As the results show, many calculations are needed to determine the shape of the unit structures and there are issues in that it is difficult to design those rigorously, meaning that limitations regarding the degree of freedom in the designs are many. On the other hand, the transmission-line model can rigorously design the unit cell structures of both the negative refractive index metamaterials and the background media with the positive refractive indices by calculations with the design formulas and modifying the error from the theory with a small calculation. In this paper, a meander acoustic waveguide unit cell structure is proposed in order to realize a structure with characteristics equivalent to the model, and the waveguide width and length for realizing an NRI acoustic lens are determined from the design formula of the model. The frequency dispersion characteristics of the proposed structure are also computed by eigenvalue analysis and the error in the waveguide length from the theoretical value is modified by a minor adjustment of the waveguide length. In addition, the NRI acoustic lens is constituted by periodically arranging the proposed unit cell structure with the calculated parameters, and the full-wave simulations are carried out to show the validity of the design theory. The results show that the designed lens operates at 2.5 kHz.
- Open Access
Two-Dimensional Distributed Transmission-Line Models for Broadband Full-Tensor Anisotropic Acoustic Metamaterials Based on Transformation Acoustics
We propose the design method for broadband acoustic metamaterials based on the concept of transformation acoustics. Two-dimensional distributed transmission-line (TL) models for full-tensor anisotropic electromagnetic metamaterials are applied to full-tensor anisotropic acoustic metamaterials and the design formulas are shown to uniquely determine the structural parameters of the unit cells. Two-dimensional acoustic waveguide unit cell structures for realizing the TL models are proposed and an acoustic carpet cloak and an acoustic illusion medium are designed according to the introduced theory. The complex sound pressure distributions in the acoustic waveguides of the unit cells are calculated by full-wave simulations to verify the validity of the proposed method, and the broadband operations of the designed carpet cloak and illusion medium are confirmed from the results.
Open AccessTwo-Dimensional Distributed Transmission-Line Models for Broadband Full-Tensor Anisotropic Acoustic Metamaterials Based on Transformation Acoustics
We propose the design method for broadband acoustic metamaterials based on the concept of transformation acoustics. Two-dimensional distributed transmission-line (TL) models for full-tensor anisotropic electromagnetic metamaterials are applied to full-tensor anisotropic acoustic metamaterials and the design formulas are shown to uniquely determine the structural parameters of the unit cells. Two-dimensional acoustic waveguide unit cell structures for realizing the TL models are proposed and an acoustic carpet cloak and an acoustic illusion medium are designed according to the introduced theory. The complex sound pressure distributions in the acoustic waveguides of the unit cells are calculated by full-wave simulations to verify the validity of the proposed method, and the broadband operations of the designed carpet cloak and illusion medium are confirmed from the results.
- Open Access
Constitution Method for Broadband Acoustic Metamaterials Based on the Design Theory of a One-Dimensional Distributed Transmission-Line Model
A method for realizing broadband acoustic metasurfaces composed of a one-dimensional distributed transmission-line model is proposed. There are no design formulas for determining the structural parameters of the structure constituting acoustic metasurfaces in the conventional method, and therefore parameter extractions by means of many calculations with numerical simulations are needed to realize acoustic metasurfaces. There are also narrow band operations or impedance matching problems. On the other hand, this paper shows that we can design broadband acoustic metasurfaces by determining the structural parameters with the design formulas of the model without many calculations. An acoustic metasurface that refracts incident plane waves at an angle of 20 degrees is first designed by using one-dimensional meander acoustic waveguide structures equivalent to the model, and these structural parameters are determined by the design formulas of the model and the modifications of the error from the theory. Full-wave simulations are performed, and the broadband operations and the validity of the design theory are shown from these results. Furthermore, a broadband acoustic flat lens is designed with the proposed structures as an example of the application of the proposed method, and these operations are also demonstrated by similar full-wave simulations.
Open AccessConstitution Method for Broadband Acoustic Metamaterials Based on the Design Theory of a One-Dimensional Distributed Transmission-Line Model
A method for realizing broadband acoustic metasurfaces composed of a one-dimensional distributed transmission-line model is proposed. There are no design formulas for determining the structural parameters of the structure constituting acoustic metasurfaces in the conventional method, and therefore parameter extractions by means of many calculations with numerical simulations are needed to realize acoustic metasurfaces. There are also narrow band operations or impedance matching problems. On the other hand, this paper shows that we can design broadband acoustic metasurfaces by determining the structural parameters with the design formulas of the model without many calculations. An acoustic metasurface that refracts incident plane waves at an angle of 20 degrees is first designed by using one-dimensional meander acoustic waveguide structures equivalent to the model, and these structural parameters are determined by the design formulas of the model and the modifications of the error from the theory. Full-wave simulations are performed, and the broadband operations and the validity of the design theory are shown from these results. Furthermore, a broadband acoustic flat lens is designed with the proposed structures as an example of the application of the proposed method, and these operations are also demonstrated by similar full-wave simulations.
- Open Access
- 31 January 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-12
Design of Prediction-Based Controller for Networked Control Systems with Packet Dropouts and Time-Delay
A novel prediction-based controller design is proposed for networked control systems (NCSs) with stochastic packet dropouts and time-delay in their control channel. The sequence of packet dropouts, which are modelled as a Bernoulli process, is compensated by a zero-order holder (ZOH)-based module, whereas a state predictor is utilized for obtaining the predicted states at the time delayed. In view of dropout compensator and state predictor, a novel modified model predictive controller (MPC) is designed and proposed in the following procedures. Compared to cost function of a general model predictive controller, variables of states are substituted by the predicted ones as obtained from state predictor preliminarily. Then, a logical programming approach is applied to include all the possible circumstances in the prediction horizon. Consequently, the cost function is reformed as simultaneous minimax linear matrix inequalities (LMI) with constraints. As a result, toolbox YALMIP is employed in order to solve such minimax programming problem eventually. Simulation results are presented to show the feasibility and performance of proposed method.
- 31 January 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-12
Open AccessDesign of Prediction-Based Controller for Networked Control Systems with Packet Dropouts and Time-Delay
A novel prediction-based controller design is proposed for networked control systems (NCSs) with stochastic packet dropouts and time-delay in their control channel. The sequence of packet dropouts, which are modelled as a Bernoulli process, is compensated by a zero-order holder (ZOH)-based module, whereas a state predictor is utilized for obtaining the predicted states at the time delayed. In view of dropout compensator and state predictor, a novel modified model predictive controller (MPC) is designed and proposed in the following procedures. Compared to cost function of a general model predictive controller, variables of states are substituted by the predicted ones as obtained from state predictor preliminarily. Then, a logical programming approach is applied to include all the possible circumstances in the prediction horizon. Consequently, the cost function is reformed as simultaneous minimax linear matrix inequalities (LMI) with constraints. As a result, toolbox YALMIP is employed in order to solve such minimax programming problem eventually. Simulation results are presented to show the feasibility and performance of proposed method.
- Open Access
- 1 November 2021
- Published by ASTES Journal in Advances in Science, Technology and Engineering Systems Journal
- Vol. 6 (6) , 07-11
Light Modulation Enhancement by using an Impedance Matching Scheme for a Subcarrier Multiplexed Light Transmitter
- 1 November 2021
- Published by ASTES Journal in Advances in Science, Technology and Engineering Systems Journal
- Vol. 6 (6) , 07-11
Open AccessLight Modulation Enhancement by using an Impedance Matching Scheme for a Subcarrier Multiplexed Light Transmitter
- Open Access
Polymer-Stabilized Blue Phase and Its Application to a 1.5 µm Band Wavelength Selective Filter
The use of polymer-stabilized blue phase (PSBP) including a tolane-type liquid crystal was investigated to develop a voltage-controlled wavelength selective filter for wavelength-division-multiplexing optical fiber network. It was found that the tolane-type liquid crystal introduction can increase both a blue-phase temperature range and a Kerr coefficient. A Fabry–Perot etalon filled with PSBP functioned as a wavelength selective filter, as expected. The tuning wavelength range was 62 nm although peak transmission was not as high as expected. Numerical analysis suggested that light absorption in transparent electrodes may cause the issue. Minor change to the etalon structure will result in improved performance.
Open AccessPolymer-Stabilized Blue Phase and Its Application to a 1.5 µm Band Wavelength Selective Filter
The use of polymer-stabilized blue phase (PSBP) including a tolane-type liquid crystal was investigated to develop a voltage-controlled wavelength selective filter for wavelength-division-multiplexing optical fiber network. It was found that the tolane-type liquid crystal introduction can increase both a blue-phase temperature range and a Kerr coefficient. A Fabry–Perot etalon filled with PSBP functioned as a wavelength selective filter, as expected. The tuning wavelength range was 62 nm although peak transmission was not as high as expected. Numerical analysis suggested that light absorption in transparent electrodes may cause the issue. Minor change to the etalon structure will result in improved performance.
- Open Access
Infrared Extinction of a Dye-Doped (Polymer/Liquid Crystal) Composite Film
Infrared extinction of a dye-doped (polymer/liquid crystal) composite film was investigated. It is found that doping a metal-complex dye into the liquid crystal extended the operation wavelength to an optical fiber communication wavelength of about 1.5 μm. An aperture placed behind the composite film greatly improves an extinction ratio, which suggests the film functions on the basis of light scattering. Some experimental results agree to Rayleigh scattering. The film exhibits the high extinction ratio of 51 or 17.1 dB and a low polarization dependent loss of 7.6% or 0.32 dB and, then, it could be applied to a telecommunication device such as a variable optical attenuator.
Open AccessInfrared Extinction of a Dye-Doped (Polymer/Liquid Crystal) Composite Film
Infrared extinction of a dye-doped (polymer/liquid crystal) composite film was investigated. It is found that doping a metal-complex dye into the liquid crystal extended the operation wavelength to an optical fiber communication wavelength of about 1.5 μm. An aperture placed behind the composite film greatly improves an extinction ratio, which suggests the film functions on the basis of light scattering. Some experimental results agree to Rayleigh scattering. The film exhibits the high extinction ratio of 51 or 17.1 dB and a low polarization dependent loss of 7.6% or 0.32 dB and, then, it could be applied to a telecommunication device such as a variable optical attenuator.
- 1 January 2015
- Published by Springer Nature
- p. 35-40
The Improved 16th-Order Differential Attack on 10- Round Variant of Block Cipher PRESENT
- 1 January 2015
- Published by Springer Nature
- p. 35-40
The Improved 16th-Order Differential Attack on 10- Round Variant of Block Cipher PRESENT
- 1 January 2015
- Published by EJournal Publishing in Journal of Automation and Control Engineering
- p. 418-424
Model Predictive Control of Electric Power Systems Based on Gaussian Process Predictors
- 1 January 2015
- Published by EJournal Publishing in Journal of Automation and Control Engineering
- p. 418-424
Model Predictive Control of Electric Power Systems Based on Gaussian Process Predictors
- 1 January 2013
- Published by EJournal Publishing in International Journal of Electrical Energy
- p. 147-151
The Improved 96th-Order Differential Attack on 11 Rounds of the Block Cipher CLEFIA
- 1 January 2013
- Published by EJournal Publishing in International Journal of Electrical Energy
- p. 147-151
The Improved 96th-Order Differential Attack on 11 Rounds of the Block Cipher CLEFIA