Rajeev Kumar Dohare
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rajeev Kumar Dohare has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Kailash Singh
Department of Chemical Engineering, Malaviya National Institute of Technology, Jaipur, India
4 shared publications Rajesh Kumar
Malaviya National Institute of Technology Jaipur
2 shared publications- Sushant Upadhyaya
Malaviya National Institute of Technology
2 shared publications A.B. Gupta
1 shared publication- Madhu Agarwal
Malaviya National Institute of Technology, Department of Chemical Engineering, Jaipur-302017, India
1 shared publication - Madhu Agarwal
Department of Chemical Engineering, Malaviya National Institute of Technology, Jaipur, India
1 shared publication
Latest Publications
- Open Access
- 31 August 2022
- Published by IntechOpen
Heat Integration of Reactive Divided Wall Distillation Column
In this chapter, the esterification reaction of methyl acetate with methanol and acetic acid is proposed by the new column configuration that is a reactive divided wall distillation column (RDWC). The heat integration of the proposed column configuration is studied and found that heat integration techniques are efficient to save energy up to 14.23% in comparison to the conventional reactive divided wall distillation column.
- 31 August 2022
- Published by IntechOpen
Open AccessHeat Integration of Reactive Divided Wall Distillation Column
In this chapter, the esterification reaction of methyl acetate with methanol and acetic acid is proposed by the new column configuration that is a reactive divided wall distillation column (RDWC). The heat integration of the proposed column configuration is studied and found that heat integration techniques are efficient to save energy up to 14.23% in comparison to the conventional reactive divided wall distillation column.
- Open Access
- 13 February 2019
- Published by IntechOpen
Artificial Intelligent-Based Predictive Control of Divided Wall Column
Distillation is the most popular thermal separation technique used in the chemical and petrochemical process industry for the liquid mixture separation. Certainly, the distillation has a plenty of advantages, yet it has a drawback such as more energy requirement. In order to reduce the energy consumption of the conventional distillation column, energy integration is applied within the distillation column. The most important thermally coupled distillation column sequence is the Petlyuk column, which uses two recycle streams. Petlyuk column is a novel design that integrates two distillation columns into one shell, which is known as a dividing wall column. A dividing wall column (DWC) offers the possibility to separate a multicomponent mixture into high-purity products or sharp splits. Artificial neural network predictive controller (ANNPC) has been implemented to control the DWC. The performance of the ANNPC control strategies and the dynamic response of the DWC are investigated in terms of the product composition in the different sections of the dividing wall column for the different persistent disturbances such as feed flow rate, feed compositions, and liquid split factor.
- 13 February 2019
- Published by IntechOpen
Open AccessArtificial Intelligent-Based Predictive Control of Divided Wall Column
Distillation is the most popular thermal separation technique used in the chemical and petrochemical process industry for the liquid mixture separation. Certainly, the distillation has a plenty of advantages, yet it has a drawback such as more energy requirement. In order to reduce the energy consumption of the conventional distillation column, energy integration is applied within the distillation column. The most important thermally coupled distillation column sequence is the Petlyuk column, which uses two recycle streams. Petlyuk column is a novel design that integrates two distillation columns into one shell, which is known as a dividing wall column. A dividing wall column (DWC) offers the possibility to separate a multicomponent mixture into high-purity products or sharp splits. Artificial neural network predictive controller (ANNPC) has been implemented to control the DWC. The performance of the ANNPC control strategies and the dynamic response of the DWC are investigated in terms of the product composition in the different sections of the dividing wall column for the different persistent disturbances such as feed flow rate, feed compositions, and liquid split factor.
- 12 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (27) , 28-36
A review: control of reactive divided wall distillation column
- 12 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (27) , 28-36
A review: control of reactive divided wall distillation column
- 3 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (26) , 12-16
Control of a reactive distillation column for methyl acetate system using Aspen Plus
- 3 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (26) , 12-16
Control of a reactive distillation column for methyl acetate system using Aspen Plus
- 3 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (26) , 6-11
Automation and control of water treatment plant for defluoridation
- 3 December 2016
- Published by ACCENTS in International Journal of Advanced Technology and Engineering Exploration
- Vol. 4 (26) , 6-11
Automation and control of water treatment plant for defluoridation
- 5 September 2015
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 40 (12) , 3393-3407
Simulation-Based Artificial Neural Network Predictive Control of BTX Dividing Wall Column
- 5 September 2015
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 40 (12) , 3393-3407
Simulation-Based Artificial Neural Network Predictive Control of BTX Dividing Wall Column
- Open Access
- 24 December 2014
- Published by Taylor & Francis in Systems Science & Control Engineering
- Vol. 3 (1) , 142-153
Modeling and model predictive control of dividing wall column for separation of Benzene–Toluene-o-Xylene
In this paper, dividing wall column (DWC) has been chosen for a BTX (Benzene–Toluene–o-Xylene) system. A MATLAB® program has been written for nonlinear unsteady-state DWC, which is used in Simulink environment for control of the system by Model Predictive Control (MPC). Compositions of the three products (benzene, toluene, and o-xylene) are indirectly controlled by controlling the corresponding temperatures of the respective tray due to requirement of online analyzer. The temperature of uppermost tray in the rectifying section, stage temperature in the main column corresponding to the side stream withdrawn, and the bottom stage temperature in the stripping section have been chosen in order to maintain the compositions of the three products. The manipulated variables are reflux rate (L0), side-stream flow rate (SSRF), and reboiler heat duty (QB). It has been observed that MPC shows good performance even in the presence of ±10% change in the feed flow rate, feed composition, and liquid split factor in comparison with conventional controllers. The MPC has less settling time (almost 1.5 h) compared with the PI controller (approximately 3–4 h).
- 24 December 2014
- Published by Taylor & Francis in Systems Science & Control Engineering
- Vol. 3 (1) , 142-153
Open AccessModeling and model predictive control of dividing wall column for separation of Benzene–Toluene-o-Xylene
In this paper, dividing wall column (DWC) has been chosen for a BTX (Benzene–Toluene–o-Xylene) system. A MATLAB® program has been written for nonlinear unsteady-state DWC, which is used in Simulink environment for control of the system by Model Predictive Control (MPC). Compositions of the three products (benzene, toluene, and o-xylene) are indirectly controlled by controlling the corresponding temperatures of the respective tray due to requirement of online analyzer. The temperature of uppermost tray in the rectifying section, stage temperature in the main column corresponding to the side stream withdrawn, and the bottom stage temperature in the stripping section have been chosen in order to maintain the compositions of the three products. The manipulated variables are reflux rate (L0), side-stream flow rate (SSRF), and reboiler heat duty (QB). It has been observed that MPC shows good performance even in the presence of ±10% change in the feed flow rate, feed composition, and liquid split factor in comparison with conventional controllers. The MPC has less settling time (almost 1.5 h) compared with the PI controller (approximately 3–4 h).