Lingham V. Pillay
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingham V. Pillay has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Dennis Asante-Sackey
Green Engineering and Sustainability Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban 4001, South Africa
3 shared publications - Emmanuel Kweinor Tetteh
Green Engineering Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Steve Biko, S4 l1, Durban 4001, South Africa
3 shared publications - Sudesh Rathilal
Green Engineering Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Steve Biko, S4 l1, Durban 4001, South Africa
3 shared publications - Cleophas Achisa Mecha
Renewable Energy, Environment, Nanomaterials, and Water Research Group, Department of Chemical and Process Engineering Moi University Eldoret Kenya
1 shared publication - Elorm Obotey Ezugbe
Green Engineering and Sustainability Research Group, Department of Chemical Engineering, Faculty of Engineering and the Built Environment, Durban University of Technology, Durban 4001, South Africa
1 shared publication - Fredrick A.O. Otieno
Institute of Water and Waste Water Treatment, Durban University of Technology, P.O Box 1334, 4001 Durban, South Africa
1 shared publication
Latest Publications
- Open Access
Donnan Membrane Process for the Selective Recovery and Removal of Target Metal Ions—A Mini Review
Membrane-based water purification technologies contribute significantly to water settings, where it is imperative to use low-cost energy sources to make the process economically and technically competitive for large-scale applications. Donnan membrane processes (DMPs) are driven by a potential gradient across an ion exchange membrane and have an advantage over fouling in conventional pressure driven membrane technologies, which are gaining attention. DMP is a removal, recovery and recycling technology that is commonly used for separation, purification and the concentrating of metals in different water and waste streams. In this study, the principle and application of DMP for sustainable wastewater treatment and prospects of chemical remediation are reviewed and discussed. In addition, the separation of dissolved metal ions in wastewater settings without the use of pressure driven gradients or external energy supply membrane technologies is highlighted. Furthermore, DMP distinctive configurations and operational factors are explored and the prospects of integrating them into the wastewater treatment plants are recommended.
Open AccessDonnan Membrane Process for the Selective Recovery and Removal of Target Metal Ions—A Mini Review
Membrane-based water purification technologies contribute significantly to water settings, where it is imperative to use low-cost energy sources to make the process economically and technically competitive for large-scale applications. Donnan membrane processes (DMPs) are driven by a potential gradient across an ion exchange membrane and have an advantage over fouling in conventional pressure driven membrane technologies, which are gaining attention. DMP is a removal, recovery and recycling technology that is commonly used for separation, purification and the concentrating of metals in different water and waste streams. In this study, the principle and application of DMP for sustainable wastewater treatment and prospects of chemical remediation are reviewed and discussed. In addition, the separation of dissolved metal ions in wastewater settings without the use of pressure driven gradients or external energy supply membrane technologies is highlighted. Furthermore, DMP distinctive configurations and operational factors are explored and the prospects of integrating them into the wastewater treatment plants are recommended.
- Open Access
Ion Exchange Dialysis for Aluminium Transport through a Face-Centred Central Composite Design Approach
An ion exchange dialysis (IED) is used in the recovery of aluminium from residue. In this paper, the face-centred central composite design (FC-CCD) of the response surface methodology (RSM) and desirability approach is used for experimental design, modelling and process optimization of a counter flow IED system. The feed concentration, feed flowrate, sweep flowrate and sweep concentration were selected as the process variables, with the Al transport across a Nafion 117 membrane as the target response. A total of 30 experimental runs were conducted with six centre points. The response obtained was analysed by analysis of variance (ANOVA) and fitted to a second-order polynomial model using multiple regression analysis. The actual R2 and standard deviation of the model are 0.9548 and 0.2932, respectively. Depending on the time zone of reference (24 h or 32 h), the highest enrichment of >1.50 was achieved. The designed variables were numerically optimized by applying the desirability function to achieve the maximum Al transport. The optimised condition values were found to be a feed concentration of 1600 ppm, feed flowrate of 61.76%, sweep flowrate of 37.50% and sweep concentration of 0.75 N for the 80% target response at 32 h. Overall, the model can be used to effectively predict Al recovery using the designed system.
Open AccessIon Exchange Dialysis for Aluminium Transport through a Face-Centred Central Composite Design Approach
An ion exchange dialysis (IED) is used in the recovery of aluminium from residue. In this paper, the face-centred central composite design (FC-CCD) of the response surface methodology (RSM) and desirability approach is used for experimental design, modelling and process optimization of a counter flow IED system. The feed concentration, feed flowrate, sweep flowrate and sweep concentration were selected as the process variables, with the Al transport across a Nafion 117 membrane as the target response. A total of 30 experimental runs were conducted with six centre points. The response obtained was analysed by analysis of variance (ANOVA) and fitted to a second-order polynomial model using multiple regression analysis. The actual R2 and standard deviation of the model are 0.9548 and 0.2932, respectively. Depending on the time zone of reference (24 h or 32 h), the highest enrichment of >1.50 was achieved. The designed variables were numerically optimized by applying the desirability function to achieve the maximum Al transport. The optimised condition values were found to be a feed concentration of 1600 ppm, feed flowrate of 61.76%, sweep flowrate of 37.50% and sweep concentration of 0.75 N for the 80% target response at 32 h. Overall, the model can be used to effectively predict Al recovery using the designed system.
- Open Access
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1007-1012
OPTIMIZATION OF DONNAN DIALYSIS FOR ALUM RECOVERY USING BOX BEHNKEN DESIGN
Most potable water treatment plants use aluminium salts as coagulants. This generates a lot of treatment residue which consist of a high amount of aluminium in the residue matrix. Recovery of the alum-coagulant from the potable water treatment for reuse provides direct process and economic advantages. Donnan Dialysis is an ion exchange process that has a proven advantage in coagulant recovery. The commercial application of this process requires bench scale optimization before implementation. In this study, a response surface methodology is applied to the Donnan system. Incorporated with the Box-Behnken experimental matrix, the main and interactional effects of input variables for optimum alum recovery was determined. The Nafion 117 cation exchange membrane was used. Using experimental results, the quadratic statistical module generated was significant with a low P-value (<0.001). The statistical prediction from experimental results shows that high recoveries of 85-96% can be achieved.
- 25 September 2018
- Published by CBU Research Institute in CBU International Conference Proceedings
- Vol. 6, 1007-1012
Open AccessOPTIMIZATION OF DONNAN DIALYSIS FOR ALUM RECOVERY USING BOX BEHNKEN DESIGN
Most potable water treatment plants use aluminium salts as coagulants. This generates a lot of treatment residue which consist of a high amount of aluminium in the residue matrix. Recovery of the alum-coagulant from the potable water treatment for reuse provides direct process and economic advantages. Donnan Dialysis is an ion exchange process that has a proven advantage in coagulant recovery. The commercial application of this process requires bench scale optimization before implementation. In this study, a response surface methodology is applied to the Donnan system. Incorporated with the Box-Behnken experimental matrix, the main and interactional effects of input variables for optimum alum recovery was determined. The Nafion 117 cation exchange membrane was used. Using experimental results, the quadratic statistical module generated was significant with a low P-value (<0.001). The statistical prediction from experimental results shows that high recoveries of 85-96% can be achieved.
- Open Access
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (11) , 4906-4912
Long-term disinfection performance of silver nanoparticles impregnated membranes
There is a major need for effective and sustainable point-of-use (POU) methods for drinking water treatment especially in remote rural areas. We present a study on the effectiveness and sustainability of POU woven fabric microfiltration (WFMF) membranes impregnated with silver nanoparticles (AgNPs) for water disinfection. The critical aspects investigated include: the period of effective disinfection performance; quantification of silver elution from the membranes with time; and the relationship between silver elution and the disinfection efficacy. The disk diffusion and glass bottle tests confirmed the antimicrobial effectiveness of the coated membranes as distinguished from the uncoated membranes which showed no antimicrobial properties under similar conditions. Synthetic feed water (10,000–85,000 Colony Forming Units/100 mL Escherichia coli) was treated for 90 d and no E. coli was detected in permeate for 63 d of continuous operation. Silver elution from the membranes was far below the maximum acceptable limit of 0.1 mg/L for drinking water throughout the period of investigation. To the best of our knowledge, this is the first study to investigate the long-term performance of AgNPs-coated WFMF membranes. The cost effective and extremely robust-coated membranes provided clean and safe drinking water for at least two months of continuous operation.
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (11) , 4906-4912
Open AccessLong-term disinfection performance of silver nanoparticles impregnated membranes
There is a major need for effective and sustainable point-of-use (POU) methods for drinking water treatment especially in remote rural areas. We present a study on the effectiveness and sustainability of POU woven fabric microfiltration (WFMF) membranes impregnated with silver nanoparticles (AgNPs) for water disinfection. The critical aspects investigated include: the period of effective disinfection performance; quantification of silver elution from the membranes with time; and the relationship between silver elution and the disinfection efficacy. The disk diffusion and glass bottle tests confirmed the antimicrobial effectiveness of the coated membranes as distinguished from the uncoated membranes which showed no antimicrobial properties under similar conditions. Synthetic feed water (10,000–85,000 Colony Forming Units/100 mL Escherichia coli) was treated for 90 d and no E. coli was detected in permeate for 63 d of continuous operation. Silver elution from the membranes was far below the maximum acceptable limit of 0.1 mg/L for drinking water throughout the period of investigation. To the best of our knowledge, this is the first study to investigate the long-term performance of AgNPs-coated WFMF membranes. The cost effective and extremely robust-coated membranes provided clean and safe drinking water for at least two months of continuous operation.