Uichiro Mizutani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Uichiro Mizutani has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
H. Sato
Department of Physics, Aichi University of Education, Kariya-shi, Japan
9 shared publicationsM. Inukai
Department of Frontier Materials, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555, Japan
7 shared publicationsE.S. Zijlstra
Theoretical Physics, University of Kassel, 34132 Kassel, Germany
5 shared publicationsE. S. Zijlstra
University of Kassel
2 shared publicationsHirokazu Sato
Department of Physics, Aichi University of Education, Aichi, Japan
2 shared publicationsEeuwe Sieds Zijlstra
Theoretical Physics, University of Kassel, 34132 Kassel, Germany
1 shared publication
Latest Publications
- 4 December 2019
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 100 (4) , 426-455
The Hume-Rothery electron concentration rule studied through interference phenomena in a series of cP12 compounds with either a true gap or pseudogap across the Fermi level
Among binary MX2-type cP12 compounds with space group , there are many compounds with either a true gap or pseudogap at the Fermi level. They are grouped into two with respect to the total valence electrons per atom (VEC), the first being at 14/3, while the second at 20/3. The ratio of the number of itinerant valence electrons per atom e/a over VEC is used as a measure to evaluate a drastic change in the electronic structure from the nearly free electron-like to the tight binding-like. The Full-potential Linearized Augmented Plane Wave (FLAPW) band calculations were performed to study to what extent the value of e/a can be well defined. We claim that the Hume-Rothery electron concentration rule holds for As2Si, P2Si and MgTe2, where the ratio above is higher than 90%. For compounds with M = Fe, Ru and Os and X = S, Se and Te, where the ratio is between 60 and 70%, the discussion based on a large Brillouin zone is still meaningful but the validity of Hume-Rothery electron concentration rule is judged to be marginal. The value of e/a is lowered below 20% and the Hume-Rothery electron concentration rule fails in MgO2 and O2Os.- 4 December 2019
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 100 (4) , 426-455
The Hume-Rothery electron concentration rule studied through interference phenomena in a series of cP12 compounds with either a true gap or pseudogap across the Fermi level
Among binary MX2-type cP12 compounds with space group , there are many compounds with either a true gap or pseudogap at the Fermi level. They are grouped into two with respect to the total valence electrons per atom (VEC), the first being at 14/3, while the second at 20/3. The ratio of the number of itinerant valence electrons per atom e/a over VEC is used as a measure to evaluate a drastic change in the electronic structure from the nearly free electron-like to the tight binding-like. The Full-potential Linearized Augmented Plane Wave (FLAPW) band calculations were performed to study to what extent the value of e/a can be well defined. We claim that the Hume-Rothery electron concentration rule holds for As2Si, P2Si and MgTe2, where the ratio above is higher than 90%. For compounds with M = Fe, Ru and Os and X = S, Se and Te, where the ratio is between 60 and 70%, the discussion based on a large Brillouin zone is still meaningful but the validity of Hume-Rothery electron concentration rule is judged to be marginal. The value of e/a is lowered below 20% and the Hume-Rothery electron concentration rule fails in MgO2 and O2Os.- 31 January 2018
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (14) , 1307-1336
Energy gap formation mechanism through the interference phenomena of electrons in face-centered cubic elements and compounds with the emphasis on half-Heusler and Heusler compounds
Many face-centred cubic elements and compounds with the number of atoms per unit cell N equal to 8, 12 and 16 are known to be stabilised by forming either a band gap or a pseudogap at the Fermi level. They are conveniently expressed as cF8, cF12 and cF16, respectively, in the Pearson symbol. From the cF8 family, we worked on three tetravalent elements C (diamond), Si and Ge, SZn-type AsGa compound and NaCl-type compounds like BiLu, AsSc, etc. From the cF12 family, more than 80 compounds were selected, with a particular emphasis on ABC- and half-Heusler-type ternary equiatomic compounds. Among cF16 compounds, both the Heusler compounds ABC2 and Zintl compounds were studied. We revealed that, regardless of whether or not the transition metal (TM) and/or rare-earth (RE) elements are involved as constituent elements, the energy gap formation mechanism for cF8, cF12 and cF16 compounds can be universally discussed in terms of interference phenomenon of itinerant electrons with set of reciprocal lattice planes with = 8, 11 and 12, where refers to square of the critical reciprocal of lattice vector of an fcc lattice. The number of itinerant electrons per unit cell, e/uc, for all these band gap/pseudogap-bearing compounds is found to fall on a universal line called “3/2-power law” when plotted against on a logarithmic scale. This proves the validity of the fulfilment of the interference condition in conformity with other pseudogap compounds with different crystal symmetries and different sizes of the unit cell reported in literature.
- 31 January 2018
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 98 (14) , 1307-1336
Energy gap formation mechanism through the interference phenomena of electrons in face-centered cubic elements and compounds with the emphasis on half-Heusler and Heusler compounds
Many face-centred cubic elements and compounds with the number of atoms per unit cell N equal to 8, 12 and 16 are known to be stabilised by forming either a band gap or a pseudogap at the Fermi level. They are conveniently expressed as cF8, cF12 and cF16, respectively, in the Pearson symbol. From the cF8 family, we worked on three tetravalent elements C (diamond), Si and Ge, SZn-type AsGa compound and NaCl-type compounds like BiLu, AsSc, etc. From the cF12 family, more than 80 compounds were selected, with a particular emphasis on ABC- and half-Heusler-type ternary equiatomic compounds. Among cF16 compounds, both the Heusler compounds ABC2 and Zintl compounds were studied. We revealed that, regardless of whether or not the transition metal (TM) and/or rare-earth (RE) elements are involved as constituent elements, the energy gap formation mechanism for cF8, cF12 and cF16 compounds can be universally discussed in terms of interference phenomenon of itinerant electrons with set of reciprocal lattice planes with = 8, 11 and 12, where refers to square of the critical reciprocal of lattice vector of an fcc lattice. The number of itinerant electrons per unit cell, e/uc, for all these band gap/pseudogap-bearing compounds is found to fall on a universal line called “3/2-power law” when plotted against on a logarithmic scale. This proves the validity of the fulfilment of the interference condition in conformity with other pseudogap compounds with different crystal symmetries and different sizes of the unit cell reported in literature.
- Open Access
The Physics of the Hume-Rothery Electron Concentration Rule
For a long time we have shared the belief that the physics of the Hume-Rothery electron concentration rule can be deepened only through thorough investigation of the interference phenomenon of itinerant electrons with a particular set of lattice planes, regardless of whether d-states are involved near the Fermi level or not. For this purpose, we have developed the FLAPW-Fourier theory (Full potential Linearized Augmented Plane Wave), which is capable of determining the square of the Fermi diameter, , and the number of itinerant electrons per atom, e/a, as well as the set of lattice planes participating in the interference phenomenon. By determining these key parameters, we could test the interference condition and clarify how it contributes to the formation of a pseudogap at the Fermi level. Further significant progress has been made to allow us to equally handle transition metal (TM) elements and their compounds. A method of taking the center of gravity energy for energy distribution of electrons with a given electronic state has enabled us to eliminate the d-band anomaly and to determine effective , and e/a, even for systems involving the d-band or an energy gap across the Fermi level. The e/a values for 54 elements covering from Group 1 up to Group 16 in the Periodic Table, including 3d-, 4d- and 5d-elements, were determined in a self-consistent manner. The FLAPW-Fourier theory faces its limit only for elements in Group 17 like insulating solids Cl and their compounds, although the value of e/a can be determined without difficulty when Br becomes metallic under high pressures. The origin of a pseudogap at the Fermi level for a large number of compounds has been successfully interpreted in terms of the interference condition, regardless of the bond-types involved in the van Arkel-Ketelaar triangle map.Open AccessThe Physics of the Hume-Rothery Electron Concentration Rule
For a long time we have shared the belief that the physics of the Hume-Rothery electron concentration rule can be deepened only through thorough investigation of the interference phenomenon of itinerant electrons with a particular set of lattice planes, regardless of whether d-states are involved near the Fermi level or not. For this purpose, we have developed the FLAPW-Fourier theory (Full potential Linearized Augmented Plane Wave), which is capable of determining the square of the Fermi diameter, , and the number of itinerant electrons per atom, e/a, as well as the set of lattice planes participating in the interference phenomenon. By determining these key parameters, we could test the interference condition and clarify how it contributes to the formation of a pseudogap at the Fermi level. Further significant progress has been made to allow us to equally handle transition metal (TM) elements and their compounds. A method of taking the center of gravity energy for energy distribution of electrons with a given electronic state has enabled us to eliminate the d-band anomaly and to determine effective , and e/a, even for systems involving the d-band or an energy gap across the Fermi level. The e/a values for 54 elements covering from Group 1 up to Group 16 in the Periodic Table, including 3d-, 4d- and 5d-elements, were determined in a self-consistent manner. The FLAPW-Fourier theory faces its limit only for elements in Group 17 like insulating solids Cl and their compounds, although the value of e/a can be determined without difficulty when Br becomes metallic under high pressures. The origin of a pseudogap at the Fermi level for a large number of compounds has been successfully interpreted in terms of the interference condition, regardless of the bond-types involved in the van Arkel-Ketelaar triangle map. - 28 August 2016
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 96 (29) , 3075-3096
Determination of electrons per atom ratio for transition metal compounds studied by FLAPW-Fourier calculations
Among 54 elements in the periodic table, whose electrons per atom ratio e/a has been consistently determined within the framework of the Full-potential Linearised Augmented Plane Wave-Fourier theory, the present authors have claimed the need of properly differentiating two distinct e/a values for Ca in the Group 2 and for Sc and Y in Group 3 in the periodic table, depending on whether they are dissolved in transition metal (TM) (TM from Group 4–10) matrix or in non-TM (Al, Zn, etc.) matrix. It is also emphasised that this unique alloying environment effects are essentially absent in other elements Sr and Ba in Group 2 and La in Group 3. We could also show that the linear interpolation rule stating that e/a of any binary compounds is estimated by taking a composition average of those of constituent elements, holds within the accuracy of ±20%, even when elements in Groups 2 and 3 are involved. The Hume-Rothery electron concentration rule for Laves compounds with Pearson symbol cF24 has been successfully elucidated by classifying them into subgroups with respect to square of critical reciprocal lattice vector serving as a key parameter in the interference condition.
- 28 August 2016
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 96 (29) , 3075-3096
Determination of electrons per atom ratio for transition metal compounds studied by FLAPW-Fourier calculations
Among 54 elements in the periodic table, whose electrons per atom ratio e/a has been consistently determined within the framework of the Full-potential Linearised Augmented Plane Wave-Fourier theory, the present authors have claimed the need of properly differentiating two distinct e/a values for Ca in the Group 2 and for Sc and Y in Group 3 in the periodic table, depending on whether they are dissolved in transition metal (TM) (TM from Group 4–10) matrix or in non-TM (Al, Zn, etc.) matrix. It is also emphasised that this unique alloying environment effects are essentially absent in other elements Sr and Ba in Group 2 and La in Group 3. We could also show that the linear interpolation rule stating that e/a of any binary compounds is estimated by taking a composition average of those of constituent elements, holds within the accuracy of ±20%, even when elements in Groups 2 and 3 are involved. The Hume-Rothery electron concentration rule for Laves compounds with Pearson symbol cF24 has been successfully elucidated by classifying them into subgroups with respect to square of critical reciprocal lattice vector serving as a key parameter in the interference condition.
- 22 December 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 54 (3) , 930-946
Electrons per Atom Ratio Determination and Hume-Rothery Electron Concentration Rule for P-Based Polar Compounds Studied by FLAPW–Fourier Calculations
The extent to which reliable electrons per atom ratio, e/a, are determined and the validity of the Hume-Rothery stabilization mechanism are ensured upon increasing ionicity are studied by applying first-principles full potential linearized augmented plane wave (FLAPW)–Fourier band calculations to as many as 59 binary compounds formed by adding elements from periods 2–6 to phosphorus in group 15 of the Periodic Table. Van Arkel-Ketelaar triangle maps were constructed both by using the Allen electronegativity data and by using an energy difference between the center-of-gravity energies of FLAPW-derived s and p partial densities of states (DOSs) for the equiatomic compounds studied. The determination of e/a and the test of the interference condition, both of which play a key role in the Hume-Rothery stabilization mechanism, were reliably made for all intermetallic compounds, as long as the ionicity is less than 50%. In the A–P (A = Li, Na, K, Rb, and Cs) compounds with ionicity exceeding 50%, however, e/a determination becomes unstable, as reflected in its P concentration dependence. New Hume-Rothery electron concentration rules were theoretically found in two families of polar compounds: skutterudite compounds TMP3, TMAs3, and TMSb3 (TM = Co, Ni, Rh, and Ir; cI32) with e/a = 4.34 and TM3P (TM = Cr, Mn, Fe, and Ni; tI32) with e/a = 2.20.
- 22 December 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 54 (3) , 930-946
Electrons per Atom Ratio Determination and Hume-Rothery Electron Concentration Rule for P-Based Polar Compounds Studied by FLAPW–Fourier Calculations
The extent to which reliable electrons per atom ratio, e/a, are determined and the validity of the Hume-Rothery stabilization mechanism are ensured upon increasing ionicity are studied by applying first-principles full potential linearized augmented plane wave (FLAPW)–Fourier band calculations to as many as 59 binary compounds formed by adding elements from periods 2–6 to phosphorus in group 15 of the Periodic Table. Van Arkel-Ketelaar triangle maps were constructed both by using the Allen electronegativity data and by using an energy difference between the center-of-gravity energies of FLAPW-derived s and p partial densities of states (DOSs) for the equiatomic compounds studied. The determination of e/a and the test of the interference condition, both of which play a key role in the Hume-Rothery stabilization mechanism, were reliably made for all intermetallic compounds, as long as the ionicity is less than 50%. In the A–P (A = Li, Na, K, Rb, and Cs) compounds with ionicity exceeding 50%, however, e/a determination becomes unstable, as reflected in its P concentration dependence. New Hume-Rothery electron concentration rules were theoretically found in two families of polar compounds: skutterudite compounds TMP3, TMAs3, and TMSb3 (TM = Co, Ni, Rh, and Ir; cI32) with e/a = 4.34 and TM3P (TM = Cr, Mn, Fe, and Ni; tI32) with e/a = 2.20.
- 7 June 2014
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 94 (22) , 2571-2594
e/aclassification of Hume–Rothery Rhombic Triacontahedron-type approximants based on all-electron density functional theory calculations
There are three key electronic parameters in elucidating the physics behind the Hume–Rothery electron concentration rule: the square of the Fermi diameter (2kF)2, the square of the critical reciprocal lattice vector and the electron concentration parameter or the number of itinerant electrons per atom e/a. We have reliably determined these three parameters for 10 Rhombic Triacontahedron-type 2/1–2/1–2/1 (N = 680) and 1/1–1/1–1/1 (N = 160–162) approximants by making full use of the full-potential linearized augmented plane wave-Fourier band calculations based on all-electron density-functional theory. We revealed that the 2/1–2/1–2/1 approximants Al13Mg27Zn45 and Na27Au27Ga31 belong to two different sub-groups classified in terms of equal to 126 and 109 and could explain why they take different e/a values of 2.13 and 1.76, respectively. Among eight 1/1–1/1–1/1 approximants Al3Mg4Zn3, Al9Mg8Ag3, Al21Li13Cu6, Ga21Li13Cu6, Na26Au24Ga30, Na26Au37Ge18, Na26Au37Sn18 and Na26Cd40Pb6, the first two, the second two and the last four compounds were classified into three sub-groups with = 50, 46 and 42; and were claimed to obey the e/a = 2.30, 2.10–2.15 and 1.70–1.80 rules, respectively.
- 7 June 2014
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 94 (22) , 2571-2594
e/aclassification of Hume–Rothery Rhombic Triacontahedron-type approximants based on all-electron density functional theory calculations
There are three key electronic parameters in elucidating the physics behind the Hume–Rothery electron concentration rule: the square of the Fermi diameter (2kF)2, the square of the critical reciprocal lattice vector and the electron concentration parameter or the number of itinerant electrons per atom e/a. We have reliably determined these three parameters for 10 Rhombic Triacontahedron-type 2/1–2/1–2/1 (N = 680) and 1/1–1/1–1/1 (N = 160–162) approximants by making full use of the full-potential linearized augmented plane wave-Fourier band calculations based on all-electron density-functional theory. We revealed that the 2/1–2/1–2/1 approximants Al13Mg27Zn45 and Na27Au27Ga31 belong to two different sub-groups classified in terms of equal to 126 and 109 and could explain why they take different e/a values of 2.13 and 1.76, respectively. Among eight 1/1–1/1–1/1 approximants Al3Mg4Zn3, Al9Mg8Ag3, Al21Li13Cu6, Ga21Li13Cu6, Na26Au24Ga30, Na26Au37Ge18, Na26Au37Sn18 and Na26Cd40Pb6, the first two, the second two and the last four compounds were classified into three sub-groups with = 50, 46 and 42; and were claimed to obey the e/a = 2.30, 2.10–2.15 and 1.70–1.80 rules, respectively.
- 22 July 2013
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 93 (24) , 3353-3390
e/adetermination for 4d- and 5d-transition metal elements and their intermetallic compounds with Mg, Al, Zn, Cd and In
The present work is devoted to the determination of the effective electrons per atom ratio e/a by means of first-principles full-potential linearized augmented plane wave-Fourier method for elements from Rb to Ag in Period 5 and from Cs to Au in Period 6 of the periodic table and is regarded as a continuation of the preceding work done for elements from K to Cu in Period 4. The value of e/a was determined by reading off the square of the Fermi diameter, from the dispersion relation for electrons outside the Muffin-Tin spheres. A straightforward reading of the ordinate at the Fermi level, i.e. local reading method was validated for Rb and Cs in Group 1, Sr in Group 2, Y in Group 3, Pd and Pt in Group 10 and Ag and Au in Group 11. Instead, the nearly free electron (NFE) method was found to be indispensable for TM elements from Zr to Rh in Period 5 and those from Ba to Ir in Period 6. The composition dependence of e/a values for intermetallic compounds in X–TM (X = Mg, Al, Zn, Cd and In) alloy systems was also studied. The new Hume–Rothery electron concentration rule was established by constructing e/uc, the number of electrons per unit cell, vs. square of critical reciprocal lattice vector, , diagram for structurally complex metallic alloys having a pseudogap at the Fermi level. A proper use of either the local reading- or the NFE-e/a for the elements as indicated above is found to be essential.
- 22 July 2013
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 93 (24) , 3353-3390
e/adetermination for 4d- and 5d-transition metal elements and their intermetallic compounds with Mg, Al, Zn, Cd and In
The present work is devoted to the determination of the effective electrons per atom ratio e/a by means of first-principles full-potential linearized augmented plane wave-Fourier method for elements from Rb to Ag in Period 5 and from Cs to Au in Period 6 of the periodic table and is regarded as a continuation of the preceding work done for elements from K to Cu in Period 4. The value of e/a was determined by reading off the square of the Fermi diameter, from the dispersion relation for electrons outside the Muffin-Tin spheres. A straightforward reading of the ordinate at the Fermi level, i.e. local reading method was validated for Rb and Cs in Group 1, Sr in Group 2, Y in Group 3, Pd and Pt in Group 10 and Ag and Au in Group 11. Instead, the nearly free electron (NFE) method was found to be indispensable for TM elements from Zr to Rh in Period 5 and those from Ba to Ir in Period 6. The composition dependence of e/a values for intermetallic compounds in X–TM (X = Mg, Al, Zn, Cd and In) alloy systems was also studied. The new Hume–Rothery electron concentration rule was established by constructing e/uc, the number of electrons per unit cell, vs. square of critical reciprocal lattice vector, , diagram for structurally complex metallic alloys having a pseudogap at the Fermi level. A proper use of either the local reading- or the NFE-e/a for the elements as indicated above is found to be essential.
- 28 May 2013
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 93 (22) , 3029-3061
NFEapproximation for the e/a determination for 3d-transition metal elements and their intermetallic compounds with Al and Zn
First-principles full-potential linearized augmented plane wave (FLAPW) band calculations with subsequent FLAPW-Fourier analyses have been performed for elements from K to Cu in period 4 of the periodic table to determine the effective electrons per atom ratio (e/a). For the series of 3d-transition metals (TM), the determination of the square of the Fermi diameter , from which e/a is derived, has been recognized not to be straightforward because of the presence of a huge anomaly associated with the TM-d states across the Fermi level in the energy dispersion relation for electrons outside the muffin-tin sphere. The nearly free electron (NFE) approximation is newly devised to circumvent this difficulty. The centre of gravity energy is calculated from the energy distribution of the square of the Fourier coefficients for the FLAPW state . The NFE dispersion relation is constructed for the set of and in combination with the tetrahedron method. The resulting e/a values are distributed over positive numbers in the vicinity of unity for elements from Ti to Co. Instead, the e/a values for the early elements K, Ca and Sc and the late TM elements Ni and Cu were determined to be close to one, two, three, 0.50 and unity, respectively, using our previously designed local reading method. In addition, the composition dependence of e/a values for intermetallic compounds in X-TM (X = Al and Zn) alloy systems was studied to justify an appropriate choice between the local reading and NFE methods for respective elements.
- 28 May 2013
- Published by Taylor & Francis in Philosophical Magazine
- Vol. 93 (22) , 3029-3061
NFEapproximation for the e/a determination for 3d-transition metal elements and their intermetallic compounds with Al and Zn
First-principles full-potential linearized augmented plane wave (FLAPW) band calculations with subsequent FLAPW-Fourier analyses have been performed for elements from K to Cu in period 4 of the periodic table to determine the effective electrons per atom ratio (e/a). For the series of 3d-transition metals (TM), the determination of the square of the Fermi diameter , from which e/a is derived, has been recognized not to be straightforward because of the presence of a huge anomaly associated with the TM-d states across the Fermi level in the energy dispersion relation for electrons outside the muffin-tin sphere. The nearly free electron (NFE) approximation is newly devised to circumvent this difficulty. The centre of gravity energy is calculated from the energy distribution of the square of the Fourier coefficients for the FLAPW state . The NFE dispersion relation is constructed for the set of and in combination with the tetrahedron method. The resulting e/a values are distributed over positive numbers in the vicinity of unity for elements from Ti to Co. Instead, the e/a values for the early elements K, Ca and Sc and the late TM elements Ni and Cu were determined to be close to one, two, three, 0.50 and unity, respectively, using our previously designed local reading method. In addition, the composition dependence of e/a values for intermetallic compounds in X-TM (X = Al and Zn) alloy systems was studied to justify an appropriate choice between the local reading and NFE methods for respective elements.
- 1 January 2013
- Published by Springer Nature
- p. 101-107
Hume–Rothery Stabilization Mechanism in Tsai-Type Cd6Ca Approximant and e/a Determination of Ca and Cd Elements in the Periodic Table
- 1 January 2013
- Published by Springer Nature
- p. 101-107
Hume–Rothery Stabilization Mechanism in Tsai-Type Cd6Ca Approximant and e/a Determination of Ca and Cd Elements in the Periodic Table