Zhenhu Xiong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Zhenhu Xiong has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Jinmiao Zhang
School of Environmental and Municipal Engineering, Tianjin Chengjian university, Tianjin, 300384, China
2 shared publicationsLei Wang
School of Environmental Science and Engineering, Tianjin University, Tianjin, 300072, China
2 shared publicationsChen Li
School of Environmental and Municipal Engineering, Tianjin Chengjian University, Tianjin 300384, P. R. China
1 shared publication- Chen Li
School of Environmental and Municipal Engineering, Tianjin Chengjian University, Tianjin 300384, P. R. China
1 shared publication - Chun-Sheng Wu
School of Environmental and Municipal Engineering, Tianjin Chengjian University, Tianjin 300384, P. R. China
1 shared publication Chunsheng Wu
School of Environmental and Municipal Engineering, Tianjin Chengjian University, Tianjin 300384, P. R. China
1 shared publication
Latest Publications
- 18 April 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (16) , 14198-14206
Selective adsorption of Pb (II) over the zinc-based MOFs in aqueous solution-kinetics, isotherms, and the ion exchange mechanism
Two series of metal–organic frameworks (MOFs) with similar formula units but different central metal ions (M) or organic linkers (L), M-BDC (BDC = terephthalate, M = Zn, Zr, Cr, or Fe), or Zn-L (L = imidazolate-2-methyl, BDC, BDC-NH2), were prepared and employed as the receptors for adsorption lead ions. It was found that the Zn-BDC exhibited a much higher adsorption capacity than the other M-BDC series with various metal ions which have very closely low capacities at same conditions. Furthermore, the Zn-L (L = imidazolate-2-methyl, BDC, BDC-NH2) still have highly efficient adsorption capacity of lead ions, although the adsorption capacity varies with different ligand, as well as the adsorption rate and the equilibrium pH of the solution. This significant high adsorption over Zn-L, different from other M-BDC series with various metal ions (Zr, Cr, or Fe), can be explained by ion exchange between the central metal ions of Zn-L and lead ion in solution. Based on the analysis of FT-IR, X-ray diffraction pattern, the nitrogen adsorption isotherms, the zeta potentials, and the results, a plausible adsorption mechanism is proposed. When equivalent Zn-L were added to equal volume of aqueous solution with different concentration of lead ion, the content of zinc ion in the solution increases with the increase of the initial concentration of lead ions. The new findings could provide a potential way to fabricate new metal organic frameworks with high and selective capacities of the heavy metal ions.
- 18 April 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 24 (16) , 14198-14206
Selective adsorption of Pb (II) over the zinc-based MOFs in aqueous solution-kinetics, isotherms, and the ion exchange mechanism
Two series of metal–organic frameworks (MOFs) with similar formula units but different central metal ions (M) or organic linkers (L), M-BDC (BDC = terephthalate, M = Zn, Zr, Cr, or Fe), or Zn-L (L = imidazolate-2-methyl, BDC, BDC-NH2), were prepared and employed as the receptors for adsorption lead ions. It was found that the Zn-BDC exhibited a much higher adsorption capacity than the other M-BDC series with various metal ions which have very closely low capacities at same conditions. Furthermore, the Zn-L (L = imidazolate-2-methyl, BDC, BDC-NH2) still have highly efficient adsorption capacity of lead ions, although the adsorption capacity varies with different ligand, as well as the adsorption rate and the equilibrium pH of the solution. This significant high adsorption over Zn-L, different from other M-BDC series with various metal ions (Zr, Cr, or Fe), can be explained by ion exchange between the central metal ions of Zn-L and lead ion in solution. Based on the analysis of FT-IR, X-ray diffraction pattern, the nitrogen adsorption isotherms, the zeta potentials, and the results, a plausible adsorption mechanism is proposed. When equivalent Zn-L were added to equal volume of aqueous solution with different concentration of lead ion, the content of zinc ion in the solution increases with the increase of the initial concentration of lead ions. The new findings could provide a potential way to fabricate new metal organic frameworks with high and selective capacities of the heavy metal ions.
- 14 October 2016
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 61 (11) , 3868-3876
Selectivity Adsorptive Mechanism of Different Nitrophenols on UIO-66 and UIO-66-NH2 in Aqueous Solution
- 14 October 2016
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 61 (11) , 3868-3876
Selectivity Adsorptive Mechanism of Different Nitrophenols on UIO-66 and UIO-66-NH2 in Aqueous Solution
- 9 November 2015
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 37 (5) , 613-624
Multi-Walled Carbon Nanotubes and Powder-Activated Carbon Adsorbents for the Removal of Nitrofurazone from Aqueous Solution
Multi-walled carbon nanotubes (MWCNTs) and powder-activated carbon (PAC) were used as adsorbents for adsorption of nitrofurazone, a veterinary medicine, from aqueous solutions. The adsorbents were characterized using FTIR transform infrared spectroscopy, N2 adsorption/desorption isotherms, and scanning electron microscopy. The effects of initial pH, contact time, and temperature on adsorption capacity of the adsorbents were investigated. For MWCNT and PAC, the result showed that when the pH value was ranged from 2.0 to 10.0, the dosage of adsorbent was 0.02 g, and adsorptive time is 4 hours, the removal efficiencies for nitrofurazone were 96.8% and 94.7%, and the corresponding maximum capacities at 283 K were close to 50.8 mgg−1 and 59.9 mgg−1, respectively. For nitrofurazone, the pseudo-second-order kinetic model provided the best fit to the experimental data. The Boyd model indicated the mechanism for adsorption processes was mainly external mass transfer, while the effect of particle internal diffusion was relatively weak. Liu model could best fit to the experimental data of isothermal adsorption. The data of adsorption thermodynamics showed that the adsorption process was spontaneous.
- 9 November 2015
- Published by Taylor & Francis in Journal of Dispersion Science and Technology
- Vol. 37 (5) , 613-624
Multi-Walled Carbon Nanotubes and Powder-Activated Carbon Adsorbents for the Removal of Nitrofurazone from Aqueous Solution
Multi-walled carbon nanotubes (MWCNTs) and powder-activated carbon (PAC) were used as adsorbents for adsorption of nitrofurazone, a veterinary medicine, from aqueous solutions. The adsorbents were characterized using FTIR transform infrared spectroscopy, N2 adsorption/desorption isotherms, and scanning electron microscopy. The effects of initial pH, contact time, and temperature on adsorption capacity of the adsorbents were investigated. For MWCNT and PAC, the result showed that when the pH value was ranged from 2.0 to 10.0, the dosage of adsorbent was 0.02 g, and adsorptive time is 4 hours, the removal efficiencies for nitrofurazone were 96.8% and 94.7%, and the corresponding maximum capacities at 283 K were close to 50.8 mgg−1 and 59.9 mgg−1, respectively. For nitrofurazone, the pseudo-second-order kinetic model provided the best fit to the experimental data. The Boyd model indicated the mechanism for adsorption processes was mainly external mass transfer, while the effect of particle internal diffusion was relatively weak. Liu model could best fit to the experimental data of isothermal adsorption. The data of adsorption thermodynamics showed that the adsorption process was spontaneous.
- 28 October 2015
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 60 (11) , 3414-3422
The Strengthening Role of the Amino Group in Metal–Organic Framework MIL-53 (Al) for Methylene Blue and Malachite Green Dye Adsorption
- 28 October 2015
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 60 (11) , 3414-3422
The Strengthening Role of the Amino Group in Metal–Organic Framework MIL-53 (Al) for Methylene Blue and Malachite Green Dye Adsorption
- 21 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (100) , 82127-82137
Zeolitic imidazolate metal organic framework ZIF-8 with ultra-high adsorption capacity bound tetracycline in aqueous solution
ZIF-8 nanoparticles were prepared with a convenient method at room temperature. The morphology and components of the ZIF-8 were characterized by scanning electron microscopy (SEM), powder X-ray diffraction spectroscopy (PXRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR) and zeta potential analysis. The ZIF-8 nanoparticles were relatively stable under neutral and alkaline solutions, while their structure easily collapsed partially in the strong acidic aqueous solution. The adsorption kinetics and isotherms of ZIF-8 for tetracycline were evaluated in detail. The effects of key parameters such as pH, contact time, temperature and ionic strength on the adsorption of tetracycline were studied. The data on the adsorption of tetracycline on the ZIF-8 nanoparticles fitted well to the pseudo-second-order kinetics model, while the adsorption isotherm data can be explained respectively by the Langmuir isothermal model and the Freundlich isotherm model to varying degrees. The equilibrium quantity of tetracycline on ZIF-8 obtained in adsorption kinetic studies was 124.6 mg g−1 at 25 °C, while the value calculated by the Langmuir isotherm model was above 1000 mg g−1 at the same temperature. This implied that the adsorption capacity of ZIF-8 to tetracycline can be improved to a large extent. The analysis of the adsorption mechanism showed that electrostatic attraction and π–π stacking interaction both played crucial roles in the adsorption process. Regeneration experiments indicated that the used adsorbent still showed excellent applicability after four rounds of recycling.
- 21 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (100) , 82127-82137
Zeolitic imidazolate metal organic framework ZIF-8 with ultra-high adsorption capacity bound tetracycline in aqueous solution
ZIF-8 nanoparticles were prepared with a convenient method at room temperature. The morphology and components of the ZIF-8 were characterized by scanning electron microscopy (SEM), powder X-ray diffraction spectroscopy (PXRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR) and zeta potential analysis. The ZIF-8 nanoparticles were relatively stable under neutral and alkaline solutions, while their structure easily collapsed partially in the strong acidic aqueous solution. The adsorption kinetics and isotherms of ZIF-8 for tetracycline were evaluated in detail. The effects of key parameters such as pH, contact time, temperature and ionic strength on the adsorption of tetracycline were studied. The data on the adsorption of tetracycline on the ZIF-8 nanoparticles fitted well to the pseudo-second-order kinetics model, while the adsorption isotherm data can be explained respectively by the Langmuir isothermal model and the Freundlich isotherm model to varying degrees. The equilibrium quantity of tetracycline on ZIF-8 obtained in adsorption kinetic studies was 124.6 mg g−1 at 25 °C, while the value calculated by the Langmuir isotherm model was above 1000 mg g−1 at the same temperature. This implied that the adsorption capacity of ZIF-8 to tetracycline can be improved to a large extent. The analysis of the adsorption mechanism showed that electrostatic attraction and π–π stacking interaction both played crucial roles in the adsorption process. Regeneration experiments indicated that the used adsorbent still showed excellent applicability after four rounds of recycling.
- 13 January 2015
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 22 (12) , 9080-9089
Adsorption/desorption and bioavailability of methamphetamine in simulated gastrointestinal fluids under the presence of multiwalled carbon nanotubes
Adsorption/desorption and desorption hysteresis of methamphetamine (MMA) on carbon nanotubes (CNTs) as well as bioavailability of MMA were studied in simulated gastrointestinal fluids and background fluids. Adsorption of MMA in near-neutral (weak alkaline) intestinal fluid was enhanced, while adsorption of MMA on CNTs in acid gastric fluid was suppressed. Desorption of MMA is divided into fast and slow stages, and fast desorption conducting in the gastric fluid lasted shortly and slow desorption occurred in intestinal fluid; pepsin can enhance the release of MMA in gastrointestinal system. While, the acidic condition in gastric fluid is the main factor which causes the release of MMA. The amount of MMA released from CNTs in different fluids follows the order gastric > background (pH = 2.0) > intestinal (fed) > intestinal (fasted) > background (pH = 7.5). These findings in the simulated gastrointestinal system suggest that the release of MMA from CNTs could be promoted by biomacromolecules (such as pepsin and bile salts in digestive tract); thus, the bioavailability of MMA is enhanced.
- 13 January 2015
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 22 (12) , 9080-9089
Adsorption/desorption and bioavailability of methamphetamine in simulated gastrointestinal fluids under the presence of multiwalled carbon nanotubes
Adsorption/desorption and desorption hysteresis of methamphetamine (MMA) on carbon nanotubes (CNTs) as well as bioavailability of MMA were studied in simulated gastrointestinal fluids and background fluids. Adsorption of MMA in near-neutral (weak alkaline) intestinal fluid was enhanced, while adsorption of MMA on CNTs in acid gastric fluid was suppressed. Desorption of MMA is divided into fast and slow stages, and fast desorption conducting in the gastric fluid lasted shortly and slow desorption occurred in intestinal fluid; pepsin can enhance the release of MMA in gastrointestinal system. While, the acidic condition in gastric fluid is the main factor which causes the release of MMA. The amount of MMA released from CNTs in different fluids follows the order gastric > background (pH = 2.0) > intestinal (fed) > intestinal (fasted) > background (pH = 7.5). These findings in the simulated gastrointestinal system suggest that the release of MMA from CNTs could be promoted by biomacromolecules (such as pepsin and bile salts in digestive tract); thus, the bioavailability of MMA is enhanced.
- 1 June 2013
- Vol. 34 (6) , 2240-8
[Removal of bisphenol A in aqueous solutions by core-shell magnetic molecularly imprinted polymers].
This paper reports the preparation of surface-imprinted polymer core-shell magnetic material as adsorbent for separating bisphenol A in the environmental water. The adsorbent prepared easily achieved the magnetic separation under an external magnetic field. The structures of the resulting composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) analysis. The adsorption selectivity of Fe3O4@SiO2-MIPs for bisphenol A was demonstrated by equilibrium rebinding experiments and Scatchard analysis. Freundlich adsorption model can well describe the adsorption isothermals of bisphenol A with the correlation coefficients R2 = 0.995 2. The dynamics of bisphenol A adsorbed by Fe3O4@SiO2-MIPs can be well described by the pseudo second-order model (R2 = 0.999 9). In the solutions with weak acidity, the Fe3O4@SiO2-MIPs showed higher removal rate and rapid adsorption dynamical process, requiring only 40 min to reach a removal rate of 90%; the presence of ions did not affect the adsorption rate of bisphenol A; when compared with the non-imprinted polymer (Fe3O4@SiO2-NIPs), the Fe3O4@SiO2-MIPs showed outstanding affinity toward bisphenol A; the performance of the resulting composites (Fe3O4@SiO2-MIPs) without obvious deterioration was demonstrated in seven repeated cycles.
- 1 June 2013
- Vol. 34 (6) , 2240-8
[Removal of bisphenol A in aqueous solutions by core-shell magnetic molecularly imprinted polymers].
This paper reports the preparation of surface-imprinted polymer core-shell magnetic material as adsorbent for separating bisphenol A in the environmental water. The adsorbent prepared easily achieved the magnetic separation under an external magnetic field. The structures of the resulting composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) analysis. The adsorption selectivity of Fe3O4@SiO2-MIPs for bisphenol A was demonstrated by equilibrium rebinding experiments and Scatchard analysis. Freundlich adsorption model can well describe the adsorption isothermals of bisphenol A with the correlation coefficients R2 = 0.995 2. The dynamics of bisphenol A adsorbed by Fe3O4@SiO2-MIPs can be well described by the pseudo second-order model (R2 = 0.999 9). In the solutions with weak acidity, the Fe3O4@SiO2-MIPs showed higher removal rate and rapid adsorption dynamical process, requiring only 40 min to reach a removal rate of 90%; the presence of ions did not affect the adsorption rate of bisphenol A; when compared with the non-imprinted polymer (Fe3O4@SiO2-NIPs), the Fe3O4@SiO2-MIPs showed outstanding affinity toward bisphenol A; the performance of the resulting composites (Fe3O4@SiO2-MIPs) without obvious deterioration was demonstrated in seven repeated cycles.
- 1 January 2013
- Published by Shanghai Institute of Organic Chemistry in Acta Chimica Sinica
- Vol. 71 (04) , 625-633
Adsorption Behavior of Three Nitroimidazoles in Aqueous Solutions to Magnetic-modified Multi-walled Carbon Nanotubes
- 1 January 2013
- Published by Shanghai Institute of Organic Chemistry in Acta Chimica Sinica
- Vol. 71 (04) , 625-633
Adsorption Behavior of Three Nitroimidazoles in Aqueous Solutions to Magnetic-modified Multi-walled Carbon Nanotubes
- 1 October 2010
- Vol. 31 (10) , 2336-43
[Degradation of the mixed pharmaceuticals with low concentration in aqueous by solar/ferrioxalate system and process evaluation through toxicity bioassay].
Under the sunlight irradiation, the four common trace pollutants such as metronidazole, diclofenac, sulfamethoxazole and ibuprofen were degradated and mineralized by the hydroxyl radical (*OH) generated from decomposition of H2O2 catalyzed by ferrioxalate (FeOx), and the toxicity of the water solution containing degradated products and intermediates were evaluated. The factors affecting the removal of the TOC, such as the initial concentration of H2O2, FeOx, and the pH, were investigated through an indicator of total organic carbon. The disappearing rate of pollutants in aqueous solution was explained according to the chemical structure of the pharmaceuticals; the biotoxicity of the pharmaceuticals and the intermediates were evaluated by EC50 value of pharmaceutical solution to the Chlorella. The appropriate operating conditions were achieved at pH 3 with initial concentrations of 300 mg x L(-1) H2O2 and 75 mg x L(-1) FeOx at the conditions such as the initial concentration of four drugs were 20 mg x L(-1), respectively. The order of the degradation rate for the pharmaceuticals is metronidazole > ibuprofen > sulfamethoxazole > diclofenac. During the reaction, the biological toxicity increases with time and then decreases rapidly, along with appearance and disappearance of intermediates. Finally, a model on reaction mechanism was proposed, where Solar/FeOx/H2O2 system was used for the degradation of the pharmaceuticals with low concentration in aqueous solution.
- 1 October 2010
- Vol. 31 (10) , 2336-43
[Degradation of the mixed pharmaceuticals with low concentration in aqueous by solar/ferrioxalate system and process evaluation through toxicity bioassay].
Under the sunlight irradiation, the four common trace pollutants such as metronidazole, diclofenac, sulfamethoxazole and ibuprofen were degradated and mineralized by the hydroxyl radical (*OH) generated from decomposition of H2O2 catalyzed by ferrioxalate (FeOx), and the toxicity of the water solution containing degradated products and intermediates were evaluated. The factors affecting the removal of the TOC, such as the initial concentration of H2O2, FeOx, and the pH, were investigated through an indicator of total organic carbon. The disappearing rate of pollutants in aqueous solution was explained according to the chemical structure of the pharmaceuticals; the biotoxicity of the pharmaceuticals and the intermediates were evaluated by EC50 value of pharmaceutical solution to the Chlorella. The appropriate operating conditions were achieved at pH 3 with initial concentrations of 300 mg x L(-1) H2O2 and 75 mg x L(-1) FeOx at the conditions such as the initial concentration of four drugs were 20 mg x L(-1), respectively. The order of the degradation rate for the pharmaceuticals is metronidazole > ibuprofen > sulfamethoxazole > diclofenac. During the reaction, the biological toxicity increases with time and then decreases rapidly, along with appearance and disappearance of intermediates. Finally, a model on reaction mechanism was proposed, where Solar/FeOx/H2O2 system was used for the degradation of the pharmaceuticals with low concentration in aqueous solution.
- 1 January 2010
- Published by Elsevier in Acta Physico-Chimica Sinica
- Vol. 26 (11) , 2890-2898
Thermodynamics and Kinetics of Adsorption of Diclofenac on Magnetic Multiwalled Carbon Nanotubes in an Aqueous Solution
- 1 January 2010
- Published by Elsevier in Acta Physico-Chimica Sinica
- Vol. 26 (11) , 2890-2898
Thermodynamics and Kinetics of Adsorption of Diclofenac on Magnetic Multiwalled Carbon Nanotubes in an Aqueous Solution