Denise Terroso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Denise Terroso has a total of 96 co-authors. Here are the top co-authors by number of shared publications:
- Fernando Rocha
Geobiotec Research Unit, Geosciences Department, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
16 shared publications - Maria Virgínia Alves Martins
Faculdade de Geologia, Universidade Do Estado Do Rio de Janeiro, UERJ, Rio de Janeiro, Brazil
13 shared publications - Rubens Cesar Lopes Figueira
Instituto Oceanográfico, Universidade de São Paulo (IOUSP), São Paulo, Brazil
8 shared publications - Egberto Pereira
Faculdade de Geologia, Universidade Do Estado Do Rio de Janeiro, UERJ, Rio de Janeiro, Brazil
6 shared publications - Fabrizio Frontalini
Department of Pure and Applied Sciences, University of Urbino, Urbino, Italy
6 shared publications - Antonio Tadeu dos Reis
Faculdade de Oceanografia, Universidade do Estado do Rio de Janeiro, UERJ, Rio de Janeiro, Brazil
5 shared publications
Latest Publications
- Open Access
- 8 August 2026
- Published by Elsevier in Journal of South American Earth Sciences
- Vol. 183
Changes in sedimentary records induced by natural and anthropogenic influences: near the tip of Marambaia Barrier Island (Sepetiba Bay, southeastern Brazil)
- 8 August 2026
- Published by Elsevier in Journal of South American Earth Sciences
- Vol. 183
Open AccessChanges in sedimentary records induced by natural and anthropogenic influences: near the tip of Marambaia Barrier Island (Sepetiba Bay, southeastern Brazil)
- Open Access
- 25 June 2026
- Published by Elsevier in Environmental Challenges
- Vol. 24
Rock erosion and sediment transport under climate and anthropogenic influences: Records in Ilha Grande Bay (Southeast Brazil)
- 25 June 2026
- Published by Elsevier in Environmental Challenges
- Vol. 24
Open AccessRock erosion and sediment transport under climate and anthropogenic influences: Records in Ilha Grande Bay (Southeast Brazil)
- Open Access
- 5 May 2026
- Published by Elsevier in Estuarine, Coastal and Shelf Science
- Vol. 338
Disentangling natural and anthropogenic sedimentation: current and past pollution impact on Sepetiba Bay (southeastern Brazil)
- 5 May 2026
- Published by Elsevier in Estuarine, Coastal and Shelf Science
- Vol. 338
Open AccessDisentangling natural and anthropogenic sedimentation: current and past pollution impact on Sepetiba Bay (southeastern Brazil)
- Open Access
- 7 July 2025
- Published by Springer Nature in Journal of Sedimentary Environments
- Vol. 10 (3) , 451-478
Impact caused by the transportation of iron ore on the beaches of a tourist region in SE Brazil: Mangaratiba (Rio de Janeiro)
The municipality of Mangaratiba, located in the Sepetiba Bay region (Rio de Janeiro State; Southeast Brazil), has been taken over for several years by large structures, including real estate, tourism, industrial and ore export activities. Transportation and port activities, especially iron ore logistics from the Iron Quadrangle region (MG), have changed the landscape, particularly the beaches in the municipality of Mangaratiba. Thus, this study applies a multiproxy approach (textural, mineralogical, elemental and lead isotopic data) to iron ore samples and ore particles found on beaches and a waterfall from the Mangaratiba region, aiming to identify the impact caused by ore transport and dispersion in the study area. The results show that the sands of Sahy, Ribeira, Santo Antônio, Muriqui, Mangatiba’s Centro, Junqueira, Saco and Itacuruçá beaches have relatively high contents of pyrite, hematite, magnetite/maghemite and goethite, which are part of the ore composition samples. The variation in the 206Pb/204Pb and 207Pb/204Pb values show similarity in the isotopic fingerprints in the Fe ore samples and ore particles found on beaches, suggesting common sources. Iron ore has the highest sum of toxic units (ΣTUs 17.9–21.8). The highest toxicity degree ratio (TDR) based on ΣTUs values was found in the ore samples and at Junqueira Beach, Saco Beach, near the train line, and Santo Antônio Beach, close to the Guaiba Island iron ore export terminal. This work shows that ore dispersion during transportation is causing environmental degradation on most Mangaratiba beaches. There is a risk of exposure to the ore particles by the people who visit the beaches and inhabit the region and the organisms that live there. People may inhale dust (enriched in Sb, Mn, Fe, Cd, Ag, and Ge), which is dispersed during the ore transportation by strong wind and displays irritation of the skin and eyes, among other diseases. This study indicates the need to adopt mitigating measures to avoid severe environmental damage and public health problems.
- 7 July 2025
- Published by Springer Nature in Journal of Sedimentary Environments
- Vol. 10 (3) , 451-478
Open AccessImpact caused by the transportation of iron ore on the beaches of a tourist region in SE Brazil: Mangaratiba (Rio de Janeiro)
The municipality of Mangaratiba, located in the Sepetiba Bay region (Rio de Janeiro State; Southeast Brazil), has been taken over for several years by large structures, including real estate, tourism, industrial and ore export activities. Transportation and port activities, especially iron ore logistics from the Iron Quadrangle region (MG), have changed the landscape, particularly the beaches in the municipality of Mangaratiba. Thus, this study applies a multiproxy approach (textural, mineralogical, elemental and lead isotopic data) to iron ore samples and ore particles found on beaches and a waterfall from the Mangaratiba region, aiming to identify the impact caused by ore transport and dispersion in the study area. The results show that the sands of Sahy, Ribeira, Santo Antônio, Muriqui, Mangatiba’s Centro, Junqueira, Saco and Itacuruçá beaches have relatively high contents of pyrite, hematite, magnetite/maghemite and goethite, which are part of the ore composition samples. The variation in the 206Pb/204Pb and 207Pb/204Pb values show similarity in the isotopic fingerprints in the Fe ore samples and ore particles found on beaches, suggesting common sources. Iron ore has the highest sum of toxic units (ΣTUs 17.9–21.8). The highest toxicity degree ratio (TDR) based on ΣTUs values was found in the ore samples and at Junqueira Beach, Saco Beach, near the train line, and Santo Antônio Beach, close to the Guaiba Island iron ore export terminal. This work shows that ore dispersion during transportation is causing environmental degradation on most Mangaratiba beaches. There is a risk of exposure to the ore particles by the people who visit the beaches and inhabit the region and the organisms that live there. People may inhale dust (enriched in Sb, Mn, Fe, Cd, Ag, and Ge), which is dispersed during the ore transportation by strong wind and displays irritation of the skin and eyes, among other diseases. This study indicates the need to adopt mitigating measures to avoid severe environmental damage and public health problems.
- Open Access
A Starting Point on Recycling Land and Sea Snail Shell Wastes to Manufacture Quicklime, Milk of Lime, and Hydrated Lime
The valorization of gastropod shell wastes in the production of lime is the topic of this study. First, shells from land snail and sea snail were characterized for their mineralogical, chemical, and thermal properties. Then, the shells were calcined at 1000 °C, and the obtained quicklimes were characterized for their specific surface area, pore diameter, and particle morphology, followed by evaluation of their reactivity in wet slaking tests. Comparisons were made with lime from limestone. It was found that both gastropod shell wastes were composed of aragonite as the dominant crystalline phase. The quicklime from land snail belonged to the most reactive class (R5) of the wet slaking reactivity, reaching 60 °C in about 5 min, whereas the quicklime from the sea snail belonged to the R4 class, reaching 60 °C in about 14 min. However, both were much less reactive than the lime from limestone (60 °C in 25 s). The lower reactivity of quicklime from sea snail shells compared to quicklime from land snail shells could be related to its higher sulfur content (as contaminant), lower pore diameter, and the presence of particles with rounder surfaces. The reference quicklime from limestone was more reactive, mainly due to the much higher specific surface area and lower particle size. It was concluded that the gastropod shell wastes can be used in lime manufacturing.
Open AccessA Starting Point on Recycling Land and Sea Snail Shell Wastes to Manufacture Quicklime, Milk of Lime, and Hydrated Lime
The valorization of gastropod shell wastes in the production of lime is the topic of this study. First, shells from land snail and sea snail were characterized for their mineralogical, chemical, and thermal properties. Then, the shells were calcined at 1000 °C, and the obtained quicklimes were characterized for their specific surface area, pore diameter, and particle morphology, followed by evaluation of their reactivity in wet slaking tests. Comparisons were made with lime from limestone. It was found that both gastropod shell wastes were composed of aragonite as the dominant crystalline phase. The quicklime from land snail belonged to the most reactive class (R5) of the wet slaking reactivity, reaching 60 °C in about 5 min, whereas the quicklime from the sea snail belonged to the R4 class, reaching 60 °C in about 14 min. However, both were much less reactive than the lime from limestone (60 °C in 25 s). The lower reactivity of quicklime from sea snail shells compared to quicklime from land snail shells could be related to its higher sulfur content (as contaminant), lower pore diameter, and the presence of particles with rounder surfaces. The reference quicklime from limestone was more reactive, mainly due to the much higher specific surface area and lower particle size. It was concluded that the gastropod shell wastes can be used in lime manufacturing.
- Open Access
- 8 November 2023
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 82 (23) , 1-28
Transfer of industrial contaminants from the inner to the outer region of Sepetiba Bay (SE Brazil) by dredge spoil dumping activities: a temporal record
A multiproxy approach involving grain size, geophysical (resistivity, magnetic susceptibility, and P-wave velocity), mineralogical (XRD), and geochemical (elemental, stable isotopes) data has been applied to core SP9 (128 cm long) to reconstruct natural and anthropogenic changes since ≈1850 AD (anno domine) (dating by 210Pb and 127Cs methods) in a distal region of Sepetiba Bay (SB), Rio de Janeiro State (SE Brazil). The analyzed core is a fine-grained sedimentary sequence (except its upper 20 cm). It comprises detrital particles derived from felsic and intermediate source rocks, as suggested by the fields defined by the biplot Zr vs TiO2 and the Al2O3/TiO2 ratios. Despite the increase in particle size at the top of the core, there was a progressive increase in the organic matter and potentially toxic elements (PTEs) contents and nutrients such as N and P. The geophysical data allowed us to identify the presence of subsurface (biogenic) gas, which suggests the occurrence of eutrophication processes in the study area despite its location in the outer region of the bay. Core SP9 records cyclical changes over the last ≈170 years in the mineralogical and elemental composition of the sediments and type of organic matter supplied to the bottom. These changes are associated with phases of more significant oceanic influence, salinity variations in the study area, and greater or lesser oxygen depletion in the sediment. These changes may have resulted from climatic oscillations or variations in the configuration and extension of the Ponta da Pombeba spit. The extent of this structure and the anthropic activities have contributed to the contamination of this area since 1975 AD. However, statistical analyses (Pearson correlations and principal components analysis) suggest that the transport and accumulation of PTEs (mainly Cd and Zn) did not strictly follow the general pattern of sedimentary dynamics prevailing in the studied area. Results indicate that this area became strongly polluted by Cd and Zn and with high ecological risk due to dredging and spoil disposal activities at sites close to the study area. It is noted that the environmental degradation reached higher levels here than in areas close to the primary source of the metals, the disabled Ingá Mercantil Company, in Madeira Island. This work demonstrates the temporal effect of dredge disposal activities in a distal region of Sepetiba Bay for the first time. It is a strong indicator that dredged spoil areas must be selected carefully, since healthy areas can become degraded due to the dumping of polluted waste.
- 8 November 2023
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 82 (23) , 1-28
Open AccessTransfer of industrial contaminants from the inner to the outer region of Sepetiba Bay (SE Brazil) by dredge spoil dumping activities: a temporal record
A multiproxy approach involving grain size, geophysical (resistivity, magnetic susceptibility, and P-wave velocity), mineralogical (XRD), and geochemical (elemental, stable isotopes) data has been applied to core SP9 (128 cm long) to reconstruct natural and anthropogenic changes since ≈1850 AD (anno domine) (dating by 210Pb and 127Cs methods) in a distal region of Sepetiba Bay (SB), Rio de Janeiro State (SE Brazil). The analyzed core is a fine-grained sedimentary sequence (except its upper 20 cm). It comprises detrital particles derived from felsic and intermediate source rocks, as suggested by the fields defined by the biplot Zr vs TiO2 and the Al2O3/TiO2 ratios. Despite the increase in particle size at the top of the core, there was a progressive increase in the organic matter and potentially toxic elements (PTEs) contents and nutrients such as N and P. The geophysical data allowed us to identify the presence of subsurface (biogenic) gas, which suggests the occurrence of eutrophication processes in the study area despite its location in the outer region of the bay. Core SP9 records cyclical changes over the last ≈170 years in the mineralogical and elemental composition of the sediments and type of organic matter supplied to the bottom. These changes are associated with phases of more significant oceanic influence, salinity variations in the study area, and greater or lesser oxygen depletion in the sediment. These changes may have resulted from climatic oscillations or variations in the configuration and extension of the Ponta da Pombeba spit. The extent of this structure and the anthropic activities have contributed to the contamination of this area since 1975 AD. However, statistical analyses (Pearson correlations and principal components analysis) suggest that the transport and accumulation of PTEs (mainly Cd and Zn) did not strictly follow the general pattern of sedimentary dynamics prevailing in the studied area. Results indicate that this area became strongly polluted by Cd and Zn and with high ecological risk due to dredging and spoil disposal activities at sites close to the study area. It is noted that the environmental degradation reached higher levels here than in areas close to the primary source of the metals, the disabled Ingá Mercantil Company, in Madeira Island. This work demonstrates the temporal effect of dredge disposal activities in a distal region of Sepetiba Bay for the first time. It is a strong indicator that dredged spoil areas must be selected carefully, since healthy areas can become degraded due to the dumping of polluted waste.
- 29 January 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (2) , 1-27
Long-term eutrophication and contamination of the central area of Sepetiba Bay (SW Brazil)
This work sheds light on the recent evolution (≈1915–2015 AD) of Sepetiba Bay (SB; SE Brazil), a subtropical coastal lagoon on the southwestern Brazilian coast, based on a multiproxy approach. Variations in geochemical proxies as well as textural, mineralogical and geochronological data allow us to reconstruct temporally constrained changes in the depositional environments along the SP3 sediment core collected from the central area of SB. At the beginning of the twentieth century, the substrate of the study site was composed of coarse-grained sediments, largely sourced from felsic rocks of proximal areas and deposited under moderate to strong shallow marine hydrodynamics. Since the 1930s, the study area has undergone silting and received high contributions of materials from mafic rocks sourced by river basins. The SP3 core reveals a shallowing-upward sequence due to human-induced silting with significant eutrophication since the middle of 1970, which was caused by significant enrichment of organic matter that was provided by not only marine productivity but also continental and human waste. In addition, the sediments deposited after 1980 exhibit significant enrichment and are moderately to strongly polluted by Cd and Zn. Metals were dispersed by hydrodynamics from the source areas, but diagenetic processes promoted their retention in the sediments. The potential ecological risk index (PERI) indicates that the level of high (considerable) ecological risk is in sediments deposited in ≈1995 (30–32 cm; subsurface). The applied methodology allowed us to understand the thickness of the bottom sediment affected by eutrophication processes and contaminants. Identical methodologies can be applied in other coastal zones, and can provide useful information to decision makers and stakeholders that manage those areas.
- 29 January 2021
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 193 (2) , 1-27
Long-term eutrophication and contamination of the central area of Sepetiba Bay (SW Brazil)
This work sheds light on the recent evolution (≈1915–2015 AD) of Sepetiba Bay (SB; SE Brazil), a subtropical coastal lagoon on the southwestern Brazilian coast, based on a multiproxy approach. Variations in geochemical proxies as well as textural, mineralogical and geochronological data allow us to reconstruct temporally constrained changes in the depositional environments along the SP3 sediment core collected from the central area of SB. At the beginning of the twentieth century, the substrate of the study site was composed of coarse-grained sediments, largely sourced from felsic rocks of proximal areas and deposited under moderate to strong shallow marine hydrodynamics. Since the 1930s, the study area has undergone silting and received high contributions of materials from mafic rocks sourced by river basins. The SP3 core reveals a shallowing-upward sequence due to human-induced silting with significant eutrophication since the middle of 1970, which was caused by significant enrichment of organic matter that was provided by not only marine productivity but also continental and human waste. In addition, the sediments deposited after 1980 exhibit significant enrichment and are moderately to strongly polluted by Cd and Zn. Metals were dispersed by hydrodynamics from the source areas, but diagenetic processes promoted their retention in the sediments. The potential ecological risk index (PERI) indicates that the level of high (considerable) ecological risk is in sediments deposited in ≈1995 (30–32 cm; subsurface). The applied methodology allowed us to understand the thickness of the bottom sediment affected by eutrophication processes and contaminants. Identical methodologies can be applied in other coastal zones, and can provide useful information to decision makers and stakeholders that manage those areas.
- 9 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (18) , 22612-22640
Disentangling natural vs. anthropogenic induced environmental variability during the Holocene: Marambaia Cove, SW sector of the Sepetiba Bay (SE Brazil)
Multiproxy approach based on textural, mineralogical, geochemical, and microfaunal analyses on a 176-cm-long core (SP8) has been applied to reconstruct the Holocene paleoenvironmental changes and disentangling natural vs. anthropogenic variability in Marambaia Cove of the Sepetiba Bay (SE Brazil). Sepetiba Bay became a lagoonal system due to the evolution and development of the Marambaia barrier island during the Holocene and the presence of an extensive river basin. Elemental concentrations from pre-anthropogenic layers from the nearby SP7 core have been used to estimate the baseline elemental concentrations for this region and to determine metals enrichment factors (EF), pollution load index (PLI), and sediment pollution index (SPI). Record of the core SP8 provides compelling evidence of the lagoon evolution differentiating the effects of potentially toxic elements (PTEs) under natural vs. anthropic forcing in the last ~ 9.5 ka BP. The study area was probably part of coastal sand ridges between ≈ 9.5 and 7.8 ka BP (radiocarbon date). Events of wash over deposited allochthonous material and organic matter between ≈ 8.6 and 7.8 ka. Climatic event 8.2 ka BP, in which the South American Summer Monsoon was intensified in Brazil causing higher rainfall and moisture was scored by an anoxic event. Accumulation of organic matter resulted in oxygen depletion and even anoxia in the sediment activating biogeochemical processes that resulted in the retention of potentially toxic elements (PTEs). After ≈ 7.8 ka BP at the onset of the Holocene sea-level rise, a marine incursion flooded the Marambaia Cove area (previously exposed to subaerial conditions). Environmental conditions became favorable for the colonization of benthic foraminifera. The Foram Stress Index (FSI) and Exp(H’bc) indicate that the environmental conditions turned from bad to more favorable since ≈ 7.8 ka BP, with maximum health reached at ≈ 5 ka BP, during the mid-Holocene relative sea-level highstand. Since then, the sedimentological and ecological proxies suggest that the system evolved to an increasing degree of confinement. Since ≈ 1975 AD, a sharp increase of silting, Cd, Zn, and organic matter also induced by anthropic activities caused major changes in foraminiferal assemblages with a significant increase of Ammonia/Elphidium Index (AEI), EF, and SPI values and decreasing of FSI and Exp(H’bc) (ecological indicators) demonstrating an evolution from “moderately polluted” to “heavily polluted” environment (bad ecological conditions), under variable suboxic conditions. Thus, core SP8 illustrates the most remarkable event of anthropogenic forcing on the geochemistry of the sediments and associated pollution loads and its negative effect on benthic organisms.
- 9 January 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (18) , 22612-22640
Disentangling natural vs. anthropogenic induced environmental variability during the Holocene: Marambaia Cove, SW sector of the Sepetiba Bay (SE Brazil)
Multiproxy approach based on textural, mineralogical, geochemical, and microfaunal analyses on a 176-cm-long core (SP8) has been applied to reconstruct the Holocene paleoenvironmental changes and disentangling natural vs. anthropogenic variability in Marambaia Cove of the Sepetiba Bay (SE Brazil). Sepetiba Bay became a lagoonal system due to the evolution and development of the Marambaia barrier island during the Holocene and the presence of an extensive river basin. Elemental concentrations from pre-anthropogenic layers from the nearby SP7 core have been used to estimate the baseline elemental concentrations for this region and to determine metals enrichment factors (EF), pollution load index (PLI), and sediment pollution index (SPI). Record of the core SP8 provides compelling evidence of the lagoon evolution differentiating the effects of potentially toxic elements (PTEs) under natural vs. anthropic forcing in the last ~ 9.5 ka BP. The study area was probably part of coastal sand ridges between ≈ 9.5 and 7.8 ka BP (radiocarbon date). Events of wash over deposited allochthonous material and organic matter between ≈ 8.6 and 7.8 ka. Climatic event 8.2 ka BP, in which the South American Summer Monsoon was intensified in Brazil causing higher rainfall and moisture was scored by an anoxic event. Accumulation of organic matter resulted in oxygen depletion and even anoxia in the sediment activating biogeochemical processes that resulted in the retention of potentially toxic elements (PTEs). After ≈ 7.8 ka BP at the onset of the Holocene sea-level rise, a marine incursion flooded the Marambaia Cove area (previously exposed to subaerial conditions). Environmental conditions became favorable for the colonization of benthic foraminifera. The Foram Stress Index (FSI) and Exp(H’bc) indicate that the environmental conditions turned from bad to more favorable since ≈ 7.8 ka BP, with maximum health reached at ≈ 5 ka BP, during the mid-Holocene relative sea-level highstand. Since then, the sedimentological and ecological proxies suggest that the system evolved to an increasing degree of confinement. Since ≈ 1975 AD, a sharp increase of silting, Cd, Zn, and organic matter also induced by anthropic activities caused major changes in foraminiferal assemblages with a significant increase of Ammonia/Elphidium Index (AEI), EF, and SPI values and decreasing of FSI and Exp(H’bc) (ecological indicators) demonstrating an evolution from “moderately polluted” to “heavily polluted” environment (bad ecological conditions), under variable suboxic conditions. Thus, core SP8 illustrates the most remarkable event of anthropogenic forcing on the geochemistry of the sediments and associated pollution loads and its negative effect on benthic organisms.
- 1 September 2020
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 158, 111449
Ecological quality status of the NE sector of the Guanabara Bay (Brazil): A case of living benthic foraminiferal resilience
- 1 September 2020
- Published by Elsevier in Marine Pollution Bulletin
- Vol. 158, 111449
Ecological quality status of the NE sector of the Guanabara Bay (Brazil): A case of living benthic foraminiferal resilience
- Open Access
- 12 May 2020
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 17 (10) , 3365
Assessment of Clayey Peloid Formulations Prior to Clinical Use in Equine Rehabilitation
Clays are natural ingredients used to prepare therapeutic cataplasms suitable for topical application. The knowledge about these formulations and their preparations to be applied on humans and animals has been orally transmitted since ancient times. Several empirical methods using clays have demonstrated fast and effective results in the reduction of the inflammatory response and the formation of edemas in horse limbs. The use of traditional and alternative medicine, such as pelotherapy, is now becoming more popular in veterinarian medical practice, alone or combined with other therapies in horse muscle and tendon rehabilitation. This study characterizes the use of commercial equine clays and an old therapeutic clay cataplasm formulation, using acetic acid, to treat tendon injuries in horses. This work might contribute to a major database characterization of clays used empirically on equine health, the potential of dermal absorption, the risks of exposure to some toxic elements, and safety assessment for these formulations. The present study was carried out to characterize the suitability of four commercial equine clays (Group II) and a protocoled healing mixture: “clay acetic acid cataplasm”, (Group III), to treat tendon injuries in horses. In this mixture, three conventional “green” clays (Group I) without any mineralogical specificity were used and blended with acetic acid. The mineralogical composition was determined through X-ray powder diffraction and X-ray fluorescence data. To determine the performance of the samples, cooling kinetics, oil absorption, expandability, and specific surface area were measured. According to the mineralogical composition, Group I was mainly composed of carbonates and silicates, while Group II was much richer in silicates with the main clay minerals kaolinite and illite. Group II exhibited the highest values for As, Pb, Cr, Ni, and Zn, considered potentially toxic. Both groups showed low cation exchange capacities and exchanged mainly Ca2+, with the exception of VET.1 and VET.7, which also highlight Na+, and VET.5 and VET.6, which have K+ as an exchangeable main cation. The addition of acetic acid (Group III) does not reveal any significant chemical changes. The results confirm that both clay groups are adequate for the therapeutic propose. They have good plastic properties (skin adherence), good oil absorptive capabilities (cleaning), and exchange an essential physiological element, calcium. Group II has prior industrial preparation, which is probably why it showed better results. Group I presented lower heat retention capacity and higher abrasiveness, which could be improved using cosmetic additives. The clinical benefit of the “clay acetic acid cataplasm” (Group III) could be the systemic anti-inflammatory effect established by the acetic acid.
- 12 May 2020
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 17 (10) , 3365
Open AccessAssessment of Clayey Peloid Formulations Prior to Clinical Use in Equine Rehabilitation
Clays are natural ingredients used to prepare therapeutic cataplasms suitable for topical application. The knowledge about these formulations and their preparations to be applied on humans and animals has been orally transmitted since ancient times. Several empirical methods using clays have demonstrated fast and effective results in the reduction of the inflammatory response and the formation of edemas in horse limbs. The use of traditional and alternative medicine, such as pelotherapy, is now becoming more popular in veterinarian medical practice, alone or combined with other therapies in horse muscle and tendon rehabilitation. This study characterizes the use of commercial equine clays and an old therapeutic clay cataplasm formulation, using acetic acid, to treat tendon injuries in horses. This work might contribute to a major database characterization of clays used empirically on equine health, the potential of dermal absorption, the risks of exposure to some toxic elements, and safety assessment for these formulations. The present study was carried out to characterize the suitability of four commercial equine clays (Group II) and a protocoled healing mixture: “clay acetic acid cataplasm”, (Group III), to treat tendon injuries in horses. In this mixture, three conventional “green” clays (Group I) without any mineralogical specificity were used and blended with acetic acid. The mineralogical composition was determined through X-ray powder diffraction and X-ray fluorescence data. To determine the performance of the samples, cooling kinetics, oil absorption, expandability, and specific surface area were measured. According to the mineralogical composition, Group I was mainly composed of carbonates and silicates, while Group II was much richer in silicates with the main clay minerals kaolinite and illite. Group II exhibited the highest values for As, Pb, Cr, Ni, and Zn, considered potentially toxic. Both groups showed low cation exchange capacities and exchanged mainly Ca2+, with the exception of VET.1 and VET.7, which also highlight Na+, and VET.5 and VET.6, which have K+ as an exchangeable main cation. The addition of acetic acid (Group III) does not reveal any significant chemical changes. The results confirm that both clay groups are adequate for the therapeutic propose. They have good plastic properties (skin adherence), good oil absorptive capabilities (cleaning), and exchange an essential physiological element, calcium. Group II has prior industrial preparation, which is probably why it showed better results. Group I presented lower heat retention capacity and higher abrasiveness, which could be improved using cosmetic additives. The clinical benefit of the “clay acetic acid cataplasm” (Group III) could be the systemic anti-inflammatory effect established by the acetic acid.