Jaeweon Cho
Jaeweon Cho has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Kangmin Chon
Department of Environmental Engineering, College of Engineering, Kangwon National University, Kangwondaehak-gil, 1, Chuncheon-si, Gangwon-do 24341, Republic of Korea
3 shared publications - Deg-Hyo Bae
Department of Civil & Environmental Engineering, Sejong University, Seoul, South Korea
2 shared publications - Hojung Rho
Department of Environment Research, Korea Institute of Civil Engineering and Building Technology, 283 Goyang-Daero, Ilsanseo-Gu, Goyang-Si, Gyeonggi-Do, 10223, Republic of Korea; School of Civil and Environmental Engineering, Hankyong National University, 327 Jungang-ro, Anseong, 17579, Republic of Korea; Environmental Research Institute, Hankyong National University, 327 Jungang-ro, Anseong, 17579, Republic of Korea
2 shared publications - Jongkwan Park
Department of Environment & Energy Engineering School of Smart & Green Engineering Changwon National University Republic of Korea
2 shared publications K. Chon
Department of Civil and Environmental Engineering, Yonsei University, Yonsei-ro 50, Seoul 120-749, Korea
2 shared publicationsY. Kim
School of Environmental Science and Engineering, Gwangju Institute of Science and Technology (GIST), 123 Cheomdangwagi-ro, Buk-gu, Gwangju 500-712, Korea
2 shared publications
Latest Publications
- Open Access
- 1 October 2021
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 47
Social acceptance and willingness to pay for a smart Eco-toilet system producing a Community-based bioenergy in Korea
- 1 October 2021
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 47
Open AccessSocial acceptance and willingness to pay for a smart Eco-toilet system producing a Community-based bioenergy in Korea
- Open Access
Urine Treatment on the International Space Station: Current Practice and Novel Approaches
A reliable, robust, and resilient water recovery system is of paramount importance on board the International Space Station (ISS). Such a system must be able to treat all sources of water, thereby reducing resupply costs and allowing for longer-term space missions. As such, technologies able to dewater urine in microgravity have been investigated by different space agencies. However, despite over 50 years of research and advancements on water extraction from human urine, the Urine Processing Assembly (UPA) and the Water Processor Assembly (WPA) now operating on the ISS still achieve suboptimal water recovery rates and require periodic consumables resupply. Additionally, urine brine from the treatment is collected for disposal and not yet reused. These factors, combined with the need for a life support system capable of tolerating even dormant periods of up to one year, make the research in this field ever more critical. As such, in the last decade, extensive research was conducted on the adaptation of existing or emerging technologies for the ISS context. In virtue of having a strong chemical resistance, small footprint, tuneable selectivity and versatility, novel membrane-based processes have been in focus for treating human urine. Their hybridisation with thermal and biological processes as well as the combination with new nanomaterials have been particularly investigated. This article critically reviews the UPA and WPA processes currently in operation on the ISS, summarising the research directions and needs, highlighted by major space agencies, necessary for allowing life support for missions outside the Low Earth Orbit (LEO). Additionally, it reviews the technologies recently proposed to improve the performance of the system as well as new concepts to allow for the valorisation of the nutrients in urine or the brine after urine dewatering.
Open AccessUrine Treatment on the International Space Station: Current Practice and Novel Approaches
A reliable, robust, and resilient water recovery system is of paramount importance on board the International Space Station (ISS). Such a system must be able to treat all sources of water, thereby reducing resupply costs and allowing for longer-term space missions. As such, technologies able to dewater urine in microgravity have been investigated by different space agencies. However, despite over 50 years of research and advancements on water extraction from human urine, the Urine Processing Assembly (UPA) and the Water Processor Assembly (WPA) now operating on the ISS still achieve suboptimal water recovery rates and require periodic consumables resupply. Additionally, urine brine from the treatment is collected for disposal and not yet reused. These factors, combined with the need for a life support system capable of tolerating even dormant periods of up to one year, make the research in this field ever more critical. As such, in the last decade, extensive research was conducted on the adaptation of existing or emerging technologies for the ISS context. In virtue of having a strong chemical resistance, small footprint, tuneable selectivity and versatility, novel membrane-based processes have been in focus for treating human urine. Their hybridisation with thermal and biological processes as well as the combination with new nanomaterials have been particularly investigated. This article critically reviews the UPA and WPA processes currently in operation on the ISS, summarising the research directions and needs, highlighted by major space agencies, necessary for allowing life support for missions outside the Low Earth Orbit (LEO). Additionally, it reviews the technologies recently proposed to improve the performance of the system as well as new concepts to allow for the valorisation of the nutrients in urine or the brine after urine dewatering.
- Open Access
Anthropogenic Occurrence of Phthalate Esters in Beach Seawater in the Southeast Coast Region, South Korea
In modern times, humans have contributed to the occurrence of phthalate esters (PEs) in various environmental matrices by consuming plastics that generally contain PEs, which are essential synthetic organic chemicals for fabrication of various consumer products. Five beaches in Ulsan and Busan, South Korea, were investigated for the anthropogenic occurrence of four PEs (dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), and bis(2-ethylhexyl) phthalate (DEHP)) in beach seawater. Using stir-bar sorptive extraction-thermal desorption-gas chromatography/mass spectrometry, DnBP and DEHP were determined as generally dominant. At Ilsan Beach, both the northern and southern ends showed higher DnBP and DEHP concentrations than the middle of the beach, while DMP and DEP showed similar concentrations at all points. The differences in the DnBP and DEHP concentrations may be related to the fishery industry and domestic sewage inflow to the beach. In addition, a comparison among Ilsan, Imnang, and Songjeong beaches suggested the effects of neighboring industrial areas on the DnBP and DEHP ratio. This study provides information on the effects of seasons, weather events, the proximity of rivers, industrial behavior, and domestic sewage to PE concentrations in beach seawater.
Open AccessAnthropogenic Occurrence of Phthalate Esters in Beach Seawater in the Southeast Coast Region, South Korea
In modern times, humans have contributed to the occurrence of phthalate esters (PEs) in various environmental matrices by consuming plastics that generally contain PEs, which are essential synthetic organic chemicals for fabrication of various consumer products. Five beaches in Ulsan and Busan, South Korea, were investigated for the anthropogenic occurrence of four PEs (dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), and bis(2-ethylhexyl) phthalate (DEHP)) in beach seawater. Using stir-bar sorptive extraction-thermal desorption-gas chromatography/mass spectrometry, DnBP and DEHP were determined as generally dominant. At Ilsan Beach, both the northern and southern ends showed higher DnBP and DEHP concentrations than the middle of the beach, while DMP and DEP showed similar concentrations at all points. The differences in the DnBP and DEHP concentrations may be related to the fishery industry and domestic sewage inflow to the beach. In addition, a comparison among Ilsan, Imnang, and Songjeong beaches suggested the effects of neighboring industrial areas on the DnBP and DEHP ratio. This study provides information on the effects of seasons, weather events, the proximity of rivers, industrial behavior, and domestic sewage to PE concentrations in beach seawater.
- Open Access
An Autopsy Study of a Fouled Reverse Osmosis Membrane Used for Ultrapure Water Production
This study investigated the fouling and cleaning behaviors of reverse osmosis (RO) membranes in a lab–scale ultrapure water (UPW) production system via membrane autopsies and characterization of dissolved organic matter (DOM) and membrane foulants. Most of DOM were effectively removed by the MFC filter, with the exception of the peak at 150 Da. The RO membranes were effective in reducing conductivity, DOM, total nitrogen (TN), and ultraviolet A (UVA254nm) concentration; the polishing stage using IER filter resulted in ultra-trace levels of all these parameters required for semiconductor manufacturing (> 18.2 ΩM). The quantity of the desorbed RO membrane foulants, in terms of dissolved organic carbon (DOC), varied considerably depending on the type of desorbing agents: 0.1 N NaCl (65.12 mgC m−2) > 0.1 N NaOH (46.14 mgC m−2) > deionized water (25.39 mgC m−2) > 0.1 N HCl (15.95 mgC m−2). The high cleaning efficiency of the salt solution (0.1 N NaCl) was attributed to the efficient desorption of hydrophilic DOM foulants from the RO membrane surfaces. These results demonstrate that the salt cleaning may provide a promising option to recover the performance of the RO membranes fouled primarily by hydrophilic DOM fractions.
Open AccessAn Autopsy Study of a Fouled Reverse Osmosis Membrane Used for Ultrapure Water Production
This study investigated the fouling and cleaning behaviors of reverse osmosis (RO) membranes in a lab–scale ultrapure water (UPW) production system via membrane autopsies and characterization of dissolved organic matter (DOM) and membrane foulants. Most of DOM were effectively removed by the MFC filter, with the exception of the peak at 150 Da. The RO membranes were effective in reducing conductivity, DOM, total nitrogen (TN), and ultraviolet A (UVA254nm) concentration; the polishing stage using IER filter resulted in ultra-trace levels of all these parameters required for semiconductor manufacturing (> 18.2 ΩM). The quantity of the desorbed RO membrane foulants, in terms of dissolved organic carbon (DOC), varied considerably depending on the type of desorbing agents: 0.1 N NaCl (65.12 mgC m−2) > 0.1 N NaOH (46.14 mgC m−2) > deionized water (25.39 mgC m−2) > 0.1 N HCl (15.95 mgC m−2). The high cleaning efficiency of the salt solution (0.1 N NaCl) was attributed to the efficient desorption of hydrophilic DOM foulants from the RO membrane surfaces. These results demonstrate that the salt cleaning may provide a promising option to recover the performance of the RO membranes fouled primarily by hydrophilic DOM fractions.
- Open Access
Rapid and Effective Isolation of Dissolved Organic Matter Using Solid-Phase Extraction Cartridges Packed with Amberlite XAD 8/4 Resins
Using the conventional XAD 8/4 method with general columns to isolate dissolved organic matter (DOM) is extremely time-consuming and labor-intensive. This study presents a rapid and effective method using solid-phase extraction (SPE) cartridges packed with XAD 8/4 resins for isolating various DOMs. The relative fraction (percentage hydrophobic, transphilic, and hydrophilic) of the various DOMs processed by both methods showed similar values. Moreover, changes in the molecular weight distribution of effluent from XAD 8/4 resins processed by both methods showed the same ultraviolet (UV) and fluorescence absorbance pattern s. The biopolymer compositions of eluates from XAD 8/4 resins also showed no significant difference between the two methods. However, higher carbon recovery of the isolation method using SPE cartridges was found (with columns: 88.9%; with SPE: 95.9%). In addition, the proposed method using SPE cartridges packed with XAD 8/4 resins is much faster than that using general columns (with columns: 1468 min; with SPE: 485 min). The proposed isolation method is highly efficient and accurate; it is an excellent candidate method for isolating various DOMs.
Open AccessRapid and Effective Isolation of Dissolved Organic Matter Using Solid-Phase Extraction Cartridges Packed with Amberlite XAD 8/4 Resins
Using the conventional XAD 8/4 method with general columns to isolate dissolved organic matter (DOM) is extremely time-consuming and labor-intensive. This study presents a rapid and effective method using solid-phase extraction (SPE) cartridges packed with XAD 8/4 resins for isolating various DOMs. The relative fraction (percentage hydrophobic, transphilic, and hydrophilic) of the various DOMs processed by both methods showed similar values. Moreover, changes in the molecular weight distribution of effluent from XAD 8/4 resins processed by both methods showed the same ultraviolet (UV) and fluorescence absorbance pattern s. The biopolymer compositions of eluates from XAD 8/4 resins also showed no significant difference between the two methods. However, higher carbon recovery of the isolation method using SPE cartridges was found (with columns: 88.9%; with SPE: 95.9%). In addition, the proposed method using SPE cartridges packed with XAD 8/4 resins is much faster than that using general columns (with columns: 1468 min; with SPE: 485 min). The proposed isolation method is highly efficient and accurate; it is an excellent candidate method for isolating various DOMs.
- 1 September 2018
- Published by Elsevier in Science of The Total Environment
- Vol. 635, 1345-1350
Sorption of pharmaceuticals to soil organic matter in a constructed wetland by electrostatic interaction
- 1 September 2018
- Published by Elsevier in Science of The Total Environment
- Vol. 635, 1345-1350
Sorption of pharmaceuticals to soil organic matter in a constructed wetland by electrostatic interaction
- Open Access
- 28 December 2016
- Published by MDPI AG in Sustainability
- Vol. 9 (1) , 35
Science Walden: Exploring the Convergence of Environmental Technologies with Design and Art
Science Walden, which is inspired by two prominent literary works, namely, Walden by Henry David Thoreau (1817–1862) and Walden Two by Burrhus Frederic Skinner (1904–1990), is aimed at establishing a community that embodies humanistic values while embracing scientific advancement to produce renewable energy and water sources. This study attempts to capitalize on feces standard money (FSM) and artistic collaboration between scientists and artists as a means of achieving the forms of life depicted in Walden and Walden Two. On our campus, we designed and built a pavilion that serves as a laboratory where scientific advantages, design, and art are merged. In the pavilion, feces are processed in reactors and facilities for sustainable energy production, and rainwater is harvested and treated for use in daily life. Our application of design and art contributes to easing interaction between the general public and scientists because it visualizes an ambiguous theory and concretizes it into an understandable image.
- 28 December 2016
- Published by MDPI AG in Sustainability
- Vol. 9 (1) , 35
Open AccessScience Walden: Exploring the Convergence of Environmental Technologies with Design and Art
Science Walden, which is inspired by two prominent literary works, namely, Walden by Henry David Thoreau (1817–1862) and Walden Two by Burrhus Frederic Skinner (1904–1990), is aimed at establishing a community that embodies humanistic values while embracing scientific advancement to produce renewable energy and water sources. This study attempts to capitalize on feces standard money (FSM) and artistic collaboration between scientists and artists as a means of achieving the forms of life depicted in Walden and Walden Two. On our campus, we designed and built a pavilion that serves as a laboratory where scientific advantages, design, and art are merged. In the pavilion, feces are processed in reactors and facilities for sustainable energy production, and rainwater is harvested and treated for use in daily life. Our application of design and art contributes to easing interaction between the general public and scientists because it visualizes an ambiguous theory and concretizes it into an understandable image.
- Open Access
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (44) , 20661-20670
Application of nanofiltration pretreatment to remove divalent ions for economical seawater reverse osmosis desalination
To minimize scale formation potential in the applications of reverse osmosis (RO) membranes as a pretreatment unit, relatively loose nanofiltration (NF) membrane systems coupled with ultrafiltration (UF) were used to remove divalent ions from seawater. However, the UF did not reject any ions because of pore size. The rejection of divalent ions by NF was in order of sulfate (>95%), magnesium (>60%), and calcium (>30%) in every rejection experiment based on water recovery rate (40, 50, 60, 70, and 80%). In the UF/NF/RO hybrid pilot system, most of the divalent (>99%) and the monovalent (>97%) ions were effectively rejected with slightly increased divalent ion rejection compared to the UF/RO system. Seawater temperature influenced rejection of ions with regards to either the diffusion- or convection-dominant transport of ions through the membrane pores. Electric power consumption was also compared between the UF/NF/RO process and the UF/RO process. For different salinity conditions (28,000 and 45,000 mg/L of total dissolved solids), the lowest energy consumption by NF/RO was 3.3 and 6 kWh/m3 with recovery of 80% for NF and 40% for RO, respectively.
- 1 September 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (44) , 20661-20670
Open AccessApplication of nanofiltration pretreatment to remove divalent ions for economical seawater reverse osmosis desalination
To minimize scale formation potential in the applications of reverse osmosis (RO) membranes as a pretreatment unit, relatively loose nanofiltration (NF) membrane systems coupled with ultrafiltration (UF) were used to remove divalent ions from seawater. However, the UF did not reject any ions because of pore size. The rejection of divalent ions by NF was in order of sulfate (>95%), magnesium (>60%), and calcium (>30%) in every rejection experiment based on water recovery rate (40, 50, 60, 70, and 80%). In the UF/NF/RO hybrid pilot system, most of the divalent (>99%) and the monovalent (>97%) ions were effectively rejected with slightly increased divalent ion rejection compared to the UF/RO system. Seawater temperature influenced rejection of ions with regards to either the diffusion- or convection-dominant transport of ions through the membrane pores. Electric power consumption was also compared between the UF/NF/RO process and the UF/RO process. For different salinity conditions (28,000 and 45,000 mg/L of total dissolved solids), the lowest energy consumption by NF/RO was 3.3 and 6 kWh/m3 with recovery of 80% for NF and 40% for RO, respectively.
- 1 July 2016
- Published by Elsevier in Desalination
- Vol. 389, 1
Editorial of the special issue for pressure retarded osmosis
- 1 July 2016
- Published by Elsevier in Desalination
- Vol. 389, 1
Editorial of the special issue for pressure retarded osmosis
- Open Access
- 3 November 2015
- Published by Copernicus GmbH in Drinking Water Engineering and Science
- Vol. 8 (2) , 35-48
Confirming anthropogenic influences on the major organic and inorganic constituents of rainwater in an urban area
Recently, rainwater composition affected by atmospheric pollutants has been the topic of intense study in East Asia because of its adverse environmental and human health effects. In the present study, the chemical composition and organic compounds of rainwater were investigated from June to December 2012 at Gwangju in Korea. The aim of this study is to determine the seasonal variation of rainwater chemical composition and to identify possible sources of inorganic and organic compounds. The volume-weighted mean of pH ranged from 3.83 to 8.90 with an average of 5.78. Of rainwater samples, 50 % had pH values below 5.6. The volume-weighted mean concentration (VWMC) of major ions followed the order Cl− > SO42− > NH4+ > Na+ > NO3− > Ca2+ > Mg2+ > K+. The VWMC of trace metals decreased in the order Zn > Al > Fe > Mn > Pb > Cu > Ni > Cd > Cr. The VWMCs of major ions and trace metals were higher in winter than in summer. The high enrichment factors indicate that Zn, Pb, Cu, and Cd originated predominantly from anthropogenic sources. Factor analysis (principal component analysis) indicates the influence of anthropogenic pollutants, sea salt, and crustal materials on the chemical compositions of rainwater. Benzoic acids, 1H-isoindole-1,3(2H)-dione, phthalic anhydride, benzene, acetic acids, 1,2-benzenedicarboxylic acids, benzonitrile, acetaldehyde, and acetamide were the most prominent pyrolysis fragments for rainwater organic compounds identified by pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). The results indicate that anthropogenic sources are the most important factors affecting the organic composition of rainwater in an urban area.
- 3 November 2015
- Published by Copernicus GmbH in Drinking Water Engineering and Science
- Vol. 8 (2) , 35-48
Open AccessConfirming anthropogenic influences on the major organic and inorganic constituents of rainwater in an urban area
Recently, rainwater composition affected by atmospheric pollutants has been the topic of intense study in East Asia because of its adverse environmental and human health effects. In the present study, the chemical composition and organic compounds of rainwater were investigated from June to December 2012 at Gwangju in Korea. The aim of this study is to determine the seasonal variation of rainwater chemical composition and to identify possible sources of inorganic and organic compounds. The volume-weighted mean of pH ranged from 3.83 to 8.90 with an average of 5.78. Of rainwater samples, 50 % had pH values below 5.6. The volume-weighted mean concentration (VWMC) of major ions followed the order Cl− > SO42− > NH4+ > Na+ > NO3− > Ca2+ > Mg2+ > K+. The VWMC of trace metals decreased in the order Zn > Al > Fe > Mn > Pb > Cu > Ni > Cd > Cr. The VWMCs of major ions and trace metals were higher in winter than in summer. The high enrichment factors indicate that Zn, Pb, Cu, and Cd originated predominantly from anthropogenic sources. Factor analysis (principal component analysis) indicates the influence of anthropogenic pollutants, sea salt, and crustal materials on the chemical compositions of rainwater. Benzoic acids, 1H-isoindole-1,3(2H)-dione, phthalic anhydride, benzene, acetic acids, 1,2-benzenedicarboxylic acids, benzonitrile, acetaldehyde, and acetamide were the most prominent pyrolysis fragments for rainwater organic compounds identified by pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). The results indicate that anthropogenic sources are the most important factors affecting the organic composition of rainwater in an urban area.