Takahiro Nakamura
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takahiro Nakamura has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Yasuhiko Arakawa
The University of Tokyo
5 shared publications - Yutaka Urino
Photonics Electronics Technology Research Association (PETRA)
5 shared publications - Nobuaki Hatori
Photonics Electronics Technology Research Association (PETRA), West 7A, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
4 shared publications - Junichi Fujikata
Photonics Electronics Technology Research Association (PETRA)
3 shared publications - Takanori Shimizu
National Institute of Advanced Industrial Science and Technology, Tsukuba, Japan
3 shared publications - Tsuyoshi Yamamoto
Photonics Electronics Technology Research Association (PETRA), West 7A, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
3 shared publications
Latest Publications
- Open Access
- 24 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (9) , 2680-2687
Polarization Diversified 16λ Demultiplexer Based on Silicon Wire Delayed Interferometers and Arrayed Waveguide Gratings
- 24 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (9) , 2680-2687
Open AccessPolarization Diversified 16λ Demultiplexer Based on Silicon Wire Delayed Interferometers and Arrayed Waveguide Gratings
- Open Access
- 1 April 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E102.C (4) , 333-339
Fingertip-Size Optical Module, “Optical I/O Core”, and Its Application in FPGA
Optical I/O core based on silicon photonics technology and optical/electrical assembly was developed as a fingertip-size optical module with high bandwidth density, low power consumption, and high temperature operation. The advantages of the optical I/O core, including hybrid integration of quantum dot laser diode and optical pin, allow us to achieve 300-m transmission at 25Gbps per channel when optical I/O core is mounted around field-programmable gate array without clock data recovery.
- 1 April 2019
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Transactions on Electronics
- Vol. E102.C (4) , 333-339
Open AccessFingertip-Size Optical Module, “Optical I/O Core”, and Its Application in FPGA
Optical I/O core based on silicon photonics technology and optical/electrical assembly was developed as a fingertip-size optical module with high bandwidth density, low power consumption, and high temperature operation. The advantages of the optical I/O core, including hybrid integration of quantum dot laser diode and optical pin, allow us to achieve 300-m transmission at 25Gbps per channel when optical I/O core is mounted around field-programmable gate array without clock data recovery.
- 9 January 2016
- Published by Springer Nature
- p. 1-39
Silicon Optical Interposers for High-Density Optical Interconnects
- 9 January 2016
- Published by Springer Nature
- p. 1-39
Silicon Optical Interposers for High-Density Optical Interconnects
- Open Access
Optical Characteristics of a Multichannel Hybrid Integrated Light Source for Ultra-High-Bandwidth Optical Interconnections
The optical characteristics of a multi-channel hybrid integrated light source were described for an optical interconnection with a bandwidth of over 10 Tbit/s. The power uniformity of the relative intensity of a 1000-channel light source was shown, and the minimum standard deviation s of the optical power of the 200 output ports at each 25-channel laser diode (LD) array was estimated to be 0.49 dB. This hybrid integrated light source is expected to be easily adaptable to a photonics-electronics convergence system for ultra-high-bandwidth interchip interconnections.
Open AccessOptical Characteristics of a Multichannel Hybrid Integrated Light Source for Ultra-High-Bandwidth Optical Interconnections
The optical characteristics of a multi-channel hybrid integrated light source were described for an optical interconnection with a bandwidth of over 10 Tbit/s. The power uniformity of the relative intensity of a 1000-channel light source was shown, and the minimum standard deviation s of the optical power of the 200 output ports at each 25-channel laser diode (LD) array was estimated to be 0.49 dB. This hybrid integrated light source is expected to be easily adaptable to a photonics-electronics convergence system for ultra-high-bandwidth interchip interconnections.
- Open Access
Quantum Dot Laser for a Light Source of an Athermal Silicon Optical Interposer
This paper reports a hybrid integrated light source fabricated on a silicon platform using a 1.3 μm wavelength quantum dot array laser. Temperature insensitive characteristics up to 120 °C were achieved by the optimum quantum dot structure and laser structure. Light output power was obtained that was high enough to achieve an optical error-free link of a silicon optical interposer. Furthermore, we investigated a novel spot size convertor in a silicon waveguide suitable for a quantum dot laser for lower energy cost operation of the optical interposer.
Open AccessQuantum Dot Laser for a Light Source of an Athermal Silicon Optical Interposer
This paper reports a hybrid integrated light source fabricated on a silicon platform using a 1.3 μm wavelength quantum dot array laser. Temperature insensitive characteristics up to 120 °C were achieved by the optimum quantum dot structure and laser structure. Light output power was obtained that was high enough to achieve an optical error-free link of a silicon optical interposer. Furthermore, we investigated a novel spot size convertor in a silicon waveguide suitable for a quantum dot laser for lower energy cost operation of the optical interposer.
- 22 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (6) , 1223-1229
First Demonstration of Athermal Silicon Optical Interposers With Quantum Dot Lasers Operating up to 125 °C
We previously proposed a photonics-electronics convergence system to solve bandwidth bottleneck problems among large-scale integrations (LSIs) and demonstrated a high bandwidth density with silicon optical interposers at room temperature. For practical applications, the interposers should be usable under high-temperature conditions or rapid temperature changes so that they can cope with the heat generated by the mounted LSIs. We designed and fabricated athermal silicon optical interposers integrated with temperature-insensitive components on a silicon substrate. An arrayed laser diode (LD) chip was a flip-chip bonded to the substrate. Each LD had multiple quantum dot layers with a 1.3-μm lasing wavelength. The output power was higher than 10 mW per channel up to 100 °C. Silicon optical modulator and germanium photodetector (PD) arrays were monolithically integrated on the substrate. The modulators were structured as symmetric Mach-Zehnder interferometers, which were inherently insensitive to temperature and wavelength. The phase shifters composed of p-i-n diodes were stable against temperature change under a constant bias-current condition. The PD photocurrent was also temperature insensitive, and the photo-to-dark current ratio was higher than 30 dB up to 100 °C. We achieved error-free data links at 20 Gbps and a high bandwidth density of 19 Tbps/cm 2 operating up to 125 °C without adjusting the LDs, modulators, or PDs. The interposers are tolerant of the heat generated by the mounted LSIs and usable over the extended industrial temperature range without complex monitoring or feedback controls. The bandwidth density is sufficient for the needs of the late 2010s.
- 22 December 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 33 (6) , 1223-1229
First Demonstration of Athermal Silicon Optical Interposers With Quantum Dot Lasers Operating up to 125 °C
We previously proposed a photonics-electronics convergence system to solve bandwidth bottleneck problems among large-scale integrations (LSIs) and demonstrated a high bandwidth density with silicon optical interposers at room temperature. For practical applications, the interposers should be usable under high-temperature conditions or rapid temperature changes so that they can cope with the heat generated by the mounted LSIs. We designed and fabricated athermal silicon optical interposers integrated with temperature-insensitive components on a silicon substrate. An arrayed laser diode (LD) chip was a flip-chip bonded to the substrate. Each LD had multiple quantum dot layers with a 1.3-μm lasing wavelength. The output power was higher than 10 mW per channel up to 100 °C. Silicon optical modulator and germanium photodetector (PD) arrays were monolithically integrated on the substrate. The modulators were structured as symmetric Mach-Zehnder interferometers, which were inherently insensitive to temperature and wavelength. The phase shifters composed of p-i-n diodes were stable against temperature change under a constant bias-current condition. The PD photocurrent was also temperature insensitive, and the photo-to-dark current ratio was higher than 30 dB up to 100 °C. We achieved error-free data links at 20 Gbps and a high bandwidth density of 19 Tbps/cm 2 operating up to 125 °C without adjusting the LDs, modulators, or PDs. The interposers are tolerant of the heat generated by the mounted LSIs and usable over the extended industrial temperature range without complex monitoring or feedback controls. The bandwidth density is sufficient for the needs of the late 2010s.
- 1 January 2011
- Published by Optica Publishing Group
First Demonstration of High Density Optical Interconnects Integrated with Lasers, Optical Modulators and Photodetectors on a Single Silicon Substrate
Optical interconnects integrated with lasers, silicon optical modulators and germanium photodetectors on a single silicon substrate were demonstrated for the first time. A 5 Gbps line bit rate and 3.5 Tbps/cm2 transmission density were achieved.
- 1 January 2011
- Published by Optica Publishing Group
First Demonstration of High Density Optical Interconnects Integrated with Lasers, Optical Modulators and Photodetectors on a Single Silicon Substrate
Optical interconnects integrated with lasers, silicon optical modulators and germanium photodetectors on a single silicon substrate were demonstrated for the first time. A 5 Gbps line bit rate and 3.5 Tbps/cm2 transmission density were achieved.