Lesa Brown
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lesa Brown has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Florence Sanchez
Civil and Environmental Engineering Department, Vanderbilt University, Nashville, USA
3 shared publications - Anna B. Bull
Department of Mechanical, Aerospace, and Biomedical Engineering, University of Tennessee Space Institute, Tullahoma, TN 37388, USA
1 shared publication - Catherine S. Stephens
International Research Office, U.S. Army Engineer Research and Development Center, Ruislip HA4 7HB, UK
1 shared publication - Charles William Bond
Department of Mechanical, Aerospace, and Biomedical Engineering, University of Tennessee Space Institute, Tullahoma, TN 37388, USA
1 shared publication - Christopher P. Haycook
Department of Biomedical Engineering, Vanderbilt University, Nashville, TN 37235, USA
1 shared publication - Fan Xue
Department of Biomedical Engineering, Vanderbilt University, Nashville, TN 37235, USA
1 shared publication
Latest Publications
- Open Access
Biocompatibility of Al2O3-Doped Diamond-like Carbon Laparoscope Coatings
Laparoscopic lens fogging and contamination pose significant challenges, leading to a reduced surgical field of view. Intraoperative cleaning to address these issues extends the surgical duration and elevates the risk of surgical site infections. The authors propose that a hydrophilic diamond-like carbon (DLC) coating would effectively mitigate fogging and fouling, thereby eliminating the requirement for intraoperative cleaning, while the scratch-resistant nature of DLC would provide additional benefits. The present study investigates the efficacy of aluminum oxide (Al2O3) as a dopant in diamond-like carbon (DLC) films for antifogging applications. The authors hypothesized that adding oxygen to the DLC matrix would increase surface energy by increased hydrogen bonding, resulting in a highly hydrophilic coating. Varying dopant concentrations were tested to observe their effects on hydrophilicity, transparency, biocompatibility, and wear properties. The doped films displayed a notable improvement in transparency throughout the visible spectrum. Plasma-cleaned samples demonstrated a substantial reduction in contact angles, achieving values less than 8°. The biocompatibility of these films was analyzed with CellTiter-Glo assays; the films demonstrated statistically similar levels of cell viability when compared to the control media. The absence of adenosine triphosphate released by blood platelets in contact with the DLC coatings suggests in vivo hemocompatibility. These films, characterized by high transparency, biocompatibility, and biostability, could be valuable for biomedical applications necessitating transparent coatings.
Open AccessBiocompatibility of Al2O3-Doped Diamond-like Carbon Laparoscope Coatings
Laparoscopic lens fogging and contamination pose significant challenges, leading to a reduced surgical field of view. Intraoperative cleaning to address these issues extends the surgical duration and elevates the risk of surgical site infections. The authors propose that a hydrophilic diamond-like carbon (DLC) coating would effectively mitigate fogging and fouling, thereby eliminating the requirement for intraoperative cleaning, while the scratch-resistant nature of DLC would provide additional benefits. The present study investigates the efficacy of aluminum oxide (Al2O3) as a dopant in diamond-like carbon (DLC) films for antifogging applications. The authors hypothesized that adding oxygen to the DLC matrix would increase surface energy by increased hydrogen bonding, resulting in a highly hydrophilic coating. Varying dopant concentrations were tested to observe their effects on hydrophilicity, transparency, biocompatibility, and wear properties. The doped films displayed a notable improvement in transparency throughout the visible spectrum. Plasma-cleaned samples demonstrated a substantial reduction in contact angles, achieving values less than 8°. The biocompatibility of these films was analyzed with CellTiter-Glo assays; the films demonstrated statistically similar levels of cell viability when compared to the control media. The absence of adenosine triphosphate released by blood platelets in contact with the DLC coatings suggests in vivo hemocompatibility. These films, characterized by high transparency, biocompatibility, and biostability, could be valuable for biomedical applications necessitating transparent coatings.
- Open Access
Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D-Printed Cementitious Materials
Cement-based 3D printing provides an opportunity to create cement-based elements with a hierarchy of structures and patterns that are not easily achievable using traditional casting techniques, thereby providing new possibilities for improving thermal control and energy storage in cement-based materials. In this study, the influence of internal architecture and ink formulation on the thermal behavior of 3D-printed cement composite beams was investigated using infrared thermal imaging and a conceptual one-dimensional heat transfer model based on cooling fins in convective media. Three-dimensional printed beams with rectilinear, three-dimensional honeycomb, and Archimedean chord infill patterns and cement ink formulations with and without 5% halloysite nanoclay were exposed to a heating source at one end. The thermal behavior of the beams was found to be predominantly influenced by their internal architecture rather than the cement ink formulation, with differences in void structures and heat transfer pathways among the different architectures resulting in a hierarchy of apparent thermal conductivity. The internal architecture resulted in a reduction in apparent thermal conductivity by up to 75%, while the incorporation of halloysite nanoclay in the cement ink led to a reduction of up to 14%. Among the tested internal architecture, the rectilinear architecture showed a 10–15% higher apparent thermal conductivity compared to the three-dimensional honeycomb architecture and a 35–40% higher apparent thermal conductivity than the Archimedean architecture. The research demonstrates a promising strategy for fabricating and evaluating cement-based materials with thermal management capabilities using 3D printing methods.
Open AccessInfluence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D-Printed Cementitious Materials
Cement-based 3D printing provides an opportunity to create cement-based elements with a hierarchy of structures and patterns that are not easily achievable using traditional casting techniques, thereby providing new possibilities for improving thermal control and energy storage in cement-based materials. In this study, the influence of internal architecture and ink formulation on the thermal behavior of 3D-printed cement composite beams was investigated using infrared thermal imaging and a conceptual one-dimensional heat transfer model based on cooling fins in convective media. Three-dimensional printed beams with rectilinear, three-dimensional honeycomb, and Archimedean chord infill patterns and cement ink formulations with and without 5% halloysite nanoclay were exposed to a heating source at one end. The thermal behavior of the beams was found to be predominantly influenced by their internal architecture rather than the cement ink formulation, with differences in void structures and heat transfer pathways among the different architectures resulting in a hierarchy of apparent thermal conductivity. The internal architecture resulted in a reduction in apparent thermal conductivity by up to 75%, while the incorporation of halloysite nanoclay in the cement ink led to a reduction of up to 14%. Among the tested internal architecture, the rectilinear architecture showed a 10–15% higher apparent thermal conductivity compared to the three-dimensional honeycomb architecture and a 35–40% higher apparent thermal conductivity than the Archimedean architecture. The research demonstrates a promising strategy for fabricating and evaluating cement-based materials with thermal management capabilities using 3D printing methods.
- Open Access
- 10 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (2) , 223
Effect of Carbon Nanofiber Clustering on the Micromechanical Properties of a Cement Paste
The use of carbon nanofibers (CNFs) in cement systems has received significant interest over the last decade due to their nanoscale reinforcing potential. However, despite many reports on the formation of localized CNF clusters, their effect on the cement paste micromechanical properties and relation to the mechanical response at the macroscopic scale are still not fully understood. In this study, grid nanoindentation coupled with scanning electron microscopy and energy dispersive spectroscopy was used to determine the local elastic indentation modulus and hardness of a portland cement paste containing 0.2% CNFs with sub-micro and microscale CNF clusters. The presence of low stiffness and porous assemblage of phases (modulus of 15–25 GPa) was identified in the cement paste with CNFs and was attributed primarily to the interfacial zone surrounding the CNF clusters. The CNFs favored the formation of higher modulus C–S–H phases (>30 GPa) in the bulk paste at the expense of the lower stiffness C–S–H. Nanoindentation results combined with a microscale–macroscale upscaling homogenization method further revealed an elastic modulus of the CNF clusters in the range from 18 to 21 GPa, indicating that the CNF clusters acted as compliant inclusions relative to the cement paste.
- 10 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (2) , 223
Open AccessEffect of Carbon Nanofiber Clustering on the Micromechanical Properties of a Cement Paste
The use of carbon nanofibers (CNFs) in cement systems has received significant interest over the last decade due to their nanoscale reinforcing potential. However, despite many reports on the formation of localized CNF clusters, their effect on the cement paste micromechanical properties and relation to the mechanical response at the macroscopic scale are still not fully understood. In this study, grid nanoindentation coupled with scanning electron microscopy and energy dispersive spectroscopy was used to determine the local elastic indentation modulus and hardness of a portland cement paste containing 0.2% CNFs with sub-micro and microscale CNF clusters. The presence of low stiffness and porous assemblage of phases (modulus of 15–25 GPa) was identified in the cement paste with CNFs and was attributed primarily to the interfacial zone surrounding the CNF clusters. The CNFs favored the formation of higher modulus C–S–H phases (>30 GPa) in the bulk paste at the expense of the lower stiffness C–S–H. Nanoindentation results combined with a microscale–macroscale upscaling homogenization method further revealed an elastic modulus of the CNF clusters in the range from 18 to 21 GPa, indicating that the CNF clusters acted as compliant inclusions relative to the cement paste.
- 1 January 2015
- Published by Springer Nature
- p. 65-70
A Nanoindentation Study of Portland Cement Pastes Exposed to a Decalcifying Environment
- 1 January 2015
- Published by Springer Nature
- p. 65-70
A Nanoindentation Study of Portland Cement Pastes Exposed to a Decalcifying Environment