Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Longkai Wang has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nonlinear Vibration Suppression of Rotor System Based on Oil Film Zoning Regulation

    by Yangyan Zhang, Zhe Mo, Xingyun Tan, Longkai Wang, Xinli Zhong, Runmin Li

    Squeeze-Film Dampers (SFDs), with their fixed structural parameters, can easily induce detrimental nonlinear dynamic behaviors, resulting in rotor instability and fatigue damage. This paper proposes a novel partitioned oil film control method to adjust oil film stiffness and damping, thereby reducing the nonlinear vibration level of the rotor. The SFD is designed with an outer ring comprising three independently adjustable bearing pads (referred to as SSFD). The radial position of each pad is controlled by a piezoelectric actuator (PZT), enabling localized regulation of oil film clearance in different circumferential regions. This study involved developing a dynamic model of the SSFD-rotor system, which was experimentally validated. Through analysis of oil film pressure and force, we revealed the controllable mechanical properties of the SSFD. The nonlinear dynamics were thoroughly investigated. The proposed partitioned control method proved superior to the SFD, demonstrating a significant reduction in system nonlinear vibrations.

  • Open Access

    Study on Fatigue Crack Propagation Caused by Sensor Slots in Intelligent Tapered Bearings

    by Longkai Wang, Fengyuan Liu, Yangyan Zhang, Yijun Yin

    Electric-shovel top sheave bearings with sensor-embedded slots operate under harsh service loads, making them prone to fatigue crack initiation and propagation. Accurate predictions of crack growth within the bearing body are therefore essential for intelligent bearing design and reliability assessments because the bearing integrity directly affects shovel service life and safety. This paper presents a sub-modeling-based method that embeds initial cracks while preserving actual roller-ring boundary conditions and ensuring computational efficiency via adaptive mesh refinement. A global model first identifies critical crack-prone zones, after which the sub-model systematically examines the effects of the initial crack angle and sensor-embedded slot depth on the propagation behavior. The results indicate that both factors significantly increased the stress intensity factor (SIF). Among the evaluated designs, the 15 mm -deep slot produced the highest SIFs and the shortest predicted crack-propagation life, indicating that slot depth was a key design parameter under the investigated conditions. The findings provide theoretical support for the structural design and fatigue evaluation of intelligent electric-shovel top sheave bearings.

  • Open Access

    Design Optimization of Sensor-Embedded Bearing Rings in Heavy-Duty Electric Shovel Applications via Multi-Physics Coupling Analysis and Experimental Validation

    by Longkai Wang, Fengyuan Liu, Can Hu, Hongbin Tang

    To enhance the thermo-mechanical coupling performance of heavy-duty bearings with smart sensing capability in electric shovel applications, this study proposes a multi-objective optimization methodology for sensor-embedded bearing rings incorporating smart sensor-embedded grooves. Driven by multi-physics coupling analysis and experimental validation, a coupled thermal–mechanical model integrating frictional heat generation, heat transfer, and stress response was established. Parametric finite element simulations were conducted, with varying groove depths and axial positions. A comprehensive performance index combining three metrics—maximum temperature, equivalent stress, and principal strain—was formulated to evaluate design efficacy. Experimental tests on thermal and strain responses were employed to validate the simulation model confirming its predictive ability. Among the 21 parameter combinations, the configuration featuring an 8 mm groove depth located 20 mm from the large end face exhibited relatively optimal synergy across thermal dissipation, structural strength, and strain sensitivity. The proposed framework provides a certain theoretical and practical guidance for the design and optimization of the sensor-embedded groove structure in intelligent heavy-duty bearings.


  • Open Access

    Thermo-Mechanical Coupled Characteristics for the Non-Axisymmetric Outer Ring of the High-Speed Rail Axle Box Bearing with Embedded Intelligent Sensor Slots

    by Longkai Wang, Can Hu, Fengyuan Liu, Hongbin Tang

    As high-speed railway systems continue to develop toward intelligent operation, axle box bearings integrated with sensors have become key components for real-time condition monitoring. However, introducing sensor-embedded slots disrupts the structural continuity and thermal conduction paths of traditional bearing rings. This results in localized stress concentrations and thermal distortion, which compromise the bearing’s overall performance and service life. This study focuses on a double-row tapered roller bearing used in axle boxes and develops a multi-physics finite element model incorporating the effects of sensor-embedded grooves, based on Hertzian contact theory and the Palmgren frictional heat model. Both contact load verification and thermo-mechanical coupling analysis were performed to evaluate the influence of two key design parameters—groove depth and arc length—on equivalent stress, temperature distribution, and thermo-mechanical coupling deformation. The results show that the embedded slot structure significantly alters the local thermodynamic response. Especially when the slot depth reaches a certain value, both stress and deformation due to thermo-mechanical effects exhibit obvious nonlinear escalation. During the design process, the length and depth of the arc-shaped embedded slot, among other parameters, should be strictly controlled. The study of the stress and temperature characteristics under the thermos-mechanical coupling effect of the axle box bearing is of crucial importance for the design of the intelligent bearing body structure and safety assessment.


  • Open Access

    An Investigation on the Mechanical Characteristics of Railway Locomotive Axle Box Bearings with Sensor-Embedded Slots

    by Longkai Wang, Can Hu, Lin Hu, Fengyuan Liu, Hongbin Tang

    The intelligent bearing with an embedded sensor is a key technology to realize the running state monitoring of railway locomotive axle box bearings at the source end. To investigate the mechanical properties of axle box bearings with embedded sensor slots, based on nonlinear Hertzian contact theory and the bearing fatigue life theory, a mechanical equivalent analysis model with a virtual mandrel is established for double-row tapered roller bearings used in axle boxes with sensor-embedded slots, which integrally considers the effects of external forces. After verifying the mesh independence before and after embedding the sensor slots, the contact load of tapered rollers calculated by the mechanical model is compared with the theoretical solution based on Hertz contact which verifies the validity of the model from the perspective of contact load. The results show that adjusting the grooving depth and axial position has a significant effect on the local stress peak, and an excessive grooving depth or inappropriate axial position will trigger fatigue damage. This study provides a theoretical basis for analyzing the mechanical characteristics of sensor-embedded slots used in railway locomotive axle box bearings.


  • Vibration characteristics of a high-speed turbocharger rotor with mass unbalance based on simulation and experiment

    by Longkai Wang, Lin Hu, Jie Zhang, Jiacai Liao

    Aiming at the problem of large-amplitude vibration appearing in turbochargers due to the effect of unbalance and nonlinear oil whirl/whip during operation, vibration characteristics with the variation of unbalance is studied by combining the simulation and the experimental test. Based on FE method and DOF reduction technique, a realistic turbocharging rotor is discretized into a series of master- and sub-elements by Timoshenko beam theory. The motion equations of turbocharger rotor-bearing system are derived by coupling rotor-floating ring equation and the oil-film Reynold equation. The research focuses on the unbalance effect on the sub-synchronous vibration and the total vibration level. The unbalance distribution, unbalance level, and the relative phase are the variables in the study. The result shows that 0.12× sub-synchronous from outer oil-film instability is responsible to the severe vibration at high-speed working conditions. Meaningfully, a suitable unbalance can significantly increase the onset speed for instability, and reduce overall vibration level. The mass unbalance of 1.5 g·mm on the compressor side shows good vibration characteristics, while the unbalance on the turbine side should be eliminated as much as possible. The proposed research provides a certain guidance for suppressing the total vibration level, and to control the unbalance in turbocharger rotor during operation.