Saman De Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Saman De Silva has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Sujeeva Setunge
School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
4 shared publications - Rajeev Roychand
School of Engineering
3 shared publications - Chun-Qing Li
School of Engineering, RMIT University, Melbourne 3000, Australia
2 shared publications - David William Law
RMIT University
2 shared publications - Ferid A. Yonis
School of Engineering, University of Royal Melbourne Institute Technology, Melbourne, VIC 3000, Australia
2 shared publications - Chandana Siriwardana
School of Built Environment, Massey University, Auckland 0632, New Zealand
1 shared publication
Latest Publications
- Open Access
Dam Breach Parameters in a Cascade Dam Failure Based on a Regional and Site-Specific Seismic Response Analysis Approach
Cascade dams describe an arrangement of several dam structures built along a flow path. Failure of one upstream dam in the cascade system can trigger catastrophic consequences to the downstream dams, as evidenced recently in the Edenville Dam and Sanford Dam. Previous research has mainly focused on rainfall-induced dam failures, although recent failures have demonstrated a combination of floods and earthquakes. Moreover, limited studies have analyzed the sensitivity of dam breach parameters, such as dam breach height and width in dams arranged in a cascade system for seismic events. Most hydraulic simulations that model seismic-induced dam failures assume the complete collapse of dams to analyze the downstream consequences. Hence, this study presents a novel analysis in simulating earthquake-induced failures in a cascade dam system, considering the sensitivity of dam breach parameters. In addition, dam breach parameters have been derived from the structural analysis of dams employing Finite Element Models (FEMs) to a critical Peak Ground Acceleration (PGA) of 0.3 g. Two-dimensional hydrodynamic simulations, along with the full dynamic wave equations, are undertaken in the study to model the earthquake-induced cascade dam failures. The results further elaborate on the significance of modeling cascade dam failures in terms of the consecutive arrival of floods and total flow compared to individual dam failures. Sensitivity analysis of dam breach parameters shows that the breach height is more significant than the breach width and breach slope. However, its significance decreases as the dam breach flood flow path increases in distance. The study further confirms the novel utilization of structural analysis to derive dam breach parameters for seismic-induced dam failures of concrete arch dams and rockfill dams, which will guide the optimization of disaster mitigation strategies and the operational resilience of the dams.
Open AccessDam Breach Parameters in a Cascade Dam Failure Based on a Regional and Site-Specific Seismic Response Analysis Approach
Cascade dams describe an arrangement of several dam structures built along a flow path. Failure of one upstream dam in the cascade system can trigger catastrophic consequences to the downstream dams, as evidenced recently in the Edenville Dam and Sanford Dam. Previous research has mainly focused on rainfall-induced dam failures, although recent failures have demonstrated a combination of floods and earthquakes. Moreover, limited studies have analyzed the sensitivity of dam breach parameters, such as dam breach height and width in dams arranged in a cascade system for seismic events. Most hydraulic simulations that model seismic-induced dam failures assume the complete collapse of dams to analyze the downstream consequences. Hence, this study presents a novel analysis in simulating earthquake-induced failures in a cascade dam system, considering the sensitivity of dam breach parameters. In addition, dam breach parameters have been derived from the structural analysis of dams employing Finite Element Models (FEMs) to a critical Peak Ground Acceleration (PGA) of 0.3 g. Two-dimensional hydrodynamic simulations, along with the full dynamic wave equations, are undertaken in the study to model the earthquake-induced cascade dam failures. The results further elaborate on the significance of modeling cascade dam failures in terms of the consecutive arrival of floods and total flow compared to individual dam failures. Sensitivity analysis of dam breach parameters shows that the breach height is more significant than the breach width and breach slope. However, its significance decreases as the dam breach flood flow path increases in distance. The study further confirms the novel utilization of structural analysis to derive dam breach parameters for seismic-induced dam failures of concrete arch dams and rockfill dams, which will guide the optimization of disaster mitigation strategies and the operational resilience of the dams.
- Open Access
Systematic Mapping of Global Research on Disaster Damage Estimation for Buildings: A Machine Learning-Aided Study
Research on disaster damage estimation for buildings has gained extensive attention due to the increased number of disastrous events, facilitating risk assessment, the effective integration of disaster resilience measures, and policy development. A systematic mapping study has been conducted, focusing on disaster damage estimation studies to identify trends, relationships, and gaps in this large and exponentially growing subject area. A novel approach using machine learning algorithms to screen, categorise, and map the articles was adopted to mitigate the constraints of manual handling. Out of 8608 articles from major scientific databases, the most relevant 2186 were used in the analysis. These articles were classified based on the hazard, geographical location, damage function properties, and building properties. Key observations reveal an emerging trend in publications, with most studies concentrated in developed and severely disaster-affected countries in America, Europe, and Asia. A significant portion (68%) of the relevant articles focus on earthquakes. However, as the key research opportunities, a notable research gap exists in studies focusing on the African and South American continents despite the significant damage caused by disasters there. Additionally, studies on floods, hurricanes, and tsunamis are minimal compared to those on earthquakes. Further trends and relationships in current studies were analysed to convey insights from the literature, identifying research gaps in terms of hazards, geographical locations, and other relevant parameters. These insights aim to effectively guide future research in disaster damage estimation for buildings.
Open AccessSystematic Mapping of Global Research on Disaster Damage Estimation for Buildings: A Machine Learning-Aided Study
Research on disaster damage estimation for buildings has gained extensive attention due to the increased number of disastrous events, facilitating risk assessment, the effective integration of disaster resilience measures, and policy development. A systematic mapping study has been conducted, focusing on disaster damage estimation studies to identify trends, relationships, and gaps in this large and exponentially growing subject area. A novel approach using machine learning algorithms to screen, categorise, and map the articles was adopted to mitigate the constraints of manual handling. Out of 8608 articles from major scientific databases, the most relevant 2186 were used in the analysis. These articles were classified based on the hazard, geographical location, damage function properties, and building properties. Key observations reveal an emerging trend in publications, with most studies concentrated in developed and severely disaster-affected countries in America, Europe, and Asia. A significant portion (68%) of the relevant articles focus on earthquakes. However, as the key research opportunities, a notable research gap exists in studies focusing on the African and South American continents despite the significant damage caused by disasters there. Additionally, studies on floods, hurricanes, and tsunamis are minimal compared to those on earthquakes. Further trends and relationships in current studies were analysed to convey insights from the literature, identifying research gaps in terms of hazards, geographical locations, and other relevant parameters. These insights aim to effectively guide future research in disaster damage estimation for buildings.
- Open Access
Investigating the Reliability of an Existing Top Angle and Seat Pad Semi-Rigid Connection System Using Advanced Modelling Techniques
The investigation introduces an advanced model procedure for evaluating the structural reliability of semi-rigid frame connections in existing aged buildings. Specifically, the focus is on the top angle and seat pad (TA–SP) semi-rigid connection, which was not initially considered in the current design standards. The approach employs a plastic hinge model to predict the ultimate strength of the connection and its beam-to-column behaviour. In order to increase computational efficiency, the investigation leverages the nonlinear behaviour of the finite element (FE) model to validate critical parameters. The statistical properties of the existing connection were obtained based on past experimental data, highlighting the weakest elements in the system. The first-order and second-order reliability methods and Monte Carlo simulations were employed to estimate the reliability index. Percentile errors were assessed to understand their impact on higher-order interactions. This new technique of identification quantifies the probability of the system failure interactions. Notably, a 45% lesser error aligns with the target reliability index, while a 114.5% larger error indicates a significant deviation from actual failure probability values. Each methodology introduced adheres to the current standard, and the system reliability analysis provides a vigorous conclusions scheme framework for assessing the existing TA–SP semi-rigid connection.
Open AccessInvestigating the Reliability of an Existing Top Angle and Seat Pad Semi-Rigid Connection System Using Advanced Modelling Techniques
The investigation introduces an advanced model procedure for evaluating the structural reliability of semi-rigid frame connections in existing aged buildings. Specifically, the focus is on the top angle and seat pad (TA–SP) semi-rigid connection, which was not initially considered in the current design standards. The approach employs a plastic hinge model to predict the ultimate strength of the connection and its beam-to-column behaviour. In order to increase computational efficiency, the investigation leverages the nonlinear behaviour of the finite element (FE) model to validate critical parameters. The statistical properties of the existing connection were obtained based on past experimental data, highlighting the weakest elements in the system. The first-order and second-order reliability methods and Monte Carlo simulations were employed to estimate the reliability index. Percentile errors were assessed to understand their impact on higher-order interactions. This new technique of identification quantifies the probability of the system failure interactions. Notably, a 45% lesser error aligns with the target reliability index, while a 114.5% larger error indicates a significant deviation from actual failure probability values. Each methodology introduced adheres to the current standard, and the system reliability analysis provides a vigorous conclusions scheme framework for assessing the existing TA–SP semi-rigid connection.
- Open Access
- 15 March 2024
- Published by MDPI AG in Preprints.org
Investigating the Reliability of Existing TA-SP Semi-rigid Connection System by Advanced Modeling Techniques
This investigation introduces an efficient method for assessing the reliability of semi-rigid steel frame connections in existing buildings, explicitly targeting the Top Angle and Seat Pad (TA-SP) semi-rigid connection commonly used in Australian cities' high-rise buildings. The moment capacity of these connections was examined through parameter power model testing, meticulously considering the bending, shear, and prying forces actions to determine the weakest elements in the connection system. A plastic hinge model was applied to ensure computational efficiency and accuracy in assessing the connections' ultimate strength. Comparatively, the finite element (F.E) method M−θ curves were introduced to scrutinise the nonlinear behaviour of the connection, providing validation for the predicted analytical approach. Further emphasis was placed on identifying the reliability of the weakest elements in the connection system, employing the First-Order and Second-Order Reliability Methods models to estimate their reliability index. The correlation between the model's failure probability and a percentile error was also explored, utilising Monte Carlo simulation reference for refined validation. Novel formulas and methodologies were introduced to compute the locked-chain-series system reliability, which accounts for the inherent material and geometric variability. The findings highlight the critical significance of the weakest element in determining the overall reliability of the existing TA-SP connection.
- 15 March 2024
- Published by MDPI AG in Preprints.org
Open AccessInvestigating the Reliability of Existing TA-SP Semi-rigid Connection System by Advanced Modeling Techniques
This investigation introduces an efficient method for assessing the reliability of semi-rigid steel frame connections in existing buildings, explicitly targeting the Top Angle and Seat Pad (TA-SP) semi-rigid connection commonly used in Australian cities' high-rise buildings. The moment capacity of these connections was examined through parameter power model testing, meticulously considering the bending, shear, and prying forces actions to determine the weakest elements in the connection system. A plastic hinge model was applied to ensure computational efficiency and accuracy in assessing the connections' ultimate strength. Comparatively, the finite element (F.E) method M−θ curves were introduced to scrutinise the nonlinear behaviour of the connection, providing validation for the predicted analytical approach. Further emphasis was placed on identifying the reliability of the weakest elements in the connection system, employing the First-Order and Second-Order Reliability Methods models to estimate their reliability index. The correlation between the model's failure probability and a percentile error was also explored, utilising Monte Carlo simulation reference for refined validation. Novel formulas and methodologies were introduced to compute the locked-chain-series system reliability, which accounts for the inherent material and geometric variability. The findings highlight the critical significance of the weakest element in determining the overall reliability of the existing TA-SP connection.
- 1 April 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (4)
Nanosilica Modified High-Volume Fly Ash and Slag Cement Composite: Environmentally Friendly Alternative to OPC
In the quest to develop a green cement composite with the lowest possible carbon footprint and the highest possible use of industrial by-products, an experimental investigation was undertaken, replacing 100% of ordinary portland cement. This paper presents the results of an experimental program to develop a zero-cement composite, incorporating 2.5, 5, and 7.5% nanosilica, 72.5, 70, and 67.5% fly ash, 25% ground granulated blast furnace slag (GGBFS), and hydrated lime used as a cement additive at 10 and 15% of the total supplementary cementitious material. Compressive strength tests were undertaken to study the mechanical properties of mortar samples of various mix designs. In addition, scanning electron microscopy, thermogravimetry, and X-ray diffraction were undertaken in conjunction with quantitative phase analysis to investigate the various physicochemical changes taking place within the cement matrix and to formulate strategies for its further development. The results demonstrate that the addition of nanosilica and hydrated lime to low calcium/high-volume fly ash and GGBFS blend can help in achieving an environmentally friendly zero-cement composite without the need of any heat treatment. The optimum content of nanosilica was found to be 5%. With the further increase in nanosilica content, although the pozzolanic reaction and the resulting gel formation increases, it also increases the microcracking within the cement matrix, resulting in the reduction in compressive strength at both 7 and 28 days of curing. The siliceous hydrogarnet formed as a result of the pozzolanic reaction of amorphous silica (FA, GGBFS, NS), with the calcium aluminate present in GGBFS, shows very poor crystallinity with no visible peak reflection in X-ray diffraction data. The formation of siliceous hydrogarnet increases with the increase in amorphous nanosilica, but decreases with the increase in hydrated lime content.- 1 April 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (4)
Nanosilica Modified High-Volume Fly Ash and Slag Cement Composite: Environmentally Friendly Alternative to OPC
In the quest to develop a green cement composite with the lowest possible carbon footprint and the highest possible use of industrial by-products, an experimental investigation was undertaken, replacing 100% of ordinary portland cement. This paper presents the results of an experimental program to develop a zero-cement composite, incorporating 2.5, 5, and 7.5% nanosilica, 72.5, 70, and 67.5% fly ash, 25% ground granulated blast furnace slag (GGBFS), and hydrated lime used as a cement additive at 10 and 15% of the total supplementary cementitious material. Compressive strength tests were undertaken to study the mechanical properties of mortar samples of various mix designs. In addition, scanning electron microscopy, thermogravimetry, and X-ray diffraction were undertaken in conjunction with quantitative phase analysis to investigate the various physicochemical changes taking place within the cement matrix and to formulate strategies for its further development. The results demonstrate that the addition of nanosilica and hydrated lime to low calcium/high-volume fly ash and GGBFS blend can help in achieving an environmentally friendly zero-cement composite without the need of any heat treatment. The optimum content of nanosilica was found to be 5%. With the further increase in nanosilica content, although the pozzolanic reaction and the resulting gel formation increases, it also increases the microcracking within the cement matrix, resulting in the reduction in compressive strength at both 7 and 28 days of curing. The siliceous hydrogarnet formed as a result of the pozzolanic reaction of amorphous silica (FA, GGBFS, NS), with the calcium aluminate present in GGBFS, shows very poor crystallinity with no visible peak reflection in X-ray diffraction data. The formation of siliceous hydrogarnet increases with the increase in amorphous nanosilica, but decreases with the increase in hydrated lime content.- Open Access
- 11 January 2016
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 10 (1) , 113-124
Micro and Nano Engineered High Volume Ultrafine Fly Ash Cement Composite with and without Additives
- 11 January 2016
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 10 (1) , 113-124
Open AccessMicro and Nano Engineered High Volume Ultrafine Fly Ash Cement Composite with and without Additives
- 10 May 2015
- Published by Springer Nature in Materials and Structures
- Vol. 49 (5) , 1997-2008
High volume fly ash cement composite modified with nano silica, hydrated lime and set accelerator
- 10 May 2015
- Published by Springer Nature in Materials and Structures
- Vol. 49 (5) , 1997-2008
High volume fly ash cement composite modified with nano silica, hydrated lime and set accelerator