Djahida Sidane
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Djahida Sidane has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Hafit Khireddine
Université de Bejaia, Faculté de Technologie, Laboratoire de Génie de l’Environnement (LGE), 06000 Bejaia, Algeria
9 shared publications - Sabeha Yala
Université de Bejaia
7 shared publications - Didier Chicot
Université de Lille
2 shared publications F. Bir
Laboratoire de Génie de L’Environnement, Département de Génie des Procédés, Faculté de Technologie, Université de Béjaia, Bejaïa, Algeria
2 shared publicationsFatima Bir
Université de Bejaia
2 shared publicationsA. Beljebbar
UMR CNRS 7369, Equipe MéDIAN Biophotonique et Technologies pour la Santé, UFR de Pharmacie, SFR-CAP Santé (FED 4231), Université de Reims Champagne Ardenne, 51 rue Cognacq-Jay, 51096 Reims, France
1 shared publication
Latest Publications
- 22 July 2025
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 20 (5)
Microstructural Modification of Calcium Phosphate–Based Bioceramic Materials by Adding Gelatin
Calcium phosphate (CaP) bioceramics like hydroxyapatite (HAP) are widely used for hard tissue repair due to their chemical and structural similarities to the mineral phase of bone. In order to improve their properties and expand their clinical applications, for example, to be used in the scaffold manufacturing process for bone tissue engineering, their structure was modified by introducing a biodegradable natural polymer like gelatin. This work aimed to study both the effect of adding different amounts of gelatin and calcination temperature on the microstructure of calcium phosphate–based bioceramics. Microstructural characterization indicated that the materials obtained after incorporation of different quantities of gelatin were chemically modified. They mainly contain the hydroxyapatite phase. Thermal degradation of gelatin incorporated in the bioceramic phase influenced its porosity. Indeed, the crystallinity of the gelatin‐modified calcium phosphate materials varies depending on the quantity of gelatin added and the calcination temperature. For a volume of 50% of gelatin, the bioceramic calcined at 500°C exhibited the highest porosity corresponding to that of spongy bone. The in vitro test indicated the formation of CaP‐like hydroxyapatite particles on the surface of the 50% bioceramic modified with gelatin calcined at 900°C.
- 22 July 2025
- Published by Wiley in Asia-Pacific Journal of Chemical Engineering
- Vol. 20 (5)
Microstructural Modification of Calcium Phosphate–Based Bioceramic Materials by Adding Gelatin
Calcium phosphate (CaP) bioceramics like hydroxyapatite (HAP) are widely used for hard tissue repair due to their chemical and structural similarities to the mineral phase of bone. In order to improve their properties and expand their clinical applications, for example, to be used in the scaffold manufacturing process for bone tissue engineering, their structure was modified by introducing a biodegradable natural polymer like gelatin. This work aimed to study both the effect of adding different amounts of gelatin and calcination temperature on the microstructure of calcium phosphate–based bioceramics. Microstructural characterization indicated that the materials obtained after incorporation of different quantities of gelatin were chemically modified. They mainly contain the hydroxyapatite phase. Thermal degradation of gelatin incorporated in the bioceramic phase influenced its porosity. Indeed, the crystallinity of the gelatin‐modified calcium phosphate materials varies depending on the quantity of gelatin added and the calcination temperature. For a volume of 50% of gelatin, the bioceramic calcined at 500°C exhibited the highest porosity corresponding to that of spongy bone. The in vitro test indicated the formation of CaP‐like hydroxyapatite particles on the surface of the 50% bioceramic modified with gelatin calcined at 900°C.
- 18 May 2023
- Published by Wiley in Surface and Interface Analysis
- Vol. 55 (9) , 683-693
Effect of the culture medium on the behavior of the austenitic stainless steel with the specific 316L grade
The use of 316L stainless steel as an orthopedic bone plate material or as a substrate for coating implies the need to study its properties in a biological medium simulating human body environment. Therefore, the aim of this work is to investigate the microstructural characteristics, corrosion resistance, and mechanical properties of 316L stainless steel in the culture medium and then to check the cytotoxicity of the stainless steel in the presence of human mesenchymal stem cells. The characteristics of the stainless steel were evaluated by studying the microstructure of the samples in untreated state and after soaking in minimum essential medium‐alpha (α‐MEM) for 7 days. The results indicated the formation on the surface of the 316L stainless steel of goethite and deposits composed of Ca and P with porous and amorphous structures, which led to the decrease in the elastic modulus and the hardness of the soaked stainless steel as shown by nanoindentation test. Nevertheless, the hardness and the elastic modulus of the steel after soaking were influenced only for a surface depth of approximately 0.1% of the thickness of the sample. The potentiodynamic polarization curves exhibited that the corrosion resistance of the soaked stainless steel was reduced because of the higher passive current density. However, it should be noticed that the breakdown potential of the steel after soaking was slightly higher, leading to a wider range of passivation. In addition, microscopy examination showed the mesenchymal stem cell adhesion on the materials after 9 days of culture.
- 18 May 2023
- Published by Wiley in Surface and Interface Analysis
- Vol. 55 (9) , 683-693
Effect of the culture medium on the behavior of the austenitic stainless steel with the specific 316L grade
The use of 316L stainless steel as an orthopedic bone plate material or as a substrate for coating implies the need to study its properties in a biological medium simulating human body environment. Therefore, the aim of this work is to investigate the microstructural characteristics, corrosion resistance, and mechanical properties of 316L stainless steel in the culture medium and then to check the cytotoxicity of the stainless steel in the presence of human mesenchymal stem cells. The characteristics of the stainless steel were evaluated by studying the microstructure of the samples in untreated state and after soaking in minimum essential medium‐alpha (α‐MEM) for 7 days. The results indicated the formation on the surface of the 316L stainless steel of goethite and deposits composed of Ca and P with porous and amorphous structures, which led to the decrease in the elastic modulus and the hardness of the soaked stainless steel as shown by nanoindentation test. Nevertheless, the hardness and the elastic modulus of the steel after soaking were influenced only for a surface depth of approximately 0.1% of the thickness of the sample. The potentiodynamic polarization curves exhibited that the corrosion resistance of the soaked stainless steel was reduced because of the higher passive current density. However, it should be noticed that the breakdown potential of the steel after soaking was slightly higher, leading to a wider range of passivation. In addition, microscopy examination showed the mesenchymal stem cell adhesion on the materials after 9 days of culture.
- Open Access
- 30 December 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 939 (1) , 012027
The hardness of the hydroxyapatite-titania bilayer coatings by microindentation and nanoindentation testing
- 30 December 2017
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 939 (1) , 012027
Open AccessThe hardness of the hydroxyapatite-titania bilayer coatings by microindentation and nanoindentation testing
- 1 May 2017
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 48 (7) , 3570-3582
Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application
- 1 May 2017
- Published by Springer Nature in Metallurgical and Materials Transactions A
- Vol. 48 (7) , 3570-3582
Hydroxyapatite-TiO2-SiO2-Coated 316L Stainless Steel for Biomedical Application
- 1 March 2017
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 72, 650-658
Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings
- 1 March 2017
- Published by Elsevier in Materials Science and Engineering: C
- Vol. 72, 650-658
Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings
- 17 August 2016
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 27 (9) , 140
New synthesis method of HA/P(D,L)LA composites: study of fibronectin adsorption and their effects in osteoblastic behavior for bone tissue engineering
A novel synthetic method to synthesize hydroxyapatite/poly (D,L) lactic acid biocomposite is presented in this study by mixing only the precursors hydroxyapatite and (D,L) LA monomer without adding neither solvent nor catalyst. Three compositions were successfully synthesized with the weight ratios of 1/1, 1/3, and 3/5 (hydroxyapatite/(D,L) lactic acid), and the grafting efficiency of poly (D,L) lactic acid on hydroxyapatite surface reaches up to 84 %. Scanning electron microscopy and Fourier transform infrared spectroscopy showed that the hydroxyapatite particles were successfully incorporated into the poly (D,L) lactic acid polymer and X ray diffraction analysis showed that hydroxyapatite preserved its crystallinity after poly (D,L) lactic acid grafting. Differential scanning calorimetry shows that Tg of hydroxyapatite/poly (D,L) lactic acid composite is less than Tg of pure poly (D,L) lactic acid, which facilitates the shaping of the composite obtained. The addition of poly (D,L) lactic acid improves the adsorption properties of hydroxyapatite for fibronectin extracellular matrix protein. Furthermore, the presence of poly (D,L) lactic acid on hydroxyapatite surface coated with fibronectin enhanced pre-osteoblast STRO-1 adhesion and cell spreading. These results show the promising potential of hydroxyapatite/poly (D,L) lactic acid composite as a bone substitute material for orthopedic applications and bone tissue engineering.
- 17 August 2016
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 27 (9) , 140
New synthesis method of HA/P(D,L)LA composites: study of fibronectin adsorption and their effects in osteoblastic behavior for bone tissue engineering
A novel synthetic method to synthesize hydroxyapatite/poly (D,L) lactic acid biocomposite is presented in this study by mixing only the precursors hydroxyapatite and (D,L) LA monomer without adding neither solvent nor catalyst. Three compositions were successfully synthesized with the weight ratios of 1/1, 1/3, and 3/5 (hydroxyapatite/(D,L) lactic acid), and the grafting efficiency of poly (D,L) lactic acid on hydroxyapatite surface reaches up to 84 %. Scanning electron microscopy and Fourier transform infrared spectroscopy showed that the hydroxyapatite particles were successfully incorporated into the poly (D,L) lactic acid polymer and X ray diffraction analysis showed that hydroxyapatite preserved its crystallinity after poly (D,L) lactic acid grafting. Differential scanning calorimetry shows that Tg of hydroxyapatite/poly (D,L) lactic acid composite is less than Tg of pure poly (D,L) lactic acid, which facilitates the shaping of the composite obtained. The addition of poly (D,L) lactic acid improves the adsorption properties of hydroxyapatite for fibronectin extracellular matrix protein. Furthermore, the presence of poly (D,L) lactic acid on hydroxyapatite surface coated with fibronectin enhanced pre-osteoblast STRO-1 adhesion and cell spreading. These results show the promising potential of hydroxyapatite/poly (D,L) lactic acid composite as a bone substitute material for orthopedic applications and bone tissue engineering.
- 1 October 2015
- Published by Elsevier in Thin Solid Films
- Vol. 593, 71-80
Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film
- 1 October 2015
- Published by Elsevier in Thin Solid Films
- Vol. 593, 71-80
Study of the mechanical behavior and corrosion resistance of hydroxyapatite sol–gel thin coatings on 316 L stainless steel pre-coated with titania film
- 24 June 2015
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 46 (5) , 2340-2347
Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method
- 24 June 2015
- Published by Springer Nature in Metallurgical and Materials Transactions B
- Vol. 46 (5) , 2340-2347
Morphological and Mechanical Properties of Hydroxyapatite Bilayer Coatings Deposited on 316L SS by Sol–Gel Method
- 25 June 2013
- Published by Springer Nature in Journal of Materials Science
- Vol. 48 (20) , 7215-7223
Surface modification of natural and synthetic hydroxyapatites powders by grafting polypyrrole
- 25 June 2013
- Published by Springer Nature in Journal of Materials Science
- Vol. 48 (20) , 7215-7223
Surface modification of natural and synthetic hydroxyapatites powders by grafting polypyrrole
- 1 July 2012
- Published by Elsevier in Applied Surface Science
- Vol. 258 (18) , 7021-7030
Electrochemical depositions of fluorohydroxyapatite doped by Cu2+, Zn2+, Ag+ on stainless steel substrates
- 1 July 2012
- Published by Elsevier in Applied Surface Science
- Vol. 258 (18) , 7021-7030
Electrochemical depositions of fluorohydroxyapatite doped by Cu2+, Zn2+, Ag+ on stainless steel substrates