Xiaoming Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoming Guo has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Dongsen Mao
Shanghai Institute of Technology
9 shared publications - Jun Yu
School of Chemical and Environmental Engineering, Shanghai Institute of Technology, Shanghai 201418, China
5 shared publications Tao Meng
Faculty of Chemical Engineering and Energy Technology, Shanghai Institute of Technology, Shanghai, PR China
5 shared publicationsDongsen Mao
Research Institute of Applied Catalysis, School of Chemical and Environmental Engineering, Shanghai Institute of Technology, Shanghai 201418, P. R. China
3 shared publicationsHongyan Xue
Research Institute of Applied Catalysis, School of Chemical and Environmental Engineering, Shanghai Institute of Technology, Shanghai, People’s Republic of China
3 shared publicationsJun Yu
School of Chemical and Environmental Engineering, Shanghai Institute of Technology, Shanghai, PR China
3 shared publications
Latest Publications
- 25 July 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (8) , 235
The Role of Fe in NiFe/CeO2 Catalysts for Low-Temperature CO2 Methanation
- 25 July 2026
- Published by Springer Nature in Catalysis Letters
- Vol. 156 (8) , 235
The Role of Fe in NiFe/CeO2 Catalysts for Low-Temperature CO2 Methanation
- 8 February 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (7) , 3645-3653
Activity Improvement of Mn/Al2O3 for NH3-SCR Reaction via the Rare-Earth (Ce, La, Nd and Y) Oxides Modification
- 8 February 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (7) , 3645-3653
Activity Improvement of Mn/Al2O3 for NH3-SCR Reaction via the Rare-Earth (Ce, La, Nd and Y) Oxides Modification
- Open Access
- 31 October 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (45) , 41224-41235
Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate over Boron-Modified Ag/SiO2 Catalysts
The addition of boron (B) as a promoter to the Ag/SiO2 catalyst for the selective hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) was investigated. A comparison of the preparation method for incorporation of B found that the addition during the ammonia evaporation deposition–precipitation synthesis of the Ag/SiO2 catalyst (Ag–B/SiO2) was inferior to incipient wetness impregnation introduction of the Ag/SiO2 catalyst (B/Ag/SiO2). Moreover, the effects of B contents (0.5–5 wt %) on the physicochemical properties and catalytic performance of the B/Ag/SiO2 catalysts were investigated by XRF, N2-physisorption, XRD, FTIR, TEM, EDX mapping, H2-TPR, NH3-TPD, XPS, and catalytic testing. The results indicated that both the catalytic activity and stability of the Ag/SiO2 catalyst were noticeably enhanced after the introduction of B. The B/Ag/SiO2 catalyst with 1 wt % B showed the best catalytic performance of 100% DMO conversion and 88.3% MG selectivity, which could be attributed to the highest dispersion of the active metal and the smallest Ag particle size stabilized by the strong interaction between silver and boron species.
- 31 October 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (45) , 41224-41235
Open AccessSelective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate over Boron-Modified Ag/SiO2 Catalysts
The addition of boron (B) as a promoter to the Ag/SiO2 catalyst for the selective hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) was investigated. A comparison of the preparation method for incorporation of B found that the addition during the ammonia evaporation deposition–precipitation synthesis of the Ag/SiO2 catalyst (Ag–B/SiO2) was inferior to incipient wetness impregnation introduction of the Ag/SiO2 catalyst (B/Ag/SiO2). Moreover, the effects of B contents (0.5–5 wt %) on the physicochemical properties and catalytic performance of the B/Ag/SiO2 catalysts were investigated by XRF, N2-physisorption, XRD, FTIR, TEM, EDX mapping, H2-TPR, NH3-TPD, XPS, and catalytic testing. The results indicated that both the catalytic activity and stability of the Ag/SiO2 catalyst were noticeably enhanced after the introduction of B. The B/Ag/SiO2 catalyst with 1 wt % B showed the best catalytic performance of 100% DMO conversion and 88.3% MG selectivity, which could be attributed to the highest dispersion of the active metal and the smallest Ag particle size stabilized by the strong interaction between silver and boron species.
- Open Access
- 26 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (3) , 407
Ni-Modified Ag/SiO2 Catalysts for Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate
Ni-modified Ag/SiO2 catalysts containing 0~3 wt.% Ni were obtained by impregnating Ni species onto Ag/SiO2 followed by calcination and reduction. The catalysts’ performance in the hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) was tested. Ag-0.5%Ni/SiO2 showed the highest catalytic activity among these catalysts and exhibited excellent catalytic stability. The effects of the Ni content on the structure and surface chemical states of catalysts were investigated by XRF, N2-sorption, XRD, TEM, EDX-mapping, FT-IR, H2-TPR, UV–vis, and XPS. The better catalytic activity and stability of Ni-modified Ag/SiO2 (versus Ag/SiO2) are ascribed to the improved dispersion of active Ag species as well as the higher resistance to the growth of Ag particles due to the presence of Ni species.
- 26 January 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (3) , 407
Open AccessNi-Modified Ag/SiO2 Catalysts for Selective Hydrogenation of Dimethyl Oxalate to Methyl Glycolate
Ni-modified Ag/SiO2 catalysts containing 0~3 wt.% Ni were obtained by impregnating Ni species onto Ag/SiO2 followed by calcination and reduction. The catalysts’ performance in the hydrogenation of dimethyl oxalate (DMO) to methyl glycolate (MG) was tested. Ag-0.5%Ni/SiO2 showed the highest catalytic activity among these catalysts and exhibited excellent catalytic stability. The effects of the Ni content on the structure and surface chemical states of catalysts were investigated by XRF, N2-sorption, XRD, TEM, EDX-mapping, FT-IR, H2-TPR, UV–vis, and XPS. The better catalytic activity and stability of Ni-modified Ag/SiO2 (versus Ag/SiO2) are ascribed to the improved dispersion of active Ag species as well as the higher resistance to the growth of Ag particles due to the presence of Ni species.
- 8 December 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (2) , 696-704
Synthesis of C 2 oxygenates from syngas over UiO-66 supported Rh–Mn catalysts: the effect of functional groups
UiO-66 and its modified forms (UiO-66-NH2 and UiO-66-OH) were used as supports to prepare Rh–Mn catalysts by using a co-impregnation method, and their catalytic activities were investigated for the direct synthesis of ethanol-based C2 + oxygenates from CO hydrogenation. The catalysts were comprehensively characterized using N2 sorption, XRD, XPS, DRIFT, and TPSR analyses. The structural and textural properties of the catalysts clearly show that Rh and Mn are highly dispersed in the pores of MOFs, but the order of the original structure is partially sacrificed due to the loading of metals and the synergistic effect of Rh, Mn, and Zr would be influenced by various functional groups present in UiO-66. On combining both in situ FT-IR and TPSR analyses, it is confirmed that the higher number of active sites of Rh0 on RM/UiO-66 promotes the CO dissociation ability and hydrogenation rate, which result in its best catalytic activity with the highest yield of C2 + oxygenates, 197.3 g (kg h)−1.
- 8 December 2020
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 45 (2) , 696-704
Synthesis of C 2 oxygenates from syngas over UiO-66 supported Rh–Mn catalysts: the effect of functional groups
UiO-66 and its modified forms (UiO-66-NH2 and UiO-66-OH) were used as supports to prepare Rh–Mn catalysts by using a co-impregnation method, and their catalytic activities were investigated for the direct synthesis of ethanol-based C2 + oxygenates from CO hydrogenation. The catalysts were comprehensively characterized using N2 sorption, XRD, XPS, DRIFT, and TPSR analyses. The structural and textural properties of the catalysts clearly show that Rh and Mn are highly dispersed in the pores of MOFs, but the order of the original structure is partially sacrificed due to the loading of metals and the synergistic effect of Rh, Mn, and Zr would be influenced by various functional groups present in UiO-66. On combining both in situ FT-IR and TPSR analyses, it is confirmed that the higher number of active sites of Rh0 on RM/UiO-66 promotes the CO dissociation ability and hydrogenation rate, which result in its best catalytic activity with the highest yield of C2 + oxygenates, 197.3 g (kg h)−1.
- 19 October 2020
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (24) , 8383-8395
Facile preparation of highly active and stable CuO–CeO 2 catalysts for low-temperature CO oxidation via a direct solvothermal method
CuO–CeO 2 catalysts prepared by a direct solvothermal method exhibit high activity and stability for low-temperature CO oxidation.
- 19 October 2020
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (24) , 8383-8395
Facile preparation of highly active and stable CuO–CeO 2 catalysts for low-temperature CO oxidation via a direct solvothermal method
CuO–CeO 2 catalysts prepared by a direct solvothermal method exhibit high activity and stability for low-temperature CO oxidation.
- 31 July 2020
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (18) , 6368-6377
Significantly enhanced Pb resistance of a Co-modified Mn–Ce–Ox/TiO2 catalyst for low-temperature NH3-SCR of NOx
Co modification can significantly improve the performance for low-temperature NH3-SCR of NOx and the Pb resistance of the Mn–Ce–Ox/TiO2 catalyst.
- 31 July 2020
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 10 (18) , 6368-6377
Significantly enhanced Pb resistance of a Co-modified Mn–Ce–Ox/TiO2 catalyst for low-temperature NH3-SCR of NOx
Co modification can significantly improve the performance for low-temperature NH3-SCR of NOx and the Pb resistance of the Mn–Ce–Ox/TiO2 catalyst.
- Open Access
- 25 November 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (66) , 38477-38485
Enhanced resistance to calcium poisoning on Zr-modified Cu/ZSM-5 catalysts for the selective catalytic reduction of NO with NH3
After calcium impregnation, NOx conversion over the Cu/Z catalyst decreased by 11.3–24.3%, while that over Zr0.10/Cu/Z only decreased by 3.8–12.2%.
- 25 November 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (66) , 38477-38485
Open AccessEnhanced resistance to calcium poisoning on Zr-modified Cu/ZSM-5 catalysts for the selective catalytic reduction of NO with NH3
After calcium impregnation, NOx conversion over the Cu/Z catalyst decreased by 11.3–24.3%, while that over Zr0.10/Cu/Z only decreased by 3.8–12.2%.