José Pablo Aguiar-Moya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
José Pablo Aguiar-Moya has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Alejandra Baldi-Sevilla
National Laboratory of Materials and Structural Models (LanammeUCR), Universidad de Costa Rica, San José, Costa Rica
6 shared publications Jorge Salazar-Delgado
National Laboratory of Materials and Structural Models (LanammeUCR), Universidad de Costa Rica, San José, Costa Rica
4 shared publications- Luis Loria-Salazar
Isaac Newton University
3 shared publications - Rafael Ernesto Villegas-Villegas
Universidad de Costa Rica
3 shared publications Edgar Camacho-Garita
LanammeUCR, University of Costa Rica, San José, Costa Rica
2 shared publicationsFabricio Leiva-Villacorta
LanammeUCR
2 shared publications
Latest Publications
- 24 December 2024
- Published by Springer Nature
- p. 741-745
Morphological Analysis of Asphalt Oxidation and Its Relationship with Changes in Its Chemical and Thermo-rheological Properties
- 24 December 2024
- Published by Springer Nature
- p. 741-745
Morphological Analysis of Asphalt Oxidation and Its Relationship with Changes in Its Chemical and Thermo-rheological Properties
- 1 July 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 1877
Editorial: Special Section from the International Society of Asphalt Pavements (ISAP) Symposium 2022
This Special Section of the ASTM International Journal of Testing and Evaluation is composed of 33 papers from the International Society for Asphalt Pavements (ISAP) 2022 Symposium in Costa Rica. ISAP is a volunteer organization of professionals and experts in asphalt engineering whose goal is to share the latest in leading-edge asphalt pavement technology worldwide. Every 4 years, ISAP organizes the ISAP Symposium, which in 2022 was held in San José, Costa Rica, from October 25 to 27. Researchers and engineers from different countries attended, presenting and discussing ideas on a wide range of topics related to pavement infrastructure. The event made it possible to share and increase knowledge to allow the development of increasingly innovative and sustainable solutions to improve infrastructure while respecting the environment and people. The 33 original technical manuscripts in this Special Section are improved versions of selected 6-page papers from the ISAP 2022 Symposium. They were all peer-reviewed according to the high standards of the Journal of Testing and Evaluation. The ISAP 2022 Symposium was coordinated with the activities of the ISAP Technical committees: Asphalt Pavement and Environment and Pavement Field Evaluation. The ISAP 2022 Symposium was organized by Professor Luis G. Loria-Salazar (Conference Chairman, Isaac Newton University, Costa Rica) and Professor Gabriele Tebaldi (Conference Chairman, University of Parma, Italy, and University of Florida, USA).
- 1 July 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 1877
Editorial: Special Section from the International Society of Asphalt Pavements (ISAP) Symposium 2022
This Special Section of the ASTM International Journal of Testing and Evaluation is composed of 33 papers from the International Society for Asphalt Pavements (ISAP) 2022 Symposium in Costa Rica. ISAP is a volunteer organization of professionals and experts in asphalt engineering whose goal is to share the latest in leading-edge asphalt pavement technology worldwide. Every 4 years, ISAP organizes the ISAP Symposium, which in 2022 was held in San José, Costa Rica, from October 25 to 27. Researchers and engineers from different countries attended, presenting and discussing ideas on a wide range of topics related to pavement infrastructure. The event made it possible to share and increase knowledge to allow the development of increasingly innovative and sustainable solutions to improve infrastructure while respecting the environment and people. The 33 original technical manuscripts in this Special Section are improved versions of selected 6-page papers from the ISAP 2022 Symposium. They were all peer-reviewed according to the high standards of the Journal of Testing and Evaluation. The ISAP 2022 Symposium was coordinated with the activities of the ISAP Technical committees: Asphalt Pavement and Environment and Pavement Field Evaluation. The ISAP 2022 Symposium was organized by Professor Luis G. Loria-Salazar (Conference Chairman, Isaac Newton University, Costa Rica) and Professor Gabriele Tebaldi (Conference Chairman, University of Parma, Italy, and University of Florida, USA).
- 26 April 2023
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 25 (sup1) , 218-229
Relationship between crossover modulus and asphalt chemistry to oxidation process based on the RHEO + method
Fatigue damage is related to low-temperature conditions. Under this assumption, a question arises: why does fatigue occur at temperatures at which it should not and what methods should be used to study this phenomenon? Additionally, it is well known that oxidation causes asphalt to become brittle. Therefore, oxidation is usually associated with fatigue. As asphalt oxidizes, it changes its chemical composition affecting its rheology, the polarity increases, causing more rigid molecular structures to appear that directly affects its elastic response in turn. Consequently, the aim of this study is to propose a tool that relates chemistry and rheology. The method RHEO-PLUS (RHEO+) offers the possibility of correlating the viscoelastic mechanical properties measured in the rheometer, with the changes in the chemical composition of the oxidised asphalt. Based on RHEO+ it is possible to recognise whether the binder is in optimal conditions, aged (by loss of volatile fraction), or oxidised.
- 26 April 2023
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 25 (sup1) , 218-229
Relationship between crossover modulus and asphalt chemistry to oxidation process based on the RHEO + method
Fatigue damage is related to low-temperature conditions. Under this assumption, a question arises: why does fatigue occur at temperatures at which it should not and what methods should be used to study this phenomenon? Additionally, it is well known that oxidation causes asphalt to become brittle. Therefore, oxidation is usually associated with fatigue. As asphalt oxidizes, it changes its chemical composition affecting its rheology, the polarity increases, causing more rigid molecular structures to appear that directly affects its elastic response in turn. Consequently, the aim of this study is to propose a tool that relates chemistry and rheology. The method RHEO-PLUS (RHEO+) offers the possibility of correlating the viscoelastic mechanical properties measured in the rheometer, with the changes in the chemical composition of the oxidised asphalt. Based on RHEO+ it is possible to recognise whether the binder is in optimal conditions, aged (by loss of volatile fraction), or oxidised.
- 18 November 2022
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 2245-2259
Six Sigma Production Implementation of PET-Modified HMA – A Latin American Case Study
The increase in consumption of goods and products, mainly of disposable products, at the global level has resulted in a considerable impact to the environment. Specifically, waste plastics can be associated with an extremely high social cost and can greatly affect the local environment when not properly discarded. The United Nations Environment Programme estimates that 6.4 million tons of garbage end up in the oceans at an alarming rate of 200 kg per second. Plastics represent 80 % of these wastes. This paper proposes the use of waste plastics in the production of hot mix asphalt (HMA) based on a process production implementation using the identify, define, optimize, and validate Six Sigma methodology for quality control assurance. The procedure involved consumer use requirements, material analysis, HMA design, production design, quality control processes, and, finally, the construction of test sections in two different countries in Latin America: Costa Rica and Bolivia. One of the challenges documented in the paper was the implementation of the waste material-modified HMA on small, local producer facilities while meeting all production requirements to ensure the success of the process. Also, based on circularity principles, the project represents a revolution regarding the implementation of a linear production system within a circular process that is partly intended to ensure that the footprint of waste plastics on the environment is reduced while taking advantage of the properties of the waste polymers to improve the performance of the modified HMA.
- 18 November 2022
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 2245-2259
Six Sigma Production Implementation of PET-Modified HMA – A Latin American Case Study
The increase in consumption of goods and products, mainly of disposable products, at the global level has resulted in a considerable impact to the environment. Specifically, waste plastics can be associated with an extremely high social cost and can greatly affect the local environment when not properly discarded. The United Nations Environment Programme estimates that 6.4 million tons of garbage end up in the oceans at an alarming rate of 200 kg per second. Plastics represent 80 % of these wastes. This paper proposes the use of waste plastics in the production of hot mix asphalt (HMA) based on a process production implementation using the identify, define, optimize, and validate Six Sigma methodology for quality control assurance. The procedure involved consumer use requirements, material analysis, HMA design, production design, quality control processes, and, finally, the construction of test sections in two different countries in Latin America: Costa Rica and Bolivia. One of the challenges documented in the paper was the implementation of the waste material-modified HMA on small, local producer facilities while meeting all production requirements to ensure the success of the process. Also, based on circularity principles, the project represents a revolution regarding the implementation of a linear production system within a circular process that is partly intended to ensure that the footprint of waste plastics on the environment is reduced while taking advantage of the properties of the waste polymers to improve the performance of the modified HMA.
- 3 March 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (3) , 744-760
Improving the accuracy of mineral aggregate surface energy estimation based on goniometry
Goniometry is a low time-consuming technique used to determine contact angle of a variety of surfaces, which can be related to surface energy of materials and, therefore, to moisture susceptibility of asphalt mixtures. Given the importance of the technique, due to simplicity and wide range of applicability, it is essential to obtain reliable data, mainly for heterogeneous, rough surfaces, such as mineral aggregates. For this reason, this study focuses on reducing variability of contact angle data for surface energy determination of mineral aggregates, by controlling surface preparation, performing corrections due to surface roughness, reaching and measuring quasi-equilibrium for each drop. Based on factorial analysis, it was found that the factors that have a greater effect on contact angle values are the type of mineral aggregate and variables affecting the surface preparation of the samples. This study helps to ensure a more accurate determination of surface energy in mineral aggregates by means of goniometry.
- 3 March 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (3) , 744-760
Improving the accuracy of mineral aggregate surface energy estimation based on goniometry
Goniometry is a low time-consuming technique used to determine contact angle of a variety of surfaces, which can be related to surface energy of materials and, therefore, to moisture susceptibility of asphalt mixtures. Given the importance of the technique, due to simplicity and wide range of applicability, it is essential to obtain reliable data, mainly for heterogeneous, rough surfaces, such as mineral aggregates. For this reason, this study focuses on reducing variability of contact angle data for surface energy determination of mineral aggregates, by controlling surface preparation, performing corrections due to surface roughness, reaching and measuring quasi-equilibrium for each drop. Based on factorial analysis, it was found that the factors that have a greater effect on contact angle values are the type of mineral aggregate and variables affecting the surface preparation of the samples. This study helps to ensure a more accurate determination of surface energy in mineral aggregates by means of goniometry.
- 26 September 2021
- Published by Springer Nature
- p. 473-479
Comprehensive Model for the Prediction of the Phase Angle Master Curve of Asphalt Concrete Mixes
- 26 September 2021
- Published by Springer Nature
- p. 473-479
Comprehensive Model for the Prediction of the Phase Angle Master Curve of Asphalt Concrete Mixes
- 30 July 2019
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 48 (1) , 235-246
Effect of Moisture on Full-Scale Pavement Distress
The effect of moisture is fundamental in determining pavement responses. It becomes more important in tropical regions where high precipitation rates and high variability in water table levels are present. The results indicate that when comparing the quantitative performance of pavement sections that are subjected to near saturation conditions, the bearing capacity of the pavement structure can be as low as 5 % of that associated to the same structure but with optimum water content. The damage in the saturated pavement sections is greatly accelerated because of pumping of fines from the subgrade and the subbase. All the pavement layers are affected by loading (decrease or increase in layer moduli) but to a different degree depending on the moisture conditions. Furthermore, the effect of moisture is greater in the cohesive soils and contaminated granular materials. Finally, the relatively stiffer layers (i.e., hot mix asphalt and cement-treated base layers) are the ones that are more susceptible to a higher deterioration rate, particularly under saturated or near saturated conditions.
- 30 July 2019
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 48 (1) , 235-246
Effect of Moisture on Full-Scale Pavement Distress
The effect of moisture is fundamental in determining pavement responses. It becomes more important in tropical regions where high precipitation rates and high variability in water table levels are present. The results indicate that when comparing the quantitative performance of pavement sections that are subjected to near saturation conditions, the bearing capacity of the pavement structure can be as low as 5 % of that associated to the same structure but with optimum water content. The damage in the saturated pavement sections is greatly accelerated because of pumping of fines from the subgrade and the subbase. All the pavement layers are affected by loading (decrease or increase in layer moduli) but to a different degree depending on the moisture conditions. Furthermore, the effect of moisture is greater in the cohesive soils and contaminated granular materials. Finally, the relatively stiffer layers (i.e., hot mix asphalt and cement-treated base layers) are the ones that are more susceptible to a higher deterioration rate, particularly under saturated or near saturated conditions.
- 19 June 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (5) , 560-569
A synthesis of the first full-scale experiment in Central America
The initial full-scale experiment in Costa Rica began in 2012 under a program that has been identified as PaveLab. The main purposes were to identify the effect of typical construction practices in the country: use of granular vs. cement-treated bases (CTB), and thin vs. thick HMA layers. The effect of moisture was also considered: sections under optimal moisture conditions were compared to sections where the water table was raised to approximately the middle of the subbase. The recorded information includes: stress and strain measurements for the top layers of the structure, vertical pressure in supporting layers, surface roughness and deflection data. Preliminary results show the importance of considering the effect of water on the stability of pavement structures. It was noted that even though the CTB layer showed higher initial stiffness as compared to a granular base, the loss of stiffness associated to load-induced damage occurred at a significantly higher rate than that observed at the other layers. Similarly, the results showed that an increase in HMA layer thickness results in higher overall structural capacity, independent of the supporting layers. The data is currently being used to calibrate fatigue, permanent deformation and surface roughness transfer functions.
- 19 June 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (5) , 560-569
A synthesis of the first full-scale experiment in Central America
The initial full-scale experiment in Costa Rica began in 2012 under a program that has been identified as PaveLab. The main purposes were to identify the effect of typical construction practices in the country: use of granular vs. cement-treated bases (CTB), and thin vs. thick HMA layers. The effect of moisture was also considered: sections under optimal moisture conditions were compared to sections where the water table was raised to approximately the middle of the subbase. The recorded information includes: stress and strain measurements for the top layers of the structure, vertical pressure in supporting layers, surface roughness and deflection data. Preliminary results show the importance of considering the effect of water on the stability of pavement structures. It was noted that even though the CTB layer showed higher initial stiffness as compared to a granular base, the loss of stiffness associated to load-induced damage occurred at a significantly higher rate than that observed at the other layers. Similarly, the results showed that an increase in HMA layer thickness results in higher overall structural capacity, independent of the supporting layers. The data is currently being used to calibrate fatigue, permanent deformation and surface roughness transfer functions.
- Open Access
- 16 April 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (8) , 2276
Carbon Footprint Estimation in Road Construction: La Abundancia–Florencia Case Study
The environmental impact of road construction and rehabilitation can be associated with the increase of greenhouse gas (GHG) emissions, which are highly related to climate change. Consequently, departments of transportation have recently focused on the development and implementation of tools to evaluate the performance of projects and minimize GHG emissions. An example is the use of life cycle assessment (LCA) to analyze and quantify the environmental impact of a product, system, or process, from cradle to grave. In this regard, the present case study quantifies the carbon footprint associated with the construction of the La Abundancia–Florencia highway, located in the province of San Carlos in Costa Rica. The analysis is also intended to generate consciousness both in the public and private sectors on the environmental impacts of road construction. After an LCA study, it was determined that the construction of the hot mix asphalt (HMA) layer generates a carbon footprint of 65.8 kg of CO2e per km of road. In addition, it was evident that HMA production generates the greatest environmental impact, among all the considered LCA production and construction stages, with a GHG contribution of 38% to 39% from bitumen only. Consequently, special attention to HMA production is required in order to minimize GHG emissions.
- 16 April 2019
- Published by MDPI AG in Sustainability
- Vol. 11 (8) , 2276
Open AccessCarbon Footprint Estimation in Road Construction: La Abundancia–Florencia Case Study
The environmental impact of road construction and rehabilitation can be associated with the increase of greenhouse gas (GHG) emissions, which are highly related to climate change. Consequently, departments of transportation have recently focused on the development and implementation of tools to evaluate the performance of projects and minimize GHG emissions. An example is the use of life cycle assessment (LCA) to analyze and quantify the environmental impact of a product, system, or process, from cradle to grave. In this regard, the present case study quantifies the carbon footprint associated with the construction of the La Abundancia–Florencia highway, located in the province of San Carlos in Costa Rica. The analysis is also intended to generate consciousness both in the public and private sectors on the environmental impacts of road construction. After an LCA study, it was determined that the construction of the hot mix asphalt (HMA) layer generates a carbon footprint of 65.8 kg of CO2e per km of road. In addition, it was evident that HMA production generates the greatest environmental impact, among all the considered LCA production and construction stages, with a GHG contribution of 38% to 39% from bitumen only. Consequently, special attention to HMA production is required in order to minimize GHG emissions.