Huizhou Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Huizhou Liu has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Mo Xian
CAS Key Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
16 shared publications - Mo Xian
CAS Key Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, China
8 shared publications - Yujin Cao
CAS Key Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
8 shared publications - Guang Zhao
State Key Laboratory of Microbial Technology, Shandong University, Qingdao, China
7 shared publications - Rubing Zhang
CAS Key Laboratory of Bio-based Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao, China
7 shared publications Wei Liu
CAS Key Laboratory of Biobased Materials, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101, China
5 shared publications
Latest Publications
- Open Access
- 2 April 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (14) , 7745-7750
An Aminotransferase from Enhydrobacter aerosaccus to Obtain Optically Pure β-Phenylalanine
An aminotransferase ω-TAEn was identified from Enhydrobacter aerosaccus. The ω-TAEn was successfully expressed in Escherichia coli and the obtained enzyme showed activity toward β-phenylalanine (β-phe) at optimal conditions. For optically pure (R)-β-phe, 50% yield was observed by kinetic resolution of racemic amino with pyruvate as the amino acceptor. To obtain (S)-β-phe, the lipase/ω-TAEn catalytic system was adopted. The ω-TAEn showed strict stereoselectivity to the amino donor. The formation of (S)-β-phe was observed using 3-aminobutyric acid as the amino donor, and (S)-β-phe was obtained by asymmetric synthesis with a yield of 82%.
- 2 April 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (14) , 7745-7750
Open AccessAn Aminotransferase from Enhydrobacter aerosaccus to Obtain Optically Pure β-Phenylalanine
An aminotransferase ω-TAEn was identified from Enhydrobacter aerosaccus. The ω-TAEn was successfully expressed in Escherichia coli and the obtained enzyme showed activity toward β-phenylalanine (β-phe) at optimal conditions. For optically pure (R)-β-phe, 50% yield was observed by kinetic resolution of racemic amino with pyruvate as the amino acceptor. To obtain (S)-β-phe, the lipase/ω-TAEn catalytic system was adopted. The ω-TAEn showed strict stereoselectivity to the amino donor. The formation of (S)-β-phe was observed using 3-aminobutyric acid as the amino donor, and (S)-β-phe was obtained by asymmetric synthesis with a yield of 82%.
- Open Access
- 21 January 2020
- Published by Springer Nature in Journal of Biological Research-Thessaloniki
- Vol. 27 (1) , 1-10
Metabolic engineering of Escherichia coli for the utilization of ethanol
Background: The fuel ethanol industry has made tremendous progress in the last decades. Ethanol can be obtained by fermentation using a variety of biomass materials as the feedstocks. However, few studies have been conducted on ethanol utilization by microorganisms. The price of petroleum-derived ethanol, easily made by the hydrolysis of ethylene, is even lower than that of bioethanol. If ethanol can be metabolized by microorganisms to produce value-added chemicals, it will open a new door for the utilization of inexpensive ethanol resources. Results: We constructed an engineered Escherichia coli strain which could utilize ethanol as the sole carbon source. The alcohol dehydrogenase and aldehyde dehydrogenase from Aspergillus nidulans was introduced into E. coli and the recombinant strain acquired the ability to grow on ethanol. Cell growth continued when ethanol was supplied after glucose starvation and 2.24 g L−1 of ethanol was further consumed during the shake-flasks fermentation process. Then ethanol was further used for the production of mevalonic acid by heterologously expressing its biosynthetic pathway. Deuterium-labeled ethanol-D6 as the feedstock confirmed that mevalonic acid was synthesized from ethanol. Conclusions: This study demonstrated the possibility of using ethanol as the carbon source by engineered E. coli strains. It can serve as the basis for the construction of more robust strains in the future though the catabolic capacity of ethanol should be further improved.
- 21 January 2020
- Published by Springer Nature in Journal of Biological Research-Thessaloniki
- Vol. 27 (1) , 1-10
Open AccessMetabolic engineering of Escherichia coli for the utilization of ethanol
Background: The fuel ethanol industry has made tremendous progress in the last decades. Ethanol can be obtained by fermentation using a variety of biomass materials as the feedstocks. However, few studies have been conducted on ethanol utilization by microorganisms. The price of petroleum-derived ethanol, easily made by the hydrolysis of ethylene, is even lower than that of bioethanol. If ethanol can be metabolized by microorganisms to produce value-added chemicals, it will open a new door for the utilization of inexpensive ethanol resources. Results: We constructed an engineered Escherichia coli strain which could utilize ethanol as the sole carbon source. The alcohol dehydrogenase and aldehyde dehydrogenase from Aspergillus nidulans was introduced into E. coli and the recombinant strain acquired the ability to grow on ethanol. Cell growth continued when ethanol was supplied after glucose starvation and 2.24 g L−1 of ethanol was further consumed during the shake-flasks fermentation process. Then ethanol was further used for the production of mevalonic acid by heterologously expressing its biosynthetic pathway. Deuterium-labeled ethanol-D6 as the feedstock confirmed that mevalonic acid was synthesized from ethanol. Conclusions: This study demonstrated the possibility of using ethanol as the carbon source by engineered E. coli strains. It can serve as the basis for the construction of more robust strains in the future though the catabolic capacity of ethanol should be further improved.
- Open Access
- 13 January 2020
- Published by Springer Nature in Microbial Cell Factories
- Vol. 19 (1) , 1
Correction to: Enhancement of the catalytic activity of Isopentenyl diphosphate isomerase (IDI) from Saccharomyces cerevisiae through random and site-directed mutagenesis
The authors of this article [1] wish to draw the readers’ attention to their closely related paper, published in RSC Advances [2] which should have been cited in this article. The authors regret that there is unattributed overlap in text describing the construction of the plasmid coding for the biosynthetic pathway because of the commonly used research strategies between this article [1] and similar work presented in RSC Advances, although this does not affect the main scientific conclusion in this study.
- 13 January 2020
- Published by Springer Nature in Microbial Cell Factories
- Vol. 19 (1) , 1
Open AccessCorrection to: Enhancement of the catalytic activity of Isopentenyl diphosphate isomerase (IDI) from Saccharomyces cerevisiae through random and site-directed mutagenesis
The authors of this article [1] wish to draw the readers’ attention to their closely related paper, published in RSC Advances [2] which should have been cited in this article. The authors regret that there is unattributed overlap in text describing the construction of the plasmid coding for the biosynthetic pathway because of the commonly used research strategies between this article [1] and similar work presented in RSC Advances, although this does not affect the main scientific conclusion in this study.
- Top Cited PapersOpen Access
- 19 February 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-14
Electricigens in the anode of microbial fuel cells: pure cultures versus mixed communities
Microbial fuel cell (MFC) is an environmentally friendly technology for electricity harvesting from a variety of substrates. Microorganisms used as catalysts in the anodic chamber, which are termed as electricigens, play a major role in the operation of MFCs. This review provides an introduction to the currently identified electricigens on their taxonomical groups and electricity producing abilities. The mechanism of electron transfer from electricigens to electrode is highlighted. The performances of pure culture and mixed communities are compared particularly. It has been proved that the electricity generation capacity and the ability to adapt to the complex environment of MFC systems constructed by pure microbial cultures are less than the systems constructed by miscellaneous consortia. However, pure cultures are useful to clarify the electron transfer mechanism at the microbiological level and further reduce the complexity of mixed communities. Future research trends of electricigens in MFCs should be focused on screening, domestication, modification and optimization of multi-strains to improve their electrochemical activities. Although the MFC techniques have been greatly advanced during the past few years, the present state of this technology still requires to be combined with other processes for cost reduction.
- 19 February 2019
- Published by Springer Nature in Microbial Cell Factories
- Vol. 18 (1) , 1-14
Top Cited PapersOpen AccessElectricigens in the anode of microbial fuel cells: pure cultures versus mixed communities
Microbial fuel cell (MFC) is an environmentally friendly technology for electricity harvesting from a variety of substrates. Microorganisms used as catalysts in the anodic chamber, which are termed as electricigens, play a major role in the operation of MFCs. This review provides an introduction to the currently identified electricigens on their taxonomical groups and electricity producing abilities. The mechanism of electron transfer from electricigens to electrode is highlighted. The performances of pure culture and mixed communities are compared particularly. It has been proved that the electricity generation capacity and the ability to adapt to the complex environment of MFC systems constructed by pure microbial cultures are less than the systems constructed by miscellaneous consortia. However, pure cultures are useful to clarify the electron transfer mechanism at the microbiological level and further reduce the complexity of mixed communities. Future research trends of electricigens in MFCs should be focused on screening, domestication, modification and optimization of multi-strains to improve their electrochemical activities. Although the MFC techniques have been greatly advanced during the past few years, the present state of this technology still requires to be combined with other processes for cost reduction.
- 5 February 2019
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 103 (6) , 2597-2608
Improving the production of isoprene and 1,3-propanediol by metabolically engineered Escherichia coli through recycling redox cofactor between the dual pathways
The biosynthesis of isoprene by microorganisms is a promising green route. However, the yield of isoprene is limited due to the generation of excess NAD(P)H via the mevalonate (MVA) pathway, which converts more glucose into CO2 or undesired reduced by-products. The production of 1,3-propanediol (1,3-PDO) from glycerol is a typical NAD(P)H-consuming process, which restricts 1,3-PDO yield to ~ 0.7 mol/mol. In this study, we propose a strategy of redox cofactor balance by coupling the production of isoprene with 1,3-PDO fermentation. With the introduction and optimization of the dual pathways in an engineered Escherichia coli, ~ 85.2% of the excess NADPH from isoprene pathway was recycled for 1,3-PDO production. The best strain G05 simultaneously produced 665.2 mg/L isoprene and 2532.1 mg/L 1,3-PDO under flask fermentation conditions. The yields were 0.3 mol/mol glucose and 1.0 mol/mol glycerol, respectively, showing 3.3- and 4.3-fold improvements relative to either pathway independently. Since isoprene is a volatile organic compound (VOC) whereas 1,3-PDO is separated from the fermentation broth, their coproduction process does not increase the complexity or cost for the separation from each other. Hence, the presented strategy will be especially useful for developing efficient biocatalysts for other biofuels and biochemicals, which are driven by cofactor concentrations.
- 5 February 2019
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 103 (6) , 2597-2608
Improving the production of isoprene and 1,3-propanediol by metabolically engineered Escherichia coli through recycling redox cofactor between the dual pathways
The biosynthesis of isoprene by microorganisms is a promising green route. However, the yield of isoprene is limited due to the generation of excess NAD(P)H via the mevalonate (MVA) pathway, which converts more glucose into CO2 or undesired reduced by-products. The production of 1,3-propanediol (1,3-PDO) from glycerol is a typical NAD(P)H-consuming process, which restricts 1,3-PDO yield to ~ 0.7 mol/mol. In this study, we propose a strategy of redox cofactor balance by coupling the production of isoprene with 1,3-PDO fermentation. With the introduction and optimization of the dual pathways in an engineered Escherichia coli, ~ 85.2% of the excess NADPH from isoprene pathway was recycled for 1,3-PDO production. The best strain G05 simultaneously produced 665.2 mg/L isoprene and 2532.1 mg/L 1,3-PDO under flask fermentation conditions. The yields were 0.3 mol/mol glucose and 1.0 mol/mol glycerol, respectively, showing 3.3- and 4.3-fold improvements relative to either pathway independently. Since isoprene is a volatile organic compound (VOC) whereas 1,3-PDO is separated from the fermentation broth, their coproduction process does not increase the complexity or cost for the separation from each other. Hence, the presented strategy will be especially useful for developing efficient biocatalysts for other biofuels and biochemicals, which are driven by cofactor concentrations.
- Open Access
- 14 January 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-10
Manipulation of the precursor supply for high-level production of longifolene by metabolically engineered Escherichia coli
Longifolene is a naturally occurring tricyclic sesquiterpene widely used in many different fields. Up to now, this valuable terpene was mainly manufactured from the high-boiling fraction of certain pine resins. Microbial production can be a promising alternative to the extraction from natural plant sources. Here, we present the metabolic engineering strategy to assemble biosynthetic pathway for longifolene production in Escherichia coli. E. coli was rendered to produce longifolene by heterologously expressing a codon optimized longifolene synthase from Picea abies. Augmentation of the metabolic flux to farnesyl pyrophosphate (FPP) by different FPP synthases conferred a 1.8-fold increase in longifolene production. An additional enhancement of longifolene production (up to 2.64 mg/L) was achieved by introducing an exogenous mevalonate pathway. Under fed-batch conditions, the best-performing strain was able to produce 382 mg/L of longifolene in a 5 L bioreactor. These results demonstrated the feasibility of producing longifolene by microbial fermentation and could serve as the basis for the construction of more robust strains in the future.
- 14 January 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-10
Open AccessManipulation of the precursor supply for high-level production of longifolene by metabolically engineered Escherichia coli
Longifolene is a naturally occurring tricyclic sesquiterpene widely used in many different fields. Up to now, this valuable terpene was mainly manufactured from the high-boiling fraction of certain pine resins. Microbial production can be a promising alternative to the extraction from natural plant sources. Here, we present the metabolic engineering strategy to assemble biosynthetic pathway for longifolene production in Escherichia coli. E. coli was rendered to produce longifolene by heterologously expressing a codon optimized longifolene synthase from Picea abies. Augmentation of the metabolic flux to farnesyl pyrophosphate (FPP) by different FPP synthases conferred a 1.8-fold increase in longifolene production. An additional enhancement of longifolene production (up to 2.64 mg/L) was achieved by introducing an exogenous mevalonate pathway. Under fed-batch conditions, the best-performing strain was able to produce 382 mg/L of longifolene in a 5 L bioreactor. These results demonstrated the feasibility of producing longifolene by microbial fermentation and could serve as the basis for the construction of more robust strains in the future.
- 10 September 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 94 (1) , 276-287
A newly synthesized N,O group modified hypercrosslinked resin with effective uptake towards polyphenols from aqueous media: behavior and mechanism
BACKGROUND: A series of hypercrosslinked resins were synthesized by controlling the reaction conditions of the Friedel–Crafts reaction of chloromethylated polystyrene‐co‐divinylbenzene (St‐DVB‐Cl), which realized reasonable adjustment of pore structure, surface area and other physical properties. Based on this, a new N,O modified hypercrosslinked resin (St‐DVB‐NB‐AC2O) was successfully prepared by the innovative nitration system, and the adsorption behavior of St‐DVB‐NB‐AC2O was studied under different conditions. The adsorption mechanism between adsorbent and adsorbate was explained by frontier orbital theory and density functional theory.RESULTS: The adsorption capacity of polyphenols on the optimal hypercrosslinked resin (St‐DVB‐NB‐5) was 16.67% higher than that of the optimal commercial resin NDA150. Compared with St‐DVB‐NB‐5, the adsorption increment of hydroxyphenol on St‐DVB‐NB‐AC2O was 31.42%, which was 1.51–8.36 times higher than commercial materials. The Freundlich model was the most suitable for fitting the equilibrium data. However, the pseudo‐first‐/second‐order rate equation was more appropriate for characterizing the kinetic data, suggesting that the adsorption process might be concerned with a physical reaction.CONCLUSION: The fundamental reason for the large adsorption capacity and fast adsorption rate of St‐DVB‐NB‐AC2O is its strong physical structure and chemical surface properties, which provided improved guidance for the harmless and resource‐based treatment of phenolic wastewaters. © 2018 Society of Chemical Industry
- 10 September 2018
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 94 (1) , 276-287
A newly synthesized N,O group modified hypercrosslinked resin with effective uptake towards polyphenols from aqueous media: behavior and mechanism
BACKGROUND: A series of hypercrosslinked resins were synthesized by controlling the reaction conditions of the Friedel–Crafts reaction of chloromethylated polystyrene‐co‐divinylbenzene (St‐DVB‐Cl), which realized reasonable adjustment of pore structure, surface area and other physical properties. Based on this, a new N,O modified hypercrosslinked resin (St‐DVB‐NB‐AC2O) was successfully prepared by the innovative nitration system, and the adsorption behavior of St‐DVB‐NB‐AC2O was studied under different conditions. The adsorption mechanism between adsorbent and adsorbate was explained by frontier orbital theory and density functional theory.RESULTS: The adsorption capacity of polyphenols on the optimal hypercrosslinked resin (St‐DVB‐NB‐5) was 16.67% higher than that of the optimal commercial resin NDA150. Compared with St‐DVB‐NB‐5, the adsorption increment of hydroxyphenol on St‐DVB‐NB‐AC2O was 31.42%, which was 1.51–8.36 times higher than commercial materials. The Freundlich model was the most suitable for fitting the equilibrium data. However, the pseudo‐first‐/second‐order rate equation was more appropriate for characterizing the kinetic data, suggesting that the adsorption process might be concerned with a physical reaction.CONCLUSION: The fundamental reason for the large adsorption capacity and fast adsorption rate of St‐DVB‐NB‐AC2O is its strong physical structure and chemical surface properties, which provided improved guidance for the harmless and resource‐based treatment of phenolic wastewaters. © 2018 Society of Chemical Industry
- Open Access
- 30 April 2018
- Published by Springer Nature in Microbial Cell Factories
- Vol. 17 (1) , 1-14
Enhancement of the catalytic activity of Isopentenyl diphosphate isomerase (IDI) from Saccharomyces cerevisiae through random and site-directed mutagenesis
Lycopene is a terpenoid pigment that has diverse applications in the food and medicine industries. A prospective approach for lycopene production is by metabolic engineering in microbial hosts, such as Escherichia coli. Isopentenyl diphosphate isomerase (IDI, E.C. 5.3.3.2) is one of the rate-limiting enzymes in the lycopene biosynthetic pathway and one major target during metabolic engineering. The properties of IDIs differ depending on the sources, but under physiological conditions, IDIs are limited by low enzyme activity, short half-life and weak substrate affinity. Therefore, it is important to prepare an excellent IDI by protein engineering. Directed evolution strategy (error-prone PCR) was utilized to optimize the activity of Saccharomyces cerevisiae IDI. Using three rounds of error-prone PCR; screening the development of a lycopene-dependent color reaction; and combinatorial site-specific saturation mutagenesis, three activity-enhancing mutations were identified: L141H, Y195F, and W256C. L141H, located near the active pocket inside the tertiary structure of IDI, formed a hydrogen bond with nearby β-phosphates of isopentenylpyrophosphate (IPP). Phe-195 and Cys-256 were nonpolar amino acids and located near the hydrophobic group of IPP, enlarging the hydrophobic scope, and the active pocket indirectly. Purified IDI was characterized and the result showed that the Km of mutant IDI decreased by 10% compared with Km of the parent IDI, and Kcat was 28% fold improved compared to that of the original IDI. Results of a fermentation experiment revealed that mutant IDI had a 1.8-fold increased lycopene production and a 2.1-fold increased yield capacity compared to wild-type IDI. We prepared an engineered variant of IDI with improved catalytic activity by combining random and site directed mutagenesis. The best mutants produced by this approach enhanced catalytic activity while also displaying improved stability in pH, enhanced thermostability and longer half-life. Importantly, the mutant IDI could play an important role in fed-batch fermentation, being an effective and attractive biocatalyst for the production of biochemicals.
- 30 April 2018
- Published by Springer Nature in Microbial Cell Factories
- Vol. 17 (1) , 1-14
Open AccessEnhancement of the catalytic activity of Isopentenyl diphosphate isomerase (IDI) from Saccharomyces cerevisiae through random and site-directed mutagenesis
Lycopene is a terpenoid pigment that has diverse applications in the food and medicine industries. A prospective approach for lycopene production is by metabolic engineering in microbial hosts, such as Escherichia coli. Isopentenyl diphosphate isomerase (IDI, E.C. 5.3.3.2) is one of the rate-limiting enzymes in the lycopene biosynthetic pathway and one major target during metabolic engineering. The properties of IDIs differ depending on the sources, but under physiological conditions, IDIs are limited by low enzyme activity, short half-life and weak substrate affinity. Therefore, it is important to prepare an excellent IDI by protein engineering. Directed evolution strategy (error-prone PCR) was utilized to optimize the activity of Saccharomyces cerevisiae IDI. Using three rounds of error-prone PCR; screening the development of a lycopene-dependent color reaction; and combinatorial site-specific saturation mutagenesis, three activity-enhancing mutations were identified: L141H, Y195F, and W256C. L141H, located near the active pocket inside the tertiary structure of IDI, formed a hydrogen bond with nearby β-phosphates of isopentenylpyrophosphate (IPP). Phe-195 and Cys-256 were nonpolar amino acids and located near the hydrophobic group of IPP, enlarging the hydrophobic scope, and the active pocket indirectly. Purified IDI was characterized and the result showed that the Km of mutant IDI decreased by 10% compared with Km of the parent IDI, and Kcat was 28% fold improved compared to that of the original IDI. Results of a fermentation experiment revealed that mutant IDI had a 1.8-fold increased lycopene production and a 2.1-fold increased yield capacity compared to wild-type IDI. We prepared an engineered variant of IDI with improved catalytic activity by combining random and site directed mutagenesis. The best mutants produced by this approach enhanced catalytic activity while also displaying improved stability in pH, enhanced thermostability and longer half-life. Importantly, the mutant IDI could play an important role in fed-batch fermentation, being an effective and attractive biocatalyst for the production of biochemicals.
- 20 December 2017
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 102 (4) , 1535-1544
Biosynthesis and production of sabinene: current state and perspectives
Sabinene is an important naturally occurring bicyclic monoterpene which can be used as flavorings, perfume additives, fine chemicals, and advanced biofuels. Up to now, this valuable terpene is commercially unavailable since there is no applicable manufacturing process. Microbial synthesis can be a promising route for sabinene production. In this review, we summarize knowledge about the metabolic pathway and key enzymes for sabinene biosynthesis. Recent advances that have been made in production of sabinene by microbial fermentation are highlighted. In these studies, researchers have identified the general synthetic pathway of sabinene from simple intermediate metabolites. Sabinene synthases of different origins were also cloned and characterized. Additionally, heterologous systems of the model microbes Escherichia coli and Saccharomyces cerevisiae were constructed to produce sabinene. This review also suggests new directions and attempts to gain some insights for achieving an industrial level production of sabinene. The combination of traditional molecular biology with new genome and proteome analysis tools will provide a better view of sabinene biosynthesis and a greater potential of microbial production.
- 20 December 2017
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 102 (4) , 1535-1544
Biosynthesis and production of sabinene: current state and perspectives
Sabinene is an important naturally occurring bicyclic monoterpene which can be used as flavorings, perfume additives, fine chemicals, and advanced biofuels. Up to now, this valuable terpene is commercially unavailable since there is no applicable manufacturing process. Microbial synthesis can be a promising route for sabinene production. In this review, we summarize knowledge about the metabolic pathway and key enzymes for sabinene biosynthesis. Recent advances that have been made in production of sabinene by microbial fermentation are highlighted. In these studies, researchers have identified the general synthetic pathway of sabinene from simple intermediate metabolites. Sabinene synthases of different origins were also cloned and characterized. Additionally, heterologous systems of the model microbes Escherichia coli and Saccharomyces cerevisiae were constructed to produce sabinene. This review also suggests new directions and attempts to gain some insights for achieving an industrial level production of sabinene. The combination of traditional molecular biology with new genome and proteome analysis tools will provide a better view of sabinene biosynthesis and a greater potential of microbial production.
- Open Access
- 19 December 2017
- Published by Springer Nature in Microbial Cell Factories
- Vol. 16 (1) , 1-10
Improving phloroglucinol tolerance and production in Escherichia coli by GroESL overexpression
Phloroglucinol is an important chemical which has been successfully produced by engineered Escherichia coli. However, the toxicity of phloroglucinol can enormously inhibit E. coli cell growth and viability, and the productivity is still too low and not economically feasible for industrial applications. Therefore, strain tolerance to toxic metabolites remains a key issue during the production of chemicals using biological processes. In the present work, we examined the impact of the native GroESL chaperone system with different overexpression levels on phloroglucinol tolerance and production in E. coli. The groESL gene was cloned into an expression vector, of which expression level was regulated by three different promoters (natural, tac and T7 promoter). Strain tolerance was evaluated employing viable cell counts and phloroglucinol production. In comparison with the control strain, all GroESL overexpressing strains showed good characteristics in cell viability and phloroglucinol synthesis. Strain which overexpressed GroESL under tac promoter was found to show the best tolerance in all of those tested, resulting in a 3.19-fold increase in viable cell numbers compared with control strain of agar-plate culture under the condition of 0.7 g/L phloroglucinol, and a 39.5% increase in phloroglucinol production under fed-batch fermentation. This engineered strain finally accumulated phloroglucinol up to 5.3 g/L in the fed-batch cultivation 10 h after induction, and the productivity was 0.53 g/L/h. To date, the highest phloroglucinol production was achieved in this work compared with the previous reports, which is promising to make the bioprocess feasible from the economical point. The data show that appropriate expression level of GroESL plays a critical role in improving phloroglucinol tolerance and production in E. coli, and maybe involve in controlling some aspects of the stress response system through upregulation of GroESL. GroESL overexpression is therefore a feasible and efficient approach for improvement of E. coli tolerance.
- 19 December 2017
- Published by Springer Nature in Microbial Cell Factories
- Vol. 16 (1) , 1-10
Open AccessImproving phloroglucinol tolerance and production in Escherichia coli by GroESL overexpression
Phloroglucinol is an important chemical which has been successfully produced by engineered Escherichia coli. However, the toxicity of phloroglucinol can enormously inhibit E. coli cell growth and viability, and the productivity is still too low and not economically feasible for industrial applications. Therefore, strain tolerance to toxic metabolites remains a key issue during the production of chemicals using biological processes. In the present work, we examined the impact of the native GroESL chaperone system with different overexpression levels on phloroglucinol tolerance and production in E. coli. The groESL gene was cloned into an expression vector, of which expression level was regulated by three different promoters (natural, tac and T7 promoter). Strain tolerance was evaluated employing viable cell counts and phloroglucinol production. In comparison with the control strain, all GroESL overexpressing strains showed good characteristics in cell viability and phloroglucinol synthesis. Strain which overexpressed GroESL under tac promoter was found to show the best tolerance in all of those tested, resulting in a 3.19-fold increase in viable cell numbers compared with control strain of agar-plate culture under the condition of 0.7 g/L phloroglucinol, and a 39.5% increase in phloroglucinol production under fed-batch fermentation. This engineered strain finally accumulated phloroglucinol up to 5.3 g/L in the fed-batch cultivation 10 h after induction, and the productivity was 0.53 g/L/h. To date, the highest phloroglucinol production was achieved in this work compared with the previous reports, which is promising to make the bioprocess feasible from the economical point. The data show that appropriate expression level of GroESL plays a critical role in improving phloroglucinol tolerance and production in E. coli, and maybe involve in controlling some aspects of the stress response system through upregulation of GroESL. GroESL overexpression is therefore a feasible and efficient approach for improvement of E. coli tolerance.