Hasan Taherkhani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hasan Taherkhani has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Farid Noorian
University of Zanjan
3 shared publicationsSiamak Afroozi
Graduate Student, Highway and Transportation Engineering, Univ. of Zanjan, 45371-38791 Zanjan, Iran
3 shared publicationsHosein Zartaj
2 shared publicationsMaryam Pakpour
Pasargad Institute for Advanced Innovative Solutions (PIAIS), Tehran, Iran
2 shared publicationsMilad Tajdini
2 shared publicationsAbdolreza Rezaee Arjroodi
1 shared publication
Latest Publications
- 18 July 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 48 (6) , 4539-4553
Investigating the Effects of Asphalt Aging on the Performance of Asphalt Mixtures Containing Steel Slag Aggregates (SSA)
- 18 July 2024
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 48 (6) , 4539-4553
Investigating the Effects of Asphalt Aging on the Performance of Asphalt Mixtures Containing Steel Slag Aggregates (SSA)
- 20 July 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (6) , 4103-4116
The Effects of Nano-silica Addition on the Physical Properties of Polyethylene-Modified Asphalt Binder and the Mechanical Properties and Durability of Asphalt Mixtures
- 20 July 2023
- Published by Springer Nature in Iranian Journal of Science and Technology, Transactions of Civil Engineering
- Vol. 47 (6) , 4103-4116
The Effects of Nano-silica Addition on the Physical Properties of Polyethylene-Modified Asphalt Binder and the Mechanical Properties and Durability of Asphalt Mixtures
- 3 July 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (7) , 1728-1747
Investigating the use of zinc production wastes as filler in asphalt mixtures
This study aimed to evaluate different types of zinc production wastes for using as filler in asphalt mixtures. Four different types of waste, namely, leach cake, nickel cake, cobalt cake and zinc ash have been chosen along with limestone powder as the control filler for evaluation. Elemental analysis of the fillers, the rheological properties of the mastics and some mechanical properties of the mixtures using Marshall and indirect tensile strength (ITS) tests and their environmental effects using Toxicity Characteristic Leaching Procedure (TCLP) and Synthetic Precipitation Leaching Procedure (SPLP) tests have been investigated. Results show that, except the nickel cake, for which the cadmium concentration exceeds the legal limit, rest of the fillers can be used as filler in asphalt concrete. The zinc ash filler results in much better performance than the other fillers. Leach and cobalt cake are found to be hydrophilic with low resistance against moisture damage.
- 3 July 2022
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 24 (7) , 1728-1747
Investigating the use of zinc production wastes as filler in asphalt mixtures
This study aimed to evaluate different types of zinc production wastes for using as filler in asphalt mixtures. Four different types of waste, namely, leach cake, nickel cake, cobalt cake and zinc ash have been chosen along with limestone powder as the control filler for evaluation. Elemental analysis of the fillers, the rheological properties of the mastics and some mechanical properties of the mixtures using Marshall and indirect tensile strength (ITS) tests and their environmental effects using Toxicity Characteristic Leaching Procedure (TCLP) and Synthetic Precipitation Leaching Procedure (SPLP) tests have been investigated. Results show that, except the nickel cake, for which the cadmium concentration exceeds the legal limit, rest of the fillers can be used as filler in asphalt concrete. The zinc ash filler results in much better performance than the other fillers. Leach and cobalt cake are found to be hydrophilic with low resistance against moisture damage.
- 26 September 2021
- Published by Springer Nature
- p. 1151-1157
Investigating the Creep and Fatigue Properties of Recycled Asphalt Concrete Containing Waste Engine and Waste Cooking Oil
- 26 September 2021
- Published by Springer Nature
- p. 1151-1157
Investigating the Creep and Fatigue Properties of Recycled Asphalt Concrete Containing Waste Engine and Waste Cooking Oil
- Open Access
- 1 October 2020
- Vol. 8 (2) , 115-132
Evaluation of the indirect tensile strength of asphalt concrete containing reclaimed asphalt pavement and waste oils using response surface method
- 1 October 2020
- Vol. 8 (2) , 115-132
Open AccessEvaluation of the indirect tensile strength of asphalt concrete containing reclaimed asphalt pavement and waste oils using response surface method
- 19 June 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (5) , 539-549
Laboratory investigation on the properties of asphalt concrete containing reclaimed asphalt pavement and waste cooking oil as recycling agent
In this study different dosages of waste cooking oil (WCO), namely, 5%, 10% and 15% (by the weight of total asphalt) have been added into an asphalt concrete containing 25%, 50% and 75% of reclaimed asphalt pavement (RAP) and the effects on volumetric and Marshall properties, indirect tensile (IDT) strength, creep and fatigue behaviour have been investigated. Results show that air voids and optimum asphalt content of the mixtures decrease with the increase of WCO and RAP content, respectively. The Marshall stability, flow and IDT grow with the increase of RAP content and drop with increasing WCO dosage. The rutting resistance was found to increase with adding RAP, with lower increase for adding 50% RAP than 25% and 75%, and decrease with adding WCO, with lower decrease for adding 10% than adding 5% and 15%. Stress-controlled fatigue tests showed that the fatigue resistance of non-rejuvenated mixtures grows with increasing RAP content, and, in general, the increase of WCO dosage results in the decrease of fatigue life. According to the results of this research, inclusion of, approximately, 4%, 7% and 10% of WCO into the mixtures containing 25%, 50% and 75% of RAP, respectively, results in a mixture with almost similar properties of the control mixture.
- 19 June 2019
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (5) , 539-549
Laboratory investigation on the properties of asphalt concrete containing reclaimed asphalt pavement and waste cooking oil as recycling agent
In this study different dosages of waste cooking oil (WCO), namely, 5%, 10% and 15% (by the weight of total asphalt) have been added into an asphalt concrete containing 25%, 50% and 75% of reclaimed asphalt pavement (RAP) and the effects on volumetric and Marshall properties, indirect tensile (IDT) strength, creep and fatigue behaviour have been investigated. Results show that air voids and optimum asphalt content of the mixtures decrease with the increase of WCO and RAP content, respectively. The Marshall stability, flow and IDT grow with the increase of RAP content and drop with increasing WCO dosage. The rutting resistance was found to increase with adding RAP, with lower increase for adding 50% RAP than 25% and 75%, and decrease with adding WCO, with lower decrease for adding 10% than adding 5% and 15%. Stress-controlled fatigue tests showed that the fatigue resistance of non-rejuvenated mixtures grows with increasing RAP content, and, in general, the increase of WCO dosage results in the decrease of fatigue life. According to the results of this research, inclusion of, approximately, 4%, 7% and 10% of WCO into the mixtures containing 25%, 50% and 75% of RAP, respectively, results in a mixture with almost similar properties of the control mixture.
- 19 November 2018
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 21 (5) , 1238-1257
Comparing the effects of waste engine and cooking oil on the properties of asphalt concrete containing reclaimed asphalt pavement (RAP)
The effects of using waste engine oil (WEO) and waste cooking oil (WCO) as rejuvenators on some engineering properties of asphalt concrete containing reclaimed asphalt pavement (RAP) have been studied. 10% (by the weight of total binder) of the rejuvenators has been added to asphalt concrete containing 25%, 50% and 75% (by the weight of aggregate) of RAP, and the Marshall properties, indirect tensile strength (ITS), permanent deformation and fatigue properties of the mixtures have been evaluated. The effect of rejuvenators on Marshall properties depends on RAP content and type of rejuvenator, with higher values for the mixtures containing WEO. The ITS of the mixtures increase with increasing RAP content, and decreases with increasing rejuvenators content. Addition of WEO results in lower accumulated strain in the mixtures than adding WCO. In addition, the accumulated strain in the mixtures containing 50% of RAP is higher than that in the mixtures containing 25% and 75% of RAP. The fatigue life of the mixtures was found to increase with increasing RAP content and decrease by addition of rejuvenator with a higher reduction for the WCO. In general, it is concluded that using the rejuvenators enables using higher RAP content in recycled asphaltic mixtures.
- 19 November 2018
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 21 (5) , 1238-1257
Comparing the effects of waste engine and cooking oil on the properties of asphalt concrete containing reclaimed asphalt pavement (RAP)
The effects of using waste engine oil (WEO) and waste cooking oil (WCO) as rejuvenators on some engineering properties of asphalt concrete containing reclaimed asphalt pavement (RAP) have been studied. 10% (by the weight of total binder) of the rejuvenators has been added to asphalt concrete containing 25%, 50% and 75% (by the weight of aggregate) of RAP, and the Marshall properties, indirect tensile strength (ITS), permanent deformation and fatigue properties of the mixtures have been evaluated. The effect of rejuvenators on Marshall properties depends on RAP content and type of rejuvenator, with higher values for the mixtures containing WEO. The ITS of the mixtures increase with increasing RAP content, and decreases with increasing rejuvenators content. Addition of WEO results in lower accumulated strain in the mixtures than adding WCO. In addition, the accumulated strain in the mixtures containing 50% of RAP is higher than that in the mixtures containing 25% and 75% of RAP. The fatigue life of the mixtures was found to increase with increasing RAP content and decrease by addition of rejuvenator with a higher reduction for the WCO. In general, it is concluded that using the rejuvenators enables using higher RAP content in recycled asphaltic mixtures.