Yves Hernandez
Yves Hernandez has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Lasse Leick
NKT Photonics A/S, Blokken 84, BirkerØd DK-3460, Denmark
3 shared publicationsAnthony Bertrand
Multitel asbl, 2 Rue Pierre et Marie Curie, Parc Initialis, 7000 Mons, Belgium
2 shared publicationsNorbert Lichtenstein
Oclaro, Inc. (Switzerland)
2 shared publications- Stefano Selleri
Department of Engineering and Architecture, University of Parma, Parco Area delle Scienze, 43124, Parma, IT, Italy
2 shared publications Alessio Bosio
Solar System & Equipment (Italy)
1 shared publication- Andreas Wienke
Laser Zentrum Hannover e.V., Laser Development Department, Ultrafast Photonics Group, Hollerithallee 8, 30419 Hannover, Germany
1 shared publication
Latest Publications
- 1 January 2015
- Published by Optica Publishing Group
- p. ATh2A.27
High energy sub-nanosecond thulium-doped all-fibre laser based on a rod-type photonic-crystal fibre amplifier
We report a thulium-doped fibre amplified mode-lock laser at 1950 nm using a large mode area rod-type PCF for reaching up to 120 µJ energy at 50 kHz repetition rate and 520 ps pulses duration.
- 1 January 2015
- Published by Optica Publishing Group
- p. ATh2A.27
High energy sub-nanosecond thulium-doped all-fibre laser based on a rod-type photonic-crystal fibre amplifier
We report a thulium-doped fibre amplified mode-lock laser at 1950 nm using a large mode area rod-type PCF for reaching up to 120 µJ energy at 50 kHz repetition rate and 520 ps pulses duration.
- 1 January 2013
- Published by Optica Publishing Group
- p. F4.2
Specialty Fibres and Components for Advanced Microscopy
We investigate fibre basic functions like second harmonic generation for advanced microscopy applications. We present the progress on periodically poled fibres. We achieved 5.2% conversion efficiency into green light with only 50W peak pump power.
- 1 January 2013
- Published by Optica Publishing Group
- p. F4.2
Specialty Fibres and Components for Advanced Microscopy
We investigate fibre basic functions like second harmonic generation for advanced microscopy applications. We present the progress on periodically poled fibres. We achieved 5.2% conversion efficiency into green light with only 50W peak pump power.
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7921, 79210S
Recent status and prospects of the EU-funded ALPINE project
The ALPINE project is developing innovative fiber lasers for the scribing of new thin film photovoltaic modules with the aims to push forward the European research and development of fiber laser systems and solar energy exploitation. The fiber lasers will be based on photonic crystal fibers, which are characterized by unusual and interesting light guiding properties exploited to deliver high power with excellent beam quality and high resonator stability and efficiency, and will be applied to substitute mechanical scribing steps in the photovoltaic module production. In addition, new photovoltaic thin film technologies is applied, which is based on cadmium telluride and copper indium diselenide materials. With a potential conversion efficiency just below that of crystalline silicon, these new material approaches are ready to enter the market with low manufacturing costs for immediate economic or environment impact.
- 10 February 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 7921, 79210S
Recent status and prospects of the EU-funded ALPINE project
The ALPINE project is developing innovative fiber lasers for the scribing of new thin film photovoltaic modules with the aims to push forward the European research and development of fiber laser systems and solar energy exploitation. The fiber lasers will be based on photonic crystal fibers, which are characterized by unusual and interesting light guiding properties exploited to deliver high power with excellent beam quality and high resonator stability and efficiency, and will be applied to substitute mechanical scribing steps in the photovoltaic module production. In addition, new photovoltaic thin film technologies is applied, which is based on cadmium telluride and copper indium diselenide materials. With a potential conversion efficiency just below that of crystalline silicon, these new material approaches are ready to enter the market with low manufacturing costs for immediate economic or environment impact.
- 1 January 2011
- Published by Optica Publishing Group
- p. FThB1
Recent Progress on the ALPINE (Advanced Lasers for Photovoltaic INdustrial processing Enhancement) FP7 Integrated Project
We present the recent advances on the ALPINE project dedicated to developing innovative fibre lasers for scribing thin film CIGS and CdTe solar cells. The project started in September 2009 and involves 15 European partners.
- 1 January 2011
- Published by Optica Publishing Group
- p. FThB1
Recent Progress on the ALPINE (Advanced Lasers for Photovoltaic INdustrial processing Enhancement) FP7 Integrated Project
We present the recent advances on the ALPINE project dedicated to developing innovative fibre lasers for scribing thin film CIGS and CdTe solar cells. The project started in September 2009 and involves 15 European partners.
- 25 April 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6998
Impact of pumping configuration on all-fibered femtosecond chirped pulse amplification
We experimentally compared the co- and counter-propagative pumping scheme for the amplification of ultra-short optical pulses. According to pumping direction we show that optical pulses with a duration of 75 fs and 100mW of average output power can be obtained for co-propagative pumping, while pulse duration is never shorter than 400 fs for the counter-propagative case. We show that the impact of non-linear effects on pulse propagation is different for the two pumping configurations. We assume that Self Phase Modulation (SPM) is the main effect in the copropagative case, whereas the impact of Stimulated Raman Scattering is bigger for the counter-propagative case.
- 25 April 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6998
Impact of pumping configuration on all-fibered femtosecond chirped pulse amplification
We experimentally compared the co- and counter-propagative pumping scheme for the amplification of ultra-short optical pulses. According to pumping direction we show that optical pulses with a duration of 75 fs and 100mW of average output power can be obtained for co-propagative pumping, while pulse duration is never shorter than 400 fs for the counter-propagative case. We show that the impact of non-linear effects on pulse propagation is different for the two pumping configurations. We assume that Self Phase Modulation (SPM) is the main effect in the copropagative case, whereas the impact of Stimulated Raman Scattering is bigger for the counter-propagative case.