Xin Wang
Research Subjects
Xin Wang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Guangming Chen
Guangdong Provincial Key Laboratory of New Energy Materials Service Safety College of Materials Science and Engineering Shenzhen University Shenzhen China
7 shared publications Guangbao Wu
Key Laboratory of Rubber-Plastics
3 shared publications- Hanfu Wang
National Center for Nanoscience and Technology of China, Beijing 100190, P. R. China
2 shared publications - Jing Hua
Key Laboratory of Rubber‐Plastics Ministry of Education/Shandong Provincial Key Laboratory of Rubber‐Plastics, College of Polymer Science and Engineering Qingdao University of Science and Technology Qingdao China
2 shared publications Yufeng Xue
College of Materials Science and Engineering
2 shared publications- Cai-Yan Gao
Key Laboratory of Green Printing, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
1 shared publication
Latest Publications
- Open Access
Buildup of Multi-Ionic Supramolecular Network Facilitated by In-Situ Intercalated Organic Montmorillonite in 1,2-Polybutadiene
The development of a sacrificial bond provided unique inspiration for the design of advanced elastomers with excellent mechanical properties, but it is still a huge challenge to construct a homogenous polar sacrificial network in a nonpolar elastomer. In this effort, we proposed a novel strategy to engineer a multi-ionic network into a covalently cross-linked 1,2-polybutadiene (1,2-PB) facilitated by in-situ intercalated organic montmorillonite (OMMT) without phase separation. XRD, SEM, and TEM analysis were carried out to characterize the microstructure of the resulting polymers. Crosslinking density, dielectric performance, and cyclic tensile tests were used to demonstrate the interaction of zinc methacrylate (ZDMA) and OMMT. The dynamic nature of ionic bonds allowed it to rupture and reform to dissipate energy efficiently. Stretching orientation brought parallelism between polymer chains and OMMT layers which was beneficial for the reconstruction of the ionic network, ultimately resulting in high strength and a low stress relaxation rate. Overall, our work presented the design of a uniform and strong sacrificial network in the nano-clay/elastomer nanocomposite with outstanding mechanical performances under both static and dynamic conditions.
Open AccessBuildup of Multi-Ionic Supramolecular Network Facilitated by In-Situ Intercalated Organic Montmorillonite in 1,2-Polybutadiene
The development of a sacrificial bond provided unique inspiration for the design of advanced elastomers with excellent mechanical properties, but it is still a huge challenge to construct a homogenous polar sacrificial network in a nonpolar elastomer. In this effort, we proposed a novel strategy to engineer a multi-ionic network into a covalently cross-linked 1,2-polybutadiene (1,2-PB) facilitated by in-situ intercalated organic montmorillonite (OMMT) without phase separation. XRD, SEM, and TEM analysis were carried out to characterize the microstructure of the resulting polymers. Crosslinking density, dielectric performance, and cyclic tensile tests were used to demonstrate the interaction of zinc methacrylate (ZDMA) and OMMT. The dynamic nature of ionic bonds allowed it to rupture and reform to dissipate energy efficiently. Stretching orientation brought parallelism between polymer chains and OMMT layers which was beneficial for the reconstruction of the ionic network, ultimately resulting in high strength and a low stress relaxation rate. Overall, our work presented the design of a uniform and strong sacrificial network in the nano-clay/elastomer nanocomposite with outstanding mechanical performances under both static and dynamic conditions.
- 23 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (45) , 22381-22390
Nanostructure controlled construction of high-performance thermoelectric materials of polymers and their composites
Being emerging green energy materials, organic polymer thermoelectric (TE) composites have attracted much current interest and witnessed a rapid development due to their diverse advantages, such as low density, low thermal conductivity, high flexibility, and highly tunable molecular structure. By adjusting the polymer structure and fabrication of their composites, the TE performance can be significantly enhanced. In this review, recent advances in the nanostructures of polymers and their composites for TE applications are introduced. The TE performance of polymers and their composites can be greatly improved and highly tuned by controlled construction of nanostructures via both in situ polymerization and physical mixing. The mechanism of the relation between nanostructures and TE performance is also discussed. Finally, the outlooks of future research are remarked.
- 23 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (45) , 22381-22390
Nanostructure controlled construction of high-performance thermoelectric materials of polymers and their composites
Being emerging green energy materials, organic polymer thermoelectric (TE) composites have attracted much current interest and witnessed a rapid development due to their diverse advantages, such as low density, low thermal conductivity, high flexibility, and highly tunable molecular structure. By adjusting the polymer structure and fabrication of their composites, the TE performance can be significantly enhanced. In this review, recent advances in the nanostructures of polymers and their composites for TE applications are introduced. The TE performance of polymers and their composites can be greatly improved and highly tuned by controlled construction of nanostructures via both in situ polymerization and physical mixing. The mechanism of the relation between nanostructures and TE performance is also discussed. Finally, the outlooks of future research are remarked.
- 13 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (39) , 19030-19037
A convenient and highly tunable way to n-type carbon nanotube thermoelectric composite film using common alkylammonium cationic surfactant
Obtaining n-type candidates with high performance is a great challenge for organic and organic/inorganic composite thermoelectric (TE) materials. Here, we report a convenient and highly tunable way to achieve flexible TE films by doping single-walled carbon nanotubes (SWCNT) with common alkylammonium cationic surfactants. Using a simple solution mixing procedure, pristine p-type SWCNT can be effectively changed to n-type form within a short period. The n-type doping mechanism has been investigated by Raman and XPS spectra. The effects of dopant content, dispersion medium as well as alkyl chain length and anion type of the alkylammonium cationic surfactants on the composite TE performance are systematically investigated. The TE performances of both the n-type TE materials and the corresponding device are among the highest so far. The highest power factor at room temperature reaches 185.7 ± 8.5 μW m−1 K−2. Furthermore, the TE device consisting of five couples of the pristine SWCNT (p-type) and the doped SWCNT (n-type) films generates a high open circuit voltage and a large output power of 37.4 mV and 6.7 μW, respectively, at a temperature gradient of 80 K. The present study opens a convenient and highly tunable avenue to exploit promising n-type TE composites by doping SWCNT with common alkylammonium cationic surfactants.
- 13 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (39) , 19030-19037
A convenient and highly tunable way to n-type carbon nanotube thermoelectric composite film using common alkylammonium cationic surfactant
Obtaining n-type candidates with high performance is a great challenge for organic and organic/inorganic composite thermoelectric (TE) materials. Here, we report a convenient and highly tunable way to achieve flexible TE films by doping single-walled carbon nanotubes (SWCNT) with common alkylammonium cationic surfactants. Using a simple solution mixing procedure, pristine p-type SWCNT can be effectively changed to n-type form within a short period. The n-type doping mechanism has been investigated by Raman and XPS spectra. The effects of dopant content, dispersion medium as well as alkyl chain length and anion type of the alkylammonium cationic surfactants on the composite TE performance are systematically investigated. The TE performances of both the n-type TE materials and the corresponding device are among the highest so far. The highest power factor at room temperature reaches 185.7 ± 8.5 μW m−1 K−2. Furthermore, the TE device consisting of five couples of the pristine SWCNT (p-type) and the doped SWCNT (n-type) films generates a high open circuit voltage and a large output power of 37.4 mV and 6.7 μW, respectively, at a temperature gradient of 80 K. The present study opens a convenient and highly tunable avenue to exploit promising n-type TE composites by doping SWCNT with common alkylammonium cationic surfactants.
- 30 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (8) , 3376-3380
Flexible gel-state thermoelectrochemical materials with excellent mechanical and thermoelectric performances based on incorporating Sn2+/Sn4+ electrolyte into polymer/carbon nanotube composites
Novel gel-state thermoelectrochemical (TEC) materials are designed by incorporating Sn2+/Sn4+ electrolytes into polymer/carbon nanotube composites.
- 30 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (8) , 3376-3380
Flexible gel-state thermoelectrochemical materials with excellent mechanical and thermoelectric performances based on incorporating Sn2+/Sn4+ electrolyte into polymer/carbon nanotube composites
Novel gel-state thermoelectrochemical (TEC) materials are designed by incorporating Sn2+/Sn4+ electrolytes into polymer/carbon nanotube composites.
- 18 May 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 11 (6) , 5746-5752
Exploring High-Performance n-Type Thermoelectric Composites Using Amino-Substituted Rylene Dimides and Carbon Nanotubes
Taking advantage of the high electrical conductivity of a single-walled carbon nanotube (SWCNT) and the large Seebeck coefficient of rylene diimide, a convenient strategy is proposed to achieve high-performance n-type thermoelectric (TE) composites containing a SWCNT and amino-substituted perylene diimide (PDINE) or naphthalene diimide (NDINE). The obtained n-type composites display greatly enhanced TE performance with maximum power factors of 112 ± 8 (PDINE/SWCNT) and 135 ± 14 (NDINE/SWCNT) μW m–1 K–2. A short doping time of 0.5 h can ensure high TE performance. The corresponding TE module consisting of five p–n junctions reaches a large output power of 3.3 μW under a 50 °C temperature gradient. In addition, the n-type composites exhibit high air stability and excellent thermal stability. This design strategy benefits the future fabricating of high-performance n-type TE materials and devices.
- 18 May 2017
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 11 (6) , 5746-5752
Exploring High-Performance n-Type Thermoelectric Composites Using Amino-Substituted Rylene Dimides and Carbon Nanotubes
Taking advantage of the high electrical conductivity of a single-walled carbon nanotube (SWCNT) and the large Seebeck coefficient of rylene diimide, a convenient strategy is proposed to achieve high-performance n-type thermoelectric (TE) composites containing a SWCNT and amino-substituted perylene diimide (PDINE) or naphthalene diimide (NDINE). The obtained n-type composites display greatly enhanced TE performance with maximum power factors of 112 ± 8 (PDINE/SWCNT) and 135 ± 14 (NDINE/SWCNT) μW m–1 K–2. A short doping time of 0.5 h can ensure high TE performance. The corresponding TE module consisting of five p–n junctions reaches a large output power of 3.3 μW under a 50 °C temperature gradient. In addition, the n-type composites exhibit high air stability and excellent thermal stability. This design strategy benefits the future fabricating of high-performance n-type TE materials and devices.
- 13 September 2016
- Published by Wiley in Advances in Polymer Technology
- Vol. 37 (4) , 1016-1021
Grafting of Butadiene–Acrylonitrile Copolymer onto High Vinyl Polybutadiene by Copolymerization
- 13 September 2016
- Published by Wiley in Advances in Polymer Technology
- Vol. 37 (4) , 1016-1021
Grafting of Butadiene–Acrylonitrile Copolymer onto High Vinyl Polybutadiene by Copolymerization
- 19 August 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (37) , 14187-14193
High-performance organic thermoelectric modules based on flexible films of a novel n-type single-walled carbon nanotube
A new strategy to realize p- to n-type conversion of a SWCNT is proposed by diethylenetriamine doping and subsequent CaH 2 reduction. The module with a multilayered stacked structure reveals excellent thermoelectric performance.
- 19 August 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (37) , 14187-14193
High-performance organic thermoelectric modules based on flexible films of a novel n-type single-walled carbon nanotube
A new strategy to realize p- to n-type conversion of a SWCNT is proposed by diethylenetriamine doping and subsequent CaH 2 reduction. The module with a multilayered stacked structure reveals excellent thermoelectric performance.
- 29 September 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (42) , 20896-20902
Tuning thermoelectric performance by nanostructure evolution of a conducting polymer
The thermoelectric performance of PEDOT can be conveniently and effectively tuned by nanostructure evolution.
- 29 September 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (42) , 20896-20902
Tuning thermoelectric performance by nanostructure evolution of a conducting polymer
The thermoelectric performance of PEDOT can be conveniently and effectively tuned by nanostructure evolution.
- 11 June 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (55) , 29281-29285
Morphology and thermoelectric properties of graphene nanosheets enwrapped with polypyrrole
With the help of sodium dodecyl sulfate (SDS), uniform polypyrrole (PPy) coatings were conveniently grown on both sides of reduced graphene oxide (rGO) nanosheet surfaces via a template-directed in situ polymerization. The rGO/PPy composites exhibited greatly enhanced thermoelectric performance with a power factor at room temperature of up to 3.01 μW m−1 K−2, which is 84 times greater than that of the pure PPy.
- 11 June 2014
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (55) , 29281-29285
Morphology and thermoelectric properties of graphene nanosheets enwrapped with polypyrrole
With the help of sodium dodecyl sulfate (SDS), uniform polypyrrole (PPy) coatings were conveniently grown on both sides of reduced graphene oxide (rGO) nanosheet surfaces via a template-directed in situ polymerization. The rGO/PPy composites exhibited greatly enhanced thermoelectric performance with a power factor at room temperature of up to 3.01 μW m−1 K−2, which is 84 times greater than that of the pure PPy.