LSLucyna Samek

Lucyna Samek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lucyna Samek has a total of 103 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sustainable Urban Air Quality Monitoring: Determination of Equivalent Black Carbon Concentrations and Mass Absorption Cross Sections (MAC) Using Multi-Wavelength Absorption Black Carbon Instrument (MABI) in Athens and Krakow

    by Lucyna Samek, Rakshit Jakhar, Anna Ryś, Stefanos Papagiannis, Vassiliki Vassilatou, Stergios Vratolis, Evangelia Diapouli

    Black carbon is an important light-absorbing component of atmospheric particulate matter, with significant implications for urban air quality, climate forcing, human health, and sustainable urban development. Reliable monitoring of black carbon is therefore essential for assessing combustion-related pollution and supporting sustainable air quality management and emission-reduction strategies. This study evaluated the performance of the Multi-Wavelength Absorption Black Carbon Instrument for the offline determination of aerosol light absorption and equivalent black carbon under contrasting urban conditions. PM2.5 and PM10 samples were collected at urban-background sites in Krakow, Poland, and Athens, Greece, during winter and summer 2024, thereby covering heating and non-heating periods and a broad range of aerosol concentrations. Samples were collected in parallel on Quartz-fibre and Teflon filters. Their light absorption was measured offline using the Multi-Wavelength Absorption Black Carbon Instrument at 870 nm. Elemental carbon concentrations were independently determined on Quartz-fibre filters by thermo-optical transmittance using the EUSAAR_2 protocol, while continuous absorption measurements from an AE33 Aethalometer operated in Athens were used to assess the comparability of offline and online measurements. The consistency of two independent Multi-Wavelength Absorption Black Carbon Instruments operated in Krakow and Athens was also examined using a common set of filters. Strong linear relationships were observed between the offline absorption coefficients and elemental carbon concentrations, with coefficients of determination exceeding 0.90 for the investigated datasets. The offline measurements also reproduced the variability observed by the AE33, although they systematically yielded higher absorption coefficients than the continuous instrument. Quartz-fibre filters produced higher absorption values and higher apparent mass absorption cross-sections than Teflon filters, demonstrating a pronounced substrate-dependent effect. The differences in the quartz-based relationships between Krakow and Athens indicated that aerosol composition, source characteristics, ageing, and mixing state may also affect the relationship between optical absorption and elemental carbon concentration. These findings confirm that the instrument is suitable for offline and retrospective assessment of equivalent black carbon, particularly where continuous monitoring is unavailable. Reliable quantitative application requires filter-specific calibration and, where necessary, site-specific mass absorption cross-section values. By enabling the use of archived and routinely collected filter samples for black carbon assessment, this approach can complement continuous monitoring networks and support more accessible and sustainable air quality monitoring. Such measurements can contribute to the evaluation of pollution trends, emission-control measures, and evidence-based strategies aimed at improving urban environmental quality and advancing sustainability goals.

  • Open Access

    Influence of Europe’s Shifting Energy Conditions on the Temporal Variability and Interannual Changes in Equivalent Black Carbon (eBC) in Kraków, Poland

    by Rakshit Jakhar, Lucyna Samek, Katarzyna Styszko

    Equivalent black carbon (eBC) is a key component of fine particulate matter PM2.5, originating from incomplete combustion processes and exerting significant impacts on air quality, human health, and climate. This study investigates the temporal variability and interannual changes in eBC in Kraków, Poland, in the context of Europe’s recent energy policy changes and ongoing energy transition. A one-year dataset (October 2023 to September 2024) based on multi-wavelength optical measurements was analysed to quantify total eBC and its fossil-fuel (eBC) and biomass-burning (eBCbb) components and compared with 2020–2021 observations. Results show strong seasonal variability, with winter eBC concentrations averaging 4.0 µg m−3 and peaking at 5.5 µg m−3 in February, while summer minima reached 1.2–1.5 µg m−3. Biomass-burning contributions remained low throughout the year, ranging from 0.1–0.2 µg m−3 in summer to 0.4–0.5 µg m−3 in winter. PM2.5 concentrations followed similar trends, with winter values of 24–31 µg m−3 and summer levels of 8–12 µg m−3. Extreme pollution episodes were observed during winter, with PM2.5 exceeding 120 µg m−3 and eBC reaching 13 µg m−3. Despite the 2019 ban on coal and wood combustion, elevated wintertime eBC indicates a strong influence of regional emissions transported from surrounding areas. A clear weekly pattern was identified, with eBC concentrations approximately 40% higher on weekdays (3.1 µg m−3) compared to weekends (2.2 µg m−3), while eBCbb showed minimal variation. The winter-to-summer eBC ratio (2.2) highlights the combined effects of heating demand and meteorological conditions. The findings demonstrate that the energy policy changes intensified winter pollution variability and weather events rather than increasing annual averages. The observed differences indicate that pronounced wintertime variability and episodic pollution remained important during 2023–2024 despite lower annual mean concentrations than in 2020–2021. While local policies effectively limit direct emissions within Kraków, regional contributions remain significant, emphasizing the need for coordinated emission reduction strategies and the inclusion of episodic extremes in air quality and health impact assessments.


  • Illuminating the past: X-ray fluorescence and X-ray computed tomography study of medieval stove tiles

    by Romisaa Abdelrahman, Sebastian Wroński, Bartłomiej Makowiecki, Jacek Tarasiuk, Lucyna Samek

    This study investigates five 14th–16th century stove tile fragments from Wawel Royal Castle in Kraków, Poland. X-ray fluorescence (XRF) and X-ray computed tomography (XCT) were used to compare the fragments with known Central European assemblages.

  • Open Access

    The Influence of Ambient Particulate Matter on the Human Respiratory Tract in Major Academic Centers

    by Patryk Grzywa, Filip Mucha, Anna Chlebowska-Styś, Łukasz Pachurka, Vânia Martins, Lucyna Samek, Susana Marta Almeida, Mihalis Lazaridis, Izabela Sówka

    The impact of air pollution on human health remains a critical issue. This study investigates the concentrations of PM2.5 and PM2.5–10 and translates measured exposure concentrations to internal human dose using the Exposure Dose Model 2 (ExDoM2). The cities analyzed (Poznań, Wrocław) were selected based on their demographic and functional significance and the structure of dominant emission sources. These are large academic centers with a significant influx of residents, leading to the seasonal increase in the number of people exposed to air pollution. The total deposited doses of PM2.5 in the human respiratory tract (HRT) for adult males varied seasonally, with the highest dose recorded in winter and autumn equal to 180 µg in Wrocław and Poznań, and the lowest in spring and summer equal to 30 µg and 65 µg in Wrocław and Poznań, respectively. These findings highlight the significant impact of seasonal variability on exposure to particulate matter and its potential health implications. In particular, the deposited doses of particulate matter in Wrocław and Poznań were found to be within a similar range during certain seasons, indicating comparable urban exposure levels. During the heating season, municipal and residential emissions related to the combustion of solid fuels in individual heat sources play a key role, while during the non-heating season, traffic emissions and secondary particulate matter resuspension are more significant. Further research is required to determine the extent to which these similarities reflect shared emission sources or meteorological conditions.


  • Open Access

    Seasonal Variability, Sources and Markers of the Impact of PAH-Bonded PM10 on Health During the COVID-19 Pandemic in Krakow

    by Rakshit Jakhar, Przemysław Furman, Alicja Skiba, Dariusz Wideł, Mirosław Zimnoch, Lucyna Samek, Katarzyna Styszko

    The main objective of this research was to evaluate the seasonal variability of PM10-bound polycyclic aromatic hydrocarbons (PAHs), their sources, and analyse their health impacts We confirmduring the COVID-19 pandemic period. The chemical composition of PM10 in terms of PAH content was carried out using the gas chromatography-mass spectrometry (GC-MS) technique. PM10 samples were collected in Krakow from 2020 to 2021. A total of 92 samples of particulate matter (PM10 fraction) were analysed. The analyses contained 16 basic PAHs identified by the United States Environmental Protection Agency (U.S. EPA) as the most harmful. The information obtained on the concentrations of PAHs was used to determine the profiles of pollution sources, exposure profiles, and the values of toxic equivalency factors recommended by the EPA: mutagenic equivalent to B[a]P (ang. mutagenic equivalent, MEQ), toxic equivalent to B[a]P (ang. toxic equivalent, TEQ), and carcinogenic equivalent to 2,3,7,8-tetrachlorodibenzo-p-dioxin (ang. carcinogenic equivalent, CEQ). In Kraków, heavy PAHs accounted for over 90% of the total PAHs detected in the PM10 samples. In addition, air trajectory frequency analysis was performed to obtain information on the possibility of transporting pollutants from selected areas in the vicinity of the studied site. Interpreting the trajectory results provided information on the nature of air pollution sources. Analysis of Kraków’s air mass trajectory showed that the highest daily concentration of PM10 in the air flow was from the southwest and east for days.

  • Open Access

    Integrating X-ray fluorescence and X-ray computed tomography for comprehensive analysis of historical ceramics from the Kraków Upland

    by Romisaa Abdelrahman, Sebastian Wroński, Michał Wojenka, Jacek Tarasiuk, Lucyna Samek

    This study presents the application of non-destructive analytical techniques, particularly X-ray fluorescence (XRF) and X-ray computed tomography (XCT), to characterize archaeological pottery from medieval and early post-medieval periods. Five pottery samples from three nearby sites located in the Kraków Upland (Kraków district, Poland) were analyzed to explore their material composition, structural properties, and manufacturing techniques. The XRF analysis revealed a detailed elemental composition, and the results obtained matched those of the XRF analysis of source clay deposits in the same microregion. Archaeological pottery contains 3–4 times more silicon than clay deposits, which can be explained by the addition of sandy temper. The level of aluminum in ceramics is similar to that of Al in clay deposits. We also observe a slightly higher contribution of iron in our pottery samples compared to the clay pottery samples. The XCT analysis provided high-resolution, three-dimensional (3-D) images of internal structures, such as inclusions and voids, enabling further investigation into tempering and preparation methods. Segmentation and void analyses demonstrated variations in clay refinement, inclusion distribution, and porosity, indicating a range of manufacturing techniques from rudimentary to advanced practices. The integration of XRF and XCT results underscored the complementary strengths of these techniques despite their respective limitations, such as challenges in mineral differentiation in XCT and voxel resolution constraints. The findings highlight the importance of combining chemical and structural analyses to gain a comprehensive understanding of archaeological ceramics. This study advances the methodological approaches for pottery analysis and offers broader implications for archaeological research and heritage conservation.


  • The Comparison of Performance of Two X‐Ray Fluorescence Spectrometers Applied for the Determination of Elements in Air Particulate Matter Samples Deposited on Filters

    by Patryk Grzywa, Dariusz Węgrzynek, Lucyna Samek

    The sensitivities and limits of detection of elements of two X‐ray fluorescence spectrometers were determined and compared based on measurements of standard samples and samples of air particulate matter deposited on Teflon filters. The first spectrometer was an in‐house constructed secondary target system utilizing a 3 kW Mo anode (line focus) X‐ray tube and a single silicon drift detector, with measurements conducted in air under atmospheric pressure; the second was a commercial spectrometer, M4 Tornado Plus by Bruker, employing a 30 W Rh anode microfocus X‐ray tube, a primary beam polycapillary lens, and two silicon drift detectors, with measurements conducted at a reduced air pressure equal to 2 mbar. For both spectrometers, sensitivities for a number of elements from Z = 11 to Z = 42 (for Kα peaks) and from Z = 44 to Z = 88 (for Lα peaks) were determined and compared. The Kα and Lα peak sensitivities were from 3 to 6 times higher (better), depending on the element, for the M4 Tornado Plus spectrometer as compared to those obtained for the in‐house constructed secondary target system.

  • Open Access

    Oxidative potential of PM1, PM2.5, and PM10 collected in car and tram tunnels to analyse their impact on public health

    by Rakshit Jakhar, Katarzyna Styszko, Lucyna Samek, Katarzyna Szramowiat-Sala

    Airborne particulate matter (PM) is a major environmental health risk, partly due to its oxidative potential (OP), which reflects its ability to generate reactive oxygen species. This study evaluates the OP of PM10, PM2.5, and PM1 fractions collected in car and tram tunnels in Krakow, Poland, using ascorbic acid (AA) and reduced glutathione (GSH) depletion assays. PM samples were collected during 2016 and analysed for organic carbon (OC), elemental carbon (EC), inorganic ions (Na+, K+, Mg2+, Ca2+, NH4+, NO3−, NO2−, Cl−, and SO42−), and metals (Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Sr, Rb, Pb). PM concentrations ranged from 8 to 298 µg/m3 in the car tunnel and 31 to 127 µg/m3 in the tram tunnel. The depletion rates of AA and GSH varied by PM size fraction and tunnel type. Significant positive correlations were observed between OP indicators and redox-active metals, bromine, OC, and polycyclic aromatic hydrocarbons in the tram tunnel. In the car tunnel, stronger associations were found with inorganic ions. The strength of correlations was classified as strong, moderate, or weak to aid interpretation. Our findings highlight differences in the chemical drivers of OP between traffic and tram-related environments, suggesting that PM from combustion processes exerts greater oxidative stress potential than PM influenced by secondary inorganic aerosols. Even short exposure to PM10, PM2.5, and PM1 caused substantial antioxidant depletion, indicating potential respiratory health impacts. This study emphasises the importance of considering PM chemical composition, beyond mass concentration alone, when evaluating its health effects.


  • Open Access

    X- ray absorption spectroscopy analysis of aerosol particles during summer and winter in Krakow, Poland

    by Patryk Grzywa, Alexey Maximenko, Romisaa Abdelrahman, Paweł Wróbel, Filip Baran, Lucyna Samek

    Airborne fine particulate matter (PM2.5) pollution decreased during last decade in Krakow, Poland. X-Ray Absorption Near Edge Structure (XANES) technique at ASTRA beamline of SOLARIS Synchrotron (Krakow, Poland) has been used to study of 8 aerosol samples (PM2.5) collected in Krakow during summer and winter 2018/2019 and 2020/2021 at K absorption edges of sulphur, chlorine, potassium, iron and zinc. Samples of PM2.5 collected in summer contain sulphur mostly as sulphates. On the other hand, samples collected in winter additionally contain bisulphates, sulphides and organic sulphur. KHSO4 and K2SO4 are the primary contributors to potassium pollution in winter. Iron phases of Fe+ 3 and Fe+ 2 oxidation states (FeSO4, Fe2O3 and FeOOH) are present in the samples of PM2.5. Main zinc containing phases present in PM2.5 samples are ZnSO4, ZnS and ZnO. Such advanced unique technique as XANES applied for PM2.5 research can be useful for preparing a program reducing the air pollution level of the city. The study also has a broad aspect, it helps to clarify the kind of chemical compounds present in particulate matter.