Ludek Buchta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ludek Buchta has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Lukas Otava
CEITEC - Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic
4 shared publications Lukas Pohl
CEITEC - Central European Institute of Technology, Brno University of Technology, Purkynova 123, Czech Republic
4 shared publicationsLukas Otava
CEITEC - Central European Institute of Technology, Brno University of Technology, Purkynova 123, 612 00, Czech Republic
2 shared publications- Lukas Otava
CEITEC - Central European Institute of Technology, Technicka 3058/10, Brno, Czech Republic
2 shared publications - Matus Kozovsky
Central European Institute of Technology (CEITEC), Brno University of Technology, Brno, Czech Republic
2 shared publications Miroslav Graf
2 shared publications
Latest Publications
- Open Access
- 23 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1425-1436
Discrete-Time Modeling of Interturn Short Circuits in Interior PMSMs
This article describes the discrete-time modeling approach for interturn short circuits in interior permanent magnet synchronous motors with concentrated windings. The derived model has been designed to embody a tradeoff between precision and complexity, facilitating model-based fault diagnostics and mitigation. A continuous-time model incorporating universal series-parallel stator winding connection and radial permanent magnet fluxes is developed in the stator variables and transformed into the rotor reference frame, including also the electromagnetic torque. The transformed model undergoes discretization using the matrix exponential-based technique, wherein the electrical angular velocity and angle are considered time-varying parameters. The resulting model is subsequently expanded to consider the motor connection resistance via perturbation techniques. In the laboratory experiments, we validate the dynamical properties of the derived model by comparing its outputs with the experimental data and waveforms generated by the forward Euler-based approximation. We thus demonstrate the improvements over the conventional discretization.
- 23 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (1) , 1425-1436
Open AccessDiscrete-Time Modeling of Interturn Short Circuits in Interior PMSMs
This article describes the discrete-time modeling approach for interturn short circuits in interior permanent magnet synchronous motors with concentrated windings. The derived model has been designed to embody a tradeoff between precision and complexity, facilitating model-based fault diagnostics and mitigation. A continuous-time model incorporating universal series-parallel stator winding connection and radial permanent magnet fluxes is developed in the stator variables and transformed into the rotor reference frame, including also the electromagnetic torque. The transformed model undergoes discretization using the matrix exponential-based technique, wherein the electrical angular velocity and angle are considered time-varying parameters. The resulting model is subsequently expanded to consider the motor connection resistance via perturbation techniques. In the laboratory experiments, we validate the dynamical properties of the derived model by comparing its outputs with the experimental data and waveforms generated by the forward Euler-based approximation. We thus demonstrate the improvements over the conventional discretization.
- Open Access
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (10) , 10574-10584
A Dead-Time Compensation Strategy Based on an Online Learned Artificial Neural Network
This article presents an innovative approach to mitigate the harmonic distortion of the phase currents of a permanent magnet synchronous motor (PMSM) controlled by a field-oriented control (FOC) algorithm. The issue of phase current harmonic distortion is often a consequence of the output voltage deformation caused by the nonlinearities of the voltage source inverter (VSI). The relationship between the disturbance voltages of the inverter and the phase currents of the motor is nonlinear. Therefore, we used an artificial neural network (ANN) to identify the compensation voltages. The topology is designed to allow the neural network to solve complex problems with the limited computing resources available on the AURIX TC397 microcontroller. The input vector is assembled from quantities available in the PMSM FOC algorithm. The online learning process based on the backpropagation algorithm is adapted to operate directly on the microcontroller. The proposed strategy with ANN is verified on a real PMSM. The results show the excellent ability of the proposed ANN to suppress the harmonic distortion of the PMSM phase currents without knowledge of the VSI parameters.
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (10) , 10574-10584
Open AccessA Dead-Time Compensation Strategy Based on an Online Learned Artificial Neural Network
This article presents an innovative approach to mitigate the harmonic distortion of the phase currents of a permanent magnet synchronous motor (PMSM) controlled by a field-oriented control (FOC) algorithm. The issue of phase current harmonic distortion is often a consequence of the output voltage deformation caused by the nonlinearities of the voltage source inverter (VSI). The relationship between the disturbance voltages of the inverter and the phase currents of the motor is nonlinear. Therefore, we used an artificial neural network (ANN) to identify the compensation voltages. The topology is designed to allow the neural network to solve complex problems with the limited computing resources available on the AURIX TC397 microcontroller. The input vector is assembled from quantities available in the PMSM FOC algorithm. The online learning process based on the backpropagation algorithm is adapted to operate directly on the microcontroller. The proposed strategy with ANN is verified on a real PMSM. The results show the excellent ability of the proposed ANN to suppress the harmonic distortion of the PMSM phase currents without knowledge of the VSI parameters.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 870-876
Prognosis and Health Management in electric drives applications implemented in existing systems with limited data rate
Importance of the condition monitoring and predictive maintenance in motion systems is growing up as motion systems quantum and their complexity (number of axes, performance parameters) increases with increasing the automation of huge range of human activities and manufacturing processes. Probability of failures increases with the system complexity.Many faults and indication of their propagation in the electric drives would require additional sensors or hardware, higher bandwidth and sampling frequencies of feedback sensors, high computing power etc. for development of sophisticated methods to detect specific faults with good sensitivity, robustness and reliability under any operating condition.This paper presents an approach to the condition monitoring and prognosis applicable into the existing systems. These methods use the information available in the traditional electric drives – especially the information from the individual sensors in a voltage source inverter (VSI) and/or an electric motor. Condition indicators for these methods are based on application specific operating states or actions, which generates typical patterns in the signals. The condition monitoring is based on observing the deviations of these patterns between the healthy system and the system with fault propagating. The implementation strategy is described in the paper and some demonstration examples are shown as well.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 870-876
Prognosis and Health Management in electric drives applications implemented in existing systems with limited data rate
Importance of the condition monitoring and predictive maintenance in motion systems is growing up as motion systems quantum and their complexity (number of axes, performance parameters) increases with increasing the automation of huge range of human activities and manufacturing processes. Probability of failures increases with the system complexity.Many faults and indication of their propagation in the electric drives would require additional sensors or hardware, higher bandwidth and sampling frequencies of feedback sensors, high computing power etc. for development of sophisticated methods to detect specific faults with good sensitivity, robustness and reliability under any operating condition.This paper presents an approach to the condition monitoring and prognosis applicable into the existing systems. These methods use the information available in the traditional electric drives – especially the information from the individual sensors in a voltage source inverter (VSI) and/or an electric motor. Condition indicators for these methods are based on application specific operating states or actions, which generates typical patterns in the signals. The condition monitoring is based on observing the deviations of these patterns between the healthy system and the system with fault propagating. The implementation strategy is described in the paper and some demonstration examples are shown as well.
- 1 January 2019
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 52 (27) , 496-501
Angle tracking observer for the velocity estimation with the filtered control variable
- 1 January 2019
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 52 (27) , 496-501
Angle tracking observer for the velocity estimation with the filtered control variable
- 3 September 2018
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 51 (6) , 18-23
Compensation of Dead-Time Effects Based on Kalman Filter for PMSM Drives
- 3 September 2018
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 51 (6) , 18-23
Compensation of Dead-Time Effects Based on Kalman Filter for PMSM Drives
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. P.1-P.10
Implementation and verification of the PMSM stator interturn short fault detection algorithm
- 1 September 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. P.1-P.10
Implementation and verification of the PMSM stator interturn short fault detection algorithm
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1536-1541
Permanent magnet synchronous motor stator winding fault detection
This paper is focused on stator winding fault detection of a permanent magnet synchronous motor (PMSM). Open phase fault and interturn fault in one phase are considered. Differences between stator resistances are considered as a fault symptom. The estimation of stator resistances is based on Extended Kalman Filter (EKF) with three phase PMSM electrical model. The fault detection method was verified offline on measured experimental data from the PMSM test platform with emulated faults.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1536-1541
Permanent magnet synchronous motor stator winding fault detection
This paper is focused on stator winding fault detection of a permanent magnet synchronous motor (PMSM). Open phase fault and interturn fault in one phase are considered. Differences between stator resistances are considered as a fault symptom. The estimation of stator resistances is based on Extended Kalman Filter (EKF) with three phase PMSM electrical model. The fault detection method was verified offline on measured experimental data from the PMSM test platform with emulated faults.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4301-4306
Adaptive compensation of inverter non-linearities based on the Kalman filter
In this paper, a novel adaptive compensation strategy to reduce dead-time effects and nonlinearity of the VSI is presented. These undesirable properties of the inverter are necessary to compensate because they cause 5th and 7th harmonic distortion of the phase current, torque pulsation and generally reduce the effectiveness of control algorithm. The observer which estimates the dq-currents and the value of the voltage error by only one parameter is designed based on the harmonic analysis and algorithm of the Extended Kalman filter. Subsequently, the compensating voltages are determined from estimated voltage error and the polarity of the estimated currents. The results of simulations and real experiments demonstrate the effectiveness of the proposed approach.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4301-4306
Adaptive compensation of inverter non-linearities based on the Kalman filter
In this paper, a novel adaptive compensation strategy to reduce dead-time effects and nonlinearity of the VSI is presented. These undesirable properties of the inverter are necessary to compensate because they cause 5th and 7th harmonic distortion of the phase current, torque pulsation and generally reduce the effectiveness of control algorithm. The observer which estimates the dq-currents and the value of the voltage error by only one parameter is designed based on the harmonic analysis and algorithm of the Extended Kalman filter. Subsequently, the compensating voltages are determined from estimated voltage error and the polarity of the estimated currents. The results of simulations and real experiments demonstrate the effectiveness of the proposed approach.
- 1 January 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 135-140
Online compensation of inverter non-linearities using a simple voltage disturbance estimator in PMSM drives
This paper presents an effective compensation approach to reduce voltage error which is caused by conversion of the command phase voltages to the output voltages of the inverter. As a result of non-ideal behavior of the switching elements during the switching cycle and overall design of the invertor. The disturbance voltages cause deformation of the phase currents, torque pulsation and overall affect the control algorithm of the PMSM. The disturbance observer is developed to instantaneously estimates the disturbance voltages. It is based on the model of PMSM, known machine parameters and easily measurable variables. The validity of the proposed approach is demonstrated through results of simulations and real experiments.
- 1 January 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 135-140
Online compensation of inverter non-linearities using a simple voltage disturbance estimator in PMSM drives
This paper presents an effective compensation approach to reduce voltage error which is caused by conversion of the command phase voltages to the output voltages of the inverter. As a result of non-ideal behavior of the switching elements during the switching cycle and overall design of the invertor. The disturbance voltages cause deformation of the phase currents, torque pulsation and overall affect the control algorithm of the PMSM. The disturbance observer is developed to instantaneously estimates the disturbance voltages. It is based on the model of PMSM, known machine parameters and easily measurable variables. The validity of the proposed approach is demonstrated through results of simulations and real experiments.