Jianhua Shang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianhua Shang has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
Jiatong Sun
5 shared publications- Yang Liu
School of Information and Intelligent Science, Donghua University, Shanghai, 201620, People’s Republic of China
5 shared publications - Xiaojin Cheng
School of mechanical and automotive engineering, Shanghai University of Engineering Science, Shanghai 201620, China
4 shared publications Jingxin Sang
3 shared publicationsXiaojin Cheng
3 shared publicationsBaoliang Yang
Suqian university
2 shared publications
Latest Publications
- 22 October 2026
- Published by Springer Nature in Journal of Russian Laser Research
- p. 1-14
Deep defect localization and detection in curved CFRP using laser ultrasonic techniques
- 22 October 2026
- Published by Springer Nature in Journal of Russian Laser Research
- p. 1-14
Deep defect localization and detection in curved CFRP using laser ultrasonic techniques
- 22 September 2026
- Published by Elsevier in Measurement
- Vol. 292
Research on defect detection of CFRP based on local defect resonance and laser Doppler vibrometry
- 22 September 2026
- Published by Elsevier in Measurement
- Vol. 292
Research on defect detection of CFRP based on local defect resonance and laser Doppler vibrometry
- 1 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (18) , 34152
HMSPU-Net: hierarchical multi-scale state space model with physics-guided refinement for high-accuracy phase unwrapping in complex scenes
Dense fringes, noise, and surface discontinuities persistently cause large-scale fringe-order errors in deep-learning phase unwrapping, as existing methods lack long-range context and physical constraints. We address this with HMSPU-Net, a hierarchical multi-scale state-space model with physics-guided residual refinement. Efficient 2D Scanning captures global context at linear complexity, while coarse-to-fine state fusion preserves sharp phase-jump boundaries. A wrapped-residual head and an adaptive gated loss embed physical priors. HMSPU-Net achieves an NRMSE of 1.53% and an AU of 97.34% under severe noise, and an AU of 98.45% on the self-constructed real-world dataset, outperforming existing methods and demonstrating robust phase unwrapping in complex scenes.
- 1 September 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (18) , 34152
HMSPU-Net: hierarchical multi-scale state space model with physics-guided refinement for high-accuracy phase unwrapping in complex scenes
Dense fringes, noise, and surface discontinuities persistently cause large-scale fringe-order errors in deep-learning phase unwrapping, as existing methods lack long-range context and physical constraints. We address this with HMSPU-Net, a hierarchical multi-scale state-space model with physics-guided residual refinement. Efficient 2D Scanning captures global context at linear complexity, while coarse-to-fine state fusion preserves sharp phase-jump boundaries. A wrapped-residual head and an adaptive gated loss embed physical priors. HMSPU-Net achieves an NRMSE of 1.53% and an AU of 97.34% under severe noise, and an AU of 98.45% on the self-constructed real-world dataset, outperforming existing methods and demonstrating robust phase unwrapping in complex scenes.
- Open Access
- 1 May 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (9)
Pulsed pumping on piezoelectric PVDF alignment layer suppresses emission consumption of DCM within cholesteric liquid crystal-host
Cholesteric liquid crystals (CLCs) doped with dyes have been shown to enable tunable coherent emission, thus forming the basis for versatile liquid crystal (LC)-lasers. However, their practical adoption is hindered by high pumping thresholds and limited long-term stability. This paper proposes a synergistic strategy to overcome these limitations by engineering the alignment layer and the CLC-host. A novel alignment layer based on polyvinylidene-fluoride (PVDF) incorporating NiO nanoparticles (NPs) has been developed. Electro-optical analysis revealed that an 8 wt% NiO NPs-PVDF alignment layer paired with a ZnO-coated slide facilitated highly efficient dipole redistribution, leading to faster switching and a significantly reduced threshold voltage. The integration of the optimized alignment layer with a 0.1wt% gold nanorods (Au NRs) blending CLC-host has enabled the successful fabrication of an advanced LC-laser. The helical assembly of plasmonic Au NRs has been demonstrated to enhance the localized optical field under pumping conditions, thereby achieving a 197% enhancement in DCM emission efficiency. Furthermore, the helical assemblies have been shown to result in a substantial improvement in thermal-dependent quenching of 9.35%. This synergistic approach, which combines a functionalized alignment layer with a plasmonic CLC-host, represents a significant advancement in the development of practical, low-threshold, and highly stable LC-lasers.
- 1 May 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (9)
Open AccessPulsed pumping on piezoelectric PVDF alignment layer suppresses emission consumption of DCM within cholesteric liquid crystal-host
Cholesteric liquid crystals (CLCs) doped with dyes have been shown to enable tunable coherent emission, thus forming the basis for versatile liquid crystal (LC)-lasers. However, their practical adoption is hindered by high pumping thresholds and limited long-term stability. This paper proposes a synergistic strategy to overcome these limitations by engineering the alignment layer and the CLC-host. A novel alignment layer based on polyvinylidene-fluoride (PVDF) incorporating NiO nanoparticles (NPs) has been developed. Electro-optical analysis revealed that an 8 wt% NiO NPs-PVDF alignment layer paired with a ZnO-coated slide facilitated highly efficient dipole redistribution, leading to faster switching and a significantly reduced threshold voltage. The integration of the optimized alignment layer with a 0.1wt% gold nanorods (Au NRs) blending CLC-host has enabled the successful fabrication of an advanced LC-laser. The helical assembly of plasmonic Au NRs has been demonstrated to enhance the localized optical field under pumping conditions, thereby achieving a 197% enhancement in DCM emission efficiency. Furthermore, the helical assemblies have been shown to result in a substantial improvement in thermal-dependent quenching of 9.35%. This synergistic approach, which combines a functionalized alignment layer with a plasmonic CLC-host, represents a significant advancement in the development of practical, low-threshold, and highly stable LC-lasers.
- 1 February 2026
- Published by Springer Nature in Journal of Russian Laser Research
- Vol. 47 (1) , 10-18
Research on the generation and propagation characteristics of laser-induced underwater acoustic waves based on the thermal expansion mechanism
- 1 February 2026
- Published by Springer Nature in Journal of Russian Laser Research
- Vol. 47 (1) , 10-18
Research on the generation and propagation characteristics of laser-induced underwater acoustic waves based on the thermal expansion mechanism
- 16 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (3) , 036002
An acoustic monitoring method for marine mammals based on the integration of dual-comb multi-heterodyne interferometry and lightweight deep learning models
To overcome the limitations of traditional acoustic methods in sensitivity, classification accuracy, and deploy ability, this study proposes a novel framework that combines dual-comb multi-heterodyne interferometry (DCMHI) with deep learning. The system enables high-speed, high-sensitivity detection of sound pressure variations across frequencies using optical frequency combs (OFCs). A Mel-spectrogram dataset based on real marine mammal vocalizations was constructed, with multiple audio augmentation techniques employed to enhance data diversity and model generalization. Meanwhile, a Lightweight Marine Mammal Classification Network (LMMC-Net) model was designed, which integrates the Spatial-Channel Semantic-Guided Block (SCSGB) and the Linear Manhattan Self-Attention Block (LMASAB) to enable efficient acoustic feature extraction and accurate classification. Experiments show that the system achieves a minimum detectable sound pressure level (MDSPL) of 97.68 dB re 1 μPa for a 6 kHz pulse when the output signal-to-noise ratio (SNR) reaches 15 dB. Data augmentation improves classification accuracy by 2.6%. On the Mammalian Mel-Spectrogram Dataset (MMS-31 dataset), LMMC-Net outperforms YOLOv12 by 1.1% in Top-1 accuracy and 21.63% in inference speed, while reducing parameters by 41.62%, demonstrating strong potential for edge deployment.
- 16 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (3) , 036002
An acoustic monitoring method for marine mammals based on the integration of dual-comb multi-heterodyne interferometry and lightweight deep learning models
To overcome the limitations of traditional acoustic methods in sensitivity, classification accuracy, and deploy ability, this study proposes a novel framework that combines dual-comb multi-heterodyne interferometry (DCMHI) with deep learning. The system enables high-speed, high-sensitivity detection of sound pressure variations across frequencies using optical frequency combs (OFCs). A Mel-spectrogram dataset based on real marine mammal vocalizations was constructed, with multiple audio augmentation techniques employed to enhance data diversity and model generalization. Meanwhile, a Lightweight Marine Mammal Classification Network (LMMC-Net) model was designed, which integrates the Spatial-Channel Semantic-Guided Block (SCSGB) and the Linear Manhattan Self-Attention Block (LMASAB) to enable efficient acoustic feature extraction and accurate classification. Experiments show that the system achieves a minimum detectable sound pressure level (MDSPL) of 97.68 dB re 1 μPa for a 6 kHz pulse when the output signal-to-noise ratio (SNR) reaches 15 dB. Data augmentation improves classification accuracy by 2.6%. On the Mammalian Mel-Spectrogram Dataset (MMS-31 dataset), LMMC-Net outperforms YOLOv12 by 1.1% in Top-1 accuracy and 21.63% in inference speed, while reducing parameters by 41.62%, demonstrating strong potential for edge deployment.
- Open Access
Analysis of Thermal Effects in Yb:YAG Laser Amplifiers with Active-Mirror Structure
To address the challenge of laser beam distortion induced by thermal effects in high-power slab laser amplifiers, a coupled thermal–mechanical–optical model for a face-pumped Yb:YAG multi-pass amplifier was developed. The thermal effects under different thermal management strategies were systematically investigated using the finite element method. Firstly, the temperature distribution, thermal stress, and deformation within the Yb:YAG crystal were analyzed and compared under both room-temperature (293 K) and cryogenic (150 K) cooling conditions using a microchannel cooling structure. The results demonstrate that under a pump power of 100 W and room-temperature cooling, the peak temperature of the gain medium reaches 363 K, with a peak thermal stress of 1.04 MPa and a maximum thermal deformation of 1.44 μm. In contrast, under cryogenic cooling at 150 K, the maximum temperature is reduced to 188 K, and both thermal stress and deformation exhibit a more uniform distribution within the pumped region. Subsequently, the thermal lensing of bonded and non-bonded Yb:YAG crystals was compared and analyzed by ray-tracing. It was found that under a pump power of 100 W, the thermal focal lengths of non-bonded Yb:YAG are 1112 mm and 2559 mm at cooling temperatures of 293 K and 150 K, respectively. For bonded crystals with a 3 mm undoped YAG thickness under identical pumping and cooling conditions, the corresponding thermal focal lengths measure 1508 mm and 3044 mm. When the undoped YAG thickness increases to 6 mm, the thermal focal lengths further extend to 1789 mm and 4206 mm, respectively.
Open AccessAnalysis of Thermal Effects in Yb:YAG Laser Amplifiers with Active-Mirror Structure
To address the challenge of laser beam distortion induced by thermal effects in high-power slab laser amplifiers, a coupled thermal–mechanical–optical model for a face-pumped Yb:YAG multi-pass amplifier was developed. The thermal effects under different thermal management strategies were systematically investigated using the finite element method. Firstly, the temperature distribution, thermal stress, and deformation within the Yb:YAG crystal were analyzed and compared under both room-temperature (293 K) and cryogenic (150 K) cooling conditions using a microchannel cooling structure. The results demonstrate that under a pump power of 100 W and room-temperature cooling, the peak temperature of the gain medium reaches 363 K, with a peak thermal stress of 1.04 MPa and a maximum thermal deformation of 1.44 μm. In contrast, under cryogenic cooling at 150 K, the maximum temperature is reduced to 188 K, and both thermal stress and deformation exhibit a more uniform distribution within the pumped region. Subsequently, the thermal lensing of bonded and non-bonded Yb:YAG crystals was compared and analyzed by ray-tracing. It was found that under a pump power of 100 W, the thermal focal lengths of non-bonded Yb:YAG are 1112 mm and 2559 mm at cooling temperatures of 293 K and 150 K, respectively. For bonded crystals with a 3 mm undoped YAG thickness under identical pumping and cooling conditions, the corresponding thermal focal lengths measure 1508 mm and 3044 mm. When the undoped YAG thickness increases to 6 mm, the thermal focal lengths further extend to 1789 mm and 4206 mm, respectively.
- 24 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (19) , 6105-6108
Tunable and prolonged emission of DCM in an intrinsic chiral CNT blending cholesteric liquid crystal-host
This work investigates a soft host for liquid crystal lasers, formed by blending intrinsic chiral carbon nanotubes (c-CNTs) into cholesteric liquid crystals (CLCs). The emission intensity of the doped luminescent dye (DCM) exhibited pronounced photonic bandgap dependence. Furthermore, blending c-CNTs significantly enhanced the DCM emission intensity and improved its long-term stability, attributed to multi-domain scattering arising from internal refractive index variations. These findings provide insights into the tunability of liquid crystal lasers and highlight the potential of c-CNTs blending CLC-hosts for applications in photonics, imaging, and medicine.
- 24 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (19) , 6105-6108
Tunable and prolonged emission of DCM in an intrinsic chiral CNT blending cholesteric liquid crystal-host
This work investigates a soft host for liquid crystal lasers, formed by blending intrinsic chiral carbon nanotubes (c-CNTs) into cholesteric liquid crystals (CLCs). The emission intensity of the doped luminescent dye (DCM) exhibited pronounced photonic bandgap dependence. Furthermore, blending c-CNTs significantly enhanced the DCM emission intensity and improved its long-term stability, attributed to multi-domain scattering arising from internal refractive index variations. These findings provide insights into the tunability of liquid crystal lasers and highlight the potential of c-CNTs blending CLC-hosts for applications in photonics, imaging, and medicine.
- 9 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (12) , 25718-25727
Flexible and wearable dual-channel liquid crystal polymer film for high-performance security information encryption
Information security has become a crucial concern in our daily lives, with numerous advanced strategies developed for information protection and data security. Liquid crystal (LC) has emerged as one of the most attractive candidates for information encryption due to its highly efficient modulation of phase, wavelength, and polarization. However, multi-channel anti-counterfeiting LC devices are typically confined to rigid glass substrates, and achieving such functionality through simple fabrication processes and low-energy stimuli remains a challenge. Herein, a novel twist nematic liquid crystal polymer (LCP) film for multidimensional and flexible information encryption is proposed. Two distinct patterns are written into top and bottom substrates via photomasks created with an ordinary printer. These two pieces of encoded information can be independently displayed by rotating the sample or analyzer. Through ultraviolet photo-crosslinking, the LCP in the cell is solidified into a film, which can then be detached and transferred onto various substrates. This research demonstrates that dual-channel LCP films have promising prospects in wearable devices, flexible displays, data storage, and information encryption.
- 9 June 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (12) , 25718-25727
Flexible and wearable dual-channel liquid crystal polymer film for high-performance security information encryption
Information security has become a crucial concern in our daily lives, with numerous advanced strategies developed for information protection and data security. Liquid crystal (LC) has emerged as one of the most attractive candidates for information encryption due to its highly efficient modulation of phase, wavelength, and polarization. However, multi-channel anti-counterfeiting LC devices are typically confined to rigid glass substrates, and achieving such functionality through simple fabrication processes and low-energy stimuli remains a challenge. Herein, a novel twist nematic liquid crystal polymer (LCP) film for multidimensional and flexible information encryption is proposed. Two distinct patterns are written into top and bottom substrates via photomasks created with an ordinary printer. These two pieces of encoded information can be independently displayed by rotating the sample or analyzer. Through ultraviolet photo-crosslinking, the LCP in the cell is solidified into a film, which can then be detached and transferred onto various substrates. This research demonstrates that dual-channel LCP films have promising prospects in wearable devices, flexible displays, data storage, and information encryption.
- Open Access
- 1 June 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (6)
Photoconductive NiO/ZnO nanoparticles lightning the random laser emitted from a cholesteric liquid crystal host
The pumping of photoluminescent dye to emit in a cholesteric liquid crystal (CLC)-host is characterized by advanced tunable magnitude and phase, and the incorporation of nanomaterials into CLC-hosts results in the enhancement of emission. Herein, we prepared hetero-structured NiO/ZnO nanoparticles (NPs) in CLC-host and investigated their potential for synergistic dye pumping. The hetero-structured NiO/ZnO NPs blending CLCs exhibited a comparably high photonic bandgap and thermal stability over the temperature range from 30 to 38 °C. It is hypothesized that the hetero-structured NiO/ZnO NPs facilitate the transfer of electrons and holes, which is thought to be enhanced due to their differing bandgaps with the photoluminescent 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) and will result in a synergistic enhancement of DCM emission. In comparison to the incorporation of NiO NPs and ZnO NPs in CLC hosts, the emission of DCM in the 0.05 wt. % hetero-structured NiO/ZnO NPs blending CLCs was characterized by a high slope efficiency of 28.07%, long time-emission over the 1-h observation period, and high thermal emission below 38 °C. It is noteworthy that these findings demonstrate the potential of hetero-structured NiO/ZnO NPs in CLC-hosts to achieve augmented emission intensity at reduced energy pumping, which could facilitate the development of novel LC lasers.
- 1 June 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (6)
Open AccessPhotoconductive NiO/ZnO nanoparticles lightning the random laser emitted from a cholesteric liquid crystal host
The pumping of photoluminescent dye to emit in a cholesteric liquid crystal (CLC)-host is characterized by advanced tunable magnitude and phase, and the incorporation of nanomaterials into CLC-hosts results in the enhancement of emission. Herein, we prepared hetero-structured NiO/ZnO nanoparticles (NPs) in CLC-host and investigated their potential for synergistic dye pumping. The hetero-structured NiO/ZnO NPs blending CLCs exhibited a comparably high photonic bandgap and thermal stability over the temperature range from 30 to 38 °C. It is hypothesized that the hetero-structured NiO/ZnO NPs facilitate the transfer of electrons and holes, which is thought to be enhanced due to their differing bandgaps with the photoluminescent 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) and will result in a synergistic enhancement of DCM emission. In comparison to the incorporation of NiO NPs and ZnO NPs in CLC hosts, the emission of DCM in the 0.05 wt. % hetero-structured NiO/ZnO NPs blending CLCs was characterized by a high slope efficiency of 28.07%, long time-emission over the 1-h observation period, and high thermal emission below 38 °C. It is noteworthy that these findings demonstrate the potential of hetero-structured NiO/ZnO NPs in CLC-hosts to achieve augmented emission intensity at reduced energy pumping, which could facilitate the development of novel LC lasers.