Carolina Cabrera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Carolina Cabrera has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Morón
Universidad Politécnica de Madrid
3 shared publications - Alfonso García-Cerezo
Universidad de Málaga
2 shared publications - Mercedes González Redondo
Universidad Politécnica de Madrid
2 shared publications - Alberto Moron
Department of Materials, Universidad Carlos III de Madrid, 28903 Getafe, Spain
1 shared publication Alfonso Garcia
1 shared publication- Cecilia Molina
Dpto. Tecnologia de la Edificacion (U.P.M.), Madrid, Spain
1 shared publication
Latest Publications
- Open Access
Magnetic Sensors Based on Amorphous Ferromagnetic Materials: A Review
Currently there are many types of sensors that are used in lots of applications. Among these, magnetic sensors are a good alternative for the detection and measurement of different phenomena because they are a “simple” and readily available technology. For the construction of such devices there are many magnetic materials available, although amorphous ferromagnetic materials are the most suitable. The existence in the market of these materials allows the production of different kinds of sensors, without requiring expensive manufacture investments for the magnetic cores. Furthermore, these are not fragile materials that require special care, favouring the construction of solid and reliable devices. Another important feature is that these sensors can be developed without electric contact between the measuring device and the sensor, making them especially fit for use in harsh environments. In this review we will look at the main types of developed magnetic sensors. This work presents the state of the art of magnetic sensors based on amorphous ferromagnetic materials used in modern technology: security devices, weapon detection, magnetic maps, car industry, credit cards, etc.
Open AccessMagnetic Sensors Based on Amorphous Ferromagnetic Materials: A Review
Currently there are many types of sensors that are used in lots of applications. Among these, magnetic sensors are a good alternative for the detection and measurement of different phenomena because they are a “simple” and readily available technology. For the construction of such devices there are many magnetic materials available, although amorphous ferromagnetic materials are the most suitable. The existence in the market of these materials allows the production of different kinds of sensors, without requiring expensive manufacture investments for the magnetic cores. Furthermore, these are not fragile materials that require special care, favouring the construction of solid and reliable devices. Another important feature is that these sensors can be developed without electric contact between the measuring device and the sensor, making them especially fit for use in harsh environments. In this review we will look at the main types of developed magnetic sensors. This work presents the state of the art of magnetic sensors based on amorphous ferromagnetic materials used in modern technology: security devices, weapon detection, magnetic maps, car industry, credit cards, etc.
- Open Access
- 5 November 2015
- Published by MDPI AG
A Methodology for Daylight Optimisation of Buildings
There are studies that use a combination of daylight and automatic electric lighting systems that allow a noticeable energy reduction in no residential buildings. However, in order to be able to determine the energetic performance of a building, it is necessary to know the natural illumination levels of natural lighting of the location were the maximum benefit is found. Recently, several illuminance studies are being done focusing on the construction field due to the trend of saving energy and the design of sustainable buildings. Nevertheless, studies that match outside daylight measurements with building inside illumination measurement or with building scale models measurement are not found. But currently, it is a priority for engineers, architects and researchers to reduce the number of luminaires and electricity consumption through the suitable and efficient use of sunlight. The aim of this work is to obtain an empirical model that allows determining the illuminances in a projected building, based on a scale model and daylight measurements. This way, it is possible to optimize some building parameters as orientation, numbers and sizes of the windows, etc…, to obtain the best conditions for the maximum use of natural light with the consistently energy saving. To do this, the global illuminance on horizontal surfaces within a room and in its scale model for different distances from the façade windows has been measured with photometric sensors previously calibrated and connected to dataloggers. Also, one photometric sensor is placed outside the model to known the global exterior horizontal illuminance. From these measures a ratio between global horizontal illuminance in the real space and in the scale model has been obtained. This ratio depends on the global horizontal exterior illuminance and the facade distance. For each distance to the facade the relation between the global horizontal illuminance on the real space and the scale model depends linearly on the global horizontal exterior illuminance. From this linearly relation, the slope an intercept parameters and its variation to the face distance has been obtained. It has been observed that not only the slope of each fitted line as well as the intercept have a linear dependence with the façade distance. From this data, a general equation that allows obtaining a global horizontal illuminance in a real enclosure from measurements taken inside a scale model and the global horizontal exterior illuminance has been obtained.
- 5 November 2015
- Published by MDPI AG
Open AccessA Methodology for Daylight Optimisation of Buildings
There are studies that use a combination of daylight and automatic electric lighting systems that allow a noticeable energy reduction in no residential buildings. However, in order to be able to determine the energetic performance of a building, it is necessary to know the natural illumination levels of natural lighting of the location were the maximum benefit is found. Recently, several illuminance studies are being done focusing on the construction field due to the trend of saving energy and the design of sustainable buildings. Nevertheless, studies that match outside daylight measurements with building inside illumination measurement or with building scale models measurement are not found. But currently, it is a priority for engineers, architects and researchers to reduce the number of luminaires and electricity consumption through the suitable and efficient use of sunlight. The aim of this work is to obtain an empirical model that allows determining the illuminances in a projected building, based on a scale model and daylight measurements. This way, it is possible to optimize some building parameters as orientation, numbers and sizes of the windows, etc…, to obtain the best conditions for the maximum use of natural light with the consistently energy saving. To do this, the global illuminance on horizontal surfaces within a room and in its scale model for different distances from the façade windows has been measured with photometric sensors previously calibrated and connected to dataloggers. Also, one photometric sensor is placed outside the model to known the global exterior horizontal illuminance. From these measures a ratio between global horizontal illuminance in the real space and in the scale model has been obtained. This ratio depends on the global horizontal exterior illuminance and the facade distance. For each distance to the facade the relation between the global horizontal illuminance on the real space and the scale model depends linearly on the global horizontal exterior illuminance. From this linearly relation, the slope an intercept parameters and its variation to the face distance has been obtained. It has been observed that not only the slope of each fitted line as well as the intercept have a linear dependence with the façade distance. From this data, a general equation that allows obtaining a global horizontal illuminance in a real enclosure from measurements taken inside a scale model and the global horizontal exterior illuminance has been obtained.
- Open Access
- 1 January 2014
- Published by Science and Education Publishing Co., Ltd. in American Journal of Educational Research
- Vol. 2 (6) , 366-371
Learning Process of the Steel Use in Building Engineering Students
The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,…; even thou its also has week points like a low resistance to fire, weak against corrosion and a high initial cost compared with other materials. There are a high variety of ways to classify steel. So, it is very important to the building engineering students to know the classification of steel will be focused on the chemical composition of the steel, as it is the most common way of classifying it. The different types of steel will be grouped in four types: carbon steel, alloy steel, stainless steel and tool steel. In carbon steel the main alloying constituent is carbon, in a range between 0.12% and 2%. It may also content small amounts of other elements like manganese, sulphur, phosphorus and silicon. Variations in the carbon content of carbon steel can modify its mechanical properties, for example, with an increase in the carbon content from 0.01 to 1.5% in the alloy, its strength and hardness increases but still such an increase beyond 1.5% causes appreciable reduction in the ductility and malleability of the steel. Alloy steel is a term used referring to steels with other alloying elements in addition to the carbon. The content of this alloying element is between 1.0% and 50% by weight. The most common alloying elements used in this type of steel are manganese, nickel, chromium, molybdenum, vanadium, silicon, and boron; less common alloyants are aluminium, cobalt, copper, cerium, niobium, titanium, tungsten, tin, zinc, lead, and zirconium. By varying the alloy proportions steel properties such as hardenability, corrosion resistance, strength, formability, weldability or ductility can be manipulated. Stainless steel is the alloy of any type of iron that contains at least 10.50 % of chromium and no more than 1.20 % of carbon. It also may content other alloy elements such as nickel or molybdenum. These steels can be divided into four groups based on their crystalline structure. Tool steels is a variety of carbon and alloy steels, its carbon content ranges between 0.7% and 1.5%, it also contains tungsten, molybdenum, cobalt and vanadium in varying quantities to increase heat resistance and durability. They are ideal for cutting and drilling equipment, this suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness).
- 1 January 2014
- Published by Science and Education Publishing Co., Ltd. in American Journal of Educational Research
- Vol. 2 (6) , 366-371
Open AccessLearning Process of the Steel Use in Building Engineering Students
The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,…; even thou its also has week points like a low resistance to fire, weak against corrosion and a high initial cost compared with other materials. There are a high variety of ways to classify steel. So, it is very important to the building engineering students to know the classification of steel will be focused on the chemical composition of the steel, as it is the most common way of classifying it. The different types of steel will be grouped in four types: carbon steel, alloy steel, stainless steel and tool steel. In carbon steel the main alloying constituent is carbon, in a range between 0.12% and 2%. It may also content small amounts of other elements like manganese, sulphur, phosphorus and silicon. Variations in the carbon content of carbon steel can modify its mechanical properties, for example, with an increase in the carbon content from 0.01 to 1.5% in the alloy, its strength and hardness increases but still such an increase beyond 1.5% causes appreciable reduction in the ductility and malleability of the steel. Alloy steel is a term used referring to steels with other alloying elements in addition to the carbon. The content of this alloying element is between 1.0% and 50% by weight. The most common alloying elements used in this type of steel are manganese, nickel, chromium, molybdenum, vanadium, silicon, and boron; less common alloyants are aluminium, cobalt, copper, cerium, niobium, titanium, tungsten, tin, zinc, lead, and zirconium. By varying the alloy proportions steel properties such as hardenability, corrosion resistance, strength, formability, weldability or ductility can be manipulated. Stainless steel is the alloy of any type of iron that contains at least 10.50 % of chromium and no more than 1.20 % of carbon. It also may content other alloy elements such as nickel or molybdenum. These steels can be divided into four groups based on their crystalline structure. Tool steels is a variety of carbon and alloy steels, its carbon content ranges between 0.7% and 1.5%, it also contains tungsten, molybdenum, cobalt and vanadium in varying quantities to increase heat resistance and durability. They are ideal for cutting and drilling equipment, this suitability comes from their distinctive hardness, resistance to abrasion, their ability to hold a cutting edge, and/or their resistance to deformation at elevated temperatures (red-hardness).