Nina Z. Moore
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nina Z. Moore has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Ahmed Kashkoush
Department of Neurological Surgery, Cleveland Clinic, Cleveland, OH, United States
3 shared publications- Gabor Toth
Cerebrovascular Center, Cleveland Clinic, OH (G.T.).
3 shared publications Majid Rashidi
3 shared publications- Mark A. Davison
Cerebrovascular Center, Cleveland Clinic Foundation, 9500 Euclid Avenue, S80, Cleveland, OH 44195, USA
3 shared publications Mark Bain
Department of Neurological Surgery, Cleveland Clinic, Cleveland, OH, United States; Cerebrovascular Center, Cleveland Clinic, Cleveland, OH, United States
3 shared publications- Muhammad Shazam Hussain
Neurological Institute, Cleveland Clinic
3 shared publications
Latest Publications
- Open Access
The Effects of DMSO Cryopreservation on the Biomechanics and Histology of Human Cerebrovascular Tissue
Introduction: Tissue preservation techniques, chiefly cryopreservation, have been demonstrated to alter vascular histology and tissue biomechanics via rapid osmotic change—resulting in collagen fiber rearrangement and internal elastic laminae (IEL) microfractures; however, this has not yet been evaluated in cerebrovascular tissue. As such, we sought to measure the effectiveness of a canonical cryopreservation strategy on the thickness and continuity of human cerebrovascular tissue. With the recent rise in biomechanical analyses of cerebrovascular tissue for the design of novel treatments and optimization of surgical strategies, the importance of designing models with accurate tissue proxies is paramount. Methods: Fresh, human cerebrovascular tissue was obtained through the Cleveland Clinic institutional cadaver donation program. Donors with prior craniotomy, intracranial malignancy, or history of cerebrovascular disease were excluded. Cadaveric tissue dissections were completed within fourteen days of patient expiration and sectioned into four specimens. The 164 tissue samples obtained from three donors were then randomized into one of the following experimental conditions: 10% formalin (control), distilled water (dH2O), dimethyl sulfoxide (DMSO), or −80 °C DMSO cryopreservation. Specimens were then processed into paraffin-embedded sections and treated with Movat pentachrome staining. Vessel layers were measured by two blinded evaluators and discontinuities in internal elastin lamina were tallied. Results: We found that DMSO cryopreservation failed to consistently provide a protective effect to cerebrovascular specimens. Tissue stored via this method was reported to occasionally swell in specific vessel tunics of select vessel territories compared to formalin controls. We also observed an increase in the number of transverse elastin breaks with DMSO cryopreservation. Conclusions: This data demonstrates that conventional tissue preservation methods may fail to preserve layer thicknesses between some vessels and alter biomechanical properties for future testing. Further, with more frequent elastin fractures in the cryopreservation group, recoilability of preserved vessels may vary from in vivo counterparts. GRAPHICAL
Open AccessThe Effects of DMSO Cryopreservation on the Biomechanics and Histology of Human Cerebrovascular Tissue
Introduction: Tissue preservation techniques, chiefly cryopreservation, have been demonstrated to alter vascular histology and tissue biomechanics via rapid osmotic change—resulting in collagen fiber rearrangement and internal elastic laminae (IEL) microfractures; however, this has not yet been evaluated in cerebrovascular tissue. As such, we sought to measure the effectiveness of a canonical cryopreservation strategy on the thickness and continuity of human cerebrovascular tissue. With the recent rise in biomechanical analyses of cerebrovascular tissue for the design of novel treatments and optimization of surgical strategies, the importance of designing models with accurate tissue proxies is paramount. Methods: Fresh, human cerebrovascular tissue was obtained through the Cleveland Clinic institutional cadaver donation program. Donors with prior craniotomy, intracranial malignancy, or history of cerebrovascular disease were excluded. Cadaveric tissue dissections were completed within fourteen days of patient expiration and sectioned into four specimens. The 164 tissue samples obtained from three donors were then randomized into one of the following experimental conditions: 10% formalin (control), distilled water (dH2O), dimethyl sulfoxide (DMSO), or −80 °C DMSO cryopreservation. Specimens were then processed into paraffin-embedded sections and treated with Movat pentachrome staining. Vessel layers were measured by two blinded evaluators and discontinuities in internal elastin lamina were tallied. Results: We found that DMSO cryopreservation failed to consistently provide a protective effect to cerebrovascular specimens. Tissue stored via this method was reported to occasionally swell in specific vessel tunics of select vessel territories compared to formalin controls. We also observed an increase in the number of transverse elastin breaks with DMSO cryopreservation. Conclusions: This data demonstrates that conventional tissue preservation methods may fail to preserve layer thicknesses between some vessels and alter biomechanical properties for future testing. Further, with more frequent elastin fractures in the cryopreservation group, recoilability of preserved vessels may vary from in vivo counterparts. GRAPHICAL
- Open Access
Fluid-structure Interaction Simulation of the Cerebrovascular Circulation: Immersed Boundary versus Arbitrary Lagrangian Eulerian Mesh Formulations
Purpose: Patient-specific fluid-structure interaction (FSI) simulations allow for the in silico modeling of vascular pathology. Though existing attempts to model the cerebrovasculature confirm the potential of FSI as a future diagnostic tool, standard simulation methods and modeling parameters remain undefined. The purpose of this investigation was to compare immersed boundary (IB) and arbitrary Lagrangian Eulerian (ALE) formulations to discern whether the increased modeling complexity offered by ALE is necessary for the modeling of smaller-caliber vessels, given increased computational load. Methods: Direct comparisons of Fluent and Mechanical behavior were conducted between IB and ALE methods of FSI simulation. Simulations utilized an internal carotid artery geometry conduit with optimized mesh. Boundary constraints were derived from previous investigation of vascular tissue and fit to a Prony series. Both qualitative profile comparisons and quantitative parametric analyses of variance were conducted to assess differences in simulation output. Results: In this study, we report deviations in Fluent and Mechanical output between IB and ALE cases of FSI simulation. More specifically, ALE-method simulations boast higher stress, lower wall shear stress, and lower strain. These differences persist across the vessel geometry and increase with high strain. Additionally, inconsistencies between solving methods are exacerbated in areas of more complex mesh geometry (i.e. vessel bifurcation). Conclusion: Substantial alterations in intraluminal stress, shear stress, and strain suggest that ALE formulation is necessary for modeling blood vessels of the cerebrovasculature. Our findings highlight the importance of accurately modeling the dynamic interactions that occur between the fluid and material domains of simulation.
Open AccessFluid-structure Interaction Simulation of the Cerebrovascular Circulation: Immersed Boundary versus Arbitrary Lagrangian Eulerian Mesh Formulations
Purpose: Patient-specific fluid-structure interaction (FSI) simulations allow for the in silico modeling of vascular pathology. Though existing attempts to model the cerebrovasculature confirm the potential of FSI as a future diagnostic tool, standard simulation methods and modeling parameters remain undefined. The purpose of this investigation was to compare immersed boundary (IB) and arbitrary Lagrangian Eulerian (ALE) formulations to discern whether the increased modeling complexity offered by ALE is necessary for the modeling of smaller-caliber vessels, given increased computational load. Methods: Direct comparisons of Fluent and Mechanical behavior were conducted between IB and ALE methods of FSI simulation. Simulations utilized an internal carotid artery geometry conduit with optimized mesh. Boundary constraints were derived from previous investigation of vascular tissue and fit to a Prony series. Both qualitative profile comparisons and quantitative parametric analyses of variance were conducted to assess differences in simulation output. Results: In this study, we report deviations in Fluent and Mechanical output between IB and ALE cases of FSI simulation. More specifically, ALE-method simulations boast higher stress, lower wall shear stress, and lower strain. These differences persist across the vessel geometry and increase with high strain. Additionally, inconsistencies between solving methods are exacerbated in areas of more complex mesh geometry (i.e. vessel bifurcation). Conclusion: Substantial alterations in intraluminal stress, shear stress, and strain suggest that ALE formulation is necessary for modeling blood vessels of the cerebrovasculature. Our findings highlight the importance of accurately modeling the dynamic interactions that occur between the fluid and material domains of simulation.
- Open Access
- 17 June 2025
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 14 (12) , 4320
Histological Analysis of Intracranial Cerebral Arteries for Elastin Thickness, Wall Thickness, and Vessel Diameters: An Atlas for Computational Modeling and a Proposed Predictive Multivariable Model of Elastin Thickness
Background/Objectives: Fluid dynamic models of the cerebral vasculature are being developed to evaluate intracranial vascular pathology. Fluid–structure interaction modeling provides an opportunity for more accurate simulation of vascular pathology by modelling the vessel wall itself in conjunction with the fluid forces. Accuracy of these models is heavily dependent on the parameters used. Of those studied, elastin has been considered a key component used in aortic and common carotid artery modeling. We studied elastin thickness to determine if there was significant variation between cerebral artery territories to suggest its importance in cerebral blood vessel biomechanical response and provide reference data for modeling intracranial elastin. Elastin thickness was compared to vessel location, thickness, diameter, and laterality within human intracranial arteries. Methods: Tissue was taken from five human cadaveric heads preserved in formaldehyde from each intracranial vessel distribution bilaterally and stained with Van Gieson stain for elastin. A total of 160 normal cerebral vascular artery specimens were obtained from 17 different cerebrovascular regions. Two reviewers measured elastin thickness for each sample at five different locations per sample using Aperio ImageScope (Leica Biosystems, Deer Park, IL, USA). Statistical analysis of the samples was performed using mixed-models repeated measures regression methods. Results: There was a significant difference between anterior circulation (6.01 µm) and posterior circulation (4.4 µm) vessel elastin thickness (p-value < 0.05). Additionally, two predictive models of elastin thickness were presented, utilizing a combination of anterior versus posterior circulation, vessel diameter, and vessel wall thickness, which demonstrated significance for prediction with anterior versus posterior combined with vessel diameter and wall thickness. Conclusions: Elastin thicknesses are significantly different between anterior and posterior circulation vessels, which may explain the differences seen in aneurysm rupture risk for anterior versus posterior circulation aneurysms. Additionally, we propose two potential models for predicting elastin thickness based on vessel location, vessel diameter, and vessel wall thickness, all of which can be obtained using preoperative imaging techniques. These findings suggest that elastin plays an important role in cerebral vascular wall integrity, and this data will further enable fluid–structure interaction modeling parameters to be more precise in an effort to provide predictive modeling for cerebrovascular pathology.
- 17 June 2025
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 14 (12) , 4320
Open AccessHistological Analysis of Intracranial Cerebral Arteries for Elastin Thickness, Wall Thickness, and Vessel Diameters: An Atlas for Computational Modeling and a Proposed Predictive Multivariable Model of Elastin Thickness
Background/Objectives: Fluid dynamic models of the cerebral vasculature are being developed to evaluate intracranial vascular pathology. Fluid–structure interaction modeling provides an opportunity for more accurate simulation of vascular pathology by modelling the vessel wall itself in conjunction with the fluid forces. Accuracy of these models is heavily dependent on the parameters used. Of those studied, elastin has been considered a key component used in aortic and common carotid artery modeling. We studied elastin thickness to determine if there was significant variation between cerebral artery territories to suggest its importance in cerebral blood vessel biomechanical response and provide reference data for modeling intracranial elastin. Elastin thickness was compared to vessel location, thickness, diameter, and laterality within human intracranial arteries. Methods: Tissue was taken from five human cadaveric heads preserved in formaldehyde from each intracranial vessel distribution bilaterally and stained with Van Gieson stain for elastin. A total of 160 normal cerebral vascular artery specimens were obtained from 17 different cerebrovascular regions. Two reviewers measured elastin thickness for each sample at five different locations per sample using Aperio ImageScope (Leica Biosystems, Deer Park, IL, USA). Statistical analysis of the samples was performed using mixed-models repeated measures regression methods. Results: There was a significant difference between anterior circulation (6.01 µm) and posterior circulation (4.4 µm) vessel elastin thickness (p-value < 0.05). Additionally, two predictive models of elastin thickness were presented, utilizing a combination of anterior versus posterior circulation, vessel diameter, and vessel wall thickness, which demonstrated significance for prediction with anterior versus posterior combined with vessel diameter and wall thickness. Conclusions: Elastin thicknesses are significantly different between anterior and posterior circulation vessels, which may explain the differences seen in aneurysm rupture risk for anterior versus posterior circulation aneurysms. Additionally, we propose two potential models for predicting elastin thickness based on vessel location, vessel diameter, and vessel wall thickness, all of which can be obtained using preoperative imaging techniques. These findings suggest that elastin plays an important role in cerebral vascular wall integrity, and this data will further enable fluid–structure interaction modeling parameters to be more precise in an effort to provide predictive modeling for cerebrovascular pathology.
- 9 January 2024
- Published by BMJ in Journal of NeuroInterventional Surgery
- Vol. 17 (e1) , e1-e8
Treatment outcomes for ARUBA-eligible brain arteriovenous malformations: a comparison of real-world data from the NVQI-QOD AVM registry with the ARUBA trial
Background Significant controversy exists about the management of unruptured cerebral arteriovenous malformations (AVMs). Results from A Randomized Trial of Unruptured Brain Arteriovenous Malformations (ARUBA) suggested that intervention increases the risk of stroke/death compared with medical management. However, numerous study limitations raised concerns about the trial’s generalizability. Objective To assess the rate of stroke/death and functional outcomes in ARUBA-eligible patients from a multicenter database, the Neurovascular Quality Initiative-Quality Outcomes Database (NVQI-QOD). Methods We performed a retrospective analysis of prospectively collected data of ARUBA-eligible patients who underwent intervention at 18 participating centers. The primary endpoint was stroke/death from any cause. Secondary endpoints included neurologic, systemic, radiographic, and functional outcomes. Results 173 ARUBA-eligible patients underwent intervention with median follow-up of 269 (25–722.5) days. Seventy-five patients received microsurgery±embolization, 37 received radiosurgery, and 61 received embolization. Baseline demographics, risk factors, and general AVM characteristics were similar between groups. A total of 15 (8.7%) patients experienced stroke/death with no significant difference in primary outcome between treatment modalities. Microsurgery±embolization was more likely to achieve AVM obliteration (PConclusion Our results suggest that intervention for unruptured brain AVMs at comprehensive stroke centers across the United States is safe.
- 9 January 2024
- Published by BMJ in Journal of NeuroInterventional Surgery
- Vol. 17 (e1) , e1-e8
Treatment outcomes for ARUBA-eligible brain arteriovenous malformations: a comparison of real-world data from the NVQI-QOD AVM registry with the ARUBA trial
Background Significant controversy exists about the management of unruptured cerebral arteriovenous malformations (AVMs). Results from A Randomized Trial of Unruptured Brain Arteriovenous Malformations (ARUBA) suggested that intervention increases the risk of stroke/death compared with medical management. However, numerous study limitations raised concerns about the trial’s generalizability. Objective To assess the rate of stroke/death and functional outcomes in ARUBA-eligible patients from a multicenter database, the Neurovascular Quality Initiative-Quality Outcomes Database (NVQI-QOD). Methods We performed a retrospective analysis of prospectively collected data of ARUBA-eligible patients who underwent intervention at 18 participating centers. The primary endpoint was stroke/death from any cause. Secondary endpoints included neurologic, systemic, radiographic, and functional outcomes. Results 173 ARUBA-eligible patients underwent intervention with median follow-up of 269 (25–722.5) days. Seventy-five patients received microsurgery±embolization, 37 received radiosurgery, and 61 received embolization. Baseline demographics, risk factors, and general AVM characteristics were similar between groups. A total of 15 (8.7%) patients experienced stroke/death with no significant difference in primary outcome between treatment modalities. Microsurgery±embolization was more likely to achieve AVM obliteration (PConclusion Our results suggest that intervention for unruptured brain AVMs at comprehensive stroke centers across the United States is safe.
- 5 January 2024
- Published by Elsevier in Journal of Clinical Neuroscience
- Vol. 120, 42-47
The obesity paradox and ventriculoperitoneal shunting in aneurysmal subarachnoid hemorrhage patients undergoing microsurgical clipping
- 5 January 2024
- Published by Elsevier in Journal of Clinical Neuroscience
- Vol. 120, 42-47
The obesity paradox and ventriculoperitoneal shunting in aneurysmal subarachnoid hemorrhage patients undergoing microsurgical clipping
- 4 August 2023
- Published by BMJ in Journal of NeuroInterventional Surgery
- Vol. 16 (9) , 921-927
Flow diversion for the treatment of intracranial bifurcation aneurysms: a systematic review and meta-analysis
Background: Flow diversion (FD: flow diversion, flow diverter) is an endovascular treatment for many intracranial aneurysm types; however, limited reports have explored the use of FDs in bifurcation aneurysm management. We analyzed the safety and efficacy of FD for the management of intracranial bifurcation aneurysms.Methods: A systematic review identified original research articles that used FD for treating intracranial bifurcation aneurysms. Articles with >4 patients that reported outcomes on the use of FDs for the management of bifurcation aneurysms along the anterior communicating artery (AComA), internal carotid artery terminus (ICAt), basilar apex (BA), or middle cerebral artery bifurcation (MCAb) were included. Meta-analysis was performed using a random effects model.Results: 19 studies were included with 522 patients harboring 534 bifurcation aneurysms (mean size 9 mm, 78% unruptured). Complete aneurysmal occlusion rate was 68% (95% CI 58.7% to 76.1%, I2=67%) at mean angiographic follow-up of 16 months. Subgroup analysis of FD as a standalone treatment estimated a complete occlusion rate of 69% (95% CI 50% to 83%, I2=38%). The total complication rate was 22% (95% CI 16.7% to 28.6%, I2=51%), largely due to an ischemic complication rate of 16% (95% CI 10.8% to 21.9%, I2=55%). The etiologies of ischemic complications were largely due to jailed artery hypoperfusion (47%) and in-stent thrombosis (38%). 7% of patients suffered permanent symptomatic complications (95% CI 4.5% to 9.8%, I2=6%).Conclusion: FD treatment of bifurcation aneurysms has a modest efficacy and relatively unfavorable safety profile. Proceduralists may consider reserving FD as a treatment option if no other surgical or endovascular therapy is deemed feasible.
- 4 August 2023
- Published by BMJ in Journal of NeuroInterventional Surgery
- Vol. 16 (9) , 921-927
Flow diversion for the treatment of intracranial bifurcation aneurysms: a systematic review and meta-analysis
Background: Flow diversion (FD: flow diversion, flow diverter) is an endovascular treatment for many intracranial aneurysm types; however, limited reports have explored the use of FDs in bifurcation aneurysm management. We analyzed the safety and efficacy of FD for the management of intracranial bifurcation aneurysms.Methods: A systematic review identified original research articles that used FD for treating intracranial bifurcation aneurysms. Articles with >4 patients that reported outcomes on the use of FDs for the management of bifurcation aneurysms along the anterior communicating artery (AComA), internal carotid artery terminus (ICAt), basilar apex (BA), or middle cerebral artery bifurcation (MCAb) were included. Meta-analysis was performed using a random effects model.Results: 19 studies were included with 522 patients harboring 534 bifurcation aneurysms (mean size 9 mm, 78% unruptured). Complete aneurysmal occlusion rate was 68% (95% CI 58.7% to 76.1%, I2=67%) at mean angiographic follow-up of 16 months. Subgroup analysis of FD as a standalone treatment estimated a complete occlusion rate of 69% (95% CI 50% to 83%, I2=38%). The total complication rate was 22% (95% CI 16.7% to 28.6%, I2=51%), largely due to an ischemic complication rate of 16% (95% CI 10.8% to 21.9%, I2=55%). The etiologies of ischemic complications were largely due to jailed artery hypoperfusion (47%) and in-stent thrombosis (38%). 7% of patients suffered permanent symptomatic complications (95% CI 4.5% to 9.8%, I2=6%).Conclusion: FD treatment of bifurcation aneurysms has a modest efficacy and relatively unfavorable safety profile. Proceduralists may consider reserving FD as a treatment option if no other surgical or endovascular therapy is deemed feasible.
- Open Access
Aneurysmal versus “Benign” Perimesencephalic Subarachnoid Hemorrhage
Introduction: The rate of underlying ruptured aneurysm, complications, and outcomes in “benign” perimesencephalic subarachnoid hemorrhage (PMSAH) are not well known and underreported. Methods: Retrospective analysis of patients with PMSAH from a large tertiary care center (2007-2023). Clinical and imaging data were studied. Results: Eighty-one patients were included with mean age of 55.5 ± 10.3 years. Median (IQR) Hunt and Hess grade was 2 (1-2), and modified Fisher grade was 3 (1-3). An underlying ruptured aneurysm was diagnosed in 5 patients (6.2%). The most common complication was vasospasm in 25 patients (31%) with a significantly higher rate of symptomatic vasospasm among patients with underlying aneurysm (40% vs 2.6%; P=0.01). The median (IQR) time of vasospasm detection was 7 (8-9) days. The majority of vasospasm cases (84%) were asymptomatic, which was not associated with poor outcomes (OR= 0.95, [0.22–4.1], P =0.9) compared to the asymptomatic vasospasm (OR= 8.6, [1.06-69.88], P = 0.04). Hydrocephalus occurred in 10% of patients within one day, at higher rate in the aneurysmal group (40% vs 8%; P=0.07). A total of 88% of patients had a favorable functional outcome (mRS 0-2) at discharge, but at a significantly higher rate in non-aneurysmal patients (91% vs 40%; P=0.01). An underlying aneurysm and hydrocephalus were associated with poor functional status (OR= 14.7, [2.1–104], P =0.007, and OR= 22.6, [4.2–123.5], P <0.001), respectively. Conclusion: “Benign” PMSAH pattern was associated with a ruptured aneurysm in 6.2% of patients, which highlights the critical value of conventional cerebral angiogram in the workup. Expectedly, an underlying aneurysm was associated with higher rates of symptomatic vasospasm, hydrocephalus, and lower rates of good clinical outcome. Aneurysm and hydrocephalus were independently associated with poorer outcomes, however, these were detected very early during hospitalization. Vasospasm alone was not associated with poor outcomes. Our findings suggest that non-aneurysmal PMSAH patients can safely be managed with less strict monitoring and a shorter hospital stay.
Open AccessAneurysmal versus “Benign” Perimesencephalic Subarachnoid Hemorrhage
Introduction: The rate of underlying ruptured aneurysm, complications, and outcomes in “benign” perimesencephalic subarachnoid hemorrhage (PMSAH) are not well known and underreported. Methods: Retrospective analysis of patients with PMSAH from a large tertiary care center (2007-2023). Clinical and imaging data were studied. Results: Eighty-one patients were included with mean age of 55.5 ± 10.3 years. Median (IQR) Hunt and Hess grade was 2 (1-2), and modified Fisher grade was 3 (1-3). An underlying ruptured aneurysm was diagnosed in 5 patients (6.2%). The most common complication was vasospasm in 25 patients (31%) with a significantly higher rate of symptomatic vasospasm among patients with underlying aneurysm (40% vs 2.6%; P=0.01). The median (IQR) time of vasospasm detection was 7 (8-9) days. The majority of vasospasm cases (84%) were asymptomatic, which was not associated with poor outcomes (OR= 0.95, [0.22–4.1], P =0.9) compared to the asymptomatic vasospasm (OR= 8.6, [1.06-69.88], P = 0.04). Hydrocephalus occurred in 10% of patients within one day, at higher rate in the aneurysmal group (40% vs 8%; P=0.07). A total of 88% of patients had a favorable functional outcome (mRS 0-2) at discharge, but at a significantly higher rate in non-aneurysmal patients (91% vs 40%; P=0.01). An underlying aneurysm and hydrocephalus were associated with poor functional status (OR= 14.7, [2.1–104], P =0.007, and OR= 22.6, [4.2–123.5], P <0.001), respectively. Conclusion: “Benign” PMSAH pattern was associated with a ruptured aneurysm in 6.2% of patients, which highlights the critical value of conventional cerebral angiogram in the workup. Expectedly, an underlying aneurysm was associated with higher rates of symptomatic vasospasm, hydrocephalus, and lower rates of good clinical outcome. Aneurysm and hydrocephalus were independently associated with poorer outcomes, however, these were detected very early during hospitalization. Vasospasm alone was not associated with poor outcomes. Our findings suggest that non-aneurysmal PMSAH patients can safely be managed with less strict monitoring and a shorter hospital stay.
- 18 May 2022
- Published by Elsevier in World Neurosurgery
- Vol. 164, 257-269
Endovascular Management of Arteriovenous Malformation–Associated Intracranial Aneurysms: A Systematic Literature Review
- 18 May 2022
- Published by Elsevier in World Neurosurgery
- Vol. 164, 257-269
Endovascular Management of Arteriovenous Malformation–Associated Intracranial Aneurysms: A Systematic Literature Review
- 5 April 2022
- Published by Wiley in Journal of Engineering and Science in Medical Diagnostics and Therapy
- Vol. 5 (3)
Computational Fluid–Structure Interactions in the Human Cerebrovascular System: Part 2—A Review of Current Applications of Computational Fluid Dynamics and Structural Mechanics in Cerebrovascular Pathophysiology
The cerebrovascular system is an intricate structure that carries blood to and from the brain. Though the overall structures remain relatively the same from person to person, variations of vessel caliber and connections are common. From these vessels, abnormalities of wall structure can result in cerebral aneurysms, which are often prone to rupture and abnormalities in development result in abnormal high flow to low flow connections called arteriovenous malformations. Sometimes posing a great risk for catastrophic brain injury or death, and understanding which of these malformations will rupture, is important in deciding the risk of conservative management versus invasive treatment. Fluid–structure interaction (FSI) studies are widely utilized for modeling the interaction between deformable structures and their apposed fluid flow such as between blood and vessel walls. As there are significant differences in the thickness of cerebral blood vessels compared to the systemic vasculature and the cerebral vasculature typically receives 20% of the cardiac output and maintains its own autoregulation, there are unique factors to consider in formulating a fluid structure interaction model. Here, we will be reviewing the current state of coupling mechanical and fluid dynamics in the understanding of cerebrovascular pathology and propose future directions for investigation.
- 5 April 2022
- Published by Wiley in Journal of Engineering and Science in Medical Diagnostics and Therapy
- Vol. 5 (3)
Computational Fluid–Structure Interactions in the Human Cerebrovascular System: Part 2—A Review of Current Applications of Computational Fluid Dynamics and Structural Mechanics in Cerebrovascular Pathophysiology
The cerebrovascular system is an intricate structure that carries blood to and from the brain. Though the overall structures remain relatively the same from person to person, variations of vessel caliber and connections are common. From these vessels, abnormalities of wall structure can result in cerebral aneurysms, which are often prone to rupture and abnormalities in development result in abnormal high flow to low flow connections called arteriovenous malformations. Sometimes posing a great risk for catastrophic brain injury or death, and understanding which of these malformations will rupture, is important in deciding the risk of conservative management versus invasive treatment. Fluid–structure interaction (FSI) studies are widely utilized for modeling the interaction between deformable structures and their apposed fluid flow such as between blood and vessel walls. As there are significant differences in the thickness of cerebral blood vessels compared to the systemic vasculature and the cerebral vasculature typically receives 20% of the cardiac output and maintains its own autoregulation, there are unique factors to consider in formulating a fluid structure interaction model. Here, we will be reviewing the current state of coupling mechanical and fluid dynamics in the understanding of cerebrovascular pathology and propose future directions for investigation.
- 18 March 2022
- Published by Wiley in Journal of Engineering and Science in Medical Diagnostics and Therapy
- Vol. 5 (3)
Computational Fluid–Structure Interactions in the Human Cerebrovascular System: Part 1—A Review of the Current Understanding of Cerebrovascular Biomechanics
Computational fluid–structure interaction (FSI) modeling is a technique used in engineering to understand the effect that fluid flow and surrounding structures have on one another. Used in the aerospace and turbine industries, when applied in the appropriate scenarios, the outcome of fluid–solid interaction analyses may yield more precise results than computational fluid dynamics or mechanical structural testing/analysis alone. For biological systems, such as the cerebrovascular system in humans, the inherent complexity of the system makes performing clinically accurate predictive computational modeling challenging. An isolated computational fluid dynamic analysis of the blood flow to predict cerebral aneurysm rupture or an isolated structural analysis of the cerebral aneurysm dome may be only part of the answer to predicting whether an aneurysm will rupture and over what time span. The variable pressures and flow rate of blood through vessels cause blood vessel walls to change shape, rebound, and move within the adjacent tissue. This rebounding movement, in turn, alters the flow pattern of blood. In pathologies such as cerebral aneurysms or cerebral arteriovenous malformations (AVMs) with unpredictable rupture profiles, these small interactions between blood flow and vessel distension may potentially explain the difference between a catastrophic hemorrhage and an entirely quiescent lesion. This two-part review evaluates (1) the current understanding of cerebrovascular fluid and structure mechanical properties and (2) the state of fluid–structure interaction models in the cerebrovascular systems. Additionally, as the cardiovascular FSI literature is much more extensive than the cerebrovascular literature, future potential studies that glean insight from that work are discussed.
- 18 March 2022
- Published by Wiley in Journal of Engineering and Science in Medical Diagnostics and Therapy
- Vol. 5 (3)
Computational Fluid–Structure Interactions in the Human Cerebrovascular System: Part 1—A Review of the Current Understanding of Cerebrovascular Biomechanics
Computational fluid–structure interaction (FSI) modeling is a technique used in engineering to understand the effect that fluid flow and surrounding structures have on one another. Used in the aerospace and turbine industries, when applied in the appropriate scenarios, the outcome of fluid–solid interaction analyses may yield more precise results than computational fluid dynamics or mechanical structural testing/analysis alone. For biological systems, such as the cerebrovascular system in humans, the inherent complexity of the system makes performing clinically accurate predictive computational modeling challenging. An isolated computational fluid dynamic analysis of the blood flow to predict cerebral aneurysm rupture or an isolated structural analysis of the cerebral aneurysm dome may be only part of the answer to predicting whether an aneurysm will rupture and over what time span. The variable pressures and flow rate of blood through vessels cause blood vessel walls to change shape, rebound, and move within the adjacent tissue. This rebounding movement, in turn, alters the flow pattern of blood. In pathologies such as cerebral aneurysms or cerebral arteriovenous malformations (AVMs) with unpredictable rupture profiles, these small interactions between blood flow and vessel distension may potentially explain the difference between a catastrophic hemorrhage and an entirely quiescent lesion. This two-part review evaluates (1) the current understanding of cerebrovascular fluid and structure mechanical properties and (2) the state of fluid–structure interaction models in the cerebrovascular systems. Additionally, as the cardiovascular FSI literature is much more extensive than the cerebrovascular literature, future potential studies that glean insight from that work are discussed.