Yoji Kobayashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yoji Kobayashi has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Hiroshi Kageyama
Kyoto University
7 shared publications Cédric Tassel
Graduate School of Engineering Kyoto University Nishikyo‐ku Kyoto 615‐8510 Japan
4 shared publications- Takafumi Yamamoto
Kyoto University Kitashirakawa Oiwake-cho, Sakyoku
4 shared publications Ya Tang
Graduate School of Engineering Kyoto University Nishikyo‐ku Kyoto 615‐8510 Japan
4 shared publicationsNaoya Masuda
Graduate School of Engineering Kyoto University Nishikyo‐ku Kyoto 615‐8510 Japan
3 shared publications- Cédric Tassel
Department of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Nishikyo-ku, Kyoto 615-8510, Japan
2 shared publications
Latest Publications
- 8 November 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (36)
Metal‐Dependent Support Effects of Oxyhydride‐Supported Ru, Fe, Co Catalysts for Ammonia Synthesis
Ammonia is an attractive energy carrier for the hydrogen economy, given its high hydrogen density and ease of liquefaction. A titanate oxyhydride has recently been demonstrated that can catalyze ammonia synthesis without Ru or Fe metal, despite titanium being regarded as an inert element. Here, the synthesis activity of ammonia is examined when Ru, Fe, and Co particles are supported onto the oxyhydride BaTiO2.5H0.5. The activity of BaTiO2.5H0.5 as support is significantly higher than BaTiO3. For example, the activity for Fe and Co increases by a factor of 70–400, making them more active than Ru/MgO, one conventional Ru catalyst. In terms of mechanism, for Ru, H/D isotope studies show participation of lattice hydride in the catalytic cycle, while kinetic analysis shows reduced H2 poisoning probably due to spillover. For Fe (and Co), the presence of hydride results in significantly lower activation energy and N2 reaction order, likely due to strong electron donation from the oxyhydride. This metal‐dependent support effect is further verified by N2 isotopic exchange experiments. These perovskite‐type oxyhydrides can be easily modified in terms of A‐ and B‐site (A = Ba, B = Ti); the high potential for compositional variation and morphologies will expand the search for efficient catalysts for ammonia synthesis.
- 8 November 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (36)
Metal‐Dependent Support Effects of Oxyhydride‐Supported Ru, Fe, Co Catalysts for Ammonia Synthesis
Ammonia is an attractive energy carrier for the hydrogen economy, given its high hydrogen density and ease of liquefaction. A titanate oxyhydride has recently been demonstrated that can catalyze ammonia synthesis without Ru or Fe metal, despite titanium being regarded as an inert element. Here, the synthesis activity of ammonia is examined when Ru, Fe, and Co particles are supported onto the oxyhydride BaTiO2.5H0.5. The activity of BaTiO2.5H0.5 as support is significantly higher than BaTiO3. For example, the activity for Fe and Co increases by a factor of 70–400, making them more active than Ru/MgO, one conventional Ru catalyst. In terms of mechanism, for Ru, H/D isotope studies show participation of lattice hydride in the catalytic cycle, while kinetic analysis shows reduced H2 poisoning probably due to spillover. For Fe (and Co), the presence of hydride results in significantly lower activation energy and N2 reaction order, likely due to strong electron donation from the oxyhydride. This metal‐dependent support effect is further verified by N2 isotopic exchange experiments. These perovskite‐type oxyhydrides can be easily modified in terms of A‐ and B‐site (A = Ba, B = Ti); the high potential for compositional variation and morphologies will expand the search for efficient catalysts for ammonia synthesis.
- 5 July 2018
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 47 (7) , 829-832
High Pressure Synthesis of Hydride-fluoride Pyrochlore NaCaMg2F7−xHx
The hydride-fluoride pyrochlore NaCaMg2F7−xHx has been synthesized at high pressure (2 GPa) from binary fluorides and hydrides. Contrary to initial expectations, we did not find strong evidence of selective hydride substitution in special anionic sites. F-center formation under UV irradiation at room temperature was observed, demonstrating the potential lability of hydride and enabling further systematic studies.
- 5 July 2018
- Published by Oxford University Press (OUP) in Chemistry Letters
- Vol. 47 (7) , 829-832
High Pressure Synthesis of Hydride-fluoride Pyrochlore NaCaMg2F7−xHx
The hydride-fluoride pyrochlore NaCaMg2F7−xHx has been synthesized at high pressure (2 GPa) from binary fluorides and hydrides. Contrary to initial expectations, we did not find strong evidence of selective hydride substitution in special anionic sites. F-center formation under UV irradiation at room temperature was observed, demonstrating the potential lability of hydride and enabling further systematic studies.
- 6 December 2017
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 139 (50) , 18240-18246
Titanium-Based Hydrides as Heterogeneous Catalysts for Ammonia Synthesis
The problem of activating N2 and its subsequent hydrogenation to form NH3 has been approached from many directions. One of these approaches involves the use of transition metal hydride complexes. Recently, transition metal hydride complexes of Ti and Ta have been shown to activate N2, but without catalytic formation of NH3. Here, we show that at elevated temperatures (400 °C, 5 MPa), solid-state hydride-containing Ti compounds (TiH2 and BaTiO2.5H0.5) form a nitride-hydride surface similar to those observed with titanium clusters, but continuously (∼7 days) form NH3 under H2/N2 flow conditions to achieve a catalytic cycle, with activity (up to 2.8 mmol·g·–1·h–1) almost comparable to conventional supported Ru catalysts such as Cs–Ru/MgO or Ru/BaTiO3 that we have tested. As with the homogeneous analogues, the initial presence of hydride within the catalyst is critical. A rare hydrogen-based Mars van Krevelen mechanism may be at play here. Conventional scaling rules of pure metals predict essentially no activity for Ti, making this a previously overlooked element, but our results show that by introducing hydride, the repertoire of heterogeneous catalysts can be expanded to include formerly unexamined compositions without resorting to precious metals.
- 6 December 2017
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 139 (50) , 18240-18246
Titanium-Based Hydrides as Heterogeneous Catalysts for Ammonia Synthesis
The problem of activating N2 and its subsequent hydrogenation to form NH3 has been approached from many directions. One of these approaches involves the use of transition metal hydride complexes. Recently, transition metal hydride complexes of Ti and Ta have been shown to activate N2, but without catalytic formation of NH3. Here, we show that at elevated temperatures (400 °C, 5 MPa), solid-state hydride-containing Ti compounds (TiH2 and BaTiO2.5H0.5) form a nitride-hydride surface similar to those observed with titanium clusters, but continuously (∼7 days) form NH3 under H2/N2 flow conditions to achieve a catalytic cycle, with activity (up to 2.8 mmol·g·–1·h–1) almost comparable to conventional supported Ru catalysts such as Cs–Ru/MgO or Ru/BaTiO3 that we have tested. As with the homogeneous analogues, the initial presence of hydride within the catalyst is critical. A rare hydrogen-based Mars van Krevelen mechanism may be at play here. Conventional scaling rules of pure metals predict essentially no activity for Ti, making this a previously overlooked element, but our results show that by introducing hydride, the repertoire of heterogeneous catalysts can be expanded to include formerly unexamined compositions without resorting to precious metals.
- Open Access
- 16 November 2017
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 18 (1) , 905-918
New chemistry of transition metal oxyhydrides
In this review we describe recent advances in transition metal oxyhydride chemistry obtained by topochemical routes, such as low temperature reduction with metal hydrides, or high-pressure solid-state reactions. Besides the crystal chemistry, magnetic and transport properties of the bulk powder and epitaxial thin film samples, the remarkable lability of the hydride anion is particularly highlighted as a new strategy to discover unprecedented mixed anion materials.
- 16 November 2017
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 18 (1) , 905-918
Open AccessNew chemistry of transition metal oxyhydrides
In this review we describe recent advances in transition metal oxyhydride chemistry obtained by topochemical routes, such as low temperature reduction with metal hydrides, or high-pressure solid-state reactions. Besides the crystal chemistry, magnetic and transport properties of the bulk powder and epitaxial thin film samples, the remarkable lability of the hydride anion is particularly highlighted as a new strategy to discover unprecedented mixed anion materials.
- 18 September 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (19) , 8187-8194
On Hydride Diffusion in Transition Metal Perovskite Oxyhydrides Investigated via Deuterium Exchange
- 18 September 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (19) , 8187-8194
On Hydride Diffusion in Transition Metal Perovskite Oxyhydrides Investigated via Deuterium Exchange
- 30 November 2015
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 137 (48) , 15315-15321
Hydride in BaTiO2.5H0.5: A Labile Ligand in Solid State Chemistry
In synthesizing mixed anion oxides, direct syntheses have often been employed, usually involving high temperature and occasionally high pressure. Compared with these methods, here we show how the use of a titanium perovskite oxyhydride (BaTiO2.5H0.5) as a starting material enables new multistep low temperature topochemical routes to access mixed anion compounds. Similar to labile ligands in inorganic complexes, the lability of H– provides the necessary reactivity for syntheses, leading to reactions and products previously difficult to obtain. For example, BaTiO2.5N0.2 can be prepared with the otherwise inert N2 gas at 400–600 °C, in marked contrast with currently available oxynitride synthetic routes. F–/H– exchange can also be accomplished at 150 °C, yielding the oxyhydride-fluoride BaTi(O, H, F)3. For BaTiO2.4D0.3F0.3, we find evidence that further anionic exchange with OD– yields BaTiO2.4(D–)0.26(OD–)0.34, which implies stable coexistence of H+ and H– at ambient conditions. Such an arrangement is therm...
- 30 November 2015
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 137 (48) , 15315-15321
Hydride in BaTiO2.5H0.5: A Labile Ligand in Solid State Chemistry
In synthesizing mixed anion oxides, direct syntheses have often been employed, usually involving high temperature and occasionally high pressure. Compared with these methods, here we show how the use of a titanium perovskite oxyhydride (BaTiO2.5H0.5) as a starting material enables new multistep low temperature topochemical routes to access mixed anion compounds. Similar to labile ligands in inorganic complexes, the lability of H– provides the necessary reactivity for syntheses, leading to reactions and products previously difficult to obtain. For example, BaTiO2.5N0.2 can be prepared with the otherwise inert N2 gas at 400–600 °C, in marked contrast with currently available oxynitride synthetic routes. F–/H– exchange can also be accomplished at 150 °C, yielding the oxyhydride-fluoride BaTi(O, H, F)3. For BaTiO2.4D0.3F0.3, we find evidence that further anionic exchange with OD– yields BaTiO2.4(D–)0.26(OD–)0.34, which implies stable coexistence of H+ and H– at ambient conditions. Such an arrangement is therm...
- 21 November 2014
- Published by Wiley in Angewandte Chemie
- Vol. 127 (2) , 526-531
MnTaO2N: Polar LiNbO3‐type Oxynitride with a Helical Spin Order
- 21 November 2014
- Published by Wiley in Angewandte Chemie
- Vol. 127 (2) , 526-531
MnTaO2N: Polar LiNbO3‐type Oxynitride with a Helical Spin Order
- 12 August 2014
- Published by Wiley in Angewandte Chemie
- Vol. 126 (39) , 10545-10548
Direct Synthesis of Chromium Perovskite Oxyhydride with a High Magnetic‐Transition Temperature
- 12 August 2014
- Published by Wiley in Angewandte Chemie
- Vol. 126 (39) , 10545-10548
Direct Synthesis of Chromium Perovskite Oxyhydride with a High Magnetic‐Transition Temperature
- 6 January 2014
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 91 (2) , 255-258
Illustrating Catalysis with Interlocking Building Blocks: A Ruthenium Carbene Complex for Olefin Metathesis Reactions
- 6 January 2014
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 91 (2) , 255-258
Illustrating Catalysis with Interlocking Building Blocks: A Ruthenium Carbene Complex for Olefin Metathesis Reactions