Hong-Shuang Di
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hong-Shuang Di has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
Qian Sun
The State Key Laboratory of Rolling and Automation of Northeastern University
3 shared publicationsDewen Zhao
2 shared publicationsDianhua Zhang
2 shared publicationsMeiying Zhao
2 shared publicationsR. D. K. Misra
University of Texas at El Paso
2 shared publications- Wei Xu
State Key Laboratory of Digital Steel, Northeastern University, Shenyang, China
2 shared publications
Latest Publications
- 13 December 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (1) , 445-462
Enhancing sulfur embrittlement resistance in Ni-based superalloys through synergistic effects of boron and carbon co-doping
- 13 December 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 60 (1) , 445-462
Enhancing sulfur embrittlement resistance in Ni-based superalloys through synergistic effects of boron and carbon co-doping
- 23 May 2023
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 33 (10) , 4962-4975
Microstructure and Mechanical Properties of TA2/304 Weld Seam with Cu Transition Layer under Bias Oscillation Laser Welding Process
- 23 May 2023
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 33 (10) , 4962-4975
Microstructure and Mechanical Properties of TA2/304 Weld Seam with Cu Transition Layer under Bias Oscillation Laser Welding Process
- Open Access
- 17 May 2022
- Published by Springer Nature in Research Square
A novel analytical heat source model for cold rolling based on the energy method and unified yield criterion
Accurate calculation of the heat source in the roll gap during the cold rolling process is the basis for a well-designed coolant system, which is particularly important for reducing roll wear and improving the flatness quality of strip steel. Although many established numerical models have high precision in calculating the work roll temperature, complex modeling processes and large calculation times result in the inability to predict work roll temperature quickly for the application of automatic control systems. Therefore, the authors develop a new analytical heat source model to calculate the axial temperature distribution of the work roll in the cold rolling process. First, according to the deformation characteristics of strip cold rolling, the deformation zone is divided into a plastic zone and two elastic zones, and the length of each deformation zone is calculated considering the effect of tension. Then friction heat generated in the elastic zone is calculated. Second, new exponential velocity and corresponding strain-rate fields satisfying kinematically admissible conditions are proposed to calculate the deformation heat and friction heat generated in the plastic zone. Finally, the work roll temperature prediction model is established by contemplating the heat source of the roll gap, emulsion heat transfer, air cooling, and contact heat transfer with the intermediate roll. By repeatedly optimizing the weighted coefficient d of intermediate principal shear stress on the yield criterion, the maximum error between the calculated results and the actual measured cold roll temperature data is reduced to 3.1%. Then, the effects of the reduction ratio, rolling speed, and resistance to deformation on the deformation heat and friction heat are discussed. And the variation of temperature field of the work roll with time is analyzed quantitatively.
- 17 May 2022
- Published by Springer Nature in Research Square
Open AccessA novel analytical heat source model for cold rolling based on the energy method and unified yield criterion
Accurate calculation of the heat source in the roll gap during the cold rolling process is the basis for a well-designed coolant system, which is particularly important for reducing roll wear and improving the flatness quality of strip steel. Although many established numerical models have high precision in calculating the work roll temperature, complex modeling processes and large calculation times result in the inability to predict work roll temperature quickly for the application of automatic control systems. Therefore, the authors develop a new analytical heat source model to calculate the axial temperature distribution of the work roll in the cold rolling process. First, according to the deformation characteristics of strip cold rolling, the deformation zone is divided into a plastic zone and two elastic zones, and the length of each deformation zone is calculated considering the effect of tension. Then friction heat generated in the elastic zone is calculated. Second, new exponential velocity and corresponding strain-rate fields satisfying kinematically admissible conditions are proposed to calculate the deformation heat and friction heat generated in the plastic zone. Finally, the work roll temperature prediction model is established by contemplating the heat source of the roll gap, emulsion heat transfer, air cooling, and contact heat transfer with the intermediate roll. By repeatedly optimizing the weighted coefficient d of intermediate principal shear stress on the yield criterion, the maximum error between the calculated results and the actual measured cold roll temperature data is reduced to 3.1%. Then, the effects of the reduction ratio, rolling speed, and resistance to deformation on the deformation heat and friction heat are discussed. And the variation of temperature field of the work roll with time is analyzed quantitatively.
- Open Access
- 21 May 2021
- Published by Springer Nature in Research Square
The Optimization Solution of the Vertical Rolling Force by Using Unified Yield Criterion
Vertical rolling is an important technique to control the width of continuous casting slab in hot rolling field. Accurate prediction of vertical rolling force is a core point to maintain rolling mill equipment. Due to the limitation of the algorithm, the prediction accuracy of most vertical rolling force models based on the energy method can only reach more than 10%. Therefore, it is challenging to optimize the rolling force model to improve the prediction accuracy. This paper presents an innovative approach for optimizing the calculation of vertical rolling force with a unified yield criterion. Firstly, the maximal width of dog bone region is determined by the slip-line method and described the dog bone shape via sine function model. Furthermore, proposed velocity and corresponding strain rate fields satisfy kinematically admissible condition is used to calculate the total power. Finally, the analytical solution of the rolling force and dog bone shape model is obtained by repeatedly optimizing the weighted coefficient b of intermediate principal shear stress on the yield criterion. And the effectiveness of the proposed mechanical model is verified by measured data in strip hot rolling field and other models’ results. The results shows that the prediction accuracy of vertical rolling force model can be improved by optimizing the value of b. Then, the impacts of reduction rate, initial thickness and friction factor on dog-bone shape size and vertical rolling force are discussed.
- 21 May 2021
- Published by Springer Nature in Research Square
Open AccessThe Optimization Solution of the Vertical Rolling Force by Using Unified Yield Criterion
Vertical rolling is an important technique to control the width of continuous casting slab in hot rolling field. Accurate prediction of vertical rolling force is a core point to maintain rolling mill equipment. Due to the limitation of the algorithm, the prediction accuracy of most vertical rolling force models based on the energy method can only reach more than 10%. Therefore, it is challenging to optimize the rolling force model to improve the prediction accuracy. This paper presents an innovative approach for optimizing the calculation of vertical rolling force with a unified yield criterion. Firstly, the maximal width of dog bone region is determined by the slip-line method and described the dog bone shape via sine function model. Furthermore, proposed velocity and corresponding strain rate fields satisfy kinematically admissible condition is used to calculate the total power. Finally, the analytical solution of the rolling force and dog bone shape model is obtained by repeatedly optimizing the weighted coefficient b of intermediate principal shear stress on the yield criterion. And the effectiveness of the proposed mechanical model is verified by measured data in strip hot rolling field and other models’ results. The results shows that the prediction accuracy of vertical rolling force model can be improved by optimizing the value of b. Then, the impacts of reduction rate, initial thickness and friction factor on dog-bone shape size and vertical rolling force are discussed.
- 4 November 2019
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 28 (11) , 7006-7015
A Comparative Analysis on Microstructure and Fracture Mechanism of X100 Pipeline Steel CGHAZ Between Laser Welding and Arc Welding
- 4 November 2019
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 28 (11) , 7006-7015
A Comparative Analysis on Microstructure and Fracture Mechanism of X100 Pipeline Steel CGHAZ Between Laser Welding and Arc Welding
- 17 September 2019
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 116 (6) , 616
Effect of heat input on microstructure and properties of dissimilar laser welded joints between TWIP and TRIP steels
In this present, the experimental steels were produced by different rolling and heat treatment processes. After that, dissimilar laser tailor welding was carried out with different heat inputs (40, 60 and 100 J/mm2) using IPG YLR 6000 fiber laser with Ar gas shielding. Hitachi SU5000 scanning electron microscope (SEM) and Zeiss Axio Vert.Al optical microscope were used to observe the microstructure of the welded joints after being polished and etched with 4% nital. HV-1000 microhardness tester was used to measure the microhardness of welded joints. Tensile test was carried out using DNS-100 universal material testing equipment, and Erichsen test was conducted using CTM604 Erichsen test machine. Five groups of repeated experiments were selected for the performance test. Tensile fracture surface morphology of welded joint was observed by SEM. The effect of heat input on microstructure and properties of dissimilar welded joints between high manganese TWIP steels and low manganese TRIP steels was studied. The results showed that weld width and penetration were increased and complete penetration was obtained when the heat input increased to 60 J/mm2. With heat input increased, the microstructure of welded seam was more inhomogeneous. The distribution of Mn content in welded seam was inhomogeneous such that columnar/equiaxed austenite was formed in rich Mn zone and lath martensite was formed in barren Mn zone. Heat input had no influence on the microstructure and hardness on the HAZ. The mechanical properties of welded joints of 60 J/mm2 were superior and its strength-ductility balance was greater than TRIP BM (23 GPa%) and was 82% of TWIP BM (36 GPa%). The formability of 60 and 100 J/mm2 was similar.
- 17 September 2019
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 116 (6) , 616
Effect of heat input on microstructure and properties of dissimilar laser welded joints between TWIP and TRIP steels
In this present, the experimental steels were produced by different rolling and heat treatment processes. After that, dissimilar laser tailor welding was carried out with different heat inputs (40, 60 and 100 J/mm2) using IPG YLR 6000 fiber laser with Ar gas shielding. Hitachi SU5000 scanning electron microscope (SEM) and Zeiss Axio Vert.Al optical microscope were used to observe the microstructure of the welded joints after being polished and etched with 4% nital. HV-1000 microhardness tester was used to measure the microhardness of welded joints. Tensile test was carried out using DNS-100 universal material testing equipment, and Erichsen test was conducted using CTM604 Erichsen test machine. Five groups of repeated experiments were selected for the performance test. Tensile fracture surface morphology of welded joint was observed by SEM. The effect of heat input on microstructure and properties of dissimilar welded joints between high manganese TWIP steels and low manganese TRIP steels was studied. The results showed that weld width and penetration were increased and complete penetration was obtained when the heat input increased to 60 J/mm2. With heat input increased, the microstructure of welded seam was more inhomogeneous. The distribution of Mn content in welded seam was inhomogeneous such that columnar/equiaxed austenite was formed in rich Mn zone and lath martensite was formed in barren Mn zone. Heat input had no influence on the microstructure and hardness on the HAZ. The mechanical properties of welded joints of 60 J/mm2 were superior and its strength-ductility balance was greater than TRIP BM (23 GPa%) and was 82% of TWIP BM (36 GPa%). The formability of 60 and 100 J/mm2 was similar.
- Open Access
A Study on Microstructure and Properties of PHS Fiber Laser Welded Joints Obtained in Air Atmospheres
Press-hardened steels (PHS) with a 1.5-mm-thick coated Al–Si layer is welded using an IPG YLS6000 continuous fiber laser in the air atmosphere. An SU5000 scanning electron microscope (SEM) and an Oxford EDS X-Max20 energy spectrometer are used to characterize the microstructure, which consists of delta (δ)-ferrite and lath martensite. It is similar to that of the welding performed in the Ar atmosphere, but the content of δ-ferrite is less. The reason is the formation of Al2O3 inclusions in the molten pool, which reacts with oxygen from the air ambient and the Al from the molten Al–Si coating of PHS. The oxygen content is measured with an ONH-3000 analyzer. An HV-1000 microhardness tester and DNS-100 universal material test equipment are performed to test the hardness and tensile strength. Similar hardness and strength of welded joints are achieved welding in the air atmosphere compared to that of the Ar atmosphere. Fracture was initialed in the fusion line of overlapping zone and propagated along the interface of two plates and fusion line due to the Al segregation.
Open AccessA Study on Microstructure and Properties of PHS Fiber Laser Welded Joints Obtained in Air Atmospheres
Press-hardened steels (PHS) with a 1.5-mm-thick coated Al–Si layer is welded using an IPG YLS6000 continuous fiber laser in the air atmosphere. An SU5000 scanning electron microscope (SEM) and an Oxford EDS X-Max20 energy spectrometer are used to characterize the microstructure, which consists of delta (δ)-ferrite and lath martensite. It is similar to that of the welding performed in the Ar atmosphere, but the content of δ-ferrite is less. The reason is the formation of Al2O3 inclusions in the molten pool, which reacts with oxygen from the air ambient and the Al from the molten Al–Si coating of PHS. The oxygen content is measured with an ONH-3000 analyzer. An HV-1000 microhardness tester and DNS-100 universal material test equipment are performed to test the hardness and tensile strength. Similar hardness and strength of welded joints are achieved welding in the air atmosphere compared to that of the Ar atmosphere. Fracture was initialed in the fusion line of overlapping zone and propagated along the interface of two plates and fusion line due to the Al segregation.
- 17 January 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (2) , 847-856
Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel
- 17 January 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (2) , 847-856
Microstructure-Property Correlations in Fiber Laser Welded Nb-Ti Microalloyed C-Mn Steel
- 14 November 2017
- Published by Elsevier in Acta Metallurgica Sinica (English Letters)
- Vol. 31 (5) , 503-514
Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity Steel: Microstructural Evolution and Flow Stress Behavior
- 14 November 2017
- Published by Elsevier in Acta Metallurgica Sinica (English Letters)
- Vol. 31 (5) , 503-514
Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity Steel: Microstructural Evolution and Flow Stress Behavior