Memoon Sajid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Memoon Sajid has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Faisal Saeed Awan
Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, Pakistan
2 shared publications Gul Hassan
Department of Electrical Engineering, Islamic International University Islamabad, Pakistan
2 shared publications- Kyung Hyun Choi
Department of Mechatronics Engineering, Jeju National University, Jeju, Republic of Korea
2 shared publications Mazhar Javed
Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, Swabi, K.P. 23640, Pakistan
2 shared publications- Mazhar Javed
Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi 23460, Pakistan
2 shared publications - Zarak Jamal Khattak
Faculty of Electrical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, Pakistan
2 shared publications
Latest Publications
- Open Access
- 28 July 2025
- Published by Institute of Central Computation and Knowledge Inc. in ICCK Transactions on Sensing, Communication, and Control
- Vol. 2 (3) , 168-199
Strain Sensing Technologies: Recent Developments in Materials, Performance, and Applications
Strain sensors have become fundamental to contemporary sensing technology driven by the growing demand for flexible, sensitive, and durable sensors, transforming across a broad range of applications including medical care, robotics, structural monitoring, human-machine interface and robotics. The swift progress in the fields of materials and nanotechnology has facilitated the fabrication of very flexible, resilient, and ultra-sensitive strain sensors, enabling the emergence of next-generation electronic devices. This mini review covers sensors, strain sensors' fundamentals, classifications, innovative materials utilized, applications overall provide an in-depth analysis of the latest developments in strain sensor. Emerging materials that have together pushed the limits of sensor performance in terms of gauge factors, stretchability, reaction time, and durability are highlighted, including self-healing polymers, hybrid nanomaterials, graphene derivatives, carbon nanotube composites, and hydrogels. Even with impressive advancements, issues like biocompatibility, durability and many more factors continue to be major roadblocks to practical integration. Additionally, innovative solutions that enhance mechanical conformance and long-term stability are addressed in conjunction with challenges associated with packaging, integration, and other factors. This article offers a thorough roadmap for future research and real-world application of strain sensors in wearable electronics, soft robotics, and healthcare monitoring systems by combining recent literature and emphasizing important insights into the engineering of materials and functional performance. Finally, the analysis highlights emerging trends and possible prospects for next-generation strain sensing technologies that combine multi-functionality, self-healing, and scalable fabrication to fulfill real-world application demands.
- 28 July 2025
- Published by Institute of Central Computation and Knowledge Inc. in ICCK Transactions on Sensing, Communication, and Control
- Vol. 2 (3) , 168-199
Open AccessStrain Sensing Technologies: Recent Developments in Materials, Performance, and Applications
Strain sensors have become fundamental to contemporary sensing technology driven by the growing demand for flexible, sensitive, and durable sensors, transforming across a broad range of applications including medical care, robotics, structural monitoring, human-machine interface and robotics. The swift progress in the fields of materials and nanotechnology has facilitated the fabrication of very flexible, resilient, and ultra-sensitive strain sensors, enabling the emergence of next-generation electronic devices. This mini review covers sensors, strain sensors' fundamentals, classifications, innovative materials utilized, applications overall provide an in-depth analysis of the latest developments in strain sensor. Emerging materials that have together pushed the limits of sensor performance in terms of gauge factors, stretchability, reaction time, and durability are highlighted, including self-healing polymers, hybrid nanomaterials, graphene derivatives, carbon nanotube composites, and hydrogels. Even with impressive advancements, issues like biocompatibility, durability and many more factors continue to be major roadblocks to practical integration. Additionally, innovative solutions that enhance mechanical conformance and long-term stability are addressed in conjunction with challenges associated with packaging, integration, and other factors. This article offers a thorough roadmap for future research and real-world application of strain sensors in wearable electronics, soft robotics, and healthcare monitoring systems by combining recent literature and emphasizing important insights into the engineering of materials and functional performance. Finally, the analysis highlights emerging trends and possible prospects for next-generation strain sensing technologies that combine multi-functionality, self-healing, and scalable fabrication to fulfill real-world application demands.
- 14 April 2023
- Published by Springer Nature in Lasers in Manufacturing and Materials Processing
- Vol. 10 (2) , 276-295
Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers
- 14 April 2023
- Published by Springer Nature in Lasers in Manufacturing and Materials Processing
- Vol. 10 (2) , 276-295
Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers
- Open Access
- 5 December 2022
- Published by Springer Nature in Research Square
Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers
Fabrication of conductive patterns for flexible and printed electronic devices is one of the most challenging steps in the whole process. Conductive patterns in electronic devices are used as electrodes, transducers, connecting links, and sometimes, also as the active sensing elements. Since the introduction of laser induced graphene (LIG), it has been explored to print electrodes and connecting patterns for various electronic devices and systems. This work focuses on an in-house developed laser printing system and the comparison of various electrical, chemical, and morphological properties of the resulting LIG patterns using CO2 and diode lasers. The system parameters including the laser power, relative printing speed, and the printing resolution were explored and optimized to achieve conductive patterns with varying properties suitable for different targeted applications. The fabricated patterns were characterized for their sheet resistance, surface morphology using scanning electron microscope (SEM), chemical properties using Energy Dispersive (EDS) and RAMAN spectroscopies, and physical size and resolution using optical microscopy. Continuous conductive patterns with sheet resistance in range of 11.5 Ω/□ to 43 Ω/□ were achieved using CO2 laser with a minimum achievable pattern width of ~ 180 µm while patterns with sheet resistance in range of 19 Ω/□ to 105 Ω/□ were achieved using diode laser with a minimum pattern width of ~ 190 µm. The chemical and morphological properties of CO2 laser-based patterns indicate the formation of 2D graphite sheets with high porosity and low O2 concentration while the diode laser-based patterns have a lower porosity and higher percentage of O2 indicating burning and the formation of oxides. Various applications of both types have also been discussed based on their respective properties.
- 5 December 2022
- Published by Springer Nature in Research Square
Open AccessFabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers
Fabrication of conductive patterns for flexible and printed electronic devices is one of the most challenging steps in the whole process. Conductive patterns in electronic devices are used as electrodes, transducers, connecting links, and sometimes, also as the active sensing elements. Since the introduction of laser induced graphene (LIG), it has been explored to print electrodes and connecting patterns for various electronic devices and systems. This work focuses on an in-house developed laser printing system and the comparison of various electrical, chemical, and morphological properties of the resulting LIG patterns using CO2 and diode lasers. The system parameters including the laser power, relative printing speed, and the printing resolution were explored and optimized to achieve conductive patterns with varying properties suitable for different targeted applications. The fabricated patterns were characterized for their sheet resistance, surface morphology using scanning electron microscope (SEM), chemical properties using Energy Dispersive (EDS) and RAMAN spectroscopies, and physical size and resolution using optical microscopy. Continuous conductive patterns with sheet resistance in range of 11.5 Ω/□ to 43 Ω/□ were achieved using CO2 laser with a minimum achievable pattern width of ~ 180 µm while patterns with sheet resistance in range of 19 Ω/□ to 105 Ω/□ were achieved using diode laser with a minimum pattern width of ~ 190 µm. The chemical and morphological properties of CO2 laser-based patterns indicate the formation of 2D graphite sheets with high porosity and low O2 concentration while the diode laser-based patterns have a lower porosity and higher percentage of O2 indicating burning and the formation of oxides. Various applications of both types have also been discussed based on their respective properties.
- Top Cited Papers
- 28 November 2022
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 45 (4) , 1-24
Progress and future of relative humidity sensors: a review from materials perspective
- 28 November 2022
- Published by Springer Nature in Bulletin of Materials Science
- Vol. 45 (4) , 1-24
Top Cited PapersProgress and future of relative humidity sensors: a review from materials perspective
- Open Access
- 6 May 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (19) , 16605-16615
Mass-Producible 2D Nanocomposite-Based Temperature-Independent All-Printed Relative Humidity Sensor
Relative humidity sensors are widely studied under the categories of both environmental and biosensors owing to their vast reaching applications. The research on humidity sensors is mainly divided into two concentration areas including novel material development and novel device structure. Another approach focuses on the development of printed sensors with performance comparable to the sensors fabricated via conventional techniques. The major challenges in the research on relative humidity sensors include the range of detection, sensitivity (especially at lower %RH), transient response time, and dependence on temperature. Temperature dependence is one of the least studied parameters in relative humidity sensor development. In this work, relative humidity sensors were fabricated using all-printed approaches that are also compatible with mass production, resulting in low cost and easy development. Laser-induced graphene (LIG)-based printed electrodes were used as the transducers, while the 2D MoS2 and graphene nanocomposite was used as the active layer material with the built-in property of temperature independence. The exfoliation process of 2D MoS2 was based on wet grinding, while graphene for the active layer was obtained by scratching the graphene grown on the polyimide (PI) surface via laser ablation. The resulting sensors showed an excellent output response for a full range of 0%RH to 100%RH, having no dependence on the surrounding temperature, and excellent response and recovery times of 4 and 2 s, respectively. The developed sensors can be confidently employed for a wide range of humidity sensing applications where the temperature of the surrounding environment is not constant.
- 6 May 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (19) , 16605-16615
Open AccessMass-Producible 2D Nanocomposite-Based Temperature-Independent All-Printed Relative Humidity Sensor
Relative humidity sensors are widely studied under the categories of both environmental and biosensors owing to their vast reaching applications. The research on humidity sensors is mainly divided into two concentration areas including novel material development and novel device structure. Another approach focuses on the development of printed sensors with performance comparable to the sensors fabricated via conventional techniques. The major challenges in the research on relative humidity sensors include the range of detection, sensitivity (especially at lower %RH), transient response time, and dependence on temperature. Temperature dependence is one of the least studied parameters in relative humidity sensor development. In this work, relative humidity sensors were fabricated using all-printed approaches that are also compatible with mass production, resulting in low cost and easy development. Laser-induced graphene (LIG)-based printed electrodes were used as the transducers, while the 2D MoS2 and graphene nanocomposite was used as the active layer material with the built-in property of temperature independence. The exfoliation process of 2D MoS2 was based on wet grinding, while graphene for the active layer was obtained by scratching the graphene grown on the polyimide (PI) surface via laser ablation. The resulting sensors showed an excellent output response for a full range of 0%RH to 100%RH, having no dependence on the surrounding temperature, and excellent response and recovery times of 4 and 2 s, respectively. The developed sensors can be confidently employed for a wide range of humidity sensing applications where the temperature of the surrounding environment is not constant.
- 19 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (13) , 14906-14914
Facile and Low Cost Temperature Compensated Humidity Sensor and Signal Conditioning System
Most relative humidity sensors are resistive or capacitive sensors. It’s a fact that the resistance and capacitance of a vast majority of such sensors also depend on the surrounding temperature and a change of temperature can cause significant errors in the final reading of relative humidity. This fact of temperature dependence is scarcely investigated in development of humidity sensors. In this work, a very simple temperature compensation method has been developed that automatically eliminates the effect of change in temperature from the final output without requiring separate measurement of temperature or any data processing. Amorphous polyethylene oxide (PEO) was used as the active material for humidity sensor owing to its high sensitivity and almost linear response. Interdigitated type sensor electrodes (IDE) were fabricated using reverse offset printing on glass substrate and the active layer was deposited through spin coating. An identical twin sensor was fabricated with the same parameters and was additionally encapsulated form the open environment. The dummy sensor was used as opposing pair with the active sensor in a bridge configuration to achieve temperature compensation. The bridge sensitivity was recorded to be ~2.9 mV/%RH that was further improved to 100 mV/%RH using a differential instrumentation amplifier based signal conditioning circuit. The sensor system was deployed in a real-life relative humidity measurement with changing temperature that returned a remarkable accuracy of 98.76%. The error due to temperature dependence reduced from 22.4% to just 1.24%. The transient response time of the sensor was found to be ~2.4 s.
- 19 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 21 (13) , 14906-14914
Facile and Low Cost Temperature Compensated Humidity Sensor and Signal Conditioning System
Most relative humidity sensors are resistive or capacitive sensors. It’s a fact that the resistance and capacitance of a vast majority of such sensors also depend on the surrounding temperature and a change of temperature can cause significant errors in the final reading of relative humidity. This fact of temperature dependence is scarcely investigated in development of humidity sensors. In this work, a very simple temperature compensation method has been developed that automatically eliminates the effect of change in temperature from the final output without requiring separate measurement of temperature or any data processing. Amorphous polyethylene oxide (PEO) was used as the active material for humidity sensor owing to its high sensitivity and almost linear response. Interdigitated type sensor electrodes (IDE) were fabricated using reverse offset printing on glass substrate and the active layer was deposited through spin coating. An identical twin sensor was fabricated with the same parameters and was additionally encapsulated form the open environment. The dummy sensor was used as opposing pair with the active sensor in a bridge configuration to achieve temperature compensation. The bridge sensitivity was recorded to be ~2.9 mV/%RH that was further improved to 100 mV/%RH using a differential instrumentation amplifier based signal conditioning circuit. The sensor system was deployed in a real-life relative humidity measurement with changing temperature that returned a remarkable accuracy of 98.76%. The error due to temperature dependence reduced from 22.4% to just 1.24%. The transient response time of the sensor was found to be ~2.4 s.
- 1 February 2020
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 226, 117610
A fluorescent lateral flow biosensor for the quantitative detection of Vaspin using upconverting nanoparticles
- 1 February 2020
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 226, 117610
A fluorescent lateral flow biosensor for the quantitative detection of Vaspin using upconverting nanoparticles