LRLutz Richter

Lutz Richter

*This is an algorithmically generated author record based on publicly available information.

Lutz Richter has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development and Optimal Probe Selection of an In Situ Penetration and Shear Apparatus for the Lunar Surface

    by Zihao Liu, Meng Zou, Yan Shen, Yuqi Zeng, Lutz Richter, Zhen Chen

    Precise in situ characterization of the mechanical properties of lunar regolith is critical for future lunar base construction and resource exploitation. However, existing detection methods predominantly rely on indirect inversion from rover wheel-soil interactions, which exhibit limitations in accuracy, real-time capability, and detection depth. Furthermore, specialized automated equipment capable of adapting to the complex lunar surface environment remains lacking. To address these challenges, this study presents the design and development of a novel autonomous in situ penetration-shear apparatus. The device automatically executes penetration and shear operations while recording real-time data, with a maximum penetration force of 25 N, shear torque of 2.5 N·m, penetration depth of 300 mm, and rotation angle of 360°. Given the maximum normal load constraint of 16 N imposed by the lunar rover platform, 24 probe configurations—varying in conicity, projected area, and vane number—were systematically evaluated using lunar soil simulants with three particle size distributions and two density levels. Multi-objective optimization was conducted to maximize detection efficiency, specifically penetration depth and shear torque, subject to a lightweight payload constraint (16 N). The multi-objective optimization reveals a fundamental trade-off: smaller conicity angles and projected areas favor deeper penetration, while larger projected areas enhance shear torque response. Under the 16 N constraint, the Pareto analysis identifies that a combination of moderate projected area, small conicity, and fewer vanes achieves the most balanced performance across all soil conditions. Results further demonstrate that increasing particle size and density substantially suppress both penetration capability and shear torque response, with compaction being the dominant factor limiting probe advancement under constrained normal loading. Results indicate that the optimal probe configuration comprises a 15° conicity, 324 mm2 projected area, and two vanes, achieving an average penetration depth of 51.61 mm and average shear torque of 0.06 N·m across all test conditions. This study validates a complete automated system for characterizing lunar soil mechanical properties and provides an efficient, reliable hardware solution for future unmanned lunar exploration missions through optimized probe design. These findings establish a solid technical foundation for deep, high-precision in situ investigation of lunar soil structure and mechanical parameters, with significant implications for lunar base site selection and In Situ Resource Utilization (ISRU).

  • Open Access

    An Analytical Modeling Framework for Martian Soil—Sampling Scoop Interaction with Numerical Validation

    by Hongtao Cao, Haoran Xie, Dong Pan, Yingchun Qi, Lutz Richter, Yan Shen, Meng Zou

    Accurate prediction of excavation forces is critical for the design reliability and operational safety of Mars surface sampling systems. This study establishes an analytical modeling framework to describe the excavation mechanics of Martian soil, focusing on the formation mechanism and evolution of resistance. Soil deformation and failure processes are qualitatively identified using particle image velocimetry (PIV) and discrete element method (DEM) simulations. Based on limit equilibrium theory, the passive earth pressure is derived, and the scoop is divided into seven force-bearing regions for three-dimensional force decomposition. The analytical model is validated against multibody dynamics–discrete element method (MBD–DEM) co-simulation. The results indicate that excavation resistance exhibits a distinct single-peak evolution, maximizing near the maximum excavation depth. Notably, the inner bottom surface and cutting edge dominate resistance during penetration, contributing approximately 56% and 30% of the total force, respectively. The resistance mechanism transitions after soil emergence due to the gravitational effect of retained soil. Consequently, this framework provides a physically interpretable and quantitatively validated approach for force prediction, offering theoretical support for sampling scoop design and optimization in future Mars missions.


  • Open Access

    The Terrain Testing Instrument (TTI) as a Selected Payload for the Chang'e 8 Lunar Landing Mission

    by Lutz Richter, Meng Zou, Bernard Foing

    This contribution describes the so-called Terrain Testing Instrument (TTI) which has recently been selected as an international payload for the planned Chinese Chang’e 8 lunar landing and roving mission targeting a high southern latitude landing site. The TTI will measure lunar regolith penetration resistance and shear strength, in a so-called vane-cone instrument that combines a cone penetrometer and a shear vane. A permittivity sensor using a novel patch electrode arrangement is integrated with the vane-cone and will allow to infer bulk density and ice content of the regolith, derived from measurement of the dielectric properties such as relative permittivity.In the initial phase of lunar surface exploration by the United States and the Soviet Union, dedicated instruments were designed and used to measure in situ some key physical properties of the regolith column in various locations. On the lunar landing and roving missions of the modern era however, no instruments have yet been flown for such purposes. It will however be particularly important to understand regolith stress-strain behavior in the South polar region as well as local volatiles contents, as extensive landing, roving, mining, and construction activities are foreseen there over the next several decades. A general assumption is that regolith in the South polar area would broadly resemble lunar highland regolith. But direct measurements will be indispensable ahead of crewed missions.Volatiles constitute an important resource while at the same time sublimation of ices from an icy regolith in response to loading and thermal dissipation from human-emplaced structures can lead to subsistence of the ground, thus constituting a hazard. The TTI will address these critical gaps in knowledge.The TTI is a slender penetrometer with a frontal shear vane for quasi-static regolith intrusion. A linear translation mechanism will drive it into the regolith while resistance vs. depth is recorded, followed by rotation of the shear vane to indicate shear resistance as a function of shear angle. Depth range of the TTI instrument is ~10…20 cm. It will be carried on a mobile rover and perform multiple measurement runs during the Chang’e 8 mission at various locations, thanks to the mobility of the carrying platform. The TTI overall mass is ~1.5 kg. The instrument is being developed by an international team of entities from Germany, the Netherlands, and China.

  • Open Access

    Enhancing Lunar Exploration: Drilling, Sensing, and Sampling Systems for In-Situ Regolith Subsurface Analysis and for Sample Return

    by Lutz Richter, Ranjan Prabhat, Kumar Dinesh, Shubhro Chakrabartty, Tze Ng

    We report on the development of two promising analysis and sampling tools for use on the Moon that promise to enhance science return in upcoming lunar missions and which would inform the search for potentially valuable resources that would be worthwhile exploiting. Building on the success of ISRO's Chandrayaan missions, our efforts aim at 1) creating an advanced drilling instrument with an integrated sensing unit, referred to as the “Moon Sensing Drill" (MSD), and 2) a “Soil and Pebble Sampler” (SPS). The MSD partially builds on concepts already studied in Europe under an “instrumented drill" heading whereas the SPS is entirely new. We are realizing the systems in collaboration between D Y Patil International University in Pune, India, and European entities.The MSD would be able to drill autonomously into lunar regolith and analyze the subsurface column in real-time, including detection of 3He, volatiles and key minerals. Moreover, temperature and thermal conductivity sensors would be part of the drill. The design is based primarily on a percussive drilling system, with the sensors incorporated inside the drill stem. The sensor data will be sent wirelesslessly to an electronics unit that integrates the information. This way, no rotary transmission of signal cables to and from sensors needs to be incorporated into the drill. Power transmission to the sensors is however via slip rings. The system can either be carried on a lunar rover or on lander Maximum drilling depth into the regolith is 20 cm. We are currently designing and building a demonstrator.The Soil Pebble Sampler (SPS) is a versatile tool designed to allow the collection and analysis of soil / regolith and pebble samples. In particular, the SPS is the first ever concept for uncrewed missions for controlled sampling of both soil and pebbles in a single tool. This will be key to future sample return missions to the Moon, such as Chandrayaan-4 in the ISRO space program.In the case of Drilling Mode, SPS employs a rotary drill equipped with radial blades and an external, thin-walled auger to drill into soil. With progressing depth, a longitudinal cavity (“tunnel") incorporated in the drill stem is filled with regolith. One of the SPS assemblies is the ball-end vibrating mechanism, which is able to shake particles loose from the drill and therefore keep debris from becoming lodged in the drill tip and the associated samples. Moreover, the vibrating mechanism is essential in shaking out the soil that would have been pressed into the sample tunnel.A stable 3-jaw gripping structure is at the end of the ball-end vibrating mechanism and uses that mechanism's sideways motion capability to pick up a pebble.

  • Open Access

    Development of a Lizard-Inspired Robot for Mars Surface Exploration

    by Guangming Chen, Long Qiao, Zhenwen Zhou, Lutz Richter, Aihong Ji

    Exploring Mars is beneficial to increasing our knowledge, understanding the possibility of ancient microbial life there, and discovering new resources beyond the Earth to prepare for future human missions to Mars. To assist ambitious uncrewed missions to Mars, specific types of planetary rovers have been developed for performing tasks on Mars’ surface. Due to the fact that the surface is composed of granular soils and rocks of various sizes, contemporary rovers can have difficulties in moving on soft soils and climbing over rocks. To overcome such difficulties, this research develops a quadruped creeping robot inspired by the locomotion characteristics of the desert lizard. This biomimetic robot features a flexible spine, which allows swinging movements during locomotion. The leg structure utilizes a four-linkage mechanism, which ensures a steady lifting motion. The foot consists of an active ankle and a round pad with four flexible toes that are effective in grasping soils and rocks. To determine robot motions, kinematic models relating to foot, leg, and spine are established. Moreover, the coordinated motions between the trunk spine and leg are numerically verified. In addition, the mobility on granular soils and rocky surface are experimentally demonstrated, which can imply that this biomimetic robot is suitable for Mars surface terrains.


  • Open Access

    Bending Study of Six Biological Models for Design of High Strength and Tough Structures

    by Guangming Chen, Tao Lin, Ce Guo, Lutz Richter, Ning Dai

    High strength and tough structures are beneficial to increasing engineering components service span. Nonetheless, improving structure strength and, simultaneously, toughness is difficult, since these two properties are generally mutually exclusive. Biological organisms exhibit both excellent strength and toughness. Using bionic structures from these biological organisms can be solutions for improving these properties of engineering components. To effectively apply biological models to design biomimetic structures, this paper analyses strengthening and toughening mechanisms of six fundamentally biological models obtained from biological organisms. Numerical models of three-point bending test are established to predict crack propagation behaviors of the six biological models. Furthermore, the strength and toughness of six biomimetic composites are experimentally evaluated. It is identified that the helical model possesses the highest toughness and satisfying strength. This work provides more detailed evidence for engineers to designate bionic models to the design of biomimetic composites with high strength and toughness.