Zhengpeng Yang

A coaxial integrated fiber-shaped self-powered CNT-PVA-GAT photoelectrochemical sensor with rapid ion/electron transport and superior methane adsorption and light absorption was constructed, featuring outstanding sensing performance toward methane.

Continuous-flow photoreactors hold great promise for the highly efficient photodegradation of pollutants due to their continuity and sustainability. However, how to enable a continuous-flow photoreactor with the combined features of high photodegradation efficiency and durability as well as broad-wavelength light absorption and large-scale processing remains a significant challenge. Herein, we demonstrate a facile and effective strategy to construct a sieve-like carbon nanotube (CNT)/TiO₂ nanowire film (SCTF) with superior flexibility (180° bending), high tensile strength (75–82 MPa), good surface wettability, essential light penetration and convenient visible light absorption. Significantly, the unique architecture, featuring abundant, well-ordered and uniform mesopores with ca. 70 µm in diameter, as well as a homogenous distribution of TiO₂ nanowires with an average diameter of ca. 500 nm, could act as a “waterway” for efficient solution infiltration through the SCTF, thereby, enabling the photocatalytic degradation of polluted water in a continuous-flow mode. The optimized SCTF-2.5 displayed favorable photocatalytic behavior with 96% degradation of rhodamine B (RhB) within 80 min and a rate constant of 0.0394 min⁻¹. The continuous-flow photodegradation device made using SCTF-2.5 featured exceptional photocatalytic behavior for the continuous degradation of RhB under simulated solar irradiation with a high degradation ratio (99.6%) and long-term stability (99.2% retention after working continuously for 72 h). This work sheds light on new strategies for designing and fabricating high-performance continuous-flow photoreactors toward future uses.

In order to acquire a tetracalcium phosphate/magnesium phosphate (TTCP/MPC) composite bone cement that combines the excellent bioactivity of TTCP and high mechanical strength of MPC, the cement was made and the compressive strength, phase composition of hardened cement, degradation in vitro, and tissue responses in vivo by implantation of TTCP/MPC in bone defect of rabbits were investigated. The results showed that TTCP/MPC was with a markedly better mechanical property than MPC. Moreover, compared with MPC, TTCP/MPC showed significantly delayed degradability in simulated body fluid. To investigate the in vivo biocompatibility and osteogenesis, the TTCP/MPC samples were implanted into bone defects in rabbits. Histological evaluation displayed that the introduction of TTCP into MPC enhanced the efficiency of new bone formation. TTCP/MPC also showed good biocompatibility, biodegradability and osteoconductivity with host bone in vivo. The results suggested that TTCP/MPC meets the basic requirements of bone tissue engineering, has an obvious clinical advantage over MPC and is promising to be applied in orthopedic, reconstructive and maxillofacial surgery.

Combining the surface modification and molecular imprinting technique, a novel piezoelectric sensing platform with excellent molecular recognition capability was established for the detection of uric acid (UA) based on the immobilization of TiO₂ nanoparticles onto quartz crystal microbalance (QCM) electrode and modification of molecularly imprinted TiO₂ (MIT) layer on TiO₂ nanoparticles. The performance of the fabricated biosensor was evaluated, and the results indicated that the biosensor exhibited high sensitivity in UA detection, with a linear range from 0.04 to 45 μM and a limit of detection of 0.01 μM. Moreover, the biosensor presented high selectivity towards UA in comparison with other interferents. The analytical application of the UA biosensor confirmed the feasibility of UA detection in urine sample.

Red mud/molecularly imprinted polypyrrole (RM/MIPPy) microparticles were successfully prepared via the surface modification and molecular imprinting technique. A novel piezoelectric sensing platform with excellent molecular recognition capability was established for the detection of bilirubin (BR) based on the immobilizationof RM/MIPPy microparticles onto quartz crystal microbalance (QCM) electrode. The performance of the fabricated biosensor was evaluated and the results indicated that the biosensor exhibited high sensitivity in BR detection, with a linear range from 0.01 to 120 μM and a limit of detection of 0.003 μM. Moreover, the biosensor presented outstandingselectivity towards BR in comparison to other interferents. The analytical application of the BR biosensor confirmed the feasibility of BR detection in serum sample.

Flexibility, stretchability, and flame retardancy are of ever increasing importance in constructing grouting materials. Herein, a simple and effective strategy to make organic-inorganic composite grouting material in a “flexible, stretchable, and flame retardant” way was based on the excellent synergistic interactions among polyurethane prepolymer, red mud, polyethylene glycol, and trimethylolpropane. The resultant polyurethane/red mud composite grouting material with three-dimensional network structure presented a favorable flexibility, desirable compressive strength of 29.2 MPa at 50% compression state, and a good elongation at 15.1%. The grouting material was mainly composed of amorphous polyurethane and crystalline red mud, and its probable formation mechanism was reaction of prepolymer with H₂O, polyethylene glycol and trimethylolpropane under vigorous stirring in the presence of catalyst. Furthermore, the grouting material possessed favorable thermal stability, flame retardancy and repairment performance for roadway cracks. This work may open a simple and convenient avenue for the massive engineering application of red mud and preparation of flexible organic-inorganic hybrid grouting material.