RSRezig Sana

Rezig Sana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rezig Sana has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of alkali treatment on physical and mechanical properties of Cattail and Kenaf fibres

    by Rezig Sana, BEN Mlik Yosr, Jaouadi Mounir, Khoffi Foued, Msahli Slah

    NaOH treatment is widely used for natural fibre extraction. However, the different treatment conditions produce fibres with other characteristics. The present work aims to study the effect of alkali treatment conditions on Kenaf bast and Cattail stem fibres’ properties. Two conditions at two different levels were selected. They are soaking time (2 and 4 hours) and alkali treatment temperature (80 and 120°C). Untreated Kenaf and Cattail fibres were used as control samples. The NaOH process occurred due to the decline in the fineness of Cattail and Kenaf fibres. SEM micrographs of treated fibres showed a clear surface with rectangular pits for Cattail fibres and dissociation of the technical fibre. Best tensile strength obtained for Kenaf fibres for 80°C and under 4 hours. However, a temperature of 120°C and a duration of 4 hours confirmed the best results in terms of lignin removal, proved by IR spectra. Also, X-ray diffractograms suggested that the crystallinity index increases with the highest conditions. The properties of Kenaf bast fibres are found to be superior to Cattail fibres. Characteristic ranges of Cattail and Kenaf fibres after alkaline treatment can be resumed respectively as the diameter of (205–496) and (66–162 μm), the linear density of (31–48) and (14–22 tex), tenacity of (6–8) and (13–17 cN/tex), elongation of (2.6–3.3) and (3–6.2%), lignin ratio of (20.7–23.7) and (15.13–22.6%), alpha-cellulose of (50.2–55.6) and (53–59%), and crystallinity of (43.9–58.6) and (55.4–66.3%). Findings showed that Kenaf bast fibres are found to be great resistant and thinner than Cattail fibres and compared to other fibres.


  • Open Access

    Optimization and Characterization of Combined Degumming Process of Typha angustata L. Stem Fibers

    by Sana Rezig, Foued Khoffi, Mounir Jaouadi, Asma Eloudiani, Slah Msahli

    Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers. Researchers over the years have explored many plant fibers using different extraction processes to study their physical, chemical, and mechanical properties. In this context, the present study relates to the extraction, characterization, and optimization of Typha angustata L. stem fibers. For this purpose, desirability functions and response surface methodology were applied to simultaneously optimize the diameter (D), linear density (LD); yield (Y), lignin fraction (L), and tenacity (T) of Typha stem fibers. Typha stems have been subjected to both alkali (NaOH) and enzymatic (pectinex ultra-SPL) treatments. Three levels of process variables including enzyme concentration (10, 15, and 20 ml/L) and treatment duration (10, 15, and 20 days) were used to design the experiments according to the factorial design. Experimental results were examined by analysis of variance and fitted to second order polynomial model using multiple regression analysis. The Derringer’s desirability function released that the values of process variables generating optimized diameter, linear density, yield, lignin ratio and tenacity are 20 ml/L and 20 days for concentration of pectinex ultra-SPL enzyme and treatment duration, respectively. Confirmation was performed and high degree of correlation was found between the experimental and statistical values. Moreover, the morphological structure has been investigated by the scanning electron microscope, showing a crenelated structure of ultimate fiber bundles of cellulose composing the Typha fiber. Compared to Typha stem non-treated fibers (TSNTF), Typha stem combined treated fibers (TSCTF), brings to improve mechanical properties. This change in mechanical properties is affected by modifying the fiber structure showing alpha cellulose of (66.86%) and lignin ratio of (10.83%) with a crystallinity index of (58.47%).


  • Effect of Alkali-Treatment on Physico-Chemical Properties of Typha Angustata Stem Fiber and Its Composites

    by Rezig Sana, Jaouadi Mounir, Khoffi Foued, El Oudiani Asma, Msahli Slah, Durand Bernard

    Recognizing the importance of using plant fibers in polymeric composites and the no availability of data on fine structure, physico-chemical, morphological and others properties of Typha Angustata stem fibers, a study was undertaken with the objective of determining some of these properties. In this work, untreated and treated Typha stem fibers by NaOH treatment have been extracted and characterized to evaluate and compare their surface condition as well as their chemical composition, their fine structure and their mechanical properties. Typha stem treated fibers (TSTFs) have presented best results with an alpha-cellulose content of 51.3%, a density of 1460 kg/m3, an average tensile strength equal to 9.42cN/tex and a diameter of 208.12 µm. Also, Crystallinity Index (CI) of TSTFs was 57.4%. Unsaturated polyester matrix was reinforced with TSTFs and mechanical properties were undergone. Results show that TSTFs could be used for sustainable fiber-reinforced polymer composites with an enhancement in flexural and tensile tests for 12.6% TSTFs ratio.


  • Typha fiber reinforced polyester composites: tensile properties and statistical analysis

    by Sana Rezig, Mounir Jaouadi, Foued Khoffi, Slah Msahli, Bernard Durand

    This article presents the study of the tensile characteristics of the Typha fiber reinforced polyester composites. Composites have been developed by hand lay-up technique with different Typha fibers treated conditions (sea water, alkali and combined treatment), different volume fraction and reinforcement origin (Leaf or Stem fibers) and structure (mixture of fibers or nonwoven structure). The experimental results indicated an improvement in tensile strength with increasing fiber content. Thus, a maximum tensile strength was observed and was equal to 24.58 and 25.07 MPa, respectively, for a fiber content of 12.6% of the leaf fibers and 10.3% of the typha stalk fibers. Mercerization has successfully modified the structure of fibers and improved the performance of Typha fiber composites by promoting better fiber to resin bonding. Statistical analysis shows that the optimum solution was obtained by using a bulk structure having a rate of 12.6% for the extracted fibers from the chemically treated stems.


  • Flexural properties of typha natural fiber-reinforced polyester composites

    by Rezig Sana, Khoffi Foued, Ben Mlik Yosser, Jaouadi Mounir, Msahli Slah, Durand Bernard