John W. G. Tisch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
John W. G. Tisch has a total of 69 co-authors. Here are the top co-authors by number of shared publications:
J. P. Marangos
Blackett Laboratory, Imperial College, London SW7 2AZ, UK
7 shared publications- Tobias Witting
Max-Born-Institut (MBI), Berlin, Germany
3 shared publications C. A. Haworth
Blackett Laboratory , Imperial College London , Prince Consort Road, South Kensington, London SW7 2BZ, UK
2 shared publicationsDavide Fabris
Blackett Laboratory, Imperial College London, London SW7 2AZ, UK
2 shared publications- Francisco Silva
IFIMUP-IN e Departamento de Física e Astronomia, Faculdade de Ciências, Universidade do Porto, 4169-007 Porto, Portugal
2 shared publications - Luke E. Chipperfield
Imperial College London, United Kingdom
2 shared publications
Latest Publications
- Open Access
- 19 November 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 384
Fast ultraviolet-C photonics: generating and sensing laser pulses on femtosecond timescales
Photonic devices operating in the ultraviolet UV-C range (100–280 nm) have diverse applications from super-resolution microscopy to optical communications, and their advances promise to unlock new opportunities across science and technology. However, generating and detecting ultrafast light signals in this spectral range remains a major challenge. Here, we report an integrated UV-C source-sensor platform that combines phase-matched second-order processes in nonlinear optical crystals for the efficient generation of femtosecond UV-C laser pulses with a new class of room temperature photodetectors based on two-dimensional (2D) semiconductors. Unexpectedly, these 2D sensors exhibit a linear to super-linear photocurrent response to pulse energy, a highly desirable property, laying the foundation for UV-C-based photonics operating on femtosecond timescales over a wide range of pulse energies and repetition rates. As proof of concept, we demonstrate a free-space communication system.
- 19 November 2025
- Published by Springer Nature in Light: Science & Applications
- Vol. 14 (1) , 384
Open AccessFast ultraviolet-C photonics: generating and sensing laser pulses on femtosecond timescales
Photonic devices operating in the ultraviolet UV-C range (100–280 nm) have diverse applications from super-resolution microscopy to optical communications, and their advances promise to unlock new opportunities across science and technology. However, generating and detecting ultrafast light signals in this spectral range remains a major challenge. Here, we report an integrated UV-C source-sensor platform that combines phase-matched second-order processes in nonlinear optical crystals for the efficient generation of femtosecond UV-C laser pulses with a new class of room temperature photodetectors based on two-dimensional (2D) semiconductors. Unexpectedly, these 2D sensors exhibit a linear to super-linear photocurrent response to pulse energy, a highly desirable property, laying the foundation for UV-C-based photonics operating on femtosecond timescales over a wide range of pulse energies and repetition rates. As proof of concept, we demonstrate a free-space communication system.
- Open Access
- 29 August 2023
- Published by IOP Publishing in New Journal of Physics
- Vol. 25 (9) , 093024
Rapid retrieval of femtosecond and attosecond pulses from streaking traces using convolutional neural networks
Attosecond streaking is a powerful and versatile technique that allows the full-field characterisation of femtosecond to attosecond optical pulses. It has been instrumental in the verification of attosecond pulse generation and probing of ultrafast dynamics in matter. Recently, machine learning (ML) has been applied to retrieve the fields from streaking data (White and Chang 2019 Opt. Express 27 4799; Zhu et al 2020 Sci. Rep. 10 5782; Brunner et al 2022 Opt. Express 30 15669–84). This offers a number of advantages compared with traditional iterative algorithms, including faster processing and better resilience to noise. Here, we implement a ML approach based on convolutional neural networks and limit the search to physically realistic pulses that can be specified with a small number of parameters. This leads to substantial reductions in both training and retrieval times, enabling near kHz retrieval rates. We examine how the retrieval performance is affected by noise, and for the first time in this context, study the effect of missing data. We show that satisfactory retrievals are still possible with signal to noise ratios as low as 10, and with up to 40 % of data missing.
- 29 August 2023
- Published by IOP Publishing in New Journal of Physics
- Vol. 25 (9) , 093024
Open AccessRapid retrieval of femtosecond and attosecond pulses from streaking traces using convolutional neural networks
Attosecond streaking is a powerful and versatile technique that allows the full-field characterisation of femtosecond to attosecond optical pulses. It has been instrumental in the verification of attosecond pulse generation and probing of ultrafast dynamics in matter. Recently, machine learning (ML) has been applied to retrieve the fields from streaking data (White and Chang 2019 Opt. Express 27 4799; Zhu et al 2020 Sci. Rep. 10 5782; Brunner et al 2022 Opt. Express 30 15669–84). This offers a number of advantages compared with traditional iterative algorithms, including faster processing and better resilience to noise. Here, we implement a ML approach based on convolutional neural networks and limit the search to physically realistic pulses that can be specified with a small number of parameters. This leads to substantial reductions in both training and retrieval times, enabling near kHz retrieval rates. We examine how the retrieval performance is affected by noise, and for the first time in this context, study the effect of missing data. We show that satisfactory retrievals are still possible with signal to noise ratios as low as 10, and with up to 40 % of data missing.
- Open Access
- 18 March 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (7) , 9394-9402
Investigation of valence band reconstruction methods for attosecond streaking data from surfaces
We analyze simulated streaked valence band photoemission with atomic streaking theory-based reconstruction methods to investigate the differences between atomic gas-phase streaking and valence band surface streaking. The careful distinction between atomic and surface streaking is a prerequisite to justify the application of atomic streaking theory-based reconstruction methods to surface streaking measurements. We show that neglecting the band structure underestimates the width of reconstructed photoelectron wavepackets, consistent with the Fourier transform limit of the band spectrum. We find that a fit of Gaussian wavepackets within the description of atomic streaking is adequate to a limited extent. Systematic errors that depend on the near-infrared skin depth, an inherently surface-specific property, are present in temporal widths of wavepackets reconstructed with atomic streaking theory-based methods.
- 18 March 2019
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (7) , 9394-9402
Open AccessInvestigation of valence band reconstruction methods for attosecond streaking data from surfaces
We analyze simulated streaked valence band photoemission with atomic streaking theory-based reconstruction methods to investigate the differences between atomic gas-phase streaking and valence band surface streaking. The careful distinction between atomic and surface streaking is a prerequisite to justify the application of atomic streaking theory-based reconstruction methods to surface streaking measurements. We show that neglecting the band structure underestimates the width of reconstructed photoelectron wavepackets, consistent with the Fourier transform limit of the band spectrum. We find that a fit of Gaussian wavepackets within the description of atomic streaking is adequate to a limited extent. Systematic errors that depend on the near-infrared skin depth, an inherently surface-specific property, are present in temporal widths of wavepackets reconstructed with atomic streaking theory-based methods.
- Open Access
- 23 November 2017
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 65 (5-6) , 737-744
Enhanced attosecond pulse generation in the vacuum ultraviolet using a two-colour driving field for high harmonic generation
High-harmonic radiation in the extreme ultraviolet and soft X-ray spectral regions can be used to generate attosecond pulses and to obtain structural and dynamic information in atoms and molecules. However, these sources typically suffer from a limited photon flux. An additional issue at lower photon energies is the appearance of satellites in the time domain, stemming from insufficient temporal gating and the spectral filtering required for the isolation of attosecond pulses. Such satellites limit the temporal resolution. The use of multi-colour driving fields has been proven to enhance the harmonic yield and provide additional control, using the relative delays between the different spectral components for waveform shaping. We describe here a two-colour high-harmonic source that combines a few-cycle near-infrared pulse with a multi-cycle second harmonic pulse, with both relative phase and carrier-envelope phase stabilization. We observe strong modulations in the harmonic flux, and present simulations and experimental results supporting the suppression of satellites in sub-femtosecond pulses at 20 eV compared to the single colour field case, an important requirement for attosecond pump-probe measurements.
- 23 November 2017
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 65 (5-6) , 737-744
Open AccessEnhanced attosecond pulse generation in the vacuum ultraviolet using a two-colour driving field for high harmonic generation
High-harmonic radiation in the extreme ultraviolet and soft X-ray spectral regions can be used to generate attosecond pulses and to obtain structural and dynamic information in atoms and molecules. However, these sources typically suffer from a limited photon flux. An additional issue at lower photon energies is the appearance of satellites in the time domain, stemming from insufficient temporal gating and the spectral filtering required for the isolation of attosecond pulses. Such satellites limit the temporal resolution. The use of multi-colour driving fields has been proven to enhance the harmonic yield and provide additional control, using the relative delays between the different spectral components for waveform shaping. We describe here a two-colour high-harmonic source that combines a few-cycle near-infrared pulse with a multi-cycle second harmonic pulse, with both relative phase and carrier-envelope phase stabilization. We observe strong modulations in the harmonic flux, and present simulations and experimental results supporting the suppression of satellites in sub-femtosecond pulses at 20 eV compared to the single colour field case, an important requirement for attosecond pump-probe measurements.
- Open Access
- 17 March 2016
- Published by Optica Publishing Group in Optica
- Vol. 3 (3) , 303-310
Attosecond sampling of arbitrary optical waveforms
Advances in the generation of ultrashort laser pulses, and the emergence of new research areas such as attosecond science, nanoplasmonics, coherent control, and multidimensional spectroscopy, have led to the need for a new class of ultrafast metrology that can measure the electric field of complex optical waveforms spanning the ultraviolet to the infrared. Important examples of such waveforms are those produced by spectral control of ultrabroad bandwidth pulses, or by Fourier synthesis. These are typically tailored for specific purposes, such as to increase the photon energy and flux of high-harmonic radiation, or to control dynamical processes by steering electron dynamics on subcycle time scales. These applications demand a knowledge of the full temporal evolution of the field. Conventional pulse measurement techniques that provide estimates of the relative temporal or spectral phase are unsuited to measure such waveforms. Here we experimentally demonstrate a new, all-optical method for directly measuring the electric field of arbitrary ultrafast optical waveforms. Our method is based on high-harmonic generation (HHG) driven by a field that is the collinear superposition of the waveform to be measured with a stronger probe laser pulse. As the delay between the pulses is varied, we show that the field of the unknown waveform is mapped to energy shifts in the high-harmonic spectrum, allowing a direct, accurate, and rapid retrieval of the electric field with subcycle temporal resolution at the location of the HHG.
- 17 March 2016
- Published by Optica Publishing Group in Optica
- Vol. 3 (3) , 303-310
Open AccessAttosecond sampling of arbitrary optical waveforms
Advances in the generation of ultrashort laser pulses, and the emergence of new research areas such as attosecond science, nanoplasmonics, coherent control, and multidimensional spectroscopy, have led to the need for a new class of ultrafast metrology that can measure the electric field of complex optical waveforms spanning the ultraviolet to the infrared. Important examples of such waveforms are those produced by spectral control of ultrabroad bandwidth pulses, or by Fourier synthesis. These are typically tailored for specific purposes, such as to increase the photon energy and flux of high-harmonic radiation, or to control dynamical processes by steering electron dynamics on subcycle time scales. These applications demand a knowledge of the full temporal evolution of the field. Conventional pulse measurement techniques that provide estimates of the relative temporal or spectral phase are unsuited to measure such waveforms. Here we experimentally demonstrate a new, all-optical method for directly measuring the electric field of arbitrary ultrafast optical waveforms. Our method is based on high-harmonic generation (HHG) driven by a field that is the collinear superposition of the waveform to be measured with a stronger probe laser pulse. As the delay between the pulses is varied, we show that the field of the unknown waveform is mapped to energy shifts in the high-harmonic spectrum, allowing a direct, accurate, and rapid retrieval of the electric field with subcycle temporal resolution at the location of the HHG.
- Open Access
- 11 December 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (25) , 32803-32808
Single-shot implementation of dispersion-scan for the characterization of ultrashort laser pulses
We demonstrate a single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than translating wedges to vary the dispersion as in scanning d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectrometer is used to measure the two-dimensional trace, which is analyzed using the d-scan retrieval algorithm. We compare the single-shot implementation with the scanning d-scan for the measurement of sub-3.5-fs pulses from a hollow core fiber pulse compressor. We show that the retrieval algorithm used to extract amplitude and phase of the pulse provides comparable results, proving the validity of the new single-shot implementation in the near single-cycle regime.
- 11 December 2015
- Published by Optica Publishing Group in Optics Express
- Vol. 23 (25) , 32803-32808
Open AccessSingle-shot implementation of dispersion-scan for the characterization of ultrashort laser pulses
We demonstrate a single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than translating wedges to vary the dispersion as in scanning d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectrometer is used to measure the two-dimensional trace, which is analyzed using the d-scan retrieval algorithm. We compare the single-shot implementation with the scanning d-scan for the measurement of sub-3.5-fs pulses from a hollow core fiber pulse compressor. We show that the retrieval algorithm used to extract amplitude and phase of the pulse provides comparable results, proving the validity of the new single-shot implementation in the near single-cycle regime.
- Open Access
Single-shot implementation of dispersion-scan for the characterization of ultrashort laser pulses
We demonstrate a novel, single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than scanning wedges to vary the dispersion as in standard d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a Littrow prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectrometer is used to measure the two-dimensional trace, which is analyzed using the d-scan retrieval algorithm. We compare the single-shot implementation with the standard d-scan for the measurement of sub-3.5-fs pulses from a hollow core fiber pulse compressor. We show that the retrieval algorithm used to extract amplitude and phase of the pulse provides comparable results, proving the validity of the new single-shot implementation down to near single-cycle durations.
Open AccessSingle-shot implementation of dispersion-scan for the characterization of ultrashort laser pulses
We demonstrate a novel, single-shot ultrafast diagnostic, based on the dispersion-scan (d-scan) technique. In this implementation, rather than scanning wedges to vary the dispersion as in standard d-scan, the pulse to be measured experiences a spatially varying amount of dispersion in a Littrow prism. The resulting beam is then imaged into a second-harmonic generation crystal and an imaging spectrometer is used to measure the two-dimensional trace, which is analyzed using the d-scan retrieval algorithm. We compare the single-shot implementation with the standard d-scan for the measurement of sub-3.5-fs pulses from a hollow core fiber pulse compressor. We show that the retrieval algorithm used to extract amplitude and phase of the pulse provides comparable results, proving the validity of the new single-shot implementation down to near single-cycle durations.
- Open Access
- 13 March 2013
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 41, 01017
Toward a “Perfect-Wave” HHG Driving With a Multicolor OPA
EPJ Web of Conferences, open-access proceedings in physics and related sciences
- 13 March 2013
- Published by EDP Sciences in EPJ Web of Conferences
- Vol. 41, 01017
Open AccessToward a “Perfect-Wave” HHG Driving With a Multicolor OPA
EPJ Web of Conferences, open-access proceedings in physics and related sciences
- 26 January 2012
- Published by American Physical Society (APS) in Physical Review A
- Vol. 85 (1) , 015807
Enhanced high-order-harmonic generation in a carbon ablation plume
We report on the observation of enhanced high harmonics from a carbon plasma using sub-5-fs laser pulses. The efficiency of harmonic generation in the range of 14–25 eV was up to five times higher in the case of a plasma medium (graphite ablation) compared with gas (argon) under similar experimental conditions. The harmonic enhancement can be attributed to the presence of carbon nanoparticles in the ablation plumes.
- 26 January 2012
- Published by American Physical Society (APS) in Physical Review A
- Vol. 85 (1) , 015807
Enhanced high-order-harmonic generation in a carbon ablation plume
We report on the observation of enhanced high harmonics from a carbon plasma using sub-5-fs laser pulses. The efficiency of harmonic generation in the range of 14–25 eV was up to five times higher in the case of a plasma medium (graphite ablation) compared with gas (argon) under similar experimental conditions. The harmonic enhancement can be attributed to the presence of carbon nanoparticles in the ablation plumes.
- 10 May 2007
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 54 (7) , 1011-1017
Probing fast nuclear wavepackets in light molecules: monitoring structural rearrangement on an attosecond timescale
A new technique for probing the structural rearrangements of molecules following ionization has recently been demonstrated. Whilst straightforward to implement, this technique offers remarkable time resolution, allowing intramolecular nuclear dynamics to be followed with a precision of 100 as. Here we discuss this technique, termed PACER (probing attosecond dynamics by chirp encoded recollision), examine the processes that affect the measurement, and compare the technique to alternative methods for probing vibrational wavepackets in light molecules.
- 10 May 2007
- Published by Taylor & Francis in Journal of Modern Optics
- Vol. 54 (7) , 1011-1017
Probing fast nuclear wavepackets in light molecules: monitoring structural rearrangement on an attosecond timescale
A new technique for probing the structural rearrangements of molecules following ionization has recently been demonstrated. Whilst straightforward to implement, this technique offers remarkable time resolution, allowing intramolecular nuclear dynamics to be followed with a precision of 100 as. Here we discuss this technique, termed PACER (probing attosecond dynamics by chirp encoded recollision), examine the processes that affect the measurement, and compare the technique to alternative methods for probing vibrational wavepackets in light molecules.