JZJiangbo Zhang

Jiangbo Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiangbo Zhang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design, Manufacturing, and Testing of Single-Carbon-Nanotube-Based Infrared Sensors

    by Jiangbo Zhang, Ning Xi, Hongzhi Chen, King Wai Chiu Lai, Guangyong Li, Uchechukwu C. Wejinya

    As a 1-D nanostructural material, carbon nanotube (CNT) has attracted lot of attention and has been used to build various nanoelectronic devices due to its unique electronic properties. In this paper, a reliable and efficient nanomanufacturing process was developed for building single-CNT-based nanodevices by depositing the CNTs on the substrate surface and then aligning them to bridge the electrode gap using the atomic force microscopy (AFM) based nanomanipulation. With this technology, single CNT-based IR sensors have been fabricated for investigating CNT's electronic and photonic properties. The fabrication of single-CNT-based IR sensors demonstrated the reliability and efficiency of the nanomanufacturing process. Experimental tests on single-multiwalled-CNT-based IR sensors have shown much larger photocurrent and quantum efficiency than other reported studies. It has also been shown that a high signal to dark current ratio can be accomplished by single-walled-CNT (SWNT) based IR sensors. Moreover, the testing of SWNT-bundle-based IR sensors verified that the performance of CNT bundle/film-based nanoelectronic devices was limited by the mixing of semiconducting CNTs and metallic CNTs, as well as the unstable CNT-CNT junctions in a CNT bundle or network.


  • Sensor Referenced Real-Time Videolization of Atomic Force Microscopy for Nanomanipulations

    by Lianqing Liu, Yilun Luo, Ning Xi, Yuechao Wang, Jiangbo Zhang, Guangyong Li

    The main problem of atomic force microscopy (AFM)-based nanomanipulation is the lack of real-time visual feedback. Although this problem has been partially solved by virtual reality technology, the faulty display caused by random drift and modeling errors in the virtual reality interface are still limiting the efficiency of the AFM-based nanomanipulation. Random drift aroused from an uncontrolled manipulation environment generates a position error between the manipulation coordinate and the true environment. Modeling errors due to the uncertainties of the nanoenvironment often result in displaying a wrong position of the object. Since there is no feedback to check the validity of the display, the faulty display cannot be detected in real time and leads to a failed manipulation. In this paper, a real-time fault detection and correction (RFDC) method is proposed to solve these problems by using the AFM tip as an end effector as well as a force sensor during manipulation. Based on the interaction force measured from the AFM tip, the validity of the visual feedback is monitored in real time by the developed Kalman filter. Once the faulty display is detected, it can be corrected online through a quick local scan without interrupting manipulation. In this way, the visual feedback keeps consistent with the true environment changes during manipulation, which makes it possible for several operations to finish without an image scan in between. The theoretical study and the implementation of the RFDC method are elaborated. Experiments of manipulating nanomaterials including nanoparticles and nanorods have been carried out to demonstrate its effectiveness and efficiency.


  • Nanorobot assembly of carbon nanotubes for mid-IR sensor

    by Ning Xi, Jiangbo Zhang, Harold Szu, Guangyong Li

    Carbon nanotubes (CNTs) have a potential to be efficient infrared (IR) detection material due to their unique electronic properties. As a one-dimensional nano-structural material, the ballistic electronic transport property makes the noise equivalent temperature difference smaller compared with other semi-conducting materials. In order to verify this unique property, a single pixel CNT-based infrared photodetector is fabricated by depositing the CNTs on the substrate surface and then aligning them to bridge the electrode gap using the atomic force microscopy (AFM)-based nano-robotic system. The photon-generated electron-hole pairs within the carbon nanotube are separated by an external electric field between the two electrodes. The separated carriers contribute to the current flowing through the carbon nanotube and form the photocurrent. By monitoring the photocurrent, the incident infrared can be detected and quantified. Experimental results show the good sensitivity of CNTs to the infrared light.

  • Fabrication and Experimental Testing of Individual Multi-walled Carbon Nanotube (CNT) based Infrared Sensors

    by Jiangbo Zhang, Ning Xi, Hongzhi Chen, King Wai Chiu Lai

    Carbon nanotubes (CNTs) have a potential to be efficient infrared (IR) detection materials due to their unique electronic properties. Since carbon nanotube films lose special properties of CNTs and increase noises, a single CNT is preferred for building infrared sensors. Although some experimental progress toward individual single-walled carbon nanotube (SWNT) based IR sensor has been reported, several difficulties hindered the further development of individual CNT based IR sensors. Firstly, there is no a reliable and efficient way to reproducibly fabricate individual CNT based sensors up to now. In this paper, an automated dielectrophoresis deposition system is used to deposit CNTs around the electrodes, and then an Atomic Force Microscopy based nanomanipulation system is used to position an individual CNT onto the electrodes. Since this process is controllable and reliable, it becomes possible to fabricate an individual CNT based sensor array, which is difficult to make with other fabrication method. Secondly, since it is very difficult to control the diameter of the SWNTs during production process, it is difficult to get a SWNT based infrared sensor with expected bandgap. To solve this problem, the electronic breakdown technique is used to tune the semiconducting properties of a single multi-walled carbon nanotube (MWNT). The diameter of a single MWNT can be modified by electrical breakdown of outer layer of nanotube walls. Thirdly, SWNT has a low quantum efficiency (~ 0.02-0.1) due to its thin diameter and short absorption depth. In this paper, a single MWNT based infrared sensor is fabricated and tested. It shows a higher quantum efficiency (~ 0.3) than the SWNT based infrared sensors.


  • The Infinite Dimensional Control of Flexible Cantilevers in AFM Based Nanomanipulation

    by Lina Hao, Jiangbo Zhang, Ning Xi

    Atomic force microscopy (AFM) has been extensively used and AFM based nanomanipulation has also been studied for many years. But efficiency and accuracy of AFM based nanomanipulation are still major issues. In order to accurately control the tip position, which is important to prevent the tip from missing the objects, the deformation of cantilever has to be compensated or eliminated during manipulation. An active AFM probe is used to eliminate the deformation of cantilever by directly controlling the cantilever's flexibility or rigidity during manipulation. In this paper, the active probe is modeled as an infinite dimensional system based on Euler-Bernoulli theory. A periodic-output-feedback (POF) controller is designed and simulations are carried out to optimize the parameters of the controller. The POF controller is implemented in a real time Linux system. Experimental results demonstrated the validity of infinite dimensional model and POF controller. Experimental results on nanomanipulation have also shown that the control accuracy of tip position is improved by using this controller of active probe.

  • Atomic Force Microscopy Sensing Using Multiple Modes

    by Jiangbo Zhang, Ning Xi, Guangyong Li, Chanmin Su

    An atomic force microscope (AFM) explores the topography of a sample surface using a micro-sized flexible cantilever, which works as a flexible robot arm. The flexible cantilever is controlled to keep vibrating when an AFM works in the tapping mode. The cantilever is modeled as a flexible beam instead of a point mass system in this paper. The nonlinear interaction force between the tip and sample surface is also modeled. A simulation environment is developed to analyze the dynamics of cantilevers using the flexible beam model. Simulation results confirm that the flexible beam model can represent the system more accurately than the point-mass model. It has been shown that lower modes are more sensitive to changes of surface topography or surface materials when the cantilever is driven to vibrate at a higher harmonic mode. At the same time, this simulation environment also provides a more accurate way to validate the design of a new AFM probe and AFM controller than simulation packages which use the point-mass model


  • Single carbon nanotube based infrared sensor

    by Jiangbo Zhang, Ning Xi, Hoyin Chan, Guangyong Li

    As a one-dimensional nanostructural material, carbon nanotube (CNT) has been used to build different nanoelectronic devices due to its unique electrical properties. In this paper, the infrared (IR) responses of individual single-wall carbon nanotube (SWNT) and SWNT film are studied. A single-wall carbon nanotube is assembled onto a pair of electrodes to form Schottky contacts. The photongenerated electron-hole pairs within the carbon nanotube are seperated by an external electric field between the two electrodes. The separated carriers contribute to the current flowing through the carbon nanotube and form photocurrent. By monitoring the photocurrent, the incident infrared can be detected and quantitated. The single-wall carbon nanotube based infrared sensor is designed and a series of efficient and reliable fabrication and assembly processes are developed for the sensor fabrication. With an atomic force microscope based nanomanipulation system as the assembly tool, a single carbon nanotube can be easily assembled onto the electrodes. Since the assembly process is controllable and reliable, it becomes possible to fabricate an individual carbon nanotubes based infrared sensor array, which was difficult to fabricate with other fabrication method. The photocurrent responses of individual SWNT IR sensor and SWNT film IR sensor are measured and analyzed. Experimental results show the good sensitivity of SWNTs to the infrared light. Our results shows a three orders higher photocurrent than the previous reported results. It has also been shown that an individual SWNT IR sensor is more sensitive than a SWNT film IR sensor.


  • Modeling and Control of Active End Effector for the AFM Based Nano Robotic Manipulators

    by Jiangbo Zhang, Guangyong Li, Ning Xi

    Nanomanipulation using Atomic Force Microscope (AFM) has been extensively investigated for many years. However, control of tip position during nanomanipulation is still a major issue because of the deformation of the cantilever caused by manipulation force. The softness of the conventional cantilevers also cause the failure of the manipulation of relatively large and sticky nano-object because the tip can easily slip over the nano-object. In this paper, an active atomic force microscopy probe is used to solve these problems by changing the cantilever’s flexibility or rigidity through different control strategies in imaging and manipulation modes respectively. During imaging mode, the active probe is controlled to bend up with respect to the interaction force between the tip and samples, thus making the tip response faster and increase the imaging speed. During manipulation mode, the active probe is controlled to bend down with respect to the interaction force between tip and the samples; thus increasing its nominal rigidity to avoid tip slipping over object. A detailed model of the active probe is presented in this paper and the controller designed based on the proposed active probe model is also implemented on the augmented reality system, which is an AFM based nanomanipulation system with both real-time visual and haptic feedback. The simulation results for the control strategies and the preliminary experimental results for the AFM based nanmomanipulation verified the validity of the model and effectiveness of the controller.


  • Single Carbon Nanotube Based Ion Sensor for Gas Detection

    by Jiangbo Zhang, Ning Xi, Hoyin Chan, Guangyong Li

    This paper presents a new method for carbon nanotube based gas sensing. Instead of sensing the gas directly, the gas molecules are first ionized and then the ionized molecules are sensed by the single carbon nanotube based ion sensor. The adsorption of ionized gas molecule on the carbon nanotube surface introduces electrons into the material and consequently changes the current of the sensor. Once the electron of an ionized gas molecule is desorbed and transported to the electrode, the gas molecule is released from the carbon nanotube and another ionized gas molecule is adsorbed onto the carbon nanotbue surface. In this way, the response of the sensor is much faster than the traditional carbon nanotube based gas sensors which directly sense the gas molecules. A single carbon nanotube based ion sensor is fabricated and assembled to verify this theory. The electrical behavior of a single multiwall carbon nanotube is measured and analyzed. Experimental results show the responses of the ion sensor to oxygen ions. It is shown that the sensor exhibits a reversible response with a recovery time of couple seconds, which is much less than the traditional gas sensors' recovery time of several minutes to couple hours.