SGStanislava Gašpercová

Stanislava Gašpercová

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stanislava Gašpercová has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The impact of radiant heat on various types of plasterboard walls

    by Stanislava Gašpercová, Linda Makovická Osvaldová, Erik Richnavský

    The future of the whole world focuses on reducing waste produced by people. As the construction sector is one of the biggest producers of waste, a great deal of effort has been made to introduce this trend in modern construction. The “green” building sector, therefore, draws attention to natural and recyclable building materials. These include natural thermal insulation such as cork, fiberboard, hemp insulation, and even sheep wool insulation. Almost all types of such insulation are made from waste materials which, were they not reused in the form of thermal insulation, would end up as municipal or biodegradable waste. At the same time, we should point out that almost all “green” construction materials are flammable. This feature is not very advantageous from the point of view of fire protection and it can significantly affect the fire safety of a construction. It is for this reason that the main objective of this research was to determine the impact of a radiant heat source on various types of thermal insulation used as plasterboard filling and to evaluate the possibilities of their use in sandwich constructions for fire protection purposes.

  • Open Access

    Evaluation of Marblewood Dust’s (Marmaroxylon racemosum) Effect on Ignition Risk

    by Miroslava Vandličkova, Iveta Markova, Katarina Holla, Stanislava Gašpercová

    The paper deals with the selected characteristics, such as moisture, average bulk density, and fraction size, of tropical marblewood dust (Marmaroxylon racemosum) that influence its ignition risk. Research was focused on sieve analysis, granulometric analysis, measurement of moisture level in the dust, and determination of the minimum ignition temperatures of airborne tropical dust and dust layers. Samples were prepared using a Makita 9556CR 1400W grinder and K36 sandpaper for the purpose of selecting the percentages of the various fractions (<63, 63, 71, 100, 200, 315, 500 μm). The samples were sized on an automatic vibratory sieve machine Retsch AS 200. More than 65% of the particles were determined to be under 100 μm. The focus was on microfractions of tropical wood dust (particles with a diameter of ≤100 µm) and on the impact assessment of particle size (particle size < 100 µm) on the minimum ignition temperatures of airborne tropical dust and dust layers. The minimum ignition temperature of airborne marblewood dust decreased with the particle size to the level of 400 °C (particle size 63 μm).


  • Open Access

    Tropical Wood Dusts—Granulometry, Morfology and Ignition Temperature

    by Miroslava Vandličková, Iveta Marková, Linda Makovická Osvaldová, Stanislava Gašpercová, Jozef Svetlík, Jozef Vraniak

    The article considers the granulometric analysis of selected samples of tropical wood dust from cumaru (Dipteryx odorata), padauk (Pterocarpus soyauxii), ebony (Diospyros crassiflora), and marblewood (Marmaroxylon racemosum) using a Makita 9556CR 1400 W grinder and K36 sandpaper, for the purpose of selecting the percentages of the various fractions (<63; 63; 71; 200; 315; 500 μm) of wood dust samples. Tropical wood dust samples were made using a hand orbital sander Makita 9556CR 1400 W, and sized using the automatic mesh vibratory sieve machine Retsch AS 200 control. Most dust particles (between 50–79%) from all wood samples were under 100 μm in size. This higher percentage is associated with the risk of inhaling the dust, causing damage to the respiratory system, and the risk of a dust-air explosive mixture. Results of granulometric fractions contribution of tropical woods sanding dust were similar. Ignition temperature was changed by particle sizes, and decreased with a decrease in particle sizes. We found that marblewood has the highest minimum ignition temperature (400–420 °C), and padauk has the lowest (370–390 °C).


  • Open Access

    Fire Characteristics of Upholstery Materials in Seats

    by Linda Makovická Osvaldová, Iveta Marková, Miroslava Vandlíčková, Stanislava Gašpercová, Michal Titko

    The article deals with selected upholstery flammability test materials that, in the case of fire, can cause fire spread. For the research, frequently used materials for upholstery based on polyester were utilized: imitation leather, suede, and microplush. Initiation of initiating spontaneous flammability with various sources of ignition were measured including a smoldering cigarette and a match flame. Results were measured as smoldering time and length of the burnt-though sample. Upholstery materials are an integral part of seat construction. To be used in transport, upholstered material must meet safety measures such as the strength, sanitariness, and fire resistance. All tests were performed in accordance with applicable technical standards. Impact assessment of the sample (weight) on “smoldering time” and “length of degradation” was carried out using an ANOVA. Significant differences in length of degradation was observed between samples. Tests cannot provide reliable information about the flammability course of the final product. Upholstery is composed of external covering, of inner liner, and padding. Results of the research presented in this paper indicate the need to continue the research in a broader aspect.


  • Effect of Thermal Loading on Various Types of Wood Beams

    by Stanislava Gašpercová, Miroslava Vandlíčková

  • Open Access

    The Evaluation of Flammability Properties Regarding Testing Methods

    by Linda Makovická Osvaldová, Stanislava Gašpercová

    In this paper, we address the historical comparison methods with current methods for the assessment of flammability characteristics for materials an especially for wood, wood components and wooden buildings. Nowadays in European Union brings harmonization in evaluated of standards into each European country and try to make one concept of evaluated the flammability properties. In each European country to the one standard level which will be used by evaluation of materials regarding flammability. In our article we focused mainly on improving the evaluation methods in terms of flammability characteristics of using materials at building industry. In the article we present examples of different assessment methods at their own test methods in terms of fire prevention. On the base of old compared of materials by STN, BS and DIN methods for testing materials on fire and new methods of evaluating the flammability properties regarding EU standards before and after starting the flash over.