KCKen Cho

Ken Cho

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ken Cho has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of Hierarchical Structure on Mechanical Properties of Additive Manufactured IN718 Alloys

    by Kippei Yamashita, Ken Cho, Takuma Saito, Taisuke Sasaki, Katsuhiko Sawaizumi, Masayuki Okugawa, Yuichiro Koizumi, Takayoshi Nakano, Hiroyuki Y. Yasuda

    Selective laser melting (SLM) can produce Ni-based superalloys with a unique hierarchical structure consisting of micrometer-scale crystallographic lamellar microstructure and nanometer-scale cellular structure under optimized process parameters. This work investigated the effects of input energy density on the morphology of the cells and its influence on the tensile properties of Ni-based superalloy prepared by SLM. We found that the cell spacing decreases with decreasing input energy density. Further investigation of the cells clarified that the boundary of cells is a low angle grain boundary with dislocation cell wall and segregation of certain elements such as Nb and Ti. Moreover, it was demonstrated that the boundary of cells performs as a significant barrier to the griding dislocation. Thus, the cell boundary leads to strong strengthening through the Hall-Petch law.


  • Open Access

    Microstructure Control of Lightweight Heat-Resistant TiAl Alloys via Metal Additive Manufacturing

    by Ken Cho, Nakamoto Hiroyuki, Hiroyuki Y. Yasuda, Masao Takeyama, Takayoshi Nakano

  • Open Access

    Microstructure Evolution of Gas-Atomized β-Solidifying γ-TiAl Alloy Powder during Subsequent Heat Treatment

    by Sung-Hyun Park, Ozkan Gokcekaya, Ryosuke Ozasa, Ken Cho, Hiroyuki Y. Yasuda, Myung-Hoon Oh, Takayoshi Nakano

    To promote the use of γ-TiAl alloys in various domains, such as the aerospace industry, it is pivotal to investigate the unusual phase transformation from rapidly solidified and metastable γ-TiAl toward the equilibrium state. In this study, the microstructure characteristics of gas-atomized β-solidifying Ti-44Al-6Nb-1.2Cr alloy powder, in terms of the effect of rapid solidification on microstructure evolution, were explored in comparison with cast materials. The phase constitution, morphology, and crystallographic orientation between phases were noted to be distinct. Furthermore, subsequent heat treatment was conducted at different temperatures using gas-atomized powder. The transition from the metastable to equilibrium state was observed, wherein firstly, the γ phase precipitated from the retained α2 phase, forming an α2/γ lamellar microstructure. In intensified heat-treatment conditions adequate for cellular reaction, β/γ cells were formed at the grain boundaries of α2/γ lamellar colonies. The findings highlight the overall phase transformation during rapid solidification and continuous microstructural evolution from the nonequilibrium to the equilibrium state. This research can bridge the gap in understanding the effect of the solidification rate on microstructural evolution and contribute to enhanced comprehension of the microstructure in other domains involving rapid solidification, such as the additive manufacturing of γ-TiAl alloys.


  • Open Access

    Improving the Tensile Properties of Additively Manufactured β-Containing TiAl Alloys via Microstructure Control Focusing on Cellular Precipitation Reaction

    by Ken Cho, Hirotaka Odo, Keisuke Okamoto, Hiroyuki Y. Yasuda, Hirotoyo Nakashima, Masao Takeyama, Takayoshi Nakano

    The effect of a two-step heat treatment on the microstructure and high-temperature tensile properties of β-containing Ti-44Al-4Cr (at%) alloys fabricated by electron beam powder bed fusion were examined by focusing on the morphology of α2/γ lamellar grains and β/γ cells precipitated at the lamellar grain boundaries by a cellular precipitation reaction. The alloys subjected to the first heat treatment step at 1573 K in the α + β two-phase region exhibit a non-equilibrium microstructure consisting of the α2/γ lamellar grains with a fine lamellar spacing and a β/γ duplex structure located at the grain boundaries. In the second step of heat treatment, i.e., aging at 1273 K in the β + γ two-phase region, the β/γ cells are discontinuously precipitated from the lamellar grain boundaries due to excess Cr supersaturation in the lamellae. The volume fraction of the cells and lamellar spacing increase with increasing aging time and affect the tensile properties of the alloys. The aged alloys exhibit higher strength and comparable elongation at 1023 K when compared to the as-built alloys. The strength of these alloys is strongly dependent on the volume fraction and lamellar spacing of the α2/γ lamellae. In addition, the morphology of the β/γ cells is also an important factor controlling the fracture mode and ductility of these alloys.


  • Open Access

    Influences of Mo addition on mechanical properties and deformation behavior of β-type Ti alloys

    by K. Cho, R. Morioka, H.Y. Yasuda

    The influences of Mo addition on the tensile properties and deformation behavior of β-type Ti-Mn alloys were investigated with particular focus on {332} deformation twinning. We found that Ti-7Mn and Ti-5Mo-3Mo alloys exhibit completely different tensile properties, despite having the same microstructure and stability of the β phase. The Ti-5Mn-3Mo alloy demonstrates higher tensile strength and larger ductility than the Ti-7Mn alloy due to its strong work hardening, caused by {332} deformation twinning. The critical resolved shear stress (CRSS) for {332} deformation twinning in these alloys was measured by compression tests using single crystals. It was thereby found that Mo addition is effective in decreasing the CRSS for {332} deformation twinning in Ti-Mn alloys.